Medium effects on fluorescence quantum yields and lifetimes for coumarin laser dyes

Fluorescence quantum yields and lifetimes of coumarin dyes are sharply reduced in polar solvents if amine substituent groups are free to rotate. The polar solvent effect is interpreted in terms of relaxation of excited dye from an initial planar conformation to a twisted zwitterionic state.     

Convenient synthesis of water-soluble nitrilotriacetic acid (NTA) BODIPY dyes

Mono- and bis-NTA-BODIPY dyes have been efficiently synthesized by amide bond formation between hepta-alkylated meso-aryl-BODIPY derivatives and the free amine of mono- and bis-NTA binder surrogates. These new fluorescent hybrids exhibited valuable photophysical properties under buffered aqueous conditions, thus expanding the arsenal of water-soluble BODIPY dyes for potential labeling and monitoring of biological systems and processes.     

Near-infrared fluorescence imaging with water-soluble lead salt quantum dots

A simple procedure for transferring PbS and PbSe quantum dots into water is presented, along with characterization of the resulting water-soluble quantum dots. The external surface of the water-soluble quantum dots include carboxylic groups, which will allow target-specific labeling of cells. As a first example, near-infrared fluorescence imaging of human colon cancer cells is demonstrