Molecular self-assembled monolayers of ruthenium(II)-terpyridine dithiol complex on gold electrode and nanoparticles

We describe the formation of stable dithiol-bifunctionalized Ru(II)-terpyridine monolayer onto gold electrode. The coverage-dependent behavior onto gold electrode has been studied by electrochemical technique. The stability, surface charge coverage, and electron-transfer kinetics were assessed by cyclic voltammetry. Functionalized monolayer-protected Au clusters (MPCs) were also prepared. The spectroscopic characterization data of MPCs using UV-Vis and TEM techniques are discussed. TEM images showed that functionalized spherical nanoclusters of 4.7 ± 0.3 and 4.3 ± 0.2 nm were produced. The particle sizes are uniform with a narrow size distribution. The morphology of Au(1 1 1) metal surface modified with MPCs was imaged using atomic force microscopy (AFM). The nanoparticle layer exhibits a distinct surface morphology, irregularly shaped domains with dimensions from 20 to 60 nm and root mean square heights of 2.401 nm.     

Morphological evolution of multistage polymer particles in the alkali post-treatment

Multistage carboxyl-containing polymer latex particles were synthesized by multistep emulsion copolymerization using methyl methacrylate (MMA), butyl acrylate (BA), methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA) and styrene (St) as raw materials, and the latex particles with diverse morphologies including multihollow, hollow and “bowl-like” were obtained by post-treating the multistage latex particles under alkali condition. The morphological evolution of the particles in the alkali post-treatment process was characterized with electron microscopy, and effects of alkali treatment conditions including treatment temperature, time as well as initial pH on particle morphology were investigated. Results indicated that the alkali treatment temperature and initial pH were the key parameters to control the morphology of the treated particles. When the alkali treatment temperature was below 60 °C or the initial pH was lower than 8.5, the particle morphology was almost unchanged no matter how long the treatment time was prolonged. The multihollow and hollow particles could be formed as alkali treatment temperature exceeded 60 °C in the range of initial pH from 8.8 to 9.5. While the latex particles with “bowl-like” morphology were observed when the multistage latex was alkali treated at 90 °C for 3 h with initial pH 9.8. Furthermore, extending alkali treatment time was beneficial to get the swelling equilibrium of the latex particles.     

Characterisation of a hydraulic high-pressure sample introduction assisted flow injection-inductively coupled plasma time-of-flight mass spectrometry system and its application to the analysis of biological samples

A flow injection (FI) method was developed using hydraulic high-pressure nebulization as a sample introduction system, coupled to inductively coupled plasma time-of-flight mass spectrometer (ICP-TOFMS) for rapid and simultaneous determination of 19 elements. The operating conditions of the system (analyte flow rate, heating and cooling temperatures of the desolvation module, carrier gas flow rate) for the simultaneous determination of 19 analytes were optimised. The optimum parameters of the sample introduction system were found to be 1.4 ml min⁻¹ and 1.35 l min⁻¹ for the analyte solution and nebulizer flow rates, respectively. A compromised condition for heating and cooling stage temperatures of 170 and −5 °C was chosen. The detection limits were compared to those obtained by using ICP-TOFMS with alternative sample introduction techniques e.g. conventional nebulization, flow injection chemical hydride generation (FI-CHG) and the obtained results were comparable or better than those resulting from alternative sample introduction. Applying the optimised conditions the simultaneous determination of Ag, As, Ba, Cd, Co, Cu, Ga, In, Li, Mn, Mo, Pb, Sb, Se, Sn, Sr, Tl, V and Zn was carried out. Absolute detection limits (3σ) in the range of 2-750 pg and precision between 0.5 and 9.6% from five replicate measurements of 10 ng ml⁻¹ multielemental sample solutions were achieved by using a 200 μl sample loop. The developed method was applied for the analysis of certified reference materials of biological origin (TORT-2 “Lobster Hepatopancrease”, BCR-422 “Cod Muscle” and IAEA MA-B-3/TM “Fish Homogenate”), and the results showed good agreement with the certified values.     

