Low-temperature heat capacity and standard thermodynamic functions of 1-butyl-3-methylimidazolium lactate

The heat capacities of 1-butyl-3-methylimidazolium lactate ionic liquids ([C₄mim][Lact]) were measured with a highly accurate automatic adiabatic calorimeter over the temperature range from 79 to 406 K. And the experimental values of molar heat capacities were fitted to a polynomial equation using least square method in the appropriate temperature ranges. The standard molar heat capacity was determined to be 1734.46?±?5.12 J K^?1 mol^?1 at 298.15 K. The molar enthalpy and molar entropy of the transition were determined to be 15.575?±?0.045 and 64.44?±?0.14 J K^?1 mol^?1. Other thermodynamic properties, such as (H_T???H_298.15) and (S_T???S_298.15), were also calculated. Furthermore, when the temperature reaches 241.87 K, the strongest peaks appeared by analysis of the heat capacity curve. This phenomenon could be explained from the interionic interaction, which is the hydrogen bond between the anions and cations.     

Calorimetric study of poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K

For the first time, the heat capacity $ C_{\text{p}}^{^\circ } $ of poly(2-ethylhexyl acrylate) has been studied in an adiabatic vacuum calorimeter between 7 and 350 K, the standard thermodynamic functions: heat capacity $ C_{\text{p}}^{^\circ } $ (T), enthalpy H°(T) ? H°(0), entropy S°(T) ? S°(0), Gibbs function G°(T) ? H°(0) have been calculated from T → 0 to 350 K. The energy of combustion Δ_c U of the compound under study has been measured in a calorimeter with a stationary bomb and an isothermal shell. The standard enthalpy of combustion Δ_c H° and thermodynamic parameters of formation—enthalpy Δ_f H°, entropy Δ_f S°, Gibbs function Δ_f G°—at T = 298.15 K have been calculated. The results have been used to calculate the thermodynamic characteristics of 2-ethylhexyl acrylate bulk polymerization into poly(2-ethylhexyl acrylate) over the range from T → 0 to 350 K.     

Molar heat capacities and standard molar enthalpy of formation of pyrimethanil butanedioic salt

A noval anilino-pyrimidine fungicide, pyrimethanil butanedioic salt (C₂₈H₃₂N₆O₄), was synthesized by a chemical reaction of pyrimethanil and butanedioic acid. The low-temperature heat capacities of the compound were measured with an adiabatic calorimeter from 80 to 380 K. The thermodynamic function data relative to 298.15 K were calculated based on the heat capacity fitted curve. The thermal stability of the compound was investigated by TG and DSC. The TG curve shows that pyrimethanil butanedioic salt starts to sublimate at 455.1 K and totally changes into vapor when the temperature reaches 542.5 K with the maximal speed of weight loss at 536.8 K. The melting point, the molar enthalpy (Δ_fus H _m), and entropy (Δ_fus S _m) of fusion were determined from its DSC curves. The constant-volume energy of combustion (Δ_c U _m) of pyrimethanil butanedioic salt was measured by an isoperibol oxygen-bomb combustion calorimeter at T = (298.15 ± 0.001) K. From the Hess thermochemical cycle, the standard molar enthalpy of formation was derived and determined to be Δ_f H _m ^o (pyrimethanil butanedioic salt)=?285.4 ± 5.5 kJ mol^?1.     

Molar heat capacity and thermodynamic properties of crystalline Eu(C2H5O2N)2Cl3·3H2O

A complex of europium hydrochloric acid coordinated with 2-aminoacetic acid (C₂H₅O₂N), Eu(C₂H₅O₂N)₂Cl₃·3H₂O was synthesized and characterized by IR and elements analysis. The heat capacities of the complex was measured with an automatic adiabatic calorimeter, and the thermodynamic functions [H _T ? H _298.15] and [S _T ? S _298.15] were derived in the temperature range from 80 to 340 K with temperature interval of 5 K. Thermal decomposition behavior of the complex in nitrogen atmosphere was studied by thermogravimetric (TG) analysis and differential scan calorimeter (DSC).     

Heat capacities and standard molar enthalpy of formation of pyrimethanil maleic salt and pyrimethanil fumaric salt

Novel anilino-pyrimidine fungicides, pyrimethanil maleic salt, and pyrimethanil fumaric salt (C₂₈H₃₀N₆O₄) were synthesized by a chemical reaction of pyrimethanil with maleic acid/fumaric acid. The low-temperature heat capacities of the two compounds were measured with an adiabatic calorimeter from 80 to 350 K. The heat capacities of pyrimethanil fumaric salt are bigger than that of pyrimethanil maleic salt in the measurement temperature range. The thermodynamic function data relative to 298.15 K were calculated based on the heat capacity-fitted curves. The melting points, the molar enthalpies (Δ_fus H _m), and entropies (Δ_fus S _m) of fusion of pyrimethanil maleic salt and pyrimethanil fumaric salt were determined from their DSC curves. The values indicate that pyrimethanil fumaric salt was more thermostable than pyrimethanil maleic salt. The constant-volume energies of combustion (Δ_c U _m ^o ) of pyrimethanil maleic salt and pyrimethanil fumaric salt were measured using an isoperibol oxygen bomb combustion calorimeter at T = (298.15 ± 0.001) K. From the Hess thermochemical cycle, the standard molar enthalpies of formation of the two compounds were derived and determined to be Δ_f H _m ^o (pyrimethanil maleic salt) = ?459.3 ± 4.9 kJ mol^?1 and Δ_f H _m ^o (pyrimethanil fumaric salt) = ?557.2 ± 4.8 kJ mol^?1, respectively. The results suggest that pyrimethanil fumaric salt is more chemically stable than pyrimethanil maleic salt.     

4-硝基苯甲醇的低温热容和标准摩尔生成焓

用精密自动绝热量热计测定了4-硝基苯甲醇（4-NBA）在78 ~ 396 K温区的摩尔热容。其熔化温度、摩尔熔化焓及摩尔熔化熵分别为:(336.426 ± 0.088) K, (20.97 ± 0.13) kJ×mol-1 和 (57.24 ± 0.36) J×K-1×mol-1.根据热力学函数关系式,从热容值计算出了该物质在80 ~ 400 K温区的热力学函数值 [HT - H298.15 K] 和[ST - S298.15 K]. 用精密氧弹燃烧量热计测定了该物质在T＝298.15 K的恒容燃烧能和标准摩尔燃烧焓分别为 (C7H7NO3, s)＝- ( 3549.11 ± 1.47 ) kJ×mol-1 和 (C7H7NO3, s)＝- ( 3548.49 ± 1.47 ) kJ×mol-1. 利用标准摩尔燃烧焓和其他辅助热力学数据通过盖斯热化学循环, 计算出了该物质标准摩尔生成焓 (C7H7NO3, s)＝- (206.49 ± 2.52) kJ×mol-1 .     

Low-Temperature Heat Capacities and Thermodynamic Properties of Octahydrated Barium Dihydroxide,Ba（OH）2·8H2O（s）

Low-temperature heat capacities of octahydrated barium dihydroxide, Ba（OH）2·8H2O（s）, were measured by a precision automated adiabatic calorimeter in the temperature range from T=78 to 370 K. An obvious endothermic process took place in the temperature range of 345-356 K. The peak in the heat capacity curve was correspondent to the sum of both the fusion and the first thermal decomposition or dehydration. The experimental molar heat capacifies in the temperature ranges of 78-345 K and 356-369 K were fitted to two polynomials. The peak temperature, molar enthalpy and entropy of the phase change have been determined to be （355.007±0.076） K, （73.506±0.011） kJ·ol^-1 and （207.140±0.074） J·K^-1·mol^-1, respectively, by three series of repeated heat capacity measurements in the temperature region of 298-370 K. The thermodynamic functions, （Hr-H298.15 k ）and （Sr-S298.15k）, of the compound have been calculated by the numerical integral of the two heat-eapacity polynomials. In addition, DSC and TG-DTG techniques were used for the further study of thermal behavior of the compound. The latent heat of the phase change became into a value larger than that of the normal compound because the melfing process of the compound must be accompanied by the thermal decomposition or dehydration of 71-120.     

Molar heat capacity and thermodynamic properties of Lu(C5H9NO4)(C3H4N2)6(ClO4)3·5HClO4·10H2O

A complex of Lutetium perchloric acid coordinated with l-glutaminic acid (C₅H₉NO₄) and imidazole (C₃H₄N₂), Lu(C₅H₉NO₄)(C₃H₄N₂)₆(ClO₄)₃·5HClO₄·10H₂O was synthesized and characterized. Thermodynamic properties of the complex were studied with an adiabatic calorimeter (AC) from 80 to 390 K and differential scanning calorimetry (DSC) from 100 to 300 K. Two thermal abnormalities were discovered at 220.34 and 248.47 K, which were deduced to be phase transitions. One was interpreted as a freezing-in phenomenon of the reorientational motion of ClO₄ ^? ions and the other was attributed to the orientational order/disorder process of ClO₄ ^? ions. The low-temperature molar heat capacities were measured by AC and the thermodynamic functions [H _T  ? H _298.15] and [S _T  ? S _298.15] were derived in the temperature range from 80 to 390 K with temperature interval of 5 K. Thermal decomposition behavior of the complex was studied by thermogravimetric analysis and DSC.     

Calorimetric study and thermal analysis of berberine sulphate

The heat capacities of berberine sulphate [(C₂₀H₁₈NO₄)₂SO₄·3H₂O] were measured from 80 to 390 K by means of an automated adiabatic calorimeter. Smoothed heat capacities, H _T-H _298.15 and S _T-S _298.15 were calculated. The loss of crystalline water started at about 339.3±0.2 K, and its peak temperature was 365.8±0.6 K. The peak temperature of decomposition for berberine sulphate was at about 391.4±0.4 K by DSC curve. TG-DTG analysis of this material was carried out in temperature range from 310 to 970 K. TG and DSC curves show that there is no melting in the whole heating process. This revised version was published online in August 2006 with corrections to the Cover Date.     

硼砂水溶液的低温热容及热化学性质研究

利用精密绝热量热仪测定了0.03355mol·kg-1的硼砂水溶液在78～351K温区的热容,从实验热容测定结果得到了该水溶液的凝固点为272.905K。用最小二乘法将实验热容值对温度进行拟合,建立了该溶液的热容随温度变化的多项式方程。根据热力学函数关系式,用此多项式方程进行数值积分,获得了以298.15K为基准的该溶液在80～350K温区每隔5K的热力学函数值,并计算出摩尔熔化焓和熔化熵分别为4.536kJ·mol-1和16.22J·K-1·mol-1。根据溶液凝固点降低值,计算出了该溶液的活度为0.99763。     

Low-temperature heat capacities, and thermodynamic properties of solid–solid phase change material bis(1-octylammonium) tetrachlorocuprate

A new crystalline complex (C₈H₁₇NH₃)₂CuCl₄(s) (abbreviated as C₈Cu(s)) was synthesized by liquid phase reaction. Chemical analysis, elemental analysis, and X-ray crystallography were applied to characterize the composition and crystal structure of the complex. Low-temperature heat capacities of the complex were measured by a precision automatic adiabatic calorimeter over the temperatures ranging from 78 to 395 K, and two solid–solid phase changes appeared in the heat capacity curve. The temperatures, molar enthalpies and entropies of the two phase transitions of the complex were determined to be: T _{trs, 1} = 309.4 ± 0.35 K, Δ_trs H _{m, 1} = 16.55 ± 0.41 kJ mol^?1, and Δ_trs S _{m, 1} = 53.49 ± 1.3 J K^?1 mol^?1 for the first peak; T _{trs, 2} = 338.5 ± 0.63 K, Δ_trs H _{m, 2} = 6.500 ± 0.10 kJ mol^?1, and Δ_trs S _{m, 2} = 19.20 ± 0.28 J K^?1 mol^?1 for the second peak. Two polynomial equations of the heat capacities as a function of the temperature were fitted by least-square method. Smoothed heat capacities and thermodynamic functions of the complex relative to the standard reference temperature of 298.15 K were calculated based on the fitted polynomial equations.     

烟酸的低温热容和标准摩尔生成焓

利用精密自动绝热热量计测量了分析纯烟酸在78～400 K温区的低温热容. 用最小二乘法将实验摩尔热容对温度进行拟合, 得到了热容随温度变化的多项式方程. 用此方程进行数值积分, 得到在此温区每隔5 K的舒平热容值和相对于298.15 K时的热力学函数值. 利用精密静止氧弹燃烧热量计测定了烟酸在298.15 K时的恒体积燃烧能为 Δ_cU＝ －(24528.3±16.1) J•g^－1. 依据物质燃烧焓定义计算出烟酸的标准摩尔燃烧焓为: Δ_cH_m^o＝－(3019.05±1.98) kJ•mol^－1. 最后, 依据Hess定律计算出烟酸的标准摩尔生成焓为: Δ_fH_m^o＝－(56.76±2.13) kJ•mol^－1.     

