Comparison of the Possibilities of Thermal-Lens Detection in Capillaries and Microchips

The conditions of thermal-lens detection are compared for samples with small path lengths: capillaries and microchannels of chemical microchips. The optimum parameters of the optical configuration of a thermal lens spectrometer (beam diameters and their in-sample ratios, and the detector position) were calculated from the theory and confirmed experimentally. The limits of detection of a model chemical substance (ferroin) are estimated at 1 × 10^–8 M for microchips and 5 × 10^–8 M for capillaries. The absolute limits of detection are the same and equal to 3 × 10^–17 M. The advantages and disadvantages of thermal lens detection in capillaries and microchips are discussed.     

Determination of uric acid in human saliva by capillary electrophoresis with electrochemical detection: potential application in fast diagnosis of gout

The clinical manifestations of gout result from the formation and deposition of uric acid (UA) crystals. The monitoring of UA level in less invasive biological samples such as saliva is suggested for diagnosis and therapy of gout, hyperuricemia and the Lesch–Nyhan syndrome. In order to investigate the correlation between trace amounts of UA in human saliva and urine and explore the potential application in fast diagnosis of gout, capillary electrophoresis with electrochemical detection (CE–ED) was applied for the determination of UA in human saliva and urine in this work. Under the optimum conditions, UA and three coexisting analytes could be well separated within 14 min at the separation voltage of 14 kV in 80 mmol L^–1 borax running buffer (pH 7.8). A good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N=3) ranging from 1.09×10^–7 to 5.0×10^–7 mol L^–1 for all analytes. This proposed method has been successfully applied for study of the correlation between the UA content of human saliva and urine, providing an alternative and convenient method for rapid diagnosis of gout.     

Analysis of Flavonoids and Phenolic Acid in Propolis by Capillary Electrophoresis

A high-performance capillary electrophoresis (CE) is developed for the determination of six ingredients – rutin, ferulic acid, apigenin, luteolin, quercetin and caffeic acid – in Propolis and its extract capsules in this work. The effects of several factors such as the acidity and concentration of the running buffer, the separation voltage, the injection time and the wavelength of UV detector were investigated to find the optimum conditions. Under the optimum conditions, the analytes were separated within 14 min in a borax buffer (pH 9.2). Notably, excellent linearity was obtained over two orders of magnitude with detection limits (S/N=3) ranged from 3.7 × 10^–7 to 1.8 × 10^–6 g mL^–1 for all six analytes. The relative standard deviations of the migration times of six constituents ranged between 1.06% and 1.53%. The recoveries of six constituents ranged from 94.9% to 108.4%. This method was successfully used in the analysis of Propolis and its extract capsules with a relatively simple extraction procedure, and the assay results were satisfactory.     

Simultaneous Determination of Aromatic Amines by Liquid Chromatography Coupled with Carbon Nanotubes/Poly (3-methylthiophene) Modified Dual-Electrode

Liquid chromatography with amperometric detection (LC-AD) is developed and applied to simultaneously determine five aromatic amines. In the LC-AD, a new carbon nanotubes/poly(3-methylthiophene) modified dual-electrode is fabricated and then used as the working electrode. It is found that this chemically modified electrode (CME) exhibits efficiently electrocatalytic oxidation for aromatic amines with relatively high sensitivity, stability and long-life. Thus, lower detection in LC-AD can be achieved, which are 4.0 × 10^–8 mol L^–1 for aniline, 1.6 ×10^–7 mol L^–1 for 4-nitroaniline, 1.0 × 10^–7 mol L^–1 for 4-chloroaniline, 1.5 × 10^–7 mol L^–1 for 1-naphthylamine, 1.7 × 10^–7 mol L^–1 for 2-bromoaniline. The recoveries of the five analytes are also determined, which range between 0.95 and 1.05 for drinking water, 0.86 and 1.10 for the LiWa River water.     

