Hydrolyzable nonionic surfactants: stability and physicochemical properties of surfactants containing carbonate, ester, and amide bonds

A linear and a branched nonionic cleavable surfactants containing a carbonate bond have been prepared from tetra(ethylene glycol) and an alkylchloroformate. The stability of these carbonate surfactants was determined by investigating their hydrolysis and biodegradability characteristics. The hydrolysis was catalyzed by alkali or enzymes (esterase from porcine liver and lipases from Mucor miehei and Candida antarctica B) and was monitored using 1H NMR. It was found that the stability toward alkali was higher for a carbonate surfactant than for a corresponding surfactant with an ester as weak bond. Biodegradation tests resulted in more than 60% degradation after 28 days for both carbonate surfactants. Physicochemical properties, such as critical micelle concentration (CMC), cloud point, area per molecule, and surface tension at the CMC, were determined and compared to those obtained from similar surfactants containing ester, amide, or ether bonds. It was found that the carbonate linkage is hydrophobic and that the oxycarbonyl part of the carbonate group is equivalent, in a formal sense, to an extra methylene group in the alkyl chain of the surfactant.     

Mechanism of transesterification and cyclization of epoxy–polycarbonate blends catalyzed by quarternary ammonium salt

The reaction of oxirane with carbonate using quarternary ammonium salts as catalyst has been studied. Curing is caused by the transesterification reaction of the oxirane cycle with the carbonate group that proceeds by an “insertion” mechanism in the stoichiometric system. The ratio of the reactants is two oxirane groups to one carbonate group. In the nonstoichiometric system, the epoxide content is more than the stoichiometric quantity required. A cyclization reaction is followed by the transesterification reaction. To identify the finished products, a model reaction was proposed using diphenyl carbonate and phenyl glycidyl ether which results in the formation of 4-phenoxymethyl-1,3-dioxolane-2-one (PMD). The mechanism of forming the cyclic structure is assumed to proceed through the chain scission of the network in which the molecular chain crosslinked with carbonate group by a transesterification reaction. © 1996 John Wiley & Sons, Inc.     

EPR characterization of carbonate ion effect on TCE and PCE decomposition by gamma-rays

Carbonate ions significantly inhibit the decomposition of TCE (trichloroethylene) and PCE (perchloroethylene) by gamma-rays. The inhibition effect is larger in the case of TCE than PCE due to a greater dependence of TCE decomposition on hydroxyl radicals. The inhibition effect of carbonate ions was characterized by an EPR/spin-trapping technique. The intensity of DMPO-OH adduct signal decreased as the carbonate ion concentration increased and the percent of signal reduction was linearly proportional to the logarithm of carbonate ion concentration. This directly proves that the carbonate ions inhibit the decomposition of TCE and PCE by scavenging hydroxyl radicals.     

Effect of calcium and carbonate concentrations on cationic membrane fouling during electrodialysis

Fouling, which is the accumulation of undesired solid materials at the phase interfaces of permselective membranes, is one of the major problems in electrodialysis. The aim of the present work was to investigate the effect on the fouling of cation-exchange membranes of the composition in calcium and carbonate of a model solution to be treated by electrodialysis. No fouling was observed at 400 and 800 mg/L of CaCl(2) in the absence of carbonate, while at only 400 mg/L CaCl(2) with carbonate, a deposit was observed. This difference could be explained by the buffering capacity of the carbonate, which affects the treatment duration with and without sodium carbonate. Since the duration was longer with carbonate, more calcium ions were able to migrate across the CMX-S membrane, which explained the higher deposit on its surface. Furthermore, whether there was carbonate in the solution treated by electrodialysis or not, the deposit on the surface of the cationic membrane was calcium hydroxide. However, this fouling formed during conventional ED was easily cleaned by an acid procedure.     

An infrared study of co-adsorption of N2O and CO on ZnO

The absorption of N(2)O and CO at room temperature on finely divided ZnO surfaces gives reversible absorption bands from surface N(2)O species in the 2237-2245, 2265-2285 and 1245-1255 cm(-1) regions. The growth of the first band is at the expense of the second while its intensity and position depends on the extent of the surface carbonate, formed by the oxidation of CO by N(2)O. The order of introduction of CO and N(2)O, and whether the ZnO surface is oxidised or reduced, gave significantly different results in terms of carbonate formation. The strongest carbonate formation and implied decomposition of N(2)O, occurs at room temperature when CO is added to preadsorbed N(2)O on an oxidised ZnO surface. A single bidentate carbonate is formed under these conditions but on heating in the gas mixture to 200 degrees C an additional, possibly monodentate, carbonate occurs together with a surface formate species.     