Temperature effect of electrochemically roughened gold substrates on polymerization electrocatalysis of polypyrrole

In this work, electrochemical methods were used to prepare complexes with Au and Cl species on bulk Au substrates. Then the electrochemically roughened Au substrates were further heat-treated at different temperatures. The effect of temperatures used in heat treatments between 25 and 100 °C on electrocatalytical polymerization of polypyrrole (PPy) formed on the prepared gold substrates was first investigated. The result indicates that the optimally electrocatalytical capability of the heat-treated Au substrate for PPy polymerization is at 75 °C. Moreover, the autopolymerized PPy on the roughened Au substrate treated at 75 °C demonstrates the highest oxidation level and oxidation degree of 0.32 and 0.50, respectively. Primary results indicate that complexes with positively charged Au act as oxidants, and perchlorate and chloride ions act as dopants for the oxidation-polymerization of PPy.     

Direct evidence of chemical effect of surface-enhanced Raman scattering observed on electrochemically prepared rough gold substrates

In this study, polypyrrole (PPy) films were electrochemically deposited on gold substrates roughened by an electrochemical triangular-wave oxidation-reduction cycles (ORC) in an aqueous solution containing 0.1N KCl. Then the substrates were heated from 25 to 50 °C and the corresponding SERS performances of PPy were observed in situ. The results indicate that the SERS enhancement capabilities of substrates are gradually raised from 25 °C to a maximum at 40 °C and monotonically decreased from 40 to 50 °C. These SERS enhancement capabilities ascribed to the charge transfers from PPy to Au, which are responsible for the chemical effects of SERS mechanisms, are successfully observed via SERS and high resolution X-ray photoelectron spectroscopy (HRXPS) analyses. The variation in content of the oxidized PPy peak of the double peaks in the range of 1000-1150 cm⁻¹ in SERS spectrum obtained on an Au substrate at different temperatures is consistent with its corresponding variation in the SERS intensity of PPy. The variation in content of the oxidized nitrogen of PPy deposited on an Au substrate at different temperatures revealed from an HRXPS analysis also confirms this consistence.     

Evaluation of the factors affecting extraction of organic compounds based on the acid-induced phase cloud point approach

On the basis of a better analytical exploitation of acid-induced cloud point approach, a systematic study on the phase behaviour of acid aqueous solutions of anionic surfactants and factors affecting anionic surfactant-mediated extractions was performed. The anionic surfactants investigated were alkylsulphonates (ASS) with alkylchain lengths comprised between 8 and 16 carbon atoms. The critical hydrochloric acid concentration (minimal acid concentration required to separation in two liquid phases) was found to increase as alkylchain length of the anionic surfactant increased from 10 to 14. Non-acid-induced liquid-liquid phase separation was observed for sodium octanesulphonate (SOS) or sodium hexadecyl sulphonate (SHS) in the hydrochloric concentration range 0-10 M. Acid aqueous solutions of sodium decylsulphonate (SDeS) and sodium dodecylsulphonate (SDoS) separated into two liquid phases at temperatures ranging between 10 and 80 °C, while temperatures >35 °C were required for sodium tetradecylsulphonate. The influence on extraction efficiency and concentrating ability of experimental variables such as hydrophobicity and concentration of surfactant, nature and concentration of analyte, hydrochloric acid concentration, time and temperature of extraction and time of equilibration and centrifugation was examined. Advantages provided by anionic surfactant-mediated extractions over the use of non-ionic surfactants (cloud point extractions) are discussed.     

