Nonaqueous capillary electrophoresis in pharmaceutical analysis

This review presents different solvents and electrolytes commonly used as BGEs in NACE for the analysis of pharmaceutical compounds. Most NACE applications carried out since 1998 for the analysis of compounds of pharmaceutical interest are presented in four tables: (i) analysis of drugs and related substances, (ii) analysis of chiral substances, (iii) analysis of phytochemical extracts and (iv) analysis of drugs in biological fluids. These selected examples are used to illustrate the interest in NACE versus conventional aqueous CE.     

Nonaqueous capillary electrophoresis using a titania-coated capillary

In this work, an ordered mesoporous titania film was introduced to coat a capillary by means of the sol-gel technique. Its electroosmotic flow (EOF) property was investigated in a variety of nonaqueous media (methanol, formamide and N,N'-dimethylformamide and mixtures of methanol and acetonitrile). The titania-coated capillary exhibited a distinctive EOF behavior, the direction and magnitude of which were strongly dependent on various parameters such as the solvent composition, apparent pH (pH*) and the electrolytes. The nonaqueous capillary electrophoresis separation of several alkaloids was investigated in the positively charged titania-coated capillary. Comparison of separation between coated and uncoated capillaries under optimal nonaqueous conditions was also carried out.     

Nonaqueous capillary electrophoresis for the analysis of selected tropane alkaloids in a plant extract

Summary The potential of nonaqueous capillary electrophoresis has been investigated for the separation of structurally similar tropane alkaloids. The effects of the organic solvent and of electrolyte composition on separation selectivity, migration times, and efficiency are described. The addition of trifluoroacetic acid to the separation buffer was found beneficial for manipulation of the order of migration of the two positional isomers littorine and hyoscyamine. Replicate injections under nonaqueous conditions gave migration time and peak area data of excellent precision. The application of the optimized conditions to the analysis of hyoscyamine and scopolamine in genetically transformed root cultures ofDatura candida x D. aurea is presented.     

Nonaqueous capillary electrophoresis equipped with amperometric detection for analysis of chlorinated phenolic compounds

Nonaqueous capillary electrophoresis (NACE) equipped with amperometric detection has been developed for separation and detection of an 11-member model mixture of chlorinated phenolic compounds. With triacetyl-beta-cyclodextrin (TACD) as a novel selectivity selector, acetonitrile proved to be an excellent solvent for this water-insoluble cyclodextrin derivative. Resolution of the analytes was achieved by using an optimized acetonitrile medium consisting of 500 mM acetic acid, 10 mM sodium acetate, 12 mM TACD and 50 mM tetrabutylammonium perchlorate. Separation of analytes was attributed to differential electrostatic and/or inductive interactions of the analytes with the TACD/TBA+ complex and charged tetrabutylammonium phases. A simple end-column amperometric detector (Pt vs. Ag/AgCl, poised at +1.6 V) in conjunction with NACE was used to analyze chlorophenols. Amperometric detection of such target compounds in acetonitrile-based media offers high sensitivity and alleviates electrode fouling compared to aqueous buffers. The detection limits obtained, ranging from 30 nM to 500 nM, are 3-8-fold lower than those obtained with aqueous buffers.     

Nonaqueous capillary electrophoresis with indirect electrochemical detection

Nonaqueous capillary electrophoresis (NACE) which makes use of organic solvents in place of conventional aqueous electrophoresis buffers is gaining increasing importance among modern separation techniques. Recently, it has been shown that amperometric detection in conjunction with acetonitrile-based NACE offers an extended accessible potential range and an enhanced long-term stability of the amperometric responses generated at solid electrodes. The present contribution takes advantage of the latter aspect to develop reliable systems for NACE with indirect electrochemical detection (IED). In this context, several compounds such as (ferrocenylmethyl)trimethylammonium perchlorate, tris(1,10-phenanthroline)cobalt(III) perchlorate and bis(1,4,7-triazacyclononane)nickel(II) perchlorate were studied regarding their suitability to act as electroactive buffer additives for IED in NACE. The performance characteristics for the respective buffer systems were evaluated. Tetraalkylammonium perchlorates served as model compounds for the optimization of the NACE-IED system. Target analytes choline and acetylcholine could easily be separated and determined by means of NACE-IED. In the case of a buffer system containing 10(-4) M tris(1,10-phenanthroline)cobalt(III) perchlorate the limits of detection were 2.5 x 10(-7) M and 4.6 x 10(-7) M for choline and acetylcholine, respectively. With the elaborated analytical procedure choline could be determined in pharmaceutical preparations.     

