丝素蛋白修饰改性的聚羟基脂肪酸酯支架上人体平滑肌细胞的生长

聚三羟基丁酸脂和聚三羟基己酸脂的共聚物(PHBHH_x)是一种具有良好强度和韧性的生物可降解高分子材料, 可作为组织工程心脏瓣膜支架的选择材料之一. 但其生物相容性尚不甚理想. 为此, 本工作利用丝素蛋白修饰改性高分子多孔支架, 以提高支架的生物相容性. 并将人体平滑肌细胞接种在该复合支架上进行体外培养, 以证实改性效果. 其中, 用3-(4,5-二甲基噻唑-2)-2,5-二苯基四氮唑溴盐(MTT)方法测试细胞生长, 评估复合支架的细胞相容性. 并用扫描电子显微镜观察细胞在支架上的生长形态. 结果显示, 丝素蛋白修饰改性后的复合支架更有利于细胞的粘附与生长, 平滑肌细胞在支架上表现出良好的生长形态. 这表明, 丝素能够改善多孔支架的生物相容性, 使PHBHH_x/丝素蛋白复合物能更适宜作为组织工程心脏瓣膜的支架材料. 结果对于进一步研究细胞外间质在复合支架上的生长以及体外培养的组织重建有重要的参考意义.     

Fabrication,Crosslinking and in vitro Biocompatibility of a Novel Degradable Nano-structure Urethral Tubular Scaffold

A degradable poly(lactic-co-glycolic acid, LA:GA=80:20)(PLGA) urethral tubular scaffold was fabricated by electrospinning. In order to enhance the mechanical properties, the scaffold was crosslinked with glutaraldehyde. The structure and properties of the crosslinked scaffolds were investigated by the mechanical property testing, scanning electron microscopy(SEM), degradability test in vitro and 3-(4,5)-dimethylthiahiazo(-z-yl)-3,5-diphenytetrazo- liumromide(MTT). The results show that the scaffold has the nano-structure. The pore size and the porosity are suitable for cell seeding, growth and extracellular matrix production. Although influenced by the crosslinking slightly, the pore size and the porosity could still support cell proliferation and tissuse formation. The mechanical properties are remarkably increased by the crosslinking of glutaraldehyde, and it could meet the demands of a urethral stent. The scaffold could completely collapse within 70 d. The results of the biocompatibility test show that the PLGA scaffold had no cytotoxicity.     

与胶原特异性结合的BMP2模拟肽/PLGA 3D打印复合支架的制备及成骨诱导活性

将胶原绑定结构域(CBD)多肽序列与骨形态发生蛋白2模拟肽(BMP2-MP)序列连接制备具有胶原绑定能力的CBD-BMP2-MP, 再将CBD-BMP2-MP与聚丙交酯-乙交酯/胶原(PLGA/COL)3D打印支架相结合, 以支架表面的胶原成分为媒介, 将CBD-BMP2-MP更有效地固定于骨修复材料上, 达到对其进行改性的目的. 利用扫描电子显微镜(SEM)、 电子万能试验机和接触角测量仪对复合支架表面形貌、 力学强度和亲水性等材料学性能进行评价. 用荧光成像法评测 CBD-BMP2-MP及BMP2-MP与支架材料的结合能力. 在各组支架材料表面接种MC3T3-E1细胞进行体外培养, 采用CCK-8、 鬼笔环肽荧光染色、 茜素红染色及qPCR综合评价细胞在材料表面的黏附、 增殖和成骨分化等细胞行为, 研究CBD-BMP2-MP修饰的3D多孔PLGA/COL复合支架的生物学性能. 研究结果表明, 利用3D打印技术制备的多孔支架具有形貌可控的孔隙结构, 为细胞生长创造更有利的细胞微环境, 支架表面胶原成分的加入提高了支架材料的亲水性, 同时对支架材料本身的力学性能无任何影响, 提高了复合支架本身的生物相容性. 与普通BMP2-MP相比, CBD-BMP2-MP具有更好的胶原绑定能力, 与复合支架的结合更稳定, 提高了PLGA/COL复合支架对BMP2-MP的负载能力. 支架表面负载CBD-BMP2-MP后具有极强的促细胞成骨分化能力. MC3T3-E1细胞表现出更高的钙沉积能力, 并且成骨分化相关基因Runx2, ALP, COL-I及OPN等水平也有了明显提升. 表明CBD-BMP2-MP多孔复合支架具有良好的生物相容性和成骨诱导活性, 在骨组织修复领域具有良好的应用前景.     

