Molekül‐ und Kristallstruktur von Bis[chloro(μ‐phenylimido)(η5‐pentamethylcyclopentadienyl)tantal(IV)](Ta–Ta), [{TaCl(μ‐NPh)Cp*}2]

Molecular and Crystal Structure of Bis[chloro(μ‐phenylimido)(η⁵‐pentamethylcyclopentadienyl)tantalum(IV)](Ta–Ta), [{TaCl(μ‐NPh)Cp*}₂] Despite the steric hindrance of the central atom in [TaCl₂(NPh)Cp*] (Ph = C₆H₅, Cp* = η⁵‐C₅(CH₃)₅), caused by the Cp* ligand, the imido‐ligand takes a change in bond structure when this educt is reduced to the binuclear complex [{TaCl(μ‐NPh)Cp*}₂] in which tantalum is stabilized in the unusual oxidation state +4.     

Synthesis and controlled hydrolysis of organolanthanide complexes with mono- and dianionic benzimidazole-2-thiolate ligands

Treatment of Cp(3)Er with one equivalent of benzimidazole-2-thiol (H(2)Bzimt) in THF affords the monoanionic HBzimt(-) complex Cp(2)Er(η(2)-HBzimt)(THF)(2) (1). Reaction of Cp(3)Yb with two equivalents of H(2)Bzimt gives complex CpYb(η(2)-HBzimt)(2)(THF) (2) at room temperature. Treatment of Cp(3)Ln with three equivalents of H(2)Bzimt in reflux THF affords the homoleptic Ln(η(2)-HBzimt)(3)(THF)(2) (Ln = Er (3), Y (4)). Cp(3)Ln reacts with 0.5 equivalents of H(2)Bzimt to afford the dianionic Bzimt(2-) complexes [(Cp(2)Ln)(THF)](2)(μ-Bzimt) (Ln = Yb (5), Er (6), Dy (7), Y (8)) in good yields, in which the Bzimt(2-) ligand bridges the two metals in an μ-η(2):η(2) coordination mode. Interestingly, controlled hydrolysis of complexes Cp(2)Ln(η(2)-HBzimt)(THF)(2), CpLn(η(2)-HBzimt)(2)(THF) and [(Cp(2)Ln)(THF)](2)(μ-Bzimt) produces the same tetranuclear complexes [CpLn(μ(3)-OH)(μ-η(1):η(2)-HBzimt)](4) (Ln = Yb (9), Er (10), Y (11)), indicating that the hydrolysis selectivity greatly depends on the number of coordinated cyclopentadienyl groups. All complexes were characterized by elemental analysis, spectroscopic properties and X-ray single crystal diffraction analysis.     

Dimolybdenum cyclopentadienyl complexes with bridging chalcogenophosphinidene ligands