水合烟酸铜Cu(Nic)2•H2O(s)(Nic＝烟酸)的合成、表征及热力学性质

近几十年来,烟酸盐类化合物或配合物由于优越的吸收率高和无毒副作用等特点使其在化妆品、药品和食品等领域作为营养添加剂具有重要应用前景。然而,这类化合物的基础热力学数据极其缺乏,从而限制了这类化合物的理论研究和应用开发的深入开展。为此,本论文利用室温固相合成方法和球磨技术合成了一种新化合物Cu(Nic)2•H2O(s),利用化学分析、元素分析、FTIR和X-射线粉末衍射技术表征了它的结构和组成,利用精密自动绝热热量计准确地测量了它在78-400 K温区的摩尔热容。在热容曲线的T ＝ 326-346 K温区观察到一个明显的固-液相变过程。利用相变温区三次重复实验热容的测量结果确定了此相变过程的峰温、相变焓和相变熵分别为：Tfus＝(341.290 ±0.873) K, DfusHm＝(13.582±0.012) kJ×mol-1, DfusSm＝(39.797±0.067) J×K-1×mol-1。通过最小二乘法将相变前和相变后的热容实验值分别拟合成了热容对温度的两个多项式方程。通过热容多项式方程的数值积分,得到了这个化合物的舒平热容值和相对于298.15 K的各种热力学函数值,并且将每隔5 K的热力学函数值列成了表格。     

Low‐Temperature Heat Capacities and Standard Molar Enthalpy of Formation of Gramine (C11H14N2)

Low‐temperature heat capacities of gramine (C₁₁H₁₄N₂) were measured by a precision automated adiabatic calorimeter over the temperature range from 78 to 401 K. A polynomial equation of heat capacities as a function of temperature was fitted by least squares method. Based on the fitted polynomial, the smoothed heat capacities and thermodynamic functions of the compound relative to the standard reference temperature 298.15 K were calculated and tabulated at 5 K intervals. The constant‐volume energy of combustion of the compound at T=298.15 K was measured by a precision oxygen‐bomb combustion calorimeter as Δ_cU=−(35336.7±13.9) J·g⁻¹. The standard molar enthalpy of combustion of the compound was determined to be Δ_cH_m⁰=−(6163.2±2.4) kJ·mol⁻¹, according to the definition of combustion enthalpy. Finally, the standard molar enthalpy of formation of the compound was calculated to be Δ;_cH_m⁰=−(166.2±2.8) kJ·mol⁻¹ in accordance with Hess law.     

Low-Temperature Heat Capacities and Thermodynamic Properties of Hydrated Nickel L-Threonate Ni（C4H7O5）2·2H2O（S）

Low-temperature heat capacities of the compound Ni（C4H7O5）2·2H2O（S） have been measured with an auto- mated adiabatic calorimeter. A thermal decomposition or dehydration occurred in 350--369 K. The temperature, the enthalpy and entropy of the dehydration were determined to be （368.141 ±0.095） K, （18.809±0.088） kJ·mol ^-1 and （51.093±0.239） J·K^-1·mol^-1 respertively. The experimental values of the molar heat capacities in the temperature regions of 78-350 and 368-390 K were fitted to two polynomial equations of heat capacities （Cp,m） with the reduced temperatures （X）, [X=f（T）], by a least squares method, respectively. The smoothed molar heat capacities and thermodynamic functions of the compound were calculated on the basis of the fitted polynomials. The smoothed values of the molar heat capacities and fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated with an interval of 5 K.     

Molar heat capacity and thermodynamic properties of crystalline Ho(Asp)Cl<Subscript>2</Subscript>·6H<Subscript>2</Subscript>O

The molar heat capacity, C _p,m, of a complex of holmium chloride coordinated with L-aspartic acid, Ho(Asp)Cl₂·6H₂O, was measured from 80 to 397 K with an automated adiabatic calorimeter. The thermodynamic functions H _T-H _298.15 and S _T-S _298.15 were derived from 80 to 395 K with temperature interval of 5 K. The thermal stability of the complex was investigated by differential scanning calorimeter (DSC) and thermogravimetric (TG) technique, and the mechanism of thermal decomposing of the complex was determined based on the structure and the thermal analysis experiment.     

苏糖酸钾的低温热溶及标准摩尔生成焓测定

以苏糖酸与碳酸氢钾反应制得苏糖酸钾K(C₄H₇O₅)·H₂O，通过红外光谱、热重、化学分析及元素分析等对其进行了表征。用精密自动绝热热量计测量了该化合物在78K-395K温区的摩尔热容。实验结果表明，该化合物存在明显的脱水转变，其脱水浓度、摩尔脱水焓以及摩尔脱水熵分别为：(380.524 ± 0.093) K，(19.655 ± 0.012) kJ/mol 和 (51.618 ± 0.051) J/（K·mol）。将78K-362K和382K-395K两个温区的实验热容值用最小二乘法拟合，得到了两个表示热容随温度变化的多项式方程。以RBC-II型恒容转动弹热量计测定目标化合物的恒容燃烧能为(-1749.71 ± 0.91) kJ/mol，计算得到其标准摩尔生成焓为(-1292.56 ± 1.06) kJ/mol。     

Heat capacity and standard molar enthalpy of formation of crystalline 2,6-dicarboxypyridine (C7H5NO4)

Low-temperature heat capacity C_p,m of 2,6-dicarboxypyridine (C₇H₅NO₄; CAS 499-83-2) was precisely measured in the temperature range from (80 to 378) K with a high precision automated adiabatic calorimeter. No phase transition or thermal anomaly was observed in this range. The thermodynamic functions [H_T − H_298.15] and [S_T − S_298.15] were calculated in the range from (80 to 378) K. The standard molar enthalpy of combustion and the standard molar enthalpy of formation of the compound have been determined, and , by means of a precision oxygen-bomb combustion calorimeter at T = 298.15 K. The thermodynamic properties of the compound were further investigated through differential scanning calorimeter (DSC) and the thermogravimetric (TG) analysis.     

Thermodynamics of the terpolymer of carbon monoxide,ethylene, and 1-butene

The heat capacity and the temperatures and enthalpies of physical transformations of the alternating terpolymer of carbon monoxide, ethylene, and 1-butene (the content of butene units is 10.7 mol.%) were studied by adiabatic and differential scanning calorimetry in the temperature range from 6 to 520 K. The energy of terpolymer combustion was measured at 298.15 K on an calorimeter with an isothermal shell and static bomb. The standard thermodynamic functions C°_p(T), H°(T)–H°(0), S°(T)–S°(0), and G°(T)–H°(0) for the range from Т → 0 to 400 K, the standard enthalpy of combustion, and the thermodynamic parameters of formation of the partially crystalline CO—ethylene—1-butene terpolymer at 298.15 K, as well as the thermodynamic characteristics of its synthesis in the range from T → 0 to 400 K were calculated.     

Synthesis,Characterization and Thermodynamic Study of the Solid State Coordination Compound Ni(Nic)2·H2O(s)(Nic=Nicotinate)

A novel compound‐monohydrated nickel nicotinate was synthesized by the method of room temperature solid phase synthesis and ball grinder. FTIR, chemical and elemental analysis, TG/DTG, and X‐ray powder diffraction technique were applied to characterize the structure and composition of the coordination compound. Low‐temperature heat capacities of the solid coordination compound have been measured by a precision automated adiabatic calorimeter over the temperature range from 78 to 386 K. A solid‐solid phase transition occurred in the temperature range of 328–358 K in the heat capacity curve, and the peak temperature, the molar enthalpy and molar entropy of the phase transition were determined to be T_trs=(356.759±0.697) K, Δ_trsH_m=(13.650±0.408) kJ· mol^?1, and Δ_trsS_m= (38.279±0.086) J·K^?1·mol^?1, respectively. The experimental values of the molar heat capacities in the temperature ranges of 78–328 K and 358–386 K were fitted to two polynomials, respectively. The polynomial fitted values of the molar heat capacities and fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were calculated and tabulated at the intervals of 5 K.