3D inverted opal hydrogel scaffolds with oxygen sensing capability

The measurement of local oxygen level in 3D cell culture is desired but remains as a challenge problem. We developed a 3D cell scaffold with luminescence-based oxygen sensing capability that opens the possibility of 3D mapping of oxygen level during cell growth. Hydrogel inverted opal scaffold was prepared by photo-polymerization of poly(2-hydroxyethyl methacrylate (pHEMA) and poly(methacryloyloxy)ethyl-trimethylammonium chloride (pMEATAC) monomer using close-packed bead assembly as template. Tris(4,7-diphenyl-1,10-phenanthroline)ruthenium chloride (Ru(dpp)(3)), was coated on the pHEMA-pMEATAC 3D scaffolds by layer-by-layer (LBL) assembly. pHEMA-pMEATAC copolymer was coated on top of the Ru(dpp)(3) layer as a protection layer. The fluorescence emission of Ru(dpp)(3) can be dynamically quenched by oxygen. By measuring the emission intensity of the scaffold, the local oxygen level can be monitored. The hydrogel scaffolds are transparent, and thus 3D fluorescence intensity can be mapped by confocal microscopy. Human bone marrow stromal cells HS-5 were successfully cultured on the oxygen sensing scaffold, and the observed Ru(dpp)(3) emission intensity from the scaffold was stronger in cell rich area, which indicates a lower oxygen level due to the consumption of the cells.     

In-Vitro Biocompatibility Evaluation of Collagen-Hyaluronic Acid/Bioactive Glass Nanocomposite Scaffold

A nano-structured scaffold was designed for bone repair using collagen, hyaluronic acid (HYA) and nano-bioactive glass (NBaG) as its main components. The collagen-HYA/NBaG scaffold was prepared by using a freeze-drying technique and characterized by scanning electron microscopy (SEM). Osteoblastls were seeded on these scaffolds and their proliferation rate, alkaline phosphatase (ALP) activity and ability to form mineralized bone nodules were compared with those osteoblasts grown on cell culture plastic surfaces. The cross-section morphology shows that the collagen-HYA/NBaG scaffold possessed a three-dimensional (3D) interconnected homogenous porous structure. The results obtained from biological assessment show that this scaffold did not negatively affect osteoblasts proliferation rate and improves osteoblasts function as shown by increasing the ALP activity and calcium deposition and formation of mineralized bone nodules. Therefore, the composite scaffolds could provide a favorable environment for initial cell adhesion, maintained cell viability and cell proliferation, and had good in-vitro biocompatibility.     

Optimization of fibrin gelation for enhanced cell seeding and proliferation in regenerative medicine applications

In order to improve the cell seeding efficiency and cell compatibility inside porous tissue scaffolds, a method of fibrin gel‐mediated cell encapsulation inside the scaffold was optimized. Disc‐type poly(d ,l ‐glycolic‐co‐lactic acid) (PLGA) scaffolds without a dense surface skin layer were fabricated using an established solvent casting and particulate leaching method as a model porous scaffold, which showed high porosity ranging from 90 ± 2% to 96 ± 2%. The thrombin and fibrinogen concentration as precursors of fibrin gel was varied to control the gelation kinetics as measured by rheology analysis, and optimized conditions were developed for a uniform fibrin gel formation with the target cells inside the porous PLGA scaffold. The fibroblast cell seeding accompanied by a uniform fibrin gel formation at an optimized gelation condition inside the PLGA scaffold resulted in an increase in cell seeding efficiency, a better cell proliferation, and an increase in final cell density inside the scaffold. Scanning electron microscopy images revealed that cells were better spread and grown by fibrin gel encapsulation inside scaffold compared with the case of bare PLGA scaffold. Copyright © 2016 John Wiley & Sons, Ltd.     

Modifying the Pores of an Inverse Opal Scaffold With Chitosan Microstructures for Truly Three‐Dimensional Cell Culture

Inverse opal scaffolds have recently emerged as a novel class of scaffolds with uniform and controllable pore sizes for tissue engineering to provide better nutrient transport, a uniform cell distribution, and an adjustable microenvironment for cell differentiation. However, when the pore size of the scaffold is much larger than the dimension of a cell, the cell actually encounters a local 2D environment and the void space associated with the pore can not be efficiently utilized. Here, we demonstrate that a truly 3D microenvironment can be created inside a pore by further functionalizing the as‐prepared inverse opal scaffold with a second polymer by freeze‐drying. The resultant inverse opal scaffold with hierarchically structured pores can enhance both cell proliferation and tissue infiltration.     