Nonaqueous capillary electrophoresis of dextromethorphan and its metabolites

This study deals with the nonaqueous capillary electrophoretic separation of dextromethorphan and its metabolites using a methanolic background electrolyte. The optimization of separation conditions was performed in terms of the resolution of dextromethorphan and dextrorphan and the effect of separation temperature, voltage, and the characteristics of the background electrolyte were studied. Complete separation of all analytes was achieved in 40 mM ammonium acetate dissolved in methanol. Hydrodynamic injection was performed at 3 kPa for 4 s. The separation voltage was 20 kV accompanied by a low electric current. The ultraviolet detection was performed at 214 nm, the temperature of the capillary was 25°C. These conditions enabled the separation of four analytes plus the internal standard within 9 min. Further, the developed method was validated in terms of linearity, sensitivity, and repeatability. Rat liver perfusate samples were subjected to the nonaqueous capillary electrophoretic method to illustrate its applicability.     

Nonaqueous and aqueous capillary electrophoresis of synthetic polymers

In this work, the use of capillary electrophoresis (CE) to analyze synthetic polymers is reviewed including works published till February 2004. The revised works have been classified depending on the CE mode (e.g., free solution capillary electrophoresis, capillary gel electrophoresis, etc.) and type of buffer (i.e., nonaqueous, aqueous and hydro-organic background electrolytes) employed to separate synthetic macromolecules. Advantages and drawbacks of these different separation procedures for polymer analysis are discussed. Also, physicochemical studies of complex polymer systems by CE are reviewed, including drug release studies, synthetic polyampholytes, dendrimers, fullerenes, carbon nanotubes and associative copolymers.     

Nonaqueous capillary electrophoresis method for the analysis of gleevec and its main metabolite in human urine

The viability of nonaqueous capillary electrophoresis (NACE) was investigated for determination of gleevec and its main metabolite in human urine using a fused-silica capillary. Baseline separation of the studied solutes was obtained using a nonaqueous solution composed of 12 mM ammonium acetate and 87.6 mM acetic acid in methanol-acetonitrile (ACN) (80:20, v:v) providing analysis time shorter than 3 min. Different aspects including stability of the solutions, linearity, accuracy and precision were studied in order to validate the method in the urine matrix. Detection limits of 24 microg L(-1) for gleevec and its metabolite were obtained. A robustness test of the method was carried out using the Plackett-Burman fractional factorial model with a matrix of 15 experiments. The developed method is simple, rapid and sensitive and has been used to determine gleveec and its metabolite at clinically relevant levels in human urine. Before NACE determination, a solid-phase extraction (SPE) procedure with a C18 cartridge was necessary. Real determination of these analytes in two patient urines were done.     

Nonaqueous media for separation of nonionic organic compounds by capillary electrophoresis

For the separation of neutral compounds by micellar electrokinetic chromatography, separations are usually carried out in predominantly aqueous solution in order to preserve the charged micelle necessary for the separation. We now show that polycyclic aromatic hydrocarbon (PAH) compounds can be separated efficiently by capillary electrophoresis in pure methanol or in aqueous-organic mixtures containing a high percentage of methanol. Sodium tetradecyl sulfate was the preferred surfactant. The effects of pH, solvent composition, surfactant structure, and surfactant concentration on the separations were studied. Reproducible migration times and linear calibration plots were obtained.     

