Synthesis and photoconductivity study of phthalocyanine polymers. IV. [SiPcNHCH2CH2NH]n

The preparation of a novel polymer of ethylenediamine bridged polymeric silicon phthalocyanine ( I ) with quasi-one-dimensional structure is described. The product was obtained by the condensation polymerization of ethylenediamine and silicon dichloride phthalocyanine (Cl₂SiPc) monomers and was characterized by IR and UV/VIS spectroscopy and elemental analysis. The photoconductivity of the polymer I with the quasi-one-dimensional structure is much better than that of not only the corresponding Cl₂SiPc monomer, but also other phthalocyanine polymers whose molecules are not one-dimensional structures, and showing the one-dimensional effects of molecular structure of increasing photoconductivity. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 959–964, 1997     

Morpholine-phthalocyanine (donor-acceptor) construct: photoinduced intramolecular electron transfer and triplet formation from its charge separation state

Silicon phthalocyanine (SiPc) with two axially attached morpholine (MP) units was prepared, and its photophysics was studied by laser flash photolysis, steady state and time-resolved fluorescence methods. Both the fluorescence efficiency and lifetime of SiPc moiety were remarkably quenched, because of the efficient intramolecular photoinduced electron transfer (PET) from morpholine donors to SiPc moiety. The generated charge separation state (CSS), SiPc(?-)-MP(?+), which was observed by transient absorption spectra, showed a lifetime of 4.8 ns. The triplet quantum yield of SiPc unit in the supra-molecule is unexpectedly high, and the predominant spectral signal in microsecond-scale is triplet-triplet (T(1)-T(n)) absorption. This high triplet yield is due to the charge recombination of CSS that generates T(1) in 32% efficiency: SiPc(?-)-MP(?+) → (3)SiPc-MP. The T(1) formation process occurred efficiently because the CSS SiPc(?-)-MP(?+) has a higher energy (1.65 eV) than that of the triplet state (3)SiPc-MP (1.0 eV). Emission from the CSS was also observed: SiPc(?-)-MP(?+) → SiPc-MP + hν'.     

Molecular dynamics study of salt effects on micellization of N-dodecyl-N,N-dimethyl-3-ammonio-1-propane-sulfonate

In this paper, molecular dynamics simulation methods were used to investigate salt effects on micellization of N-Dodecyl-N,N-Dimethyl-3-Ammonio-1-Propane-sulfonate (SB12-3) in aqueous solution. It is proved that micelle shapes transform from spherical to prolate spherical shape after 30.0?ns simulation with different NaCl and CaCl₂ concentration. By comparison with the eccentricity value without salt addition, SB12-3 shows salt tolerance behaviors due to its unique “inner salt” structure of amphiphilic surfactant. Radial distribution function (RDF), hydrophobic groups solvent accessible surface area (SASA), hydrogen bond, and the deuterium order parameter (S_CD) are to elucidate salt effects on SB12-3 micelle formation. The radius of micelle is achieved by the related RDF value and in accordance with other researches. The addition of NaCl and CaCl₂ didn’t change the structure of micelle significantly and have little effects on the interactions between SB12-3 and water molecule. By comparison with the results without salt system, SASA of hydrophobic groups is almost the same, and SASA of hydrophilic groups and total molecule fluctuates only slightly. This further indicates that the surface of micelles is more hydrophilic due to the strong interactions between SB12-3 and water molecules. The existence of NaCl and CaCl₂ will enhance the hydrophilic interactions.     

Effect of molecular packing on adsorption and micelle formation of a homologous cationic surfactant mixture of hexadecyltrimethylammonium bromide and dodecyltrimethylammonium bromide