Determination of C4–C14 carboxylic acids by capillary zone electrophoresis: Application to the identification of diamide degradation products and partitioning studies

Capillary zone electrophoresis (CZE) was investigated for the determination of linear saturated carboxylic acid homologues ranging from C₄ to C₁₄. Separation conditions were optimised to overcome the problems of decreasing solubility and decreasing selectivity between successive homologues with increasing chain length. Separations were performed at 20°C, using a 20 kV separation voltage and a pH 8 electrolyte containing 30% methanol. A suitable chromophore (4-aminobenzoate) was added to ensure indirect UV detection of the analytes. Calibration curves and repeatability were established. Minimum detectable concentrations of 3·10⁻⁶ mol l⁻¹ were achieved. Resolution between successive homologues was better than 2. The electrophoretic mobility of each homologue (n=7–14) was assessed and a quasi-linear relationship between the mobility value and 1/n was observed. The quantitative analysis of a diamide degradation solution was performed and compared to potentiometric results. The CZE method was also applied to the determination of C₇–C₁₄ partitioning between an organic medium containing tributylphosphate in n-dodecane and different basic solutions. Their behaviour was established according to the chain length and the pH of the aqueous phase. For C₁₀–C₁₄ compounds, results were validated by comparison with gas chromatographic analysis of the organic phases.     

Determination and Differentiation of Two Seemingly Identical Medicinal Herbs by Capillary Electrophoresis with Electrochemical Detection

A high-performance capillary electrophoresis with electrochemical detection (CE-ED) method has been employed for the determination of six bioactive ingredients in traditional Chinese herbs, Herba cepbalanoplosis segeti and Herba cirsii japonici. The effects of several factors such as the acidity and concentration of running buffer, the separation voltage, the applied potential and the injection time on CE-ED were investigated. Under the optimum conditions, the six analytes could be well separated within 21 min in a 75 cm length capillary at the separation voltage of 15 kV in a 50 mmol L^–1 borax running buffer (pH 8.4). A 300 m diameter carbon disk electrode was used as the working electrode positioned carefully opposite the outlet of the capillary in a wall-jet configuration at potential of +950 mV (vs. SCE). Good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N=3) ranged from 1.5×10^–7 to 6.0×10^–7 g mL^–1 for all six analytes. This proposed method has been successfully applied for the analysis of traditional Chinese herbs after a relatively simple extraction procedure, further on, for the differentiation of these above two seemingly identical herbs based on their electropherograms or characteristic electrochemical profiles.     

Some electroanalytical aspects of using pulse polarography for determination of Ge(IV)

Summary Presented data give some informations of analytical importance as a result of pulse polarographic investigations of Ge(IV) in KCl solutions within pH range 3–12 at Ge concentration from 1×10^–4 to 2.5×10^–6 M. It was shown that Ge(IV) can be polarographically active in acidic solution but its reduction interferes with hydrogen gas development. The addition ofp-quinone enables the determination of Ge(IV) without this interfering effect.Suggested explanation of the observed changes in polarographic curves dependent on pH and Ge concentration based on the existence of several polarographically active forms.

---

Elektroanalytische Bemerkungen zur pulspolarographischen Bestimmung von Ge(IV)

Zusammenfassung Unsere Ergebnisse bieten einige Informationen über die pulspolarographische Bestimmung von Ge(IV) in KCl-Lösungen innerhalb pH 3–12 und bei Ge-Konzentrationen zwischen 10^–4 und 2,5×10^–6 M. Es wurde gezeigt, daß Ge(IV) in saurer Lösung polarographisch aktiv ist, seine Reduktion aber durch Wasserstoff-Entwicklung gestört wird. Der Zusatz vonp-Chinon beseitigt diese Störung. Die Änderung der polarographischen Kurven je nach Ge-Konzentration und pH beruht vermutlich auf der Existenz verschiedener polarographisch aktiver Formen.

     

Ultrasound-assisted extraction for the analysis of phenolic compounds in strawberries

A semiautomatic method based on application of ultrasounds has been developed to leach and hydrolyse phenolic compounds, such as naringin, rutin, naringenin, ellagic acid, quercetin and kaempferol, from strawberries. Two grams of lyophilized sample was placed into a sample cell and 5 mL of acetone containing hydrochloric acid was added. The cell was immersed in a water bath and sonicated for 30 s (duty cycle 0.8 s, output amplitude 50% of the nominal amplitude of the converter, applied power 100 W and with the probe placed 2 cm from the top surface of the extraction cell) for three times: each time 5 mL extractant displaced the previous extract. When the extraction was completed, the combined extracts were evaporated for 10 min, diluted to 10 mL with water adjusted to pH 8, and transferred to a cleanup–preconcentration manifold; here the analytes were retained in two in-series minicolumns packed with HR-P sorbent and then eluted with 4 mL methanol, and injected for individual separation–quantitation into a chromatograph–photodiode array detector assembly. Optimisation of the extraction was carried out using samples spiked with 4 mg kg^–1 of each analyte. Calibration curves using the standard addition in red strawberries typically gave linear dynamic ranges of 4–40 mg L^–1 for all analytes, except for ellagic acid (40–400 mg L^–1). The r ² values exceeded 0.98 in all cases.     