X-ray absorption and diffraction analysis for determination of the amount of calcium carbonate and porosity in paper sheets

Papers are mostly made with lignocellulose and additives among which calcium carbonate has a primarily importance. Calcium carbonate as a filler provides specific properties to the paper like brightness, porosity, etc. Because of low retention, calcium carbonate remains in large quantities in the waste water when at the final stage, the paper is couched and pressed. It is therefore interesting to develop some methods to analyze in a nondestructive way the content of calcium carbonate that remains in the paper. We report in this article an X-ray study of paper sheets with the aim to determine not only the content of calcium carbonate in a nondestructive way but also the porosity of the paper sheets. The analysis is carried out in a quantitative way by refining the wide angle X-ray diffraction patterns using the Rietveld method and by modeling the absorption of the direct beam through paper sheets.     

Cesium Carbonate in Weakly Hydrated Solid/Liquid Heterogeneous Medium: A New Reagent for Anionic Activation Synthesis

Transformation of acidic hydrogen carrying aldehydes- in corresponding ethylenic esters or ethers is carried out in the presence of cesium carbonate. Cesium carbonate proves to be an efficient reagent for any transformation by anionic activation of poly-functional molecules.     

Uptake of Pu(IV) on Bio-Rex 63 from nitric acid medium: A kinetic study

Back-extraction of tri- and tetravalent actinides from diisodecylphosphoric acid (DIDPA) is studied using hydrazine carbonate as back-extractant. In experiments using 0.5M DIDPA–0.1M TBP n-dodecane solution, Am(III), Eu(III), Pu(IV) and Np(IV) are back-extracted, and the distribution ratios are decreased with an increase of hydrazine carbonate concentration. The back-extraction equilibria are confirmed by slope analysis in consideration of neutralization between DIDPA and hydrazine carbonate, which occurs quantitatively during back-extraction. In particular, oxidation of Np(IV) to Np(V) during back-extraction is observed by measuring absorption spectra. The hydrazinium ion acts as an oxidation reagent in the back-extraction of Np(IV). Separation factors of those metals are compared with the results of HDEHP. Hydrazine carbonate back-extracts Np(IV) more selectively from DIDPA than from HDEHP.     

Determination of boron by (p, a) reaction

Back-extraction of tri- and tetravalent actinides from diisodecylphosphoric acid (DIDPA) is studied using hydrazine carbonate as back-extractant. In experiments using 0.5M DIDPA–0.1M TBP n-dodecane solution, Am(III), Eu(III), Pu(IV) and Np(IV) are back-extracted, and the distribution ratios are decreased with an increase of hydrazine carbonate concentration. The back-extraction equilibria are confirmed by slope analysis in consideration of neutralization between DIDPA and hydrazine carbonate, which occurs quantitatively during back-extraction. In particular, oxidation of Np(IV) to Np(V) during back-extraction is observed by measuring absorption spectra. The hydrazinium ion acts as an oxidation reagent in the back-extraction of Np(IV). Separation factors of those metals are compared with the results of HDEHP. Hydrazine carbonate back-extracts Np(IV) more selectively from DIDPA than from HDEHP.     

Dynamics and Mechanisms of Changes in the Properties of Disperse Structures in Water Body Floors

Chemical, colloidal, and geochemical transformations in an open dissipative ecosystem atmosphere–water basin–water body floor composed of clay carbonate metamorphosed sedimentary rocks were considered using both model, natural, and technogenic objects. Based on the model of interactions of the acidic components with mineralized water and clay carbonate water body floors, it was shown that the process of carbonate karst at the reservoir bottom can be one of the reasons for the plastic flow in benthic part of ground dam. The role of oscillation processes in carbonate dissolution at a nanolevel and in their metamorphic and technogenic transformations was clarified. It was established that, at low external stresses, plasticized clay carbonate structures decrease their viscosity by several times and are deformed in an oscillating regime which is especially pronounced at the initial period of stress loading.     

pH-dependent release from ethylcellulose microparticles containing alginate and calcium carbonate