The reactions of the phosphinidene-bridged complex [Mo(2)Cp(2)(μ-PH)(η(6)-HMes*)(CO)(2)] (1), the arylphosphinidene complexes [Mo(2)Cp(2)(μ-κ(1):κ(1),η(6)-PMes*)(CO)(2)] (2), [Mo(2)Cp(2)(μ-κ(1):κ(1),η(4)-PMes*)(CO)(3)] (3), [Mo(2)Cp(2)(μ-κ(1):κ(1),η(4)-PMes*)(CO)(2)(CN(t)Bu)] (4), and the cyclopentadienylidene-phosphinidene complex [Mo(2)Cp(μ-κ(1):κ(1),η(5)-PC(5)H(4))(η(6)-HMes*)(CO)(2)] (5) toward different sources of chalcogen atoms were investigated (Mes* = 2,4,6-C(6)H(2)(t)Bu(3); Cp = η(5)-C(5)H(5)). The bare elements were appropriate sources in all cases except for oxygen, in which case dimethyldioxirane gave the best results. Complex 1 reacted with the mentioned chalcogen sources at low temperature, to give the corresponding chalcogenophosphinidene derivatives [Mo(2)Cp(2){μ-κ(2)(P,Z):κ(1)(P)-ZPH}(η(6)-HMes*)(CO)(2)] (Z = O, S, Se, Te; P-Se = 2.199(2) ?). The arylphosphinidene complex 2 was the least reactive substrate and gave only chalcogenophosphinidene derivatives [Mo(2)Cp(2)(μ-κ(2)(P,Z):κ(1)(P),η(6)-ZPMes*)(CO)(2)] for Z = O and S (P-O = 1.565(2) ?), along with small amounts of the dithiophosphorane complex [Mo(2)Cp(2)(μ-κ(2)(P,S):κ(1)(S'),η(6)-S(2)PMes*)(CO)(2)], in the reaction with sulfur. The η(4)-complexes 3 and 4 reacted with sulfur and gray selenium to give the corresponding derivatives [Mo(2)Cp(2)(μ-κ(2)(P,Z):κ(1)(P),η(4)-ZPMes*)(CO)(2)L] (L = CO, CN(t)Bu), obtained respectively as syn (Z = Se; P-Se = 2.190(1) ? for L = CO) or a mixture of syn and anti isomers (Z = S; P-S = 2.034(1)-2.043(1) ?), with these diastereoisomers differing in the relative positioning of the chalcogen atom and the terminal ligand at the metallocene fragment, relative to the Mo(2)P plane. The cyclopentadienylidene compound 5 reacted with all chalcogens, and gave with good yields the chalcogenophosphinidene derivatives [Mo(2)Cp(μ-κ(2)(P,Z):κ(1)(P),η(5)-ZPC(5)H(4))(η(6)-HMes*)(CO)(2)] (Z = S, Se, Te), these displaying in solution equilibrium mixtures of the corresponding cis and trans isomers differing in the relative positioning of the cyclopentadienylic rings with respect to the MoPZ plane in each case. The sulfur derivative reacted with excess sulfur to give the dithiophosphorane complex [Mo(2)Cp(μ-κ(2)(P,S):κ(1)(S'),η(5)-S(2)PC(5)H(4))(η(6)-HMes*)(CO)(2)] (P-S = 2.023(4) and 2.027(4) ?). The structural and spectroscopic data for all chalcogenophosphinidene complexes suggested the presence of a significant π(P-Z) bonding interaction within the corresponding MoPZ rings, also supported by Density Functional Theory calculations on the thiophosphinidene complex syn-[Mo(2)Cp(2)(μ-κ(2)(P,S):κ(1)(P),η(4)-SPMes*)(CO)(3)].     

Investigation of the zinc(II)-benzoate-2-pyridinealdoxime reaction system

The employment of pyridine-2-carbaldehyde oxime (paoH) in zinc(II) benzoate chemistry, in the absence or presence of azide ions, is described. The syntheses, crystal structures and spectroscopic characterization are reported for the complexes [Zn(O(2)CPh)(2)(paoH)(2)] (1), [Zn(12)(OH)(4)(O(2)CPh)(16)(pao)(4)] (2) and [Zn(4)(OH)(2)(pao)(4)(N(3))(2)] (3). The Zn(II) centre in octahedral 1 is coordinated by two monodentate PhCO(2)(-) groups and two N,N'-chelating paoH ligands. The metallic skeleton of 2 describes a tetrahedron encapsulated in a distorted cube. The {Zn(12)(μ-OH)(4)(μ(3)-ΟR)(4)}(16+) core of the cluster can be conveniently described as consisting of a central {Zn(4)(μ(3)-ΟR)(4)}(4+) cubane subunit (RO(-) = pao(-)) linked to four {Zn(2)(μ-OH)}(3+) subunits via the OH(-) group of each of the latter, which becomes μ(3). The molecule of 3 has an inverse 12-metallacrown-4 topology. Two triply bridging hydroxido groups are accommodated into the metallacrown ring. Each pao(-) ligand adopts the η(1)?:?η(1)?:?η(1)?:?μ coordination mode, chelating one Zn(II) atom and bridging a Zn(II)(2) pair. Complexes 1 and 2 display photoluminescence with maxima at ～355 nm and ～375 nm, upon maximum excitation at 314 nm; the origin of the photoluminescence is discussed.     

Darstellung carboxylatsubstituierter Rhenium-Gold-Metallatetrahedrane Re2(AuPPh3)2(μ-PCy2)(CO)7(η1-OC(R)O) (R = H,Me, CF3, Ph, 3,4-(OMe)2C6H3)

Synthesis of Carboxylate Substituted Rhenium Gold Metallatetrahedranes Re₂(AuPPh₃)₂(μ-PCy₂)(CO)₇(η¹-OC(R)O) (R = H, Me, CF₃, Ph, 3,4-(OMe)₂C₆H₃) The reaction of the in situ prepared salt Li[Re₂(μ-H)(μ-PCy₂)(CO)₇(ax-C(Ph)O)] ( 2 ) with 1,5 equivalents of monocarboxylic acid RCOOH (R = H ( 4 a ), Me ( 4 b ), CF₃ ( 4 c ), Ph ( 4 d ), 3,4-(OMe)₂C₆H₃ ( 4 e ) in tetrahydrofruan (THF) solution at 60 °C gives within 4 h under release of benzaldehyde (PhCHO) the η¹-carboxylate substituted dirhenium salt Li[Re₂(μ-H)(μ-PCy₂)(CO)₇(η¹-OC(R)O)] (R = H ( 4 a ), Me ( 4 b ), CF₃ ( 4 c ), Ph ( 4 d ), 3,4-(OMe)₂C₆H₃ ( 4 e )) in almost quantitative yield. The lower the pK_a value of the respective carboxylic acid the faster the reaction proceeds. It was only in the case of CF₃COOH possible to prove the formation of the hydroxycarbene complex Re₂(μ-H)(μ-PCy₂)(CO)₇(=C(Ph)OH) ( 5 ) prior to elimination of PhCHO. The new compounds 4 a–4 e were only characterized by ³¹P NMR and ν(CO) IR spectroscopy as they are only stable in solution. They are converted with two equivalents of BF₄AuPPh₃ at 0 °C in a so-called cluster expansion reaction into the heterometallic metallatetrahedrane complexes Re₂(AuPPh₃)₂(μ-PCy₂)(CO)₇(η¹-OC(R)O) (R = H ( 7 a ), Me ( 7 b ), CF₃ ( 7 c ), Ph ( 7 d ), 3,4-(OMe)₂C₆H₃ ( 7 e )) (yield 47–71% ). The expected precursor complexes of 7 a–7 e Li[Re₂(AuPPh₃)(μ-PCy₂)(CO)₇(η¹-OC(R)O] ( 8 ) were not detected by NMR and IR spectroscopy in the course of the reaction. Their existence was retrosynthetically proved by the reaction of 7 b with an excess of the chelating base TBD (1,5,7-Triazabicyclo[4.4.0]dec-5-en) forming [(TBD)_xAuPPh₃][Re₂(AuPPh₃)(μ-PCy₂)(CO)₇(η¹-OC(Me)O] ( 8 b ) in solution. The η¹-bound carboxylate ligand in 7 a–7 e can photochemically be converted into a μ-bound ligand in Re₂(AuPPh₃)₂(μ-PCy₂)(μ-OC(R)O)(CO)₆ (R = H ( 9 a ), Me ( 9 b ), CF₃ ( 9 c ), Ph ( 9 d ), 3.4-(MeO)₂C₆H₃ ( 9 e )) under release of one equivalent CO. All isolated cluster complexes were characterized and identified by the following analytical methods: elementary analysis, NMR (¹H, ³¹P) spectroscopy, ν(CO) IR spectroscopy and in the case of 7 d and 9 b by X-ray structure analysis.     

Unusual thiolate-bridged diiron clusters bearing the cis-HN═NH ligand and their reactivities with terminal alkynes

A series of well-defined thiolate-bridged diiron clusters bearing the cis-HN═NH ligand, [Cp(?)Fe(μ-SEt)(2)(μ-η(1):η(1)-HN═NH)FeCp(?)][PF(6)] (Cp(?) = η(5)-C(5)Me(4)H or η(5)-C(5)Me(5)), are successfully prepared in high yields and fully characterized by spectroscopy and X-ray crystallography. Under moderate conditions, these new Fe/S clusters exhibit high activity, not only for the catalytic cleavage of the N-N bond of hydrazines but also for the activation and coupling of terminal alkynes.     

Facile construction of lanthanide metallomacrocycles with the bridging imidazolate and triazolate ligands and their ring expansions

Four novel tri- or tetranuclear organolanthanide metallomacrocycles [Cp2Ln(mu-Im)(THF)3 (Cp = C5H5, Ln = Yb (1), Er (2)], [Cp2Dy(mu-Im)]4(THF)]3 x 2THF (3), and [Cp'2Yb(mu-eta1:eta2-Tz)]4 x 2THF (Cp' = CH3C5H4) (4) have been synthesized through protolysis of Cp3Ln or Cp'3Yb with imidazole or triazole, indicating that both the bridge-ligand size and the lanthanide-ion radii can be applied in the modulation of the metallomacrocycles. Further investigations on the reactivity of complexes 1, 3, and 4 toward phenyl isocyanate reveal that PhNCO inserts readily into the simple bridge Ln-N bonds of 1 and 3 to yield the corresponding insertion products [Cp2Ln(mu-eta1:eta2-OC(Im)NPh)]3 (Ln = Yb (5), Dy (6)) but cannot insert into the Ln-N bond with a mu-eta1:eta2-bonding mode in 4. The novel bridge ligand [OC(Im)NPh] can expand the numbers of the ring members from 12 to 18 in 5 or 16 to 18 in 6. The number of metal atoms in the metallacycles with the ligand [OC(Im)NPh] is independent of the lanthanide-ion size; both trinuclear lanthanide macrocycles are observed in 5 and 6. All of these new complexes have been characterized by elemental analysis and spectroscopic properties, and their structures have also been determined through X-ray single-crystal diffraction analysis.     

Vinylidene complexes of transition metals : III. Derivatives of cyclopentadienyltricarbonyl rhenium with phenylvinylidene ligands. Crystal and molecular structure of Cp(CO)2Re[CC(Ph)C(Ph)CH2]Re(CO)2Cp

The novel complexes CpRe(CCHPh)(CO)₂ and Cp₂Re₂(μ-CCHPh)(CO)₄ containing a terminal and a bridging phenylvinylidene ligand respectively and the binuclear complex Cp(CO)₂Re[CC(Ph)C(Ph)CH₂]Re(CO)₂Cp were obtained in the reaction of CpRe(CO)₃ with PhCCH.According to an X-ray study of the latter complex the unusual bridging ligand is η¹-bonded to one Re atom and η²-bonded to the other.     

Simultaneous end-on/side-on coordination modes of a diphosphorus tetrahedral complex imposed by pre-organization of oligometallic Cu(I) acceptors

The reaction of the [{CpMo(CO)(2)}(2)(μ,η(2):η(2)-P(2))] (Cp=cyclopentadienyl) metallo-ligand 2 with pre-organized Cu(I) bi- and trimetallic precursors afforded new coordination complexes with unprecedented coordination modes for a Mo(2)P(2) complex. Variable-temperature solution and solid-state (31)P NMR spectroscopy measurements were performed and X-ray diffraction studies revealed an η(2):η(1) coordination mode for the Mo(2)P(2) unit of 2 in the Cu(I) bimetallic complexes 3 and 4. DFT calculations were carried out to highlight the bonding situation of this unprecedented coordination mode in the Cu(I) bimetallic compound 3. It is built up from a side-on coordination of the P-P σ bond to one copper ion and from the interaction of the lone pair of one phosphorus atom with the second copper ion. The remaining available lone pair of the second phosphorus atom can be involved as well to interact with an additional metal centre, as evidenced in the Cu(I) trimetallic compound 5 in which an η(2):η(1):η(1) coordination mode of the ligand 2 is observed. Derivative 3 can be used as a molecular clip to obtain discrete π-stacked dimers through a ligand exchange reaction between acetonitrile ligands and cyano-capped π-conjugated systems, indicating the stability of the new η(2):η(1) coordination mode.     

sp2 C-H activation of dimethyl fumarate by a [(Cp*Co)2-μ-(η4 : η4-toluene)] complex

The well-defined oxidative addition of the vinylic sp(2) C-H bond of dimethyl fumarate is mediated by the cobalt triple decker complex [(Cp*Co)(2)-μ-(η(4) : η(4)-toluene)] (1) at ambient temperature, affording the dinuclear, bridging cobalt hydride, fumaryl compound (2). The C-H activation product has been characterized by mass spectrometry, NMR spectroscopy, and X-ray crystallography. Computational studies of 2 support asymmetric bonding interactions between the two metal centres and the bridging hydride/fumaryl fragments. Monitoring the reaction of dimethyl fumarate with 1 by (1)H NMR spectroscopy allows observation of intermediate [Cp*Co(MeO(2)CCH=CHCO(2)Me)](n) (n = 1 or 2) (3). Addition of 4 equivalents of dimethyl fumarate to 1 results in rapid formation of the bis(ligand) adduct Cp*Co(η(2)-MeO(2)CCH=CHCO(2)Me)(2) (5). Reversibility of the C-H activation was probed by reaction of additional dimethyl fumarate with 2, suggesting ligand induced reductive elimination is possible under ambient conditions. Reaction between 2 and strong σ or π ligands, such as PMe(3) or CO, affords the corresponding Cp*Co(η(2)-MeO(2)CCH=CHCO(2)Me)(L) (L = PMe(3) (7); L = CO (8)) complexes when heated, demonstrating the ability of 2 to undergo two electron redox processes. Further evidence for reversible C-H activation is provided by the isomerization of dimethyl maleate to the corresponding fumarate using 2, suggesting the complex can serve as a source of Co(I) under the appropriate catalytic conditions.     

Synthesis, Structure and Luminescence of a Novel 2D Cadmium Coordination Polymer with a Ligand Generated in situ

The hydrothermal reaction of 1,2-dicyanobenzene with NaN3 in the presence of Cd(NO3)2 affords a novel 2D cadmium tetrazolyl-benzoate,{Cd(tzbz)(H2O)}n (H2tzbz is 2-(5-tetrazolyl)-benzoate). The tzbz ligand is generated in situ through the 2+3 Sharpless cycloaddition reaction and hydrolyzation. Its crystal structure was determined by single-crystal X-ray diffraction method. The crystal crystallizes in the orthorhombic system,space group Pbca with a=9.6659(19),b=7.6366(15),c=25.964(5) ,V=1916.5(7) 3,Z=8,Mr=318.57,Dc= 2.208 g/cm3,F(000)=1232 and μ=2.276 mm-1. The Cd(Ⅱ) atom is coordinated by four tzbz ligands and one water molecule to form a severely distorted pentangle bipyramid. While each tzbz ligand connects to four Cd(Ⅱ) atoms in a μ4-η1,η2,η1,η1,η1 coordination mode to construct a 2D architecture of the title complex. Additionally,the title complex exhibits strong fluorescence at room temperature in the solid state.     

C-X bond formation and cleavage in the reactions of the ditungsten hydride complex [W2(η5-C5H5)2(H)(μ-PCy2)(CO)2] with small molecules having multiple C-X bonds (X = C, N, O)

Two molecules of C(2)(CO(2)Me)(2) or isocyanides could be added to the title hydride complex under mild conditions to give dienyl-[W(2)Cp(2){μ-η(1),κ:η(2)-C(CO(2)Me)=C(CO(2)Me)C(CO(2)Me)=CH(CO(2)Me)}(μ-PCy(2))(CO)(2)] (Cp = η(5)-C(5)H(5)), diazadienyl-[W(2)Cp(2){μ-κ,η:κ,η-C{CHN(4-MeO-C(6)H(4))}N(4-MeO-C(6)H(4))}(μ-PCy(2))(CO)(2)] or aminocarbyne-bridged derivatives [W(2)Cp(2){μ-CNH(2,6-Me(2)C(6)H(3))}(μ-PCy(2)){CN(2,6-Me(2)C(6)H(3))}(CO)]. In contrast, its reaction with excess (4-Me-C(6)H(4))C(O)H gave the C-O bond cleavage products [W(2)Cp(2){CH(2)(4-Me-C(6)H(4))}(O)(μ-PCy(2))(CO)(2)] and [W(2)Cp(2){μ-η:η,κ-C(O)CH(2)(4-Me-C(6)H(4))}(O)(μ-PCy(2))(CO)].     

Precursor approach to lanthanide dioxo monocarbodiimides Ln2O2CN2 (Ln=Y, Ho, Er, Yb) by insertion of CO2 into organometallic Ln-N compounds

We present two organometallic precursor approaches leading to the hitherto-unknown dioxo monocarbodiimides (Ln(2)O(2)CN(2)) of the late lanthanides Ho, Er, and Yb as well as yttrium. One involves insertion of CO(2), and the other one is a straightforward route using a molecular single-source precursor. To this end the reactivity of the activated amido lanthanide compound [(Cp(2)ErNH(2))(2)] towards carbon dioxide absorption under supercritical conditions was studied. Selective insertion of CO(2) into the amido complex yielded the single-source precursor [Er(2)(O(2)CN(2)H(4))Cp(4)], which was characterized by vibrational spectroscopy and thermal and elemental analyses. Ammonolysis of this amorphous compound at 700 degrees C affords Er(2)O(2)CN(2). To gain deeper insight into the structural characteristics of the amorphous precursor, a similar molecular carbamato complex was synthesized and fully characterized. X-ray structure analysis of the dimeric complex [Cp(4)Ho(2){mu-eta(1):eta(2)-OC(OtBu)NH}] shows an unusual bonding mode of the tert-butylcarbamate ligand, which acts as both a bridging and side-on chelating group. Ammonolysis of this compound also yielded dioxo monocarbodiimides, and therefore the crystalline carbamato complex turned out to be an alternative precursor for the straightforward synthesis of Ln(2)O(2)CN(2). Analogously, the dioxo monocarbodiimides of Y, Ho, Er, and Yb were synthesized by this route. The crystal structures were determined from X-ray powder diffraction data and refined by the Rietveld method (Ln=Ho, Er). Further spectroscopic characterization and elemental analysis evidenced the existence of phase-pure products. The dioxo monocarbodiimides of holmium and erbium crystallize in the trigonal space group P[over]3m1. According to X-ray powder diffraction, they adopt the Ln(2)O(2)CN(2) (Ln=Ce-Gd) structure type.     

Coordination polymers based on [Cp*Fe(η5-P5)]: solid-state structure and MAS NMR studies

Slow diffusion reactions of the pentaphosphaferrocene [Cp*Fe(η(5)-P(5))] (Cp*=η(5)-C(5)Me(5) (1)) with CuX (X=Cl, Br, I) in different stoichiometric ratios and solvent mixtures result in the formation of one- and two-dimensional polymeric compounds 2-6 with molecular formula [{Cu(μ-X)}{Cp*Fe(μ(3),η(5):η(1):η(1)-P(5))}](n) (X=Cl (2a), I (2'c)), [{Cu(μ-I)}{Cp*Fe(μ(3),η(5):η(1):η(1)-P(5))}](n) (3), [{CuX}{Cp*Fe(μ(4),η(5):η(1):η(1):η(1)-P(5))}](n) (X=Cl (4a), Br (4b), I (4c), Br (4'b), I (4'c)), [{Cu(3)(μ-I)(2)(μ(3)-I)}{Cp*Fe(μ(5),η(5):η(1):η(1):η(1):η(1)-P(5))}](n) (5) and [{Cu(4)(μ-X)(4)(CH(3)CN)}{Cp*Fe(μ(7),η(5):η(2):η(1):η(1):η(1):η(1):η(1)-P(5))}](n) (X=Cl (6a), Br (6b)), respectively. The polymeric compounds have been characterised by single-crystal X-ray diffraction analyses and, for selected examples, by magic angle spinning (MAS) NMR spectroscopy. The solid-state structures demonstrate the versatile coordination modes of the cyclo-P(5) ligand of 1, extending from two to five coordinating phosphorus atoms in either σ or σ-and-π fashion. In compounds 2a, 2'c and 3, two phosphorus atoms of 1 coordinate to copper atoms in a 1,2 coordination mode (2a, 2'c) and an unprecedented 1,3 coordination mode (3) to form one-dimensional polymers. Compounds 4a-c, 4'b, 4'c and 5 represent two-dimensional coordination polymers. In compounds 4, three phosphorus atoms coordinate to copper atoms in a 1,2,4 coordination mode, whereas in 5 the cyclo-P(5) ligand binds in an unprecedented 1,2,3,4 coordination mode. The crystal structures of 6a,b display a tilted tube, in which all P atoms of the cyclo-P(5) ligand are coordinated to copper atoms in σ- and π-bonding modes.     

Photochemische Reaktionen von Cyclopentadienylbis(ethen)rhodium mit Phenanthren,Acenaphthylen und Triphenylen,sowie ungewöhnlicher H-Austausch zwischen η2-koordinierten Phenanthren- bzw. Acenaphthylen- und η5-Cyclopentadienyl-Liganden

Photochemical Reactions of Cyclopentadienylbis(ethene)rhodium with Phenanthrene, Acenaphthylene, and Triphenylene, and Unusual H Exchange between η²-Coordinated Phenanthrene or Acenaphthylene and η⁵-Cyclopentadienyl Ligands During UV irradiation of [CpRh(C₂H₄)₂] (Cp = η⁵-C₅H₅) in hexane/ether in the presence of phenanthrene one ethene ligand is displaced by coordination of the 9,10 double bond of phenanthrene, and (η⁵-cyclopentadienyl) (η²-ethene)(η²-9,10-phenanthrene)rhodium ( 1 ) is formed. The analogous reaction in hexane in the presence of acenaphthylene occurs with formation of the complexes (η²-1,2-acenaphthylene)(η⁵-cyclopentadienyl)(²-ethene)rhodium 2 and bis(η²-1,2-acenaphthylene)(η⁵-cyclopentadienyl)rhodium 3 in which one and two ethene molecules of [CpRh(C₂H₄)₂], respectively, are substituted by η²-1,2-acenaphthylene. The irradiation of [CpRh(C₂H₄)₂] with triphenylene in hexane yields the compounds [CpRh(η⁴-1,2,3,4-triphenylene)] ( 4 ), [(CpRh)₂(μ-η³: η³-triphenylene)] ( 5 ), and [(CpRh)₃(μ₃-η²: η²: η²-triphenylene)] ( 6 ). Despite the partially very low yields the new complexes could be unequivocally characterized spectroscopically and in the case of 1 and 3 by X-ray structural analysis. The compounds 1 and 2 in solution reveal a novel dynamic behaviour; via an intramolecular C? H activation, exchange occurs between the protons of the η²-coordinated arene and the Cp ligand. The complex 4 in solution is fluxional, too.     

Symmetrical P4 cleavage at cobalt: characterization of intermediates on the way from P4 to coordinated P2 units

Degradation of white phosphorus (P(4)) in the coordination sphere of transition metals is commonly divided into two major pathways depending on the P(x) ligands obtained. Consecutive metal-assisted P-P bond cleavage of four bonds of the P(4) tetrahedron leads to complexes featuring two P(2) ligands (symmetric cleavage) or one P(3) and one P(1) ligand (asymmetric cleavage). A systematic investigation of the degradation of white phosphorus P(4) to coordinated μ,η(2:2)-bridging diphosphorus ligands in the coordination sphere of cobalt is presented herein as well as isolation of each of the decisive intermediates on the reaction pathway. The olefin complex [Cp*Co((i)Pr(2)Im)(η(2)-C(2)H(4))], 1 (Cp* = η(5)-C(5)Me(5), (i)Pr(2)Im = 1,3-di-isopropylimidazolin-2-ylidene), reacts with P(4) to give [Cp*Co((i)Pr(2)Im)(η(2)-P(4))], 2, the insertion product of [Cp*Co((i)Pr(2)Im)] into one of the P-P bonds. Addition of a further equivalent of the Co(I) complex [Cp*Co((i)Pr(2)Im)(η(2)-C(2)H(4))], 1, induces cleavage of a second P-P bond to yield the dinuclear complex [{Cp*Co((i)Pr(2)Im)}(2)(μ,η(2:2)-P(4))], 3, in which a kinked cyclo-P(4)(4-) ligand bridges two cobalt atoms. Consecutive dissociation of the N-heterocyclic carbene with concomitant rearrangement of the cyclo-P(4) ligand and P-P dissociation leads to complexes [Cp*Co(μ,η(4:2)-P(4))Co((i)Pr(2)Im)Cp*], 4, featuring a P(4) chain, and [{Cp*Co(μ,η(2:2)-P(2))}(2)], 5, in which two isolated P(2)(2-) ligands bridge two [Cp*Co] fragments. Each of these reactions is quantitative if performed on an NMR scale, and each compound can be isolated in high yields and large quantities.     

Carbon monoxide-induced N-N bond cleavage of nitrous oxide that is competitive with oxygen atom transfer to carbon monoxide as mediated by a Mo(II)/Mo(IV) catalytic cycle

In the presence of CO, facile N-N bond cleavage of N(2)O occurs at the formal Mo(II) center within coordinatively unsaturated mononuclear species derived from Cp*Mo[N((i)Pr)C(Me)N((i)Pr)](CO)(2) (Cp* = η(5)-C(5)Me(5)) (1) and {Cp*Mo[N((i)Pr)C(Me)N((i)Pr)]}(2)(μ-η(1):η(1)-N(2)) (9) under photolytic and dark conditions, respectively, to produce the nitrosyl, isocyanate complex Cp*Mo[N((i)Pr)C(Me)N((i)Pr)](κ-N-NO)(κ-N-NCO) (7). Competitive N-O bond cleavage of N(2)O proceeds under the same conditions to yield the Mo(IV) terminal metal oxo complex Cp*Mo[N((i)Pr)C(Me)N((i)Pr)](O) (3), which can be recycled to produce more 7 through oxygen-atom-transfer oxidation of CO to produce CO(2).     

Prospects for Three-Electron Donor Boronyl (BO) Ligands and Dioxodiborene (B(2)O(2)) Ligands as Bridging Groups in Binuclear Iron Carbonyl Derivatives

Recent experimental work (2010) on (Cy(3)P)(2)Pt(BO)Br indicates that the oxygen atom of the boronyl (BO) ligand is more basic than that in the ubiquitous CO ligand. This suggests that bridging BO ligands in unsaturated binuclear metal carbonyl derivatives should readily function as three-electron donor bridging ligands involving both the oxygen and the boron atoms. In this connection, density functional theory shows that three of the four lowest energy singlet Fe(2)(BO)(2)(CO)(7) structures have such a bridging η(2)-μ-BO group as well as a formal Fe-Fe single bond. In addition, all four of the lowest energy singlet Fe(2)(BO)(2)(CO)(6) structures have two bridging η(2)-μ-BO groups and formal Fe-Fe single bonds. Other Fe(2)(BO)(2)(CO)(n) (n = 7, 6) structures are found in which the two BO groups have coupled to form a bridging dioxodiborene (B(2)O(2)) ligand with B-B bonding distances of ～1.84 ?. All of these Fe(2)(μ-B(2)O(2))(CO)(n) structures have long Fe···Fe distances indicating a lack of direct iron-iron bonding. One of the singlet Fe(2)(BO)(2)(CO)(7) structures has such a bridging dioxodiborene ligand with cis stereochemistry functioning as a six-electron donor to the pair of iron atoms. In addition, the lowest energy triplet structures for both Fe(2)(BO)(2)(CO)(7) and Fe(2)(BO)(2)(CO)(6) have bridging dioxodiborene ligands with trans stereochemistry functioning as a four-electron donor to the pair of iron atoms.     

