Infrared and visible image fusion based on visual saliency map and weighted least square optimization

The goal of infrared (IR) and visible image fusion is to produce a more informative image for human observation or some other computer vision tasks. In this paper, we propose a novel multi-scale fusion method based on visual saliency map (VSM) and weighted least square (WLS) optimization, aiming to overcome some common deficiencies of conventional methods. Firstly, we introduce a multi-scale decomposition (MSD) using the rolling guidance filter (RGF) and Gaussian filter to decompose input images into base and detail layers. Compared with conventional MSDs, this MSD can achieve the unique property of preserving the information of specific scales and reducing halos near edges. Secondly, we argue that the base layers obtained by most MSDs would contain a certain amount of residual low-frequency information, which is important for controlling the contrast and overall visual appearance of the fused image, and the conventional “averaging” fusion scheme is unable to achieve desired effects. To address this problem, an improved VSM-based technique is proposed to fuse the base layers. Lastly, a novel WLS optimization scheme is proposed to fuse the detail layers. This optimization aims to transfer more visual details and less irrelevant IR details or noise into the fused image. As a result, the fused image details would appear more naturally and be suitable for human visual perception. Experimental results demonstrate that our method can achieve a superior performance compared with other fusion methods in both subjective and objective assessments.     

Influence of surface topography and pore architecture of alkali-treated titanium on in vitro apatite deposition

Alkali-treated titanium surfaces have earlier shown to induce bone-like apatite deposition. In the present study, the effect of surface topography of two-dimensional and pore architecture of three-dimensional alkali-treated titanium substrates on the in vitro bioactivity was investigated. Titanium plates with a surface roughness of R_a = 0.13 μm, 0.56 μm, 0.83 μm, and 3.63 μm were prepared by Al₂O₃ grit-blasting. Simple tetragonal and face-centered Ti6Al4V scaffolds with spatial gaps of 450-1100 μm and 200-700 μm, respectively, were fabricated by a three-dimensional fiber deposition (3DFD) technique. After alkali treatment, the titanium plates with a surface roughness of R_a = 0.56 μm were completely covered with hydroxyapatite globules after 7 days in simulated body fluid (SBF), while the coverage of the samples with other surface roughness values remained incomplete. Similarly, face-centered Ti₆Al₄ scaffolds with spatial gaps of 200-700 μm exhibited a full surface coverage after 21 days in SBF, while simple tetragonal scaffolds with spatial gaps of 450-1100 μm were only covered for 45-65%. This indicates the importance of surface topography and pore architecture for in vitro bioactivity.     

Structural stability in Aurivillius phases based on ab initio thermodynamics

The Aurivillius oxide family possessess various attractive physical properties and have been commercially applicable in many areas. The regular large-period phases of this family are believed to offer better flexibilities of performance optimization than the commercial ones. However, the experimental synthesis of them is still challenging and the physical mechanisms of their structural stability are not yet clear. We propose a quasi-binary solid solution approach to study the structural stability of Aurivillius phases based on ab initio calculations. Three typical homologous series, CaBi₂Na_m-2Nb_mO_3m+3 and M_m-3Bi₄Ti_mO_3m+3 (M=Ca, Sr) with different in-plane lattice mismatches and chemical compositions, are studied. Our results prove that all the three systems are thermodynamically stable up to m=7 phases. By decomposing the formation process into two separate steps and analyzing the contributions to Gibbs formation energy from different factors, the configurational entropy as well as chemical bond optimization is suggested to play a crucial role in stabilizing the final phases, together with the elastic effect that was solely considered as the dominant factor before.     

Microstructure, optical and static recording properties of AgOx film, and near-field simulation of sub-wavelength aperture based on the AgOx marks’ formation

Structures, spectra and surface topographies of as-deposited and annealed AgO_x films have been investigated by an X-ray diffractometer, a spectrophotometer and an atomic force microscopy (AFM). X-ray diffraction and spectrum results show that the as-deposited AgO_x films with high oxygen ratios (x≥0.5) are in amorphous states and Ag crystalline particles will separate out after annealed. AFM results show that the film surface will become much rougher and film thickness will increase greatly after annealed due to the decomposition of AgO_x with release of oxygen. Static recording results show that two microstructures of the recording marks can be produced: one is the bubble mark at a low recording power and the other is the rupture bubble with an ablated aperture (hole) in the center at a high recording power. Based on the formation of rupture bubble marks, the near-field optical distribution of a focused Gaussian laser beam through a sub-wavelength aperture (200 nm in diameter) has been simulated using finite-difference-time-domain (FDTD) method. Results show that the spot size can be greatly squeezed with still highly transmitted intensity, which may lead to the super-resolution readout.     