Synthesis and characterization of bimetallic Ni-Cu particles

Bimetallic Ni-Cu particles were synthesized from either suspensions of nickel carbonate and copper carbonate, and solutions of nickel nitrate and copper nitrate in ethylene glycol which acts both as solvent and reducing agent. The nature and composition of the powders depend on both the reaction temperature and time, and the reactants. Using the carbonates, bimetallic Ni-Cu powders composed of a nickel-rich and a copper-rich solid solution were obtained after 39 h at 140°C. Increasing the reaction temperature to 190°C gives a Ni-Cu powder composed of a copper-rich solid solution and nickel. Particles obtained under these conditions, however, are polydisperse. The nitrate solution gave bimetallic Ni-Cu particles with a narrow size distribution of about 140 nm after 4 h of reaction at 196°C. These particles are made of a copper core and a nickel shell. The mechanism of bimetallic particle formation is controlled by the solubility of the reactants, the formation of intermediate metal glycolates and Cu₂O, and the required reduction temperature.     

Pyrolysis of chromated copper arsenate (CCA) treated wood waste at elevated pressure: Influence of particle size, heating rate, residence time, temperature and pressure

Lab-scale pyrolysis experiments with weathered CCA treated wood chips have been performed and the influence of particle size, residence time (10-40 min), heating rate (5-20 °C/min), temperature (330-430 °C) and pressure (0 bar, 5 bar) has been investigated. Few data, covering the pyrolysis of weathered wood was found in the literature and the literature data on pyrolysis experiments with a controlled CCA wood input, showed that results were often highly affected by experimental uncertainty. In order to reduce the uncertainty on the results, a thorough characterization of the wood input has been performed and a ratio method has been proposed which allows to study the effect of particle size on arsenic and chromium volatilization. Larger wood particles show a higher arsenic and chromium retention during pyrolysis which is attributed to the higher mass transfer resistance in these particles. Residence time has a limited effect on arsenic retentions. Increasing heating rate results in a limited increase in arsenic retentions and a more profound increase in chromium retentions. The latter is attributed to a lower average particle temperature during heating caused by the thermal lag in larger particles. Elevated pressure results in a significant increase of arsenic retentions, which is probably due to higher mass transfer resistance. Increasing temperature results in a slight decrease in arsenic retentions till 390 °C, with a sharp decrease at higher temperatures. Chromium retentions are less affected by increasing temperature, especially at higher temperatures. To conclude, a mechanism is proposed for the volatilization of chromium and arsenic during low temperature pyrolysis of CCA wood. Mass transfer resistance and the formation of As₄O₆ are crucial for the control of arsenic volatilization, while heat transfer resistance and thermal lag are more important for the control of chromium volatilization.     

Morphology control of soap-free seeded P(St-EA-AA) latex particles

Soap-free poly(styrene-ethyl acrylate-acrylic acid) latex particles with narrow size distribution and with surface carboxyl groups were synthesized by semicontinuous emulsion polymerization, and the particles with homogeneous multihollow structure were obtained after alkali posttreatment. Effects of treatment conditions and crosslinking agents on particle morphology were investigated. Results showed that the multihollow structure can be formed inside the uncrosslinked particles only when the treatment temperature exceeded 50 °C, the pH was higher than 10.0, the amount of 2-butanone was more than 3.0 ml and the treatment time was longer than 30 min. Furthermore, the volume expansion of the particles increased with the temperature increased to 90 °C, the pH to 12.5 or the amount of 2-butanone to 7.0 ml, and this value increased first and then decreased with the treatment time prolonged. Fine pores can be generated in the shell of particles crosslinked by 0.2 g of ethyl glycol dimethylacrylate (EGDMA), while no hollow structure formed inside particles when 0.4 g of EGDMA or 0.2 g of divinyl benzene was used.     

Characteristics of soot particles formed by diesel pyrolysis

This experiment involving diesel fuel pyrolysis was performed to study the process of soot formation without oxidation. The effects of temperature, residence time, and lubricating oil presence on soot formation were investigated through measurement of particle size distribution, morphology, and C/H ratio as well as through thermal analysis. The results show that the formation of soot during diesel pyrolysis depended strongly on both temperature and residence time. The critical temperature for the creation of soot with a primary particle diameter of 20 nm was about 1100 °C. Greater temperatures and residence times resulted in diesel soot particles that were more mature, i.e., with a higher C/H ratio, larger particle size, and higher ignition temperature. The carbonization of diesel soot through pyrolysis was also weakly affected by the addition of 5% lubricating oil to the diesel fuel. The results of this experiment provide information for modeling the formation of diesel soot without oxidation as well as for developing soot generators for after-treatment systems.     