Cationic diiron and diruthenium μ-allenyl complexes: synthesis, X-ray structures and cyclization reactions with ethyldiazoacetate/amine affording unprecedented butenolide- and furaniminium-substituted bridging carbene ligands

The novel cationic diiron μ-allenyl complexes [Fe(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(2)(α,β)-C(α)(H)=C(β)=C(γ)(R)(2)}](+) (R = Me, 4a; R = Ph, 4b) have been obtained in good yields by a two-step reaction starting from [Fe(2)Cp(2)(CO)(4)]. The solid state structures of [4a][CF(3)SO(3)] and of the diruthenium analogues [Ru(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(2)(α,β)-C(α)(H)=C(β)=C(γ)(R)(2)}][BPh(4)] (R = Me, [2a][BPh(4)]; R = Ph, [2c][BPh(4)]) have been ascertained by X-ray diffraction studies. The reactions of 2c and 4a with Br?nsted bases result in formation of the μ-allenylidene compound [Ru(2)Cp(2)(CO)(2)(μ-CO){μ-η(1):η(1)-C(α)=C(β)=C(γ)(Ph)(2)}] (5) and of the dimetallacyclopentenone [Fe(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)=C(β)(C(γ)(Me)CH(2))C(=O)}] (6), respectively. The nitrile adducts [Ru(2)Cp(2)(CO)(NCMe)(μ-CO){μ-η(1):η(2)-C(α)(H)=C(β)=C(γ)(R)(2)}](+) (R = Me, 7a; R = Ph, 7b), prepared by treatment of 2a,c with MeCN/Me(3)NO, react with N(2)CHCO(2)Et/NEt(3) at room temperature, affording the butenolide-substituted carbene complexes [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(R)(2)OC(=O)C[upper bond 1 end](H)] (R = Me, 10a; R = Ph, 10b). The intermediate cationic compound [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(Me)(2)OC(OEt)C[upper bond 1 end](H)](+) (9) has been detected in the course of the reaction leading to 10a. The addition of N(2)CHCO(2)Et/NHEt(2) to 7a gives the 2-furaniminium-carbene [Ru(2)Cp(2)(CO)(μ-CO){μ-η(1):η(3)-C(α)(H)[upper bond 1 start]C(β)C(γ)(Me)(2)OC(OEt)C[upper bond 1 end](H)](+) (11). The X-ray structures of 10a, 10b and [11][BF(4)] have been determined. The reactions of 4a,b with MeCN/Me(3)NO result in prevalent decomposition to mononuclear iron species.     

Molybdenum- and tungsten(II) monometallic 3-(2-pyridyl)pyrazole and bimetallic 3-(2-pyridyl)pyrazolate complexes

Molybdenum and tungsten complexes containing the pypzH (3-(2-pyridyl)pyrazole) ligand as a chelating bidentate are prepared: [Mo(CO)(4)(pypzH)], cis-[MoBr(η(3)-allyl)(CO)(2)(pypzH)], cis-[MoCl(η(3)-methallyl)(CO)(2)(pypzH)], [MI(2)(CO)(3)(pypzH)] (M = Mo, W) from [Mo(CO)(4)(NBD)] or the adequate bis(acetonitrile) complexes. The deprotonation of the molybdenum allyl or methallyl complexes affords the bimetallic complexes [cis-{Mo(η(3)-allyl)(CO)(2)(μ(2)-pypz)}](2) or [cis-{Mo(η(3)-methallyl)(CO)(2)(μ(2)-pypz)}](2) (μ(2)-pypz = μ(2)-3-(2-pyridyl-κ(1)N)pyrazolate-2κ(1)N). The allyl complex was subjected to an electrochemical study, which shows a marked connection between both metallic centres through the bridging pyridylpyrazolates.