Polarographic and voltammetric determination of trace amounts of 2-nitronaphthalene

The polarographic behaviour of 2-nitronaphthalene was investigated by DC tast polarography (DCTP) and differential pulse polarography (DPP), both at a dropping mercury electrode, and differential pulse voltammetry and adsorptive stripping voltammetry, both at a hanging mercury drop electrode. Optimum conditions have been found for the determination of 2-nitronaphthalene by the given methods in the concentration ranges of 2×10^–6–1×10^–4, 2×10^–7–1×10^–4, 1×10^–8–1×10^–4 and 2×10^–9–1×10^–8 M, respectively. Practical applicability of these techniques was demonstrated by the determination of 2-nitronaphthalene in drinking and river water after its preliminary separation and preconcentration using liquid–liquid and solid-phase extraction with limits of determination of 3×10^–10 M (drinking water) and 3×10^–9 M (river water).     

毛细管电泳-安培法测定复方磺胺甲噁唑片中的有效成分

采用毛细管电泳-安培法(CE-AD)同时分离测定了磺胺甲噁唑(sulfamethoxazole,SMZ)、磺胺嘧啶(sulfadiazine,SD)和抗菌增效剂甲氧苄胺嘧啶(trimethoprim,TMP)3种常用磺胺类抗菌药物成分,考察了实验参数对分离、检测体系的影响。在优化实验条件下,以300μm碳圆盘电极作为工作电极,检测电位为1050mV(vs.SCE),在Na2B4O7(13mmol/L)-KH2PO4(18mmol/L)(pH5.8)的缓冲溶液中,分离电压18kV,进样6s,3组分在14min内可实现基线分离。上述3组分浓度分别在5×10-4~5×10-2、5×10-4~0.1和5×10-4~5×10-2g/L范围内与其峰电流强度呈线性关系,检出限达5.1×10-5~8.0×10-5g/L(S/N=3)。该方法已成功应用于复方磺胺甲噁唑片中抗菌活性成分的含量测定,结果令人满意。     

Spectrophotometric determination of manganese with derivatives of 1,3,3-trimethyl-2-[3-(1,3,3-trimethyl-1,3- H-indol-2-ylidene)propenyl]-3 H-indolium

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of manganese in sewage. The method is based on the reaction of manganese with derivatives of 1,3,3-trimethyl-2-[3-(1,3,3-trimethyl-1,3-H-indol-2-ylidene)propenyl]-3H-indolium to form a colored ion associate with a sensitive absorption maximum at 560 nm. The appropriate reaction conditions have been established: pH 8.5–10.0, 1.25–2.3×10^–3 mol L^–1 1-nitroso-2-naphthol, and 1.6–2.4×10^–4 mol L^–1 dye reagent. Beer's law is obeyed for manganese concentrations up to 4.2 mg L^–1. The limit of detection is 0.01 mg L^–1 Mn²⁺; the molar absorptivity of the ion associate was 7.5×10⁴ L mol^–1 cm^–1. The effect of various foreign ions was examined. A reaction mechanism is suggested. The developed procedure was tested for determination of manganese in sewage with satisfactory precision and accuracy.     

Plastified poly(ethylene terephthalate) (PET)-toner microfluidic chip by direct-printing integrated with electrochemical detection for pharmaceutical analysis

Rapid separation and determination of acetaminophen and its hydrolysate with end-channel electrochemical (EC) detection integrated on a plastified poly(ethylene terephthalate) (PET)-toner microchip capillary electrophoresis (CE) system was investigated. In this separation and detection system, a Pt ultramicroelectrode integrated on a three-dimensional adjustor was used as working electrode. Factors influencing the separation and detection were investigated and optimized. Results show that acetaminophen and p-aminophenol can be well separated within 84 s with R.S.D. < 1% for migration time and R.S.D. < 3.6% for detection current for both analytes. Detection limits for both analytes are determined to be 5.0 μM (S/N = 3). This method has been successfully applied to the detection of trace p-aminophenol in paracetamol tablets. The results demonstrate that the PET-toner microchips can obtain better performance than PDMS microfluidic devices but at much lower cost.     

Mechanism of OH radical-induced oxidation of <Emphasis Type="Italic">p</Emphasis>-cresol to <Emphasis Type="Italic">p</Emphasis>-methylphenoxyl radical

The OH radical-induced oxidation of p-cresol to p-methylphenoxyl radical was studied in aqueous solution in a wide pH range by means of pulse radiolysis combined with optical spectroscopy. OH-adduct cyclohexadienyl type radicals were identified as intermediates of the reaction. In the acidic pH range the first-order rate coefficient of phenoxyl radical formation was found linearly dependent on the H₃O⁺ concentration yielding a bimolecular rate coefficient of 1.8 × 10⁸ mol^–1 dm³ s^–1. In the alkaline range a linear dependence was found on the OH^– concentration with rate coefficient of 4.9 × 10¹⁰ mol^–1 dm³ s^–1. These findings were interpreted in terms of acid-base catalysis of the H₂O elimination from the OH-adduct. With the time resolution applied, 30 ns, the radical cation p-CH₃C₆H₄OH^+. was not observed as intermediate.     

Differential pulse polarographic determinations of iodate, bromate and periodate

Summary The application of differential pulse polarography for quantitative trace determination of iodate, periodate and bromate has been investigated. Optimum conditions were found (pulse amplitude 100 mV, scan rate 2 mV s^–1, drop time 2 s). The detection limit for IO ₃ ^– , BrO ₃ ^– and IO ₄ ^– is ca. 2.4×10^–6M at pH 3 whereas at pH 9.3 the reduction of IO ₃ ^– and IO ₄ ^– gave concentration sensitive peak heights down to 9.9 ×10^–7M. A differential pulse polarographic method has been developed for the simultaneous determination of iodate-bromate or periodate-bromate.

---

Bestimmung von Iodat, Bromat und Periodat durch Differential-Pulse-Polarographie

Zusammenfassung Optimale Bedingungen zur Bestimmung dieser Ionen im Spurenbereich wurden ausgearbeitet (Pulsamplitude 100 mV, Scangeschwindigkeit 2 mV s^–1, Tropfzeit 2 s). Die Nachweisgrenze für die drei Ionen liegt bei 2,4 · 10^–6 M für pH 3. Bei pH 9,3 ergaben sich für Iodat und Periodat konzentrationsabhängige Peakhöhen bis herab zu 9,9 · 10^–7 M. Da der Bromatpeak bei wesentlich negativerem Potential auftritt als der Iodat bzw. Periodatpeak konnten Iodat und Bromat bzw. Periodat und Bromat nebeneinander bestimmt werden.

     

Electrophoretic Separation and Quantitative Determination of Halides and Iodohalides of the Choline Series

Iodohalides and halides of the choline series were separated by capillary electrophoresis using an unmodified fused-silica capillary. The developed procedures ensure the determination of iodohalides in the presence of ammonium ions. They were tested in the analysis of model pharmaceuticals of the composition organic iodohalide : polyvinyl pyrrolidone (PVP) (1 : 4). The proposed procedure ensures the estimation of the concentration of choline-mimetic substances in the range from 1 × 10^–5 to 5 × 10^–3 M.     

Determination and Comparison of Phytoestrogens in Both Crude and Parched Flos Sophorae Immaturus by Capillary Electrophoresis with Electrochemical Detection

A method using high-performance capillary electrophoresis with electrochemical detection (CE-ED) has been developed for content comparison of phytoestrogens in both crude and parched Flos sophorae immaturus. Genistin, genistein, rutin, kaempferol and quercetin are important active constituents in this plant. The effects of several factors, such as acidity and concentration of running buffer, separation voltage, applied potential and injection time, were investigated to find the optimum conditions. Detection limits (S/N=3) ranged from 1.1 × 10^–7 to 2.8 × 10^–7gmL^–1 for all five analytes. This method was successfully used to analyse both crude and parched Flos sophorae immaturus after a relatively simple extraction procedure, and the assay results were satisfactory.     