Ethylcellulose microparticles containing alginate and calcium carbonate nanoparticles were prepared by spray drying water-in-oil emulsion. Alginate solution (3%) in distilled water was used as an aqueous phase, ethylcellulose solution (5%) in dichloromethane as an oil phase, and sorbitan sesquioleate as an emulsifier. The nanoparticles of calcium carbonate were dispersed into the emulsion. By spray-drying the emulsion, ethylcellulose microparticles containing alginate and calcium carbonate were obtained. When the ratios of alginate to calcium carbonate were 4:1 and 2:1, the pH dependency of the release was marked and the degree of release was suppressed in acidic conditions. When the ratio increased to 1:2, the degree of release increased while the pH-dependent release profiles were maintained. Cavities created by the dissolution of calcium carbonate could account for the increased release.     

Dimers of cyclic carbonates: chirality recognition in battery solvents and energy storage

Dimers of ethylene carbonate and propylene carbonate are created in supersonic jet expansions and characterized by FTIR spectroscopy. Fermi resonances are switched on and off by dimerization. There is a unique centrosymmetric dimer of ethylene carbonate in a pronounced case of complementary chirality synchronization, contributing to its energy storage capacity at melting. Two chiral propylene carbonate molecules combine in more intricate ways. If they have the same handedness, one of them is forced into an axial conformation and the binding partner stays in the more stable equatorial structure. If they have opposite handedness, centrosymmetric dimers of either axial or equatorial conformations are formed. This suggests the usefulness of chirality control in elucidating ionic transport mechanisms in battery solvents and asymmetric catalysis in such solvents.     

己二酸柱撑水滑石的制备及表征

水滑石（Layered Double Hydroxidex,简称LDHs）是一类具有层状结构的阴离子型粘土^[1]。水滑石的一个重要性质是层间阴离子具有可交换性,引入不同的阴离子,能够得到不同结构和功能和柱撑水石滑,因而阴离子插层是水滑石研究的一个重要方向。各类阴离子如有机和无机阴离子、同多和杂多阴离子以及金属配合物阴离子的柱撑水滑石在文献中都有报道^[2-5]。其中有机阴离子由于在结构上的多样性,使有机阴离子柱撑水滑石具有巨大的应用开发潜力,已经引起了人们的广泛关注^[6-12]。     

The thermal decomposition of Mg-containing carbonate apatites

Carbonate apatites precipitated from an aqueous solution and containing Mg²⁺ and Sr²⁺ ion were studied by thermogravimetric, infrared absorption, and X-ray diffraction methods. In the temperature range of 25–350°C water evolves and at 350–905°C carbonate decomposes. Two effects characterize the Mg-containing system: Weight loss during decomposition is related to carbonate in the apatite and to an additional ion; increased formation of whitlockite. The interrelation between these two phenomena and the presence of carbonate and Mg is discussed.     

Synthesis of poly(aryl ether) dendrimers using an aryl carbonate and mixtures of metal carbonates and metal hydroxides

Four generations of poly(aryl ether) dendrimers containing aryl sulfide or aryl sulfone groups, and aryl fluoride terminal functionality, have been synthesized using the divergent initiator core method and bis(4-fluorophenyl) sulfone as the core precursor. The strategy is based on the divergent approach and an activation/condensation sequence that involves oxidation of the aryl sulfide group and the displacement of the activated halide moiety by a phenolate ion. The phenolate is easily generated in situ from an aryl carbonate. No reaction intermediates were detected when the condensation reaction was carried out utilizing a very active metal carbonate, such as cesium carbonate, in conjunction with magnesium hydroxide or calcium carbonate which removes some of the fluoride ions formed. The samples were characterized by HPLC, MALDI-TOF-MS, NMR, and SEC. Imperfections in some of the molecules of the dendrimers, formed by reaction of the core precusors with an impurity present in the phenol, were also identified by MALDI-TOF-MS. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1781–1798, 1997     

An intermediate for the clean synthesis of ionic liquids: isolation and crystal structure of 1,3-dimethylimidazolium hydrogen carbonate monohydrate