The surface tension of an aqueous solution of a hexadecyltrimethylammonium bromide (HTAB) and dodecyltrimethylammonium bromide (DTAB) mixture was measured as a function of the total molality and the composition of DTAB at 298.15 K under atmospheric pressure. The phase diagrams of adsorption and micelle formation were constructed and the excess Gibbs energy was evaluated by analyzing the phase diagrams thermodynamically. Both the excess Gibbs energy in the adsorbed film and the excess surface area are negative; therefore the mutual interaction between HTAB and DTAB is said to be stronger than that between the same species and is enhanced with increasing adsorption. By combining the results with those obtained in previous studies, we claimed that DTAB molecules can use effectively the space among the hydrocarbon chains of HTAB molecules and their polar head groups take a staggered arrangement at the surface so as to reduce the electrostatic repulsion. Consequently the dispersion force between hydrophobic chains becomes stronger. Furthermore, the comparison of the excess Gibbs energy in the adsorbed film with that in the micelle shows that the staggered arrangement of molecules is not necessary in the spherical micelle.     

TTF-Annulated Silicon Phthalocyanine Oligomers and Their External-Stimuli-Responsive Orientational Ordering

Orientational control of functional molecules is essential to create complex functionalities as seen in nature; however, such artificial systems have remained challenge. Herein, we have succeeded in controlling rotational isomerism of μ-oxo silicon phthalocyanine (SiPc) oligomers to achieve an external-stimuli-responsive orientational ordering using intermolecular interactions of tetrathiafulvalene (TTF). In this system, three modes of orientations, free rotation, eclipsed conformation, and staggered conformation, were interconverted in response to the oxidation states of TTF, which varied interactions from association due to formation of mixed-valence TTF dimer to dissociation due to electrostatic repulsion between TTF dications. Furthermore, a stable performance of oligomers as a cathode material in a Li-ion battery proved that the one-dimensionally stacked, rotatable structure of SiPc oligomers is useful to control the orientation of functional molecules toward molecular electronics.     

Aggregation of poly(ethylene oxide)-poly(propylene oxide) block copolymers in aqueous solution: DPD simulation study

The dissipative particle dynamics (DPD) simulation method was applied to simulate the aggregation behavior of three block copolymers, (EO)16(PO)18, (EO)8(PO)18(EO)8, and (PO)9(EO)16(PO)9, in aqueous solutions. The results showed that the size of the micelle increased with increasing concentration. The diblock copolymer (EO)16(PO)18 would form an intercluster micelle at a certain concentration range, besides the traditional aggregates (spherical micelle, cylindrical micelle, and lamellar phase); while the triblock copolymer (EO)8(PO)18(EO)8 would form a spherical micelle, cylindrical micelle, and lamellar phase with increasing concentration, and (PO)9(EO)16(PO)9 would form intercluster aggregates, as well as a spherical micelle and gel. New mechanisms were given to explain the two kinds of intercluster micelle formed by the different copolymers. It is deduced from the end-to-end distance that the morphologies of the diblock copolymer and triblock copolymer with hydrophilic ends were more extendible than the triblock copolymer with hydrophobic ends.     

Synthesis and photophysics of silicon phthalocyanine-perylenebisimide triads connected through rigid and flexible bridges

Three new bisperylenebisimide-silicon phthalocyanine triads [(PBI)(2)-SiPcs 1, 2, and 3] connected with either rigid or flexible bridges were synthesized and characterized. A new synthetic approach to connect SiPc and PBI moieties through click chemistry produced triad 3 with an 80% yield. In (PBI)(2)-SiPc 1, PBI and SiPc are orthogonal and were connected with a rigid connector; triads 2 and 3 bear flexible aliphatic bridges, resulting in a tilted (2) or nearly parallel arrangement (3) of PBI and SiPc. Photoinduced intramolecular processes in these (PBI)(2)-SiPcs were studied and the results are compared with those of the reference compounds SiPc-ref and PBI-ref. The occurrence of electron-transfer processes between the SiPc and PBI units was confirmed by time-resolved emission and transient absorption techniques. Charge-separated (CS) states with lifetimes of 0.91, 1.3 and 2.0 ns for triads 1, 2, and 3, respectively, were detected using femtosecond laser flash photolysis. Upon the addition of Mg(ClO(4))(2), an increase in the lifetime of the CS states to 59, 110 and 200 μs was observed for triads (PBI)(2)-SiPcs 1, 2, and 3, respectively. The energy of the CS state (SiPc(·+)-PDI(·-)/Mg(2+)) is lower than the energy of both silicon phthalocyanine ((3)SiPc*-PDI) and perylenebisimide (SiPc-(3)PDI*) triplet excited states, which decelerates the metal ion-decoupled electron-transfer process for charge recombination to the ground state, thus increasing the lifetime of the CS state. The photophysics of the three triads demonstrate the importance of the rigidity of the spacer and the orientation between donor and acceptor units.     