Nonaqueous capillary electrophoresis of imatinib mesylate and related substances

In the present study, nonaqueous capillary electrophoretic separation of imatinib mesylate (IM) and related substances, N-(5-amino-2-methylphenyl)-4-(3-pyridyl)-2-pyrimidinamine (PYA), N-(4-methyl-3-(4-(pyridin-3-yl)pyrimidin-2-ylamino)phenyl)-4-((piperazin-1-yl)methyl) benzamide (NDI) and 4-chloromethyl-N-(4-methyl-3-((4-(pyridin-3-yl) pyrimidin-2-yl) amino) phenyl) benzamide (CPB) was developed. The influential factors affecting separation, including type and concentration of the electrolyte, applied voltage, and buffer modifier were investigated. Baseline separation of the studied analytes was obtained using a buffer of 50 mM Tris and 50 mM methanesulfonic acid in methanol at a apparent pH (pH*) of 1.65. To enhance the sensitivity, large-volume sample stacking was employed for online concentration. The strongest analytical signal with a suitable separation was achieved when the injection time was 100 s. The linearity ranges of PYA and NDI were 0.100-2.50 μg mL(-1) , and that of CPB was 0.125-2.50 μg mL(-1) , with good coefficients (r(2) > 0.9948). The relative standard deviations of intra- and interday were satisfactory. Under the optimized conditions, seven batches of the synthesized samples were analyzed and CPB was detected in two batches. Owing to its simplicity, effectiveness, and low price, the developed method is promising for quality control of IM.     

Recent advances in capillary electrophoresis for biomarker discovery

The use of non-invasive methods for detecting biomarkers opens a new era in patient care, since clinical investigators have long been searching for accurate and reproducible measurements of putative biomarkers. There are many factors which make this research challenging, beginning with lack of standardization of sample collection and continuing through the entire analytical procedure. Among the variety of methods so far used for biomarker screening, capillary electrophoresis represents a robust, reliable, and widely used analytical tool. This review will focus on recent applications of CE to the analysis of body fluids and tissues for identification of biomarkers.     

Nonaqueous capillary electrophoresis method for the analysis of tamoxifen, imipramine and their main metabolites in urine

The viability of nonaqueous capillary electrophoresis (NACE) was investigated for the simultaneous determination of tamoxifen, imipramine and their main metabolites (4-hydroxytamoxifen and desipramine, respectively). Baseline separation of the studied solutes was obtained on a 57 cm × 75 μm capillary using a nonaqueous solution composed of 17 mM ammonium acetate and 1.25% acetic acid in 80:20 (v:v) methanol-acetonitrile, temperature and voltage 22 °C and 15 kV, respectively, and hydrodynamic injection. Paroxetine was used as internal standard. Different aspects including linearity, accuracy, ruggedness and precision was studied. Detection limits between 9.0 and 15.0 μg L⁻¹ were obtained for all the studied compounds. The developed method is simple, rapid and sensitive and has been used to determine tamoxifen, imipramine and their metabolites at clinically relevant levels in human urine. Before NACE determination, a solid phase extraction (SPE) procedure with a C₁₈ cartridge was necessary. Real determination of these analytes in three females urines were done.     

Nonaqueous capillary electrophoresis conditions for the simultaneous separation of eight alpha-adrenergic blocking agents

The analysis is described for the first time for separating eight alpha-adrenergic blocking agents (oxymetazoline, 5-methylurapidil, prazosin, phentolamine, RS-17053, methoxamine, yohimbine, and BMY7378) by capillary electrophoresis (CE) with UV detection. Optimum separation of the analytes was obtained on a 50 cm × 75 μm i.d. capillary using a buffer containing 20% acetonitrile, 60 mM ammonium acetate, and 1.0% glacial acetic in methanol medium, with applied voltage and capillary temperature of 23 kV and 25 °C, respectively. The relative standard deviations of the migration times and the peak areas of the eight analytes were in the ranges of 0.12–1.29% and 1.02–2.53%, respectively. Detection limits of oxymetazoline, 5-methylurapidil, prazosin, phentolamine, RS-17053, methoxamine, yohimbine, and BMY7378 were 0.5–1.0 μg mL⁻¹. In the tested concentration range, good linear relationships (correlation coefficients >98%) between peak areas and concentrations of the analytes were observed. This method has been successfully applied for determination of prazosin and phentolamine with recoveries of 97.30% and 98.12%, respectively. The proposed method was successfully applied for the rapid CE determination of the frequently applied alpha-adrenergic blocking compounds phentolamine and prazosin in general pharmaceutical preparation.     