Enhancement of biocompatibility on aligned electrospun poly(3‐hydroxybutyrate) scaffold immobilized with laminin towards murine neuroblastoma Neuro2a cell line and rat brain‐derived neural stem cells (mNSCs)

Electrospinning has been extensively used to construct tissue‐engineered scaffolds because of its ability to provide the fibrous scaffold with structurally analogous to the naturally occurring protein in the extracellular matrix of native tissues. In addition, the modification of scaffolds with bioactive molecules is beneficial as this can create an environment that consists of biochemical cues to further promote cell adhesion, proliferation, and differentiation. In the present contribution, we prepared and investigated the potential used of aligned electrospun poly(3‐hydroxybutyrate) (PHB) scaffold immobilized with bioactive molecule to serve as nervous scaffold. Laminin was successfully immobilized on the surface using covalent binding between functional groups of modified scaffolds and protein. The ability to use for neural regeneration was evaluated in vitro towards murine neuroblastoma Neuro2a cell line and mouse brain‐derived neural stem cells. The surface modification with laminin immobilized on the PHB fibrous scaffolds supported the attachment and promoted the proliferation of Neuro2a very wells. Despite the good attachment and proliferation of Neuro2a and mouse brain‐derived neural stem cells were not able to proliferate on the neat PHB, hydrolyzed PHB and laminin immobilized on hydrolyzed PHB fibrous scaffold.     

Cell microarray chip system for accurate,rapid diagnosis and target treatment of breast cancer cells SK-BR-3

Biometrics probe is a molecule that specifically interacts with a specific target molecule and can be detected by a specific method. Three-dimensional (3D) embedded cell scaffold in the cell array chip can affect culture cancer cells in a 3D environment with continuous medium supplementary and help controlling the diffusion of small molecules drugs. Based on modification of DNA segment, this type of cell micro-array chip is a new biochip technology with convenient focusing and high throughput screening.     

Incorporation of nanohydroxyapatite and vitamin D3 into electrospun PCL/Gelatin scaffolds: The influence on the physical and chemical properties and cell behavior for bone tissue engineering

Scaffold, an essential element of tissue engineering, should provide proper physical and chemical properties and evolve suitable cell behavior for tissue regeneration. Polycaprolactone/Gelatin (PCL/Gel)‐based nanocomposite scaffolds containing hydroxyapatite nanoparticles (nHA) and vitamin D3 (Vit D3) were fabricated using the electrospinning method. Structural and mechanical properties of the scaffold were determined by scanning electron microscopy (SEM) and tensile measurement. In this study, smooth and bead‐free morphology with a uniform fiber diameter and optimal porosity level with appropriate pore size was observed for PCL/Gel/nHA nanocomposite scaffold. The results indicated that adding nHA to PCL/Gel caused an increase of the mechanical properties of scaffold. In addition, chemical interactions between PCL, gelatin, and nHA molecules were shown with XRD and FT‐IR in the composite scaffolds. MG‐63 cell line has been cultured on the fabricated composite scaffolds; the results of viability and adhesion of cells on the scaffolds have been confirmed using MTT and SEM analysis methods. Here in this study, the culture of the osteoblast cells on the scaffolds showed that the addition of Vit D3 to PCL/Gel/nHA scaffold caused further attachment and proliferation of the cells. Moreover, DAPI staining results showed that the presence and viability of the cells were greater in PCL/Gel/nHA/Vit D3 scaffold than in PCL/Gel/nHA and PCL/Gel scaffolds. The results also approved increasing cell proliferation and alkaline phosphatase (ALP) activity for MG‐63 cells cultured on PCL/Gel/nHA/Vit D3 scaffold. The results indicated superior properties of hydroxyapatite nanoparticles and vitamin D3 incorporated in PCL/Gel scaffold for use in bone tissue engineering.     

Synthesis and reactions of 7-fluoro-4-methyl-6-nitro-2-oxo-2H-1-benzopyran-3-carboxylic acid: a novel scaffold for combinatorial synthesis of coumarins

7-Fluoro-4-methyl-6-nitro-2-oxo-2H-1-benzopyran-3-carboxylic acid has been prepared as a novel scaffold for combinatorial synthesis of coumarins. The scaffold has three points of diversity. The optimal conditions for its reactions with different nucleophiles in solid phase were obtained. Sixteen coumarin derivatives with different structures were designed and synthesized in solid phase to demonstrate its application as a scaffold for combinatorial synthesis of coumarins. Thirteen of these derivatives were obtained in high yields. Many of these model compounds fluoresce. Combinatorial libraries constructed with this novel scaffold may have interesting biological or physical properties.     

Lipidated cyclopropenes via a stable 3-N spirocyclopropene scaffold

Lipidated cyclopropenes serve as useful bioorthogonal reagents for imaging cell membranes due to the cyclopropene’s small size and ability to ligate with pro-fluorescent tetrazines. Previously, the lipidation of cyclopropenes required modification at the C3 position because methods to append lipids at C1/C2 were not available. Herein, we describe C1/C2 lipidation with the biologically active lipid ceramide and a common phospholipid using a cyclopropene scaffold whose reactivity with 1,2,4,5-tetrazines has been caged.     

Assembling OX40 aptamers on a molecular scaffold to create a receptor-activating aptamer

We show that a molecular scaffold can be utilized to convert a receptor binding aptamer into a receptor agonist. Many receptors (including tumor necrosis receptor family members) are activated when they are multimerized on the cell surface. Molecular scaffolds have been utilized to assemble multiple receptor binding peptide ligands to generate activators of such receptors. We demonstrate that an RNA aptamer that recognizes OX40, a member of the tumor necrosis factor receptor superfamily, can be converted into a receptor-activating aptamer by assembling two copies on an olignucleotide-based scaffold. The OX40 receptor-activating aptamer is able to induce nuclear localization of nuclear factor-kappaB, cytokine production, and cell proliferation, as well as enhance the potency of dendritic cell-based tumor vaccines when systemically delivered to mice.     

Shape and motility of a model cell: a computational study

We have investigated the shape, size, and motility of a minimal model of an adherent biological cell using the Monte Carlo method. The cell is modeled as a two dimensional ring polymer on the square lattice enclosing continuously polymerizing and depolymerizing actin networks. Our lattice model is an approximate representation of a real cell at a resolution of one actin molecule, 5 nm. The polymerization kinetics for the actin network are controlled by appropriate reaction probabilities which correspond to the correct experimental reaction rates. Using the simulation data we establish various scaling laws relating the size of the model cell to the concentration of polymerized and unpolymerized actin molecules and the length of the enclosing membrane. The computed drift velocities, which characterize the motility of the cell, exhibit a maximum at a certain fraction of polymerized actin which agrees with physiological fractions observed in experiments. The appearance of the maximum is related to the competition between the polymerization-induced protrusion of the membrane and the concomitant suppression of membrane fluctuations.     

Cell(MC3T3‐E1)‐Printed Poly(ϵ‐caprolactone)/Alginate Hybrid Scaffolds for Tissue Regeneration

A new cell‐printed scaffold consisting of poly(ϵ‐caprolactone) (PCL) and cell‐embedded alginate struts is designed. The PCL and alginate struts are stacked in an interdigitated pattern in successive layers to acquire a three‐dimensional (3D) shape. The hybrid scaffold exhibits a two‐phase structure consisting of cell (MC3T3‐E1)‐laden alginate struts able to support biological activity and PCL struts able to provide controllable mechanical support of the cell‐laden alginate struts. The hybrid scaffolds exhibit an impressive increase in tensile modulus and maximum strength compared to pure alginate scaffolds. Laden cells are homogeneously distributed throughout the alginate struts and the entire scaffold, resulting in cell viability of approximately 84%.     

由D型氨基酸设计自组装短肽D-EAK16构建新型三维纳米纤维支架材料

采用D型氨基酸设计自组装短肽D-EAK16, 运用圆二色仪及原子力显微镜等仪器和细胞三维培养, 发现短肽D-EAK16在30 ℃时具有稳定的二级结构β-sheet, 在一定浓度下D-EAK16可形成由纳米纤维构成的透明水凝胶, 含水量高达99％, 可在细胞培养基(如PBS, DMEM)中形成支架. 细胞三维培养显示, 该水凝胶对细胞HO-8910和SPC-A-1的生长未见毒性. 比较D型氨基酸纳米支架和L型氨基酸纳米支架, 细胞的毒性未发现显著性差异. 采用D型氨基酸构建的自组装短肽, 可提供一个三维基质培养系统, 期望能广泛应用于生物医学工程等领域.     

Design and synthesis of a novel class of CK2 inhibitors: application of copper- and gold-catalysed cascade reactions for fused nitrogen heterocycles

Two classes of fused nitrogen heterocycles were designed as CK2 inhibitor candidates on the basis of previous structure-activity relationship (SAR) studies. Various dipyrrolo[3,2-b:2',3'-e]pyridine and benzo[g]indazole derivatives were prepared using transition-metal-catalysed cascade and/or multicomponent reactions. Biological evaluation of these candidates revealed that benzo[g]indazole is a promising scaffold for potent CK2 inhibitors. The inhibitory activities on cell proliferation of these potent CK2 inhibitors are also presented.     

Enhancing endothelial differentiation of human mesenchymal stem cells by culture on a nanofibrous polycaprolactone/(poly-glycerol sebacate)/gelatin scaffold

Cardiovascular diseases have always been one of the main causes of death worldwide and eventually one of the major medical concerns. Tissue engineering is promising strategies of treating cardiovascular, which can be an effective approach with the design of appropriate scaffold. In this study, to develop engineering basement membrane for endothelial differentiation with good cell attachment, we produced polycaprolactone (PCL)/poly (glycerol sebacate) (PGS)/gelatin nanofibrous scaffold via electrospinning. Attenuated total reflectance-Fourier transform infrared and the proton nuclear magnetic resonance results confirmed the chemical structure of synthesized PGS. Scanning electron microscope images of the electrospun scaffold revealed that the nanofibers are smooth, continues and uniform. Moreover, due to the presence of hydrophilic functional groups in the scaffold, the contact angle is in the appropriate range for cell adhesion especially endothelial cells. The elastic modulus and ultimate tensile stress of electrospun scaffold were calculated 1.32 ± 0.27 MPa and 1.23 ± 0.18 MPa respectively. Quantitative polymerase chain reaction was performed for evaluation of endothelial differentiation of mesenchymal stem cells cultured on standard plate and fibrous scaffold under chemical stimulation with growth factor. Specific endothelial gene expression results postulated that our modified scaffold could support and significantly promote endothelial differentiation of MSCs.     

基于聚丙烯酸交联组装单层SiO_2纳米粒粗糙表面及其细胞捕获

以玻片为载体(Subs),聚丙烯酸(PAA)为交联剂和柔性体,SiO_2纳米粒为刚性体,人B淋巴细胞瘤Ramos细胞为目标细胞,TD05适体为细胞捕获配体(Apt),在载体上交联组装了结构为Subs-PAA1-SiO_2-PAA2-Apt的细胞捕获支架。该支架既有小尺度的刚性结构,即SiO_2纳米粒,又有柔性结构,即聚丙烯酸PAA1和PAA2。前者增加了载体的粗糙度,而后者不仅能够固载多重捕获配体,也能够有效降低宏观载体对细胞捕获的空间位阻。结果表明,支架具有良好的纳米粒结构,未发现纳米粒的融合甚至消失;支架的特异性捕获是非特异性吸附的16倍,被捕获细胞表现出较高的纯度;同时,支架具有较高的捕获效率,捕获细胞数是通常的单层刚性纳米粒支架的8.3倍。由此表明,该文构建的结构新颖的纳米粒柔性支架实现了目标细胞的高效率、高纯度捕获,将为肿瘤细胞的分析检测提供可靠的样本。     

Studies on Surface Properties and Cell Adhesion Properties of BSA Modified DBM Scaffold

As a scaffold material for bone tissue engineering, demineralized bone matrix(DBM) has such a limited ability to load cells and growth factors that the surface of the DBM scaffold was modified with bovine serum albumin(BSA) with different concentrations to improve the protein stmcture and physicochemical properties of the scaffold surface so as to enhance the adhesion of the cells. And the appropriate BSA concentration was explored. Compared with DBM, the scaffold with BSA coating had a smaller pore size and a lower porosity, also, the degradation rate was accelerated and the hydrophilic property was improved. Cells adhesion was observed inside the DBM seaffold before and after it had been modified, and the BSA modified scaffold had a good cell compatibility. Wlien the concentration of BSA was 20 mg/mL, the adhesion ability of the cells to modified scaffold was significantly increased, and the cell proliferation was facilitated.