Photophysical characterization of 1,8 naphthalimide in micelle-diblock copolymer nano-composite: a case of morphological transformation and vesicle formation

This paper reports a morphological transition of the spherical colloidal structures of the sodium dodecyl sulfate-polyethylene-b-polyethylene glycol (SDS-PE-b-PEG) complex and anionic micelle (SDS) to "rod-shaped" colloidal structures induced by a charge transfer dye, 1,8-naphthalimide (NAPMD) (forms anions in aqueous solution by intermolecular charge transfer). The distinct steady-state results of NAPMD in the above two media point toward the formation of a new microenvironment. SDS and SDS-PE-b-PEG form unilamellar (ULV) and multilamellar vesicles (MLV), respectively, along with the rod-shaped colloidal structures as observed from transmission electron microscopy (TEM) images. This dye causes a variation in the hydrophilic/hydrophobic ratio and forms a hydrogen bond with the copolymer in the SDS-PE-b-PEG complex and subjected to electrostatic interaction with the SDS micelle in aqueous solution, which causes this morphological transformation. These vesicles show complete encapsulation of a hydrophobic dye in its interior as evident from the TEM images. ULV get ruptured at low pH, pointing toward their lower stability over MLV at low pH value. The formation of these vesicles with complete idea of its mechanism, encapsulation of bioactive molecules and its rupture at lower pH raise hope as a potential nanoscale vehicle for biologically relevant compounds and their release at low pH medium.     

Physicochemical characterization of polymeric micelles constructed from novel amphiphilic polyphosphazene with poly(N-isopropylacrylamide) and ethyl 4-aminobenzoate as side groups

An amphiphilic graft polyphosphazene (PNIPAm/EAB-PPP) composed of oligo-poly(N-isopropylacrylamide) (PNIPAm) as hydrophilic segments and ethyl 4-aminobenzoate (EAB) as hydrophobic groups was synthesized via ring-opening polymerization and subsequent substitution reaction. The molar ratio of the PNIPAm segment to EAB group was 1.85:0.15. The lower critical solution temperature (LCST) of copolymer was 32.6 degrees C as determined by turbidity method. Micellization behavior of PNIPAm/EAB-PPP in an aqueous phase was characterized by fluorescence technique, 1H NMR, dynamic light scattering (DLS) and transmission electron microscopy (TEM). The critical micelle concentration (CMC) of the graft copolymer in aqueous solution was 0.1mg/ml. The number-averaged particle size of spherical micelles was 80 nm at 25 degrees C with a narrow distribution. TEM also revealed that inter-micellar aggregation was induced in the micelle solution at temperature above LCST of graft copolymer. The thermosensitive PNIPAm/EAB-PPP micelles may be of help to regulate the loading and release of hydrophobic drugs.     

Polymeric complex micelle loaded with axially substituted silicon（IV） phthalocyanine

A novel axially substituted silicon(IV) phthalocyanine, namely di-pyridyloxy axially substituted silicon(IV) phthalocyanine 2 was synthesized and characterized by UV/vis, IR, elemental analysis, MS as well as ¹H NMR spectroscopy. Hydrophobic 2 was encapsulated by amphiphilic triblock copolymer poly[N^ε-(benzyloxycarbonyl-lysine]-poly(ethylene glycol)-poly[N^ε-(benzyl oxycarbonyl) (PLL(Z)-b-PEG-b-PLL(Z)) to form hydrophobic 2-loaded polymeric complex micelle (PIC) (2-loaded PIC). Atom force microscopy (AFM) image showed that 2-loaded PIC formed a spherical nanocarrier with approximately 35-50 nm in diameter. The fluorescence intensity and lifetime of 2-loaded PIC was significantly enhanced by the incorporation 2 into PIC nanocarrier.     

Thermally cleavable surfactants based on furan-maleimide Diels-Alder adducts

Two new surfactant molecules are reported that contain thermally labile Diels-Alder adducts connecting the hydrophilic and hydrophobic sections of each molecule. The two surfactants possess identical hydrophobic dodecyl tail segments but have phenol and carboxylic acid hydrophilic headgroups, respectively. Deprotonation with potassium hydroxide affords the formation of water-soluble surfactants. Room temperature aqueous solutions of both surfactants exhibit classical surface-active agent behavior similar to common analagous alkylaryl surfactant molecules. Critical micelle concentrations have been determined for each surfactant through dynamic surface tension and dye solubilization techniques. Small-angle neutron scattering measurements of the aqueous surfactant solutions indicate the presence of spherical micelles with radii of 16.5 angstroms for the carboxylate and 18.8 angstroms for the phenolate. When these surfactants are exposed to elevated temperatures (>50 degrees C), the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments. Aqueous solutions of each surfactant subsequently exhibit a loss of all surface-active behavior and the micellar aggregates are no longer detectable.     

Atomistic structure of a micelle in solution determined by wide Q-range neutron diffraction

The accepted picture of the structure of a micelle in solution arises from the idea that the surfactant molecules self-assemble into a spherical aggregate, driven by the conflicting affinity of their head and tail groups with the solvent. It is also assumed that the micelle's size and shape can be explained by simple arguments involving volumetric packing parameters and electrostatic interactions. By using wide Q-range neutron diffraction measurements of H/D isotopically substituted solutions of decyltrimethylammonimum bromide (C(10)TAB) surfactants, we are able to determine the complete, atomistic structure of a micelle and its surroundings in solution. The properties of the micelle we extract are in agreement with previous experimental studies. We find that ~45 surfactant molecules aggregate to form a spherical micelle with a radius of gyration of 14.2 ? and that the larger micelles are more ellipsoidal. The surfactant tail groups are hidden away from the solvent to form a central dry hydrophobic core. This is surrounded by a disordered corona containing the surfactant headgroups, counterions, water, and some alkyl groups from the hydrophobic tails. We find a Stern layer of 0.7 bromide counterion per surfactant molecule, in which the bromide counterions maintain their hydration shells. The atomistic resolution of this technique provides us with unprecedented detail of the physicochemical properties of the micelle in its solvent.     

Simulation of the electrical double layer of a spherical micelle of an anionic substance with regard to the solvent structure

Computer simulation methods are employed to consider the structure of the electrical double layer of a spherical micelle in aqueous surfactant solutions with allowance for the contribution of the solvent. Three micelle models were used in the calculations, namely, a macroion with discretely distributed charges and a continual solvent, a spherical model micelle with a coarse-grained representation of the solvent, and a spherical model micelle in an aqueous phase with an explicit account for water molecules. Based on these three models, the radial profiles of the local densities and electric potentials in the electrical double layer, as well as the degrees of binding single-, double-, and triple-charged counterions by the macroion in aqueous surfactant solutions, are calculated with regard to the Lennard-Jones and electrostatic interactions. The allowance for the molecular structure of the solvent leads to qualitatively different local dependences of the electric potential as compared to both the continual and coarse-grained representation of the solvent.     

New amphiphilic silicon(IV) phthalocyanines as efficient photosensitizers for photodynamic therapy: synthesis, photophysical properties, and in vitro photodynamic activities

A novel series of silicon(IV) phthalocyanines substituted axially with one or two 1,3-bis(dimethylamino)-2-propoxy group(s) have been prepared by ligand substitution and alkoxy exchange reactions. Two dicationic and tetracationic phthalocyanines have also been prepared by methylation of two of these compounds. The nonionic phthalocyanines are essentially nonaggregated in common organic solvents and show a weak fluorescence emission, while the methylated derivatives are also nonaggregated, even in aqueous media, and exhibit a strong fluorescence emission. These new phthalocyanines, in particular the unsymmetrical and amphiphilic analogues, are highly potent against HepG2 human hepatocarcinoma cells and J774 mouse macrophage cells with IC50 values down to 0.02 microM. The photodynamic activities are related to the cellular uptake and the efficiency to generate singlet oxygen. A higher positive charge at the phthalocyanine hinders the uptake, reflected by the lower intracellular fluorescence intensity. Fluorescence microscopic studies have also revealed that the unsymmetrical phthalocyanine SiPc[C3H5(NMe2)2O](OMe) (4) has a high and selective affinity to the mitochondria of HepG2 cells.     