Nonaqueous affinity capillary electrophoresis investigation of small molecule molecular recognition

The conditional binding constants for a bis-guanidinium-like receptor and a series of dicarboxylate ligands have been determined in two buffer/solvent systems, namely 25 mM ammonium acetate/1% acetic acid in acetonitrile/methanol (7:3 v:v) and 30 mM N-methyl morpholine/15 mM methanesulfonic acid in acetonitrile/methanol (9:1 v:v). The latter buffer has not been applied before in capillary electrophoresis. The binding constants in both solvent systems decrease as the dicarboxylate length increases. The binding constants are larger in the less competitive N-methyl morpholine buffer. The dicarboxylates associate only weakly with a dicationic analog of the receptor, p-xylyl trimethylammonium, which is not a hydrogen bond donor.     

Nonaqueous capillary electrophoresis: a versatile completion of electrophoretic separation techniques

Nonaqueous capillary electrophoresis (NACE) is the application of a conductive electrolyte dissolved in either one organic solvent or a mixture of several organic solvents to carry out zone electrophoresis or related techniques in fused-silica capillaries. A complete review on the fundamentals, the optimization of analytical methods, practical considerations, and applications is given. To explain the differences to CE in aqueous media, a brief summary on solvent properties and molecular interactions in solutions introduces the reader into these fields. The use of additives to tune separation selectivity by means beyond a pure zone-electrophoretic mechanism is discussed in detail for organic media. Special detection techniques providing high potential for NACE are presented. Data on the precision of NACE methods and a list of relevant applications are included. More specialized applications like the determination of physicochemical constants in NACE or the setup of a semipreparative mode are described.     

Nonaqueous capillary electrophoresis in coated capillaries: an interesting alternative for proteomic applications

This work brings together some contributions for the use of nonaqueous media for proteomic analysis, for both capillary electrophoresis (CE) separation and the preparation of tryptic digests. First, a ternary nonaqueous buffer consisting of 60/30/10 v/v methanol/acetonitrile/acetic acid with 12.5 mmol/L ammonium acetate was optimized for CE separation of the tryptic digest of lysozyme. Lysozyme was chosen as a model system for the protein digestion, which has also been prepared in an organic-rich medium with methanol/50 mmol/L NH(4)HCO(3), pH 8.0 (60/40 v/v). The separation results were compared to in silico (PeptideCutter program) digestion conditions, and high-efficiency peak separation (18 peaks) was obtained in 20 min with an electric field of 350 V/cm. In addition, we have evaluated the stability of a coated capillary with poly-N,N-dimethylacrylamide (60/30 cm total/effective length and 75 microm ID) for over 100 runs of tryptic digest with the nonaqueous background electrolyte solvent system. The migration times for ten selected peptide peaks presented 3-7% relative standard deviation.     

Nonaqueous capillary electrophoresis: application possibilities and suitability of various solvents for the separation of basic analytes

Eleven organic solvents were tested for their suitability in the use of capillary electrophoresis (CE). In all cases, 25 mM ammonium acetate and 1 M acetic acid were used as electrolytes. Three basic therapeutical agents, propranolol, carteolol and imipramine, were used as analytes. Four solvents (2-propanol, ethylene glycol, propylene glycol, dichloromethane) were not suitable for use with CE under our conditions. Depending on the other solvents used, the analytes showed very different behavior. We observed that the epsilon/eta quotient alone is not sufficient for a characterization of the solvents. Further investigations with all the solvents as 1:1 mixtures with methanol were carried out. As a result some principal changes occurred compared to the pure solvents. Working with mixtures of different solvents proved to be advantageous because of the possibility to influence properties like high viscosity or low ionizing abilities by the addition of a suitable second solvent.     

Applications of capillary electrophoresis for industrial analysis

Capillary electrophoresis techniques, particularly isotachophoresis and zone electrophoresis, are useful for the determination of various analytes in a wide range of sample matrices. This paper reports applications of capillary electrophoresis developed for detergent, food additive, herbicide, animal nutrition and biotechnology samples. Major advantages of capillary electrophoresis include versatility and speed of method development. Options for small ion analysis using modern, fused silica capillary instruments are discussed.     

Pesticide analysis by capillary electrophoresis

In this work, a critical and updated revision of the current situation of the analysis of pesticides by Capillary Electrophoresis (CE) is presented. The review has been written in two main sections. The first one presents a thorough revision of the various offline and on-line sample preconcentration procedures that have been used in conjunction with CE to analyze these compounds. The second part reviews the various detection strategies (i.e., UV, LIF, MS, and electrochemical) and CE modes that have been applied to the analysis of pesticides. Future trends that can be expected from this hot research area are also discussed.