1,3-Dimethylimidazolium-2-carboxylate and carbonic acid have been used to prepare a 1,3-dimethylimidazolium hydrogen carbonate salt by means of a Krapcho reaction. The ability to form hydrogen carbonate azolium salts allows for them to be used as precursors for fast, efficient, environmentally benign, and halide-free syntheses of many ionic liquids by a simple, acid-base reaction of virtually any acid (inorganic, organic, and organic noncarboxylic) with a pK(a) less than that of HCO(3) (-). Additionally, the kinetics of this reaction can be accelerated by employing catalytic amounts of DMSO (a traditional Krapcho solvent used in decarboxylation reactions) to catalyze the decarboxylation. The crystal structure of 1,3-dimethylimidazolium hydrogen carbonate monohydrate is the first example of an imidazolium-based hydrogen carbonate salt. There is a strong 2D hydrogen-bonded network with facially pi-stacked imidazolium cations located in the cavities created by this framework.     

Electrolytic Double-Layer Supercapacitors Based on Sodium-Ion Systems,with Activated-Carbon Electrodes

1 M solutions of NaClO₄ mixed with ethylene carbonate, dimethyl carbonate, and fluoroethylene carbonate were studied as electrolytes for a double-layer supercapacitor with electrodes made of Norit DLC Supra 30 activated carbon. It was shown that the specific capacity of activated carbon depends on the electrolyte composition, range of cycling voltages, and current density. The maximum specific capacitance of 40 F g^–1 was obtained in 1 M NaClO₄ mixed with ethylene carbonate: dimethyl carbonate: fluoroethylene carbonate (4: 5: 1) at a current density of 36 mA g^–1 in the range 10–2300 mV. The minimum specific capacitance was obtained under the same cycling conditions in the electrolyte with 1 M NaClO₄ + ethylene carbonate: dimethyl carbonate (1: 1). The variation of the specific capacitance with the electrolyte composition and range of cycling voltages is accounted for by the existence of a pseudocapacitance caused by the occurrence of side processes on the surface of activated carbon. The impedance spectroscopy was used to find that the introduction of fluoroethylene carbonate into the electrolyte positively affects the charge-transfer resistance and favors an increase in the specific capacitance of activated carbon.     

Synthesis of aryl α-keto esters via the rearrangement of aryl cyanohydrin carbonate esters

A facile synthesis of aryl α-keto esters is reported involving the rearrangement of aryl cyanohydrin carbonate esters induced by the α-carbanion to the nitrile group generated by LDA. However, under similar conditions, an o-benzyloxycyanohydrin carbonate ester rearranged via a domino reaction leading to 2-phenylbenzofuran-3-carboxylic acid.     

Preparation of Dodecyl Dimethyl Benzyl Ammonium Bromide-Doped Cubic CaCO<Subscript>3</Subscript> with Antibacterial Properties

CaCl₂ encapsulated was placed in the hydrothermal reactor of an aqueous solution of Na₂CO₃ and dodecyl dimethyl benzyl ammonium bromide for synthesis of two samples of calcium carbonate by an improved hydrothermal method and one-pot method. Their crystal structure, morphology, chemical composition, and thermal stability of the synthesized samples of calcium carbonate were investigated by XRD, FTIR, SEM, EDS and TGDSC. The sterilization activity of the as-prepared samples was evaluated by killing of Sarcina lutea bacteria. The results indicated that the regular cube capsule-assisted calcium carbonate prepared by hydrothermal process was doped with dodecyl dimethyl benzyl ammonium bromide. Under the same condition, the spindle-shaped calcium carbonate synthesized the one-pot method was not doped with dodecyl dimethyl benzyl ammonium bromide. Among the samples of calcium carbonate, capsule-assisted calcium carbonate had shown better antibacterial effect for Sarcina lutea: in 48 h after its inhibition a zone diameter was 12.3 mm.     

温和条件下电催化CO2与环氧丙烷合成碳酸丙烯酯

 在常温常压下研究了CO2的电化学活化及其与环氧丙烷反应合成碳酸丙烯酯,考察了支持电解质对碳酸丙烯酯产率的影响. 结果表明,含有Br-的支持电解质对合成碳酸丙烯酯起到明显的催化效果. 在实验研究基础上,对反应机理进行了初步推测,认为Mg2+起到路易斯酸的作用并与环氧丙烷的氧原子配位,同时Br-作为亲核试剂进攻环氧丙烷的 C-O 键使其断裂开环,形成的中间物与CO2还原产生的活化物质结合形成碳酸丙烯酯.