Method of Optimization of Blade Shapes in Aerodynamic Design of the Fan Cascade

A method is developed for calculating the geometric parameters of the cascade of an axial fan with a given performance. The method is based on minimization of a certain functional and using the solution of an inverse problem of the flow around the cascade within the framework of the hypothesis of cylindrical cross sections. The functional is minimized by an iterative method of linearization. Examples of calculations are given.     

Strip method for steady heat-conduction problems

Summary An approximate solution of heat-conduction problems can be obtained by the strip method. The method consists of an application of the finite-difference approximation in one physical coordinate and an analytic solution in other coordinates. A simple illustrative example is given and the result is compared with that obtained by the exact solution. By application of this method, an approximate solution is given for the steady heat conduction through a rectangular parallel composite wall with different rates of heat generation.     

复合材料迭层板弯曲分步分析法

本文提出了一种用于分析复合材料迭层板弯曲的新方法。首先利用经典理论进行初步分析,之后,据所得横向剪力,设定横向剪切应变,再进一步分析。本文方法基本未知函数少,基本方程易解,计算精度较高。     

A simple and efficient fourth-order approximation solution for nonlinear dynamic system

In the present paper, based on the classical Magnus expansion, a simple and efficient fourth-order integrator is given for an arbitrary nonlinear dynamic system, which can preserve the qualitative properties of the exact solution. The proposed method can be considered an averaging technique, and only requires evaluations of exponentials of simple unidimensional integrals. Finally, the numerical examples are given to demonstrate the validity and effectiveness of the method of this paper.     

A new method for estimating bounds of eigenvalues

A new method for estimating the bounds of eigenvalues is presented. In order to show that the method proposed is as effective as Qiu's, an undamping spring-mass system with 5 nodes and 5 degrees of freedom is given. To illustrate that the present method can be applied to structures which cannot be treated by non-negative decomposition, a plane frame with 202 nodes and 357 beam elements is given. The results show that the present method is effective for estimating the bounds of eigenvalues and is more common than Qiu's. Project supported by the National Natural Science Foundation (No. 19872028) and the Mechanical Technology Development Foundation of China.     

有前馈的改进ADC方法在Hexapod平台振动控制中的应用

以高稳定精密跟瞄Hexapod平台振动控制为背景,对ADC(Adaptive Disturbance Canceller)方法进行了分析,发现将其应用于平台振动控制中可能存在的两个问题,提出了有前馈的改进ADC方法,从而使方法更好地应用于工程实际.分别将方法应用于复合作动杆单杆实验以及Hexapod平台Adams/Simulink联合仿真,结果一方面说明本文对方法的改进是必要的,一方面说明改进后的方法在实验和仿真中都是有效的,振动可以被抑制90%,相对PID方法结果的优越性是明显的,且可以应用于有较大角度指向功能的Hexapod平台振动控制.     

Calculation of higher natural frequencies of simply supported elastic composite beams using Riccati matrix method

A composite beam is composed of an upper slab and a lower beam connected at the interface by shear transmitting studs. In this paper, an improved and efficient numerical model for the calculation of higher natural frequencies of an elastic composite beam is presented. The numerical model uses the Riccati transfer matrix method. First, the exact field transfer matrix for an element of the beam is represented using the combination of the Analog Beam Method and the transfer matrix method. Second, applying Riccati method to the beam system, the natural frequencies can be easily calculated. The advantage of the present model is to overcome the numerical instabilities of the ordinary transfer matrix method, especially when calculating the higher natural frequencies of structures. A numerical example is given to illustrate and compare the results with those available from other methods. Finally, a parametric study is given to examine the effect of various parameters of the elastic composite beam on its free vibration behavior.     

约束Hamilton系统的积分因子及其守恒量

本文提出了约束Hamilton 系统守恒量构成的一般途径．首先,给出了约束Hamilton 系统的固有约束,并且建立了约束Hamilton 系统正则方程;其次,给出了约束Hamilton 系统的积分因子和守恒量定理;然后构建了约束Hamilton 系统的广义Killing 方程;最后举例说明其应用．显然,这种方法与之前的方法相比较,具有步骤清晰明了、限制条件少、运算简单的优点．     

梁的动力稳定性分析的有限元方法

提出了对梁进行动力学稳定性分析的有限元方法──给出了单元质量矩阵，抗弯刚度矩阵，几何刚度矩阵及相应的Ｍａｔｈｉｅｕ方程，通过坐标变换消除了方程的动力与静力耦合，然后说明了由这种具有参数激励耦合的多自由度系统的Ｍａｔｈｉｅｕ方程求得系统一般参数共振及组合参数共振的过渡曲线的约束参数方法与多尺度方法。最后作为算例求出了均匀简支梁受简谐轴向力作用时的过渡曲线。     

Parametric equations of nonholonomic nonconservative systems in the event space and the method of their integration

In this paper, the parametric equations with multipliers of nonholonomic nonconservative systems in the event space are established, their properties are studied, and their explicit formulation is obtained. And then the field method for integrating these equations is given. Finally, an example illustrating the application of the integration method is given. The Project is supported by the National Natural Science Foundation of China.     

关于边界元方法中柯西主值积分的探讨

本文对边界元方法中的各类积分根据其奇异性作分类，并对主值积分的收敛条件、变量替换等进行了讨论，又给出了变替换附加项显式。文中提供的主值积分配项消奇术在边界元方法中是有普遍意义的。     

土中爆炸成腔问题中确定炸点状态的一种计算反求方法

提出了一种通过给定的土中爆炸成腔毁伤效应确定炸点状态的计算反求方法。该方法将确定炸点状态的反问题转化为求解爆炸毁伤效应的计算值与给定值误差函数最小的优化问题。在反求过程中,采用基于误差减小比率技术的多项式近似模型代替土中爆炸数值分析模型,以便提高反求效率。采用Tikhonov正则化方法克服反求过程中出现的病态问题。在此基础上,引入信赖域管理策略判断当前近似模型与实际模型的逼近程度,以确定最优的反求向量。炸点状态反求结果与实验结果的对比分析表明,该方法能够有效且稳定地通过给定的毁伤效应实现炸点状态的反求,这可为炸点状态的设计提供参考。     

基于模糊推理网的高层结构智能型式优化方法与系统

首先,给出了一种改进加权模糊推理网,建立了基于该推理网的结构性能评价过程与方法,该网兼有模糊综合评判、模糊推理与模糊推理网等算法共同优点;然后,给出了一种基于模糊综合评判的优选法,将其与六个目标级性能的评价网集成,形成了兼有性能评价与优选功能的集成推理网络系统,给出了该集成系统的网络结构图及其决策函数,同时,建立了基于上述方法的结构智能型式优化支持系统;最后,给出了工程实例,结果与实际吻合。实践表明:该方法能以直观的方式表征、存储与利用领域专家在型式优化时的知识与策略,并克服了传统基于模糊逻辑与神经网络的型式优化系统的不足,是解决具有多目标、多层次及不确定信息的型式优化问题的有效方法。     

Path integral synthesis of lyapunov functionals for partial differential equations

A method is given for constructing Lyapunov Functionals for dynamical systems governed by partial differential equations. The functionals are obtained as path integrals in a suitably chosen state space of a generalized gradient operator, and the method may be viewed as an extension to infinite dimensional systems of the variable gradient technique. Some of the fundamental concepts underlying the formalism are reviewed, and examples of applications to some linear, non-linear and hybrid systems are given.     

Difference scheme for an initial-boundary value problem for linear coefficient-varied parabolic differential equation with a nonsmooth boundary layer function

In this paper, using nonumiform mesh and exponentially fitted difference method,a uniformly convergent difference scheme .for an initial-boundary value problem of linear parabolic differential equation with the nonsmooth boundary layer function with respect to small parameter ε is given, and error estimate and numerical result are also given.     

一种三维表面网格自动生成方法

提出了一种改进的区域分解法,用于三维表面三角形和四边形网格的自动生成。基于区域分解法的三维表面网格生成的主要技术包括三维表面三角形面片拓扑关系的建立,表面三角形面片的分组及特征面的确定,空间曲线上网格节点的生成,区域内外边界的合并,最佳剖分面的确定,以及网格的光滑处理等。本文对这些技术进行了详细的介绍。本文提出的表面网格生成方法具有算法可靠、生成网格效率高以及生成网格质量高等优点。最后给出三维表面网格生成实例验证了本文提出方法的可靠性。     

基于残余力向量法和改进遗传算法的结构损伤识别研究

提出了一种基于残余力向量法和改进遗传算法的结构损伤识别方法。文中首先对残余力向量法和遗传算法的基本理论进行了介绍。在无噪声的情况下,使用任意一阶模态数据,残余力向量法都能够对损伤进行准确定位。但是,振动测试数据中往往包含噪声,导致运用残余力向量法进行损伤识别完全不可行。考虑到这个问题,在常规模态分析的基础上,以节点的残余力向量构造用于遗传搜索优化的目标函数形式,然后利用改进的遗传算法重点进行了噪声条件下的结构损伤定位和定量研究。最后,本文用一个平面桁架模型进行了数值模拟,验证了所提出方法的有效性,并对方法应用中存在的一些问题进行了深入分析,得出了一些有益的结论。     

阶梯圆形和环形薄板的大幅度基本振动

利用修正迭代法求出了具有多个阶梯厚度圆形和环形薄板轴对称大幅度自由振动的一种新的解析解，导出了振幅和非线性振动基频的解析关系式，给出了较完善的数值计算结果，所得结果可供工程设计时参考。     

Simulation of non-Gaussian multivariate stationary processes

Mathematical justifications are given for a simulation technique of multivariate non-Gaussian random processes and fields based on Rosenblatt's transformation of Gaussian processes. Different types of convergences are given for the approaching sequence. Moreover an original numerical method is proposed in order to solve the functional equation yielding the underlying Gaussian process autocorrelation function.