A flow-injection ultrafiltration sampling chemiluminescence system for on-line determination of drug–protein interaction

A flow-injection ultrafiltration sampling chemiluminescence system for on-line determination of cimetidine–bovine serum albumin (BSA) interaction is proposed in this paper. Cimetidine can be oxidized by N-bromosuccinimide (NBS) and sensitized by fluorescein to produce high chemiluminescence emission in basic media. The concentration of cimetidine is linear with the CL intensity in the range 3×10^–7–1×10^–4 mol L^–1 with a detection limit of 1×10^–7 mol L^–1 (3). The drug and protein were mixed in different molar ratios in 0.067 mol L^–1 phosphate buffer, pH 7.4, and incubated at 37 °C in a water bath. The ultrafiltration probe was utilized to sample the mixed solution at a flow rate of 5 µL min^–1. The data obtained by the proposed ultrafiltration flow-injection chemiluminescence method was analyzed with Scrathard analysis and a Klotz plot. The estimated association constant (K) and the number of the binding site (n) on one molecule of BSA by Scrathard analysis and Klotz plot were 3.15×10⁴ L mol^–1 and 0.95, 3.25×10⁴ L mol^–1 and 0.92, respectively. The proposed system proved that flow-injection chemiluminescence analysis coupled with on-line ultrafiltration sampling is a simple and reliable technique for the study of drug–protein interaction.     

Effect of using mixed ion-pairs on PVC-membrane electrodes for ephedrine

Mixed ion-pairs based on the use of ephedrinium (EPH)-TPB plus EPH-reineckate (II) and phenylephrine-TPB plus EPH-reineckate (III) were tried for use in plastic membranes. The results were compared to those of an EPH-reineckate (I) single ion-pair electrode. The Nernstian slopes were 50, 49 and 55 mV decade^–1 for membranes I, II and III, respectively. The linear concentration ranges were 10^–5–10^–1, 4.0 × 10^–5–10^–1 and 6.3 ×^–5–10^–1 M ephedrine. The detection limits were 4 ×^–6,10^–5 and 1.2 × 10^–5 M ephedrine for membranes I, II and III, respectively. The pH ranges were 4–9, 3–9 and 2–8 for I, II and III-membranes, respectively. Selectivity coefficient values for membrane II were better than those for membranes I and III. The effects of increasing KC1 concentration and temperature changes were explained for the three electrodes. The isothermal temperature coefficients were 0.00145, 0.0007 and 0.00055 V/ °C for electrodes I, II and III. Electrode III was applied for the determination of ephedrine in its pharmeaceutical preparations with an overall relative standard deviation range of 1.3–2.4% and an overall mean recovery value of 98.1%.     

Determination of some monoazo compounds by derivative pulse polarography

Summary The determination of some monoazo compounds by derivative pulse polarography has been investigated. The effect of pH is studied, and the optimum pH was determined to give the highest sensitivity. The detection limit is ca. 1×10^–5 M. Response is linear up to 8×10^–4 M.

---

Bestimmung einiger Monoazoverbindungen durch derivative Pulspolarographie

Zusammenfassung Die Bestimmungsmöglichkeiten für einige Monoazoverbindungen durch derivative Pulspolarographie wurden untersucht. Der Einfluß des pH-Wertes wurde getestet und der jeweils optimale Wert in Abhängigkeit von den Substituenten ermittelt. Die Nachweisgrenze liegt bei 1×10^–5 M. Die Anzeige ist linear bis 8×10^–4 M.

     

Determination of thallium in the presence of large excess of lead by anodic stripping voltammetry

The paper is concerned with the determination of traces of thallium, as T1(I), in the presence of very large amounts of lead, by d.c. anodic stripping voltammetry, by adding both a complexing agent and anionic surfactant. The supporting complexing agent was 0.1M solution of EDTA (pH 4.4). The influence of the several surfactants on the signals of lead and thallium was investigated.In 0.1M EDTA at pH 4.4 at the absence of a surfactant, lead does not interfere at concentrations below 10^–4 M. When the electrolyte contains also an anionic surfactant, lead can be tolerated at concentrations up to 2 × 10^–3–6 × 10^–3 M (depending on the type of the surfactant), and the height of the thallium peak remains unaffected. This makes the determination of 10^–8 M T1(I) possible when the molar excess of lead is 2–6 × 10⁵ fold. The method has been tested by determining the thallium content of soil extracts.