PHOTODYNAMIC EFFECTS OF NEW SILICON PHTHALOCYANINES: In vitro STUDIES UTILIZING RAT HEPATIC MICROSOMES AND HUMAN ERYTHROCYTE GHOSTS AS MODEL MEMBRANE SOURCES

Abstract— Photodynamic therapy (PDT) of cancer is a modality that relies upon the irradiation of tumors with visible light following selective uptake of a photosensitizer by the tumor tissue. There is considerable emphasis to define new photosensitizers suitable for PDT of cancer. In this study we evaluated six phthalocyanines (Pc) for their photodynamic effects utilizing rat hepatic microsomes and human erythrocyte ghosts as model membrane sources. Of the newly synthesized Pc, two showed significant destruction of cytochrome P-450 and monooxygenase activities, and enhancement of lipid peroxidation, when added to microsomal suspension followed by irradiation with ∼ 675 nm light. These two Pc named SiPc IV (HOSiPcOSi[CH₃]₂[CH₂]₃N[CH₃]₂) and SiPc V (HOSiPcOSi[CH₃]₂[CH₂]₃N[CH₃]₃¹ I) showed dose-dependent photodestruction of cytochrome P-450 and monooxygenase activities in liver microsomes, and photoenhancement of lipid peroxidation, lipid hydroperoxide formation and lipid fluorescence in rnicrosomes and erythrocyte ghosts. Compared to chloroaluminum phthalocyanine tetrasulfonate, SiPc IV and SiPc V produced far more pronounced photodynamic effects. Sodium azide, histidine, and 2,5-dimethylfuran, the quenchers of singlet oxygen, afforded highly significant protection against SiPc IV- and SiPc V-mediated photodynamic effects. However, to a lesser extent, the quenchers of superoxide anion, hydrogen peroxide and hydroxyl radical also showed some protective effects. These results suggest that SiPc IV and SiPc V may be promising photosensitizers for the PDT of cancer.     

Effects of SDS on the thermo- and pH-sensitive structural changes of the poly(acrylic acid)-based copolymer containing both poly(N-isopropylacrylamide) and monomethoxy poly(ethylene glycol) grafts in water

The effects of SDS on the structural changes of the thermally induced polymeric micelles from a graft copolymer comprising poly(acrylic acid) (PAAc) as the backbone and poly(N-isopropylacrylamide) (PNIPAAm) and monomethoxy poly(ethylene glycol) (mPEG) as the grafts in aqueous solution are studied. At low temperature, SDS micelles form via the hydrophobic association of SDS molecules with the PNIPAAm grafts at a critical aggregation concentration of SDS (cac(SDS)) much lower than its critical micelle concentration. Consequently, the critical aggregation temperature of the graft copolymer is elevated. The corresponding structure of the thermally induced polymeric micelles is characterized by an abrupt reduction in the particle size and an increased tendency toward formation of the monocore structure with a more compact and hydrophobic PNIPAAm microdomain being developed. On the other hand, upon the polymeric micelle formation at high temperature, the copolymer-bound SDS micelle structure is disrupted and the dissociated SDS molecules migrate to the core-shell interface with their alkyl chains residing in the liquidlike region of the hydrophobic PNIPAAm microdomain. The correlation between the polymeric particles and copolymer-bound micelles is further substantiated by showing the change of the colloidal particle size in response to changes in cac(SDS) via adjusting the pH of the aqueous copolymer/SDS solutions.     

Micellization and gelation of aqueous solutions of star-shaped PEG-PCL block copolymers consisting of branched 4-arm poly(ethylene glycol) and polycaprolactone blocks

Star-shaped block copolymers consisting of non-toxic poly(ethylene glycol) and biodegradable polycaprolactone ((PEG5K-PCL)₄) were synthesized by ring-opening polymerization of the ε-caprolactone monomer with hydroxyl-terminated 4-armed PEG as initiator. These biodegradable, amphiphilic star block copolymers showed micellization and sol-gel transition behaviors in aqueous solution with varying concentration and temperature. In the dilute aqueous solutions of star block copolymers, micellization behavior occurred over specific concentration. The 1,6-diphenyl-1,3,5-hexatriene (DPH) solubilization method was used to determine the critical micellization concentration (CMC) of star block copolymers. The obtained micelle size increased with increasing hydrophobic PCL block length. In high-concentration solutions, the star block copolymers showed temperature-sensitive sol-gel transition behavior. The morphology of the micelle and gel was investigated by atomic force microscopy (AFM). As a result, the micelles showed a core-corona spherical structure at concentration near CMC, while the gel showed a mountain-chain-like morphology picture. It was proposed that with increasing the micelle concentration the worm-like micelle clusters formed firstly and the gel was constructed by the packing of micelle clusters.     

Synthesis and photoconductivity study of phthalocyanine polymers. V. 4,4′-diamino-diphenyl ether bridged polymeric SiPc

A novel polymer with quasi-one-dimensional structure of 4,4′-diamino-diphenyl ether bridged polymeric silicon phthalocyanine ( I ) is synthesized by the condensation polymerization of 4,4′-diamino-diphenyl ether (DDE) monomer and dichloride silicon phthalocyanine (Cl₂SiPc) monomer. The structure of the polymer ( I ) is identified by IR subtraction and UV/VIS spectroscopy and elemental analysis. The photoconductivity of the polymer I with quasi-one-dimensional structure is better than that of not only the parent Cl₂SiPc reactant, but also other polymeric phthalocyanines without one-dimensional structures, and showing one-dimensional effect of molecular structure. © 1997 John Wiley & Sons, Inc.     

Synthesis and dilute aqueous solution properties of ester functionalized cationic gemini surfactants having different ethylene oxide units as spacer

New series of ester functionalized quaternary ammonium gemini surfactants having different ethylene oxide units as spacer have been synthesized and investigated for their aggregation behavior and thermodynamic properties of micellization by surface tension, conductivity, and fluorescence methods. The critical micelle concentration (cmc) of these gemini surfactants increases with the increase in the length of polar hydrophilic ethylene oxide spacer. The micellization process has been found to be entropy-driven and dependent on both the tendency of the hydrophobic group of the surfactants to transfer from aqueous environment to interior of micelle as well as the rearrangement of flexible ester-linked ethylene oxide units (hydrophilic spacer) into aqueous phase. The polar ester functional groups and pairs of nonbonding electrons on oxygen atom of ethylene oxide spacer form hydrogen bonding with water molecules enhancing their solubility in aqueous system.     

Photo-induced decolorization of dimethylmethylene blue with selenious acid: a novel method to examine selective monomer-dimer distribution of the dye in micelle

In this report, selenious acid (H2SeO3) has been exploited to study the decolorization of a cationic dye, dimethylmethylene blue (DMMB) with UV-light. Micelles have effectively been employed as organized media to promote the rate of decolorization of the dye molecules. Micellar catalysis has been explained as a consequence of electrostatic, hydrophobic and charge transfer interactions. It has also been shown that strong charge transfer and electrostatic interaction lead to an appreciable enhancement of the reaction rate in micelle, whereas, weak hydrophobic interaction is of marginal importance. Existence of monomer-dimer equilibrium for the dye molecules under certain selective environments has been identified spectrophotometrically. Then the shift of dimer-monomer equilibrium of the dye has been successfully studied in aqueous and micellar environments exploiting photodecolorization process for the dye in solution. 'Salting-in' and 'salting-out' agents were introduced into the reaction mixture to examine the viability of the dye decolorization process for dye contaminated water samples.