Preparation and electrocatalytic activities of platinum nanoclusters deposited on modified multi-walled carbon nanotubes supports

Multi-walled carbon nanotubes (MWNTs) were modified by oxyfluorination treatment at several different temperatures of 20, 100, 200, and 300 °C. The changes of surface properties of oxyfluorinated MWNTs were investigated using X-ray photoelectron spectroscopy (XPS) method. As a result, it was found that surface fluorine contents were varied with changing an oxyfluorination temperature and showed a maximum value at 100 °C. By changing the treatment temperature in the process of oxyfluorination for carbon supports, the surface characteristics of MWNTs had been modified, resulting that the size and loading content of deposited Pt on the modified carbon supports could be changed. Consequently, Pt deposited MWNTs that were treated at 100 °C (Pt/100-MWNTs) showed the best electroactivity among samples. The enhanced electroactivity was dependent on the higher surface area of electrochemical reaction for metal catalyst, which was related to the particle size and the morphology of the deposited particle catalysts.     

Probing the kinetic performance limits for ion chromatography. I. Isocratic conditions for small ions

The first use of the kinetic plot method to characterise the performance of ion-exchange columns for separations of small inorganic anions is reported. The influence of analyte type (mono- and divalent), particle size (5 and 9 μm), temperature (30 and 60 °C) and maximum pressure drop upon theoretical extrapolations was investigated using data collected from anion-exchange polymeric particulate columns. The quality of extrapolations was found to depend upon the choice of analyte, but could be verified by coupling a series of columns to demonstrate some practical solutions for ion chromatography separations requiring relatively high efficiency. Separations of small anions yielding 25–40,000 theoretical plates using five serially connected columns (9 μm particles) were obtained and yielded deviations of <15% from the kinetic plot predictions. While this approach for achieving high efficiencies results in a very long analysis time (t₀ = 21 min), separations yielding approximately 10,000 theoretical plates using two serially connected columns (t₀ < 5 min) were shown to be more practically useful for isocratic separations when compared to use of a single column operated at optimum linear velocity (t₀ > 10 min).     

Preparation and characterization of single-hole macroporous organogel particles of high toughness and superfast responsivity

Crosslinked macroporous polymer particles containing a single large hole in their surfaces were prepared by solution crosslinking of butyl rubber (PIB) in benzene using sulfur monochloride (S₂Cl₂) as a crosslinking agent. The reactions were carried out within the droplets of frozen solutions of PIB and S₂Cl₂ at −18 °C. Spherical millimeter-sized organogel beads with a polydispersity of less than 10% were obtained. The particles display a two phase morphology indicating that both cryogelation and reaction-induced phase separation mechanisms are operative during the formation of the porous structures. The beads exhibit moduli of elasticity of 1-4 kPa, much larger than the moduli of conventional nonporous organogel beads formed at 20 °C. The gel particles also exhibit fast responsivity against the external stimulus (solvent change) due to their large pore volumes (4-7 ml/g). The gel beads prepared at −18 °C are very tough and can be compressed up to about 100% strain during which almost all the solvent content of the particles is released without any crack development. The sorption-squeezing cycles of the beads show that they can be used in separation processes in which the separated compounds can easily be recovered by compression of the beads under a piston.     

Acrylic emulsifier-free emulsion polymerization containing hydrophilic hydroxyl monomer in the presence or absence of nano-SiO2

The acrylic emulsifier-free emulsion polymerization containing hydrophilic hydroxyl monomer (23 wt.%) in the presence or absence of nano-SiO₂ particles was studied. The effects of reaction temperature, level of nano-SiO₂, variation of core monomer composite on the coagulum, particle size and monomer conversion were investigated. Transmission electron microscopy (TEM) was used to observe the particle morphology in the presence of nano-SiO₂ particles. It showed that the systems produced larger size of particles than that with emulsifier, and the addition of nano-SiO₂ particles increased the particle size but decreased the coagulum. When polymerization temperature rose from 65 °C to 80 °C, the coagulum produced decreased greatly irrelative of the existence of nano-SiO₂, and the particle size decreased with nano-SiO₂ but increased without nano-SiO₂. The increase of level of acrylic acid (AA) and 2-hydroxyethyl methacrylate (HEMA) in core monomer composite all decreased particle sizes; furthermore, the level of AA had more efficiency than the level of HEMA irrespective of the existence of nano-SiO₂ particle.     

Size sorting of Au and Pt nanoparticles from arbitrary particle size distributions

A K₂BSPP (dipotassium bis(p-sulfonatophenyl)phenylphosphane dihydrate)-based method to sort and size refine Au and Pt nanoparticles has been developed. It makes use of K₂BSPP to impart graduated stability to the nanoparticles in a number of NaCl solutions. The method offers a systematic approach to preparing metal nanoparticles of small diameters and a narrow size distribution from an arbitrary particle size distribution. TEM investigations confirmed the size refinement efficacy of this treatment method: in a typical experiment, the mean particle size and relative standard deviation of Au nanoparticles after three successive treatments were 5.18 and 0.055 nm, respectively, down from the corresponding values of 8.22 and 0.26 nm from the initial untreated nanoparticle solution. The K₂BSPP-based size refinement procedure is a simple alternative to more complex chemical procedures and stringent process control that are currently required for the preparation of mono-dispersed systems.     

Simultaneous determination of bromine and chlorine in coal using electrothermal vaporization inductively coupled plasma mass spectrometry and direct solid sample analysis

A new method for the direct analysis of coal using electrothermal vaporization inductively coupled plasma mass spectrometry and direct solid sample analysis was developed, aiming at the determination of Br and Cl. The procedure does not require any significant sample pretreatment and allows simultaneous determination of both elements to be carried out, requiring small mass aliquots of sample (about 0.5 mg). All operating parameters, including carrier gas flow-rate and RF power, were optimized for maximum sensitivity. The use of modifiers/aerosol carriers (Pd, Pd + Al and Pd + Ca) was evaluated, and the mixture of Pd and Ca was chosen, allowing pyrolysis and vaporization temperatures of 700 °C and 1900 °C, respectively. Chlorine was accurately determined using calibration against solid standards, whereas Br could also be determined using calibration against aqueous standard solutions. The limits of quantification were 0.03 μg g⁻¹ for Br and 7 μg g⁻¹ for Cl, and no spectral interferences were observed.     

Determination and interference studies of bismuth by tungsten trap hydride generation atomic absorption spectrometry

The determination of bismuth requires sufficiently sensitive procedures for detection at the μg L⁻¹ level or lower. W-coil was used for on-line trapping of volatile bismuth species using HGAAS (hydride generation atomic absorption spectrometry); atom trapping using a W-coil consists of three steps. Initially BiH₃ gas is formed by hydride generation procedure. The analyte species in vapor form are transported through the W-coil trap held at 289 °C where trapping takes place. Following the preconcentration step, the W-coil is heated to 1348 °C; analyte species are released and transported to flame-heated quartz atom cell where the atomic signal is formed. In our study, interferences have been investigated in detail during Bi determination by hydride generation, both with and without trap in the same HGAAS system. Interferent/analyte (mass/mass) ratio was kept at 1, 10 and 100. Experiments were designed for carrier solutions having 1.0 M HNO₃. Interferents such as Fe, Mn, Zn, Ni, Cu, As, Se, Cd, Pb, Au, Na, Mg, Ca, chloride, sulfate and phosphate were examined. The calibration plot for an 8.0 mL sampling volume was linear between 0.10 μg L⁻¹ and 10.0 μg L⁻¹ of Bi. The detection limit (3 s/m) was 25 ng L⁻¹. The enhancement factor for the characteristic concentration (C_o) was found to be 21 when compared with the regular system without trap, by using peak height values. The validation of the procedure was performed by the analysis of the certified water reference material and the result was found to be in good agreement with the certified values at the 95% confidence level.     

Maleated polypropylene OMMT nanocomposite: Annealing, structural changes, exfoliated and migration

Annealing of maleated polypropylene/organoclay nanocomposites is studied at a range of temperatures from 180 °C to 300 °C under a stream of nitrogen and nitrogen/air mixtures. The study comprises determinations of the migration of clay to the surface by the use of attenuated total reflectance Fourier transform infra red (ATR-FTIR) spectra. The extent of migration is shown to increase with the increase in the percent of maleic anhydride (MA) grafted onto the PP and with the percentage of air added to the nitrogen gas used for purging of the samples during annealing. The extent of migration increases with temperature up to 225 °C. At temperatures of 250-300 °C, the extent of migration decreases. Simultaneously, a change in the structure of the nanocomposites is observed by small-angle X-ray diffraction (XRD), showing a conversion of the nanostructure to the non-colloidal microcomposite. The study conforms to previous findings and indicates that the migrating moiety is composed of exfoliated clay particles. The effect of the decomposition of the grafted MA groups and the evolution of CO₂ on the rate of oxidation and migration are observed and discussed. The effect of the evolved CO₂ on the stability of the clay particles is pointed out. The role of migration in the elucidation of the structure of nanocomposites is discussed along with other mechanistic considerations.     

Thermal stability of microencapsulated epoxy resins with poly(urea-formaldehyde)

A series of microcapsules filled with epoxy resins with poly(urea-formaldehyde) (PUF) shell were synthesized by in situ polymerization, and they were heat-treated for 2 h at 100 °C, 120 °C, 140 °C, 160 °C, 180 °C and 200 °C. The effects of surface morphology, wall shell thickness and diameter on the thermal stability of microcapsules were investigated. The chemical structure and surface morphology of microcapsules were investigated using Fourier-transform infrared spectroscope (FTIR) and scanning electron microscope (SEM), respectively. The thermal properties of microcapsules were investigated by thermogravimetric analysis (TGA and DTA) and by differential scanning calorimetry (DSC). The thermal damage mechanisms of microcapsules at lower temperature (<251 °C) are the diffusion of the core material out of the wall shell or the breakage of the wall shell owing to the mismatch of the thermal expansion of core and shell materials of microcapsules. The thermal damage mechanisms of microcapsules at higher temperature (>251 °C) are the decomposition of shell material and core materials. Increasing the wall shell thickness and surface compactness can enhance significantly the weight loss temperatures (T_d) of microcapsules. The microcapsules with mean wall shell thickness of 30 ± 5 μm and smoother surface exhibit higher thermal stability and can maintain quite intact up to approximately 180 °C.     

Thermo-Raman spectroscopy in situ monitoring study of solid-state synthesis of NiO-Al2O3 nanoparticles and its characterization

Hyphenation of thermogravimetric analyzer (TGA) and thermo-Raman spectrophotometer for in situ monitoring of solid-state reaction in oxygen atmosphere forming NiO-Al₂O₃ catalyst nanoparticles is investigated. In situ thermo-Raman spectra in the range from 200 to 1400 cm⁻¹ were recorded at every degree interval from 25 to 800 °C. Thermo-Raman spectroscopic studies reveal that, although the onset of formation is around 600 °C, the bulk NiAl₂O₄ forms at temperatures above 800 °C. The X-ray diffraction (XRD) spectra and the scanning electron microscopy (SEM) images of the reaction mixtures were recorded at regular temperature intervals of 100 °C, in the temperature range from 400 to 1000 °C, which could provide information on structural and morphological evolution of NiO-Al₂O₃. Slow controlled heating of the sample enabled better control over morphology and particle size distribution (∼20-30 nm diameter). The observed results were supported by complementary characterizations using TGA, XRD, SEM, transmission electron microscopy, and energy dispersive X-ray analysis.