Francisella tularensis detection using magnetic labels and a magnetic biosensor based on frequency mixing

A biosensor that uses resonant coils with a special frequency-mixing technique and magnetic beads as detectable labels has been established for the detection of Francisella tularensis, the causative agent for tularemia. The detection principle is based on a sandwich immunoassay using an anti-Ft antibody for immunofiltration immobilized to ABICAP^® polyethylene filters, and biotinylated with streptavidin-coated magnetic beads as labels. The linear detection range of this biosensor was found to be 10⁴–10⁶ cfu F. tularensis lipopolysaccharide (LPS) per ml. Tested sample matrices were physiological PBS buffer and rabbit serum.     

A novel algorithm based on visual saliency attention for localization and segmentation in rapidly-stained leukocyte images

In this paper, we propose a fast hierarchical framework of leukocyte localization and segmentation in rapidly-stained leukocyte images (RSLI) with complex backgrounds and varying illumination. The proposed framework contains two main steps. First, a nucleus saliency model based on average absolute difference is built, which locates each leukocyte precisely while effectively removes dyeing impurities and erythrocyte fragments. Secondly, two different schemes are presented for segmenting the nuclei and cytoplasm respectively. As for nuclei segmentation, to solve the overlap problem between leukocytes, we extract the nucleus lobes first and further group them. The lobes extraction is realized by the histogram-based contrast map and watershed segmentation, taking into account the saliency and similarity of nucleus color. Meanwhile, as for cytoplasm segmentation, to extract the blurry contour of the cytoplasm under instable illumination, we propose a cytoplasm enhancement based on tri-modal histogram specification, which specifically improves the contrast of cytoplasm while maintaining others. Then, the contour of cytoplasm is quickly obtained by extraction based on parameter-controlled adaptive attention window. Furthermore, the contour is corrected by concave points matching in order to solve the overlap between leukocytes and impurities. The experiments show the effectiveness of the proposed nucleus saliency model, which achieves average localization accuracy with F1-measure greater than 95%. In addition, the comparison of single leukocyte segmentation accuracy and running time has demonstrated that the proposed segmentation scheme outperforms the former approaches in RSLI.     

Systematic dependence of SFE*B(E2)↑ and ROTE*B(E2)↑on N_pN_n in the framework of shape fluctuation model

A systematic dependence of shape fluctuation energy product SFE * B(E2)↑ and rotational energy product ROTE * B(E2)↑ on the valence nucleon product Np Nn is carried out in the Z = 50-82,N = 82-126 major shell space.For the shape transitional nuclei,the product SFE*B(E2)↑ drops to zero and becomes negative,indicating direct dependence on N_pN_n.A relative rise,on the other hand,is observed in the product ROTE*B(E2) ↑plotted against N_pN_n for all the nuclei in Z = 50-82 and N = 82-126.In the N 104 region,large positive values of the product SFE * B(E2) ↑ are observed for the Pt nucleus,which indicates sphericity.A systematic study of the product SFE * B(E2)↑ and ROTE * B(E2) ↑ with atomic number Z is also discussed.The products SFE * B(E2) ↑and ROTE * B(E2) ↑ vary sharply with Z for the N = 88 isotones.We discuss here for the first time the correlation between SFE * B(E2) ↑ and ROTE * B(E2) ↑ with valence nucleon product N_pN_n.     

Organic radical molecular solids based on [(TCNQ)n] (n=1 or 2): Syntheses, crystal structures, magnetic properties and DFT analyses

Four molecular solids consisting of the 7,7,8,8-tetracyanoquinodimethane (TCNQ) radical and benzylpyridinium or benzylquinolinium derivatives with molar ratios of 1:1 (1-3) and 2:1 (4) have been prepared and characterized. In the crystals of 1 and 3, TCNQ⁻ monoanions and the corresponding cations form segregated stacks, which are regular in 1 but irregular in 3. Instead of segregated stacks, TCNQ⁻ monoanions in 2 form isolated π-dimers. In the crystals of 4, two crystallographic independent TCNQ species possess almost equal fractional negative charge (ca. −0.5). Two types of TCNQ species form a tetrad, these tetrads make a TCNQ stack with the pattern …BAAB…BAAB… along the crystallographic a-b direction. The magnetisms for 1-4 can be simply explained by the formation of singlet spin state. A broken symmetry approach in a density functional theory framework at the ub3lyp/6-31 g level was used to calculate the magnetic exchange constants in 1-4. The results qualitatively demonstrate the observed magnetic properties.     

电弧增材成形中熔积层表面形貌对电弧形态影响的仿真

电弧增材成形常采用单道多层或多道搭接的熔积方式,不同的熔积方式下对应的熔积层表面形貌不同,从而影响电弧的形态及其传热传质过程.本文建立了纯氩保护电弧增材成形的电弧磁流体动力学三维数值模型,以及不同表面形貌的熔积层模型,并在保持阳极与阴极之间距离和熔积电流不变的条件下,通过模拟计算获得增材成形特有的单道和多道搭接熔积条件下的不同表面形貌对应的电弧形态以及相应的温度场、流场、电流密度、电磁力、电弧压力分布.数值模拟结果表明:平面基板上起弧情况下电弧中心具有较高的温度、速度、电流密度以及压强;单道多层熔积情况下熔积层数对电弧的各个参量影响较小;多道搭接熔积情况下电弧呈非对称分布,电弧中心温度较前两者低,电流密度、电磁力和电弧压强的分布偏向熔积层一侧.     

Automatic segmentation of brain MRI in high-dimensional local and non-local feature space based on sparse representation

Automatic extraction of the varying regions of magnetic resonance images is required as a prior step in a diagnostic intelligent system. The sparsest representation and high-dimensional feature are provided based on learned dictionary. The classification is done by employing the technique that computes the reconstruction error locally and non-locally of each pixel. The acquired results from the real and simulated images are superior to the best MRI segmentation method with regard to the stability advantages. In addition, it is segmented exactly through a formula taken from the distance and sparse factors. Also, it is done automatically taking sparse factor in unsupervised clustering methods whose results have been improved.     

High-Q, tunable, photonic microwave single passband filter based on stimulated Brillouin scattering and fiber Bragg grating filtering

We experimentally demonstrate a single passband, photonic microwave bandpass filter scheme based on stimulated Brillouin scattering (SBS) in optical fiber. A single side band (SSB)-modulated probe and a single frequency, tunable pump beam that have been produced by the combination of conventional Mach-Zehnder modulators and fiber Bragg grating filters, are used for the generation of SBS phenomenon in a 1-km long highly nonlinear dispersion-shifted optical fiber. Using the proposed scheme a single microwave passband with a ∼26 MHz bandwidth is readily achieved over a radio frequency tuning range from 1.3 to 9.3 GHz. The maximum Q-factor is measured to be ∼360.     

White organic light-emitting diodes based on combined electromer and monomer emission in doubly-doped polymers

We report on white organic light-emitting diodes (WOLEDs) based on polyvinylcarbazole (PVK) doped with 1,1-bis((di-4-tolylamino)phenyl)cyclohexane (TAPC) and perylene, and investigate the luminescence mechanism of the devices. The chromaticity of light emission can be tuned by adjusting the concentration of the dopants. White light with the Commission Internationale de L'Eclairage (CIE) coordinates of (0.33, 0.34) is achieved by mixing the yellow electromer emission of TAPC and the blue monomer emission of perylene from the device ITO/PVK: TAPC: perylene (100:9:1 in wt.) (100 nm)/tris-(8-hydroxyquinoline aluminum (Alq₃) (10 nm)/Al. The device exhibits a maximal luminance of 3727 cd/m² and a current efficiency of 2 cd/A.     

White organic light-emitting diodes based on a combined electromer and monomer emission in doubly-doped polymers

We report on white organic light-emitting diodes(WOLEDs) based on polyvinylcarbazole(PVK) doped with 1,1-bis((di-4-tolylamino)phenyl)cyclohexane(TAPC) and perylene,and investigate the luminescence mechanism of the devices.The chromaticity of light emission can be tuned by adjusting the concentration of the dopants.White light with the Commission Internationale de L’Eclairage(CIE) coordinates of(0.33,0.34) is achieved by mixing the yellow electromer emission of TAPC and the blue monomer emission of perylene from the device ITO/PVK:TAPC:perylene(100:9:1 in wt.)(100 nm)/tris-(8-hydroxyquinoline aluminum(Alq 3)(10 nm)/Al.The device exhibits a maximal luminance of 3727 cd/m2 and a current efficiency of 2cd/A.     

Improved all-optical OR logic gate based on combined Brillouin gain and loss in an optical fiber

Improved all-optical OR gates are proposed, using a novel fiber nonlinearity-based technique, based on the principles of combined Brillouin gain and loss in a polarization-maintaining fiber （PMF）. Switching contrasts are simulated to be between 82.4%-83.6%, for two respective configurations, and switching time is comparable to the phonon relaxation time in stimulated Brillouin scattering （SBS）.     

Characterization of signs change of nonlinear refraction in ZnSe based on a modified double 4f imaging system with a phase object

Signs change of nonlinear refractive index in ZnSe is observed by employing a modified double 4f imaging system at the wavelength of 800 nm using picosecond pulses with different pulse energies. This process results from the competition of the bound electronic nonlinear refraction and the free carrier refraction. At low intensity, positive nonlinear refraction is obtained, which is attributed to bound electrons. As the increase of laser beam intensity, the nonlinear refractive index become small, and changes to negative. This is ascribed to free carriers generated by two-photon absorption. Additionally, the nonlinear refractive index of bound electron and the refractive index change of free carrier are determined unambiguously by a simple method.     

Hydrogen passivation effect on the yellow-green emission band and bound exciton in n - ZnO

Photoluminescence (PL) measurements performed on as-grown, hydrogenated, and annealed n-type ZnO bulk samples investigated the origins of their yellow (2.10 eV) and green (2.43 eV) emission bands. After hydrogenation, the defect-related peak at 2.10 eV was no longer present in the room temperature PL spectrum, the peak intensity at 2.43 eV was unchanged, and the intensity of the emission peak at 3.27 eV increased significantly. These results indicate that yellow band emission is due to oxygen vacancies, as the emission peak at 2.10 eV disappears when hydrogen atoms passivate these vacancies. The emission peak at 2.43 eV originates from complexes between oxygen vacancies and other crystal defects. We discuss the shallow donor impurities arising due to these hydrogen atoms in the ZnO bulk sample.     

Reactivity and XAFS study on (1−x)CeO2-xNiO (x=0.025-0.3) system in the two-step water-splitting reaction for solar H2 production

The redox reaction of Ce⁴⁺-Ce³⁺ promoted by the catalytic function of nickel ions in a (1−x)CeO₂-xNiO solid solution was investigated for solar H₂ production by the two-step water-splitting reaction. By irradiation using an infrared imaging lamp as a solar simulator, the O₂-releasing reaction with (1−x)CeO₂-xNiO solid solution proceeded at 1673-1873 K, and its reduced form was produced. The amounts of H₂ gas evolved by the reduced form were 1.2-2.5 cm³/g and the evolved gases amounts ratio of H₂/O₂ was nearly 2, which is equal to the stoichiometric value of the water-splitting reaction (H₂O=H₂+1/2O₂). The maximum amounts of evolved H₂ and O₂ gases were obtained at the Ce:Ni mole ratio of 0.95:0.05 (x=0.05) in the (1−x)CeO₂-xNiO system. The X-ray absorption fine structure (XAFS) measurement showed that the O₂-releasing and H₂-generation reactions with (1−x)CeO₂-xNiO solid solution were repeatable with the redox system of Ce⁴⁺-Ce³⁺, which was enhanced by the catalytic function of Ni²⁺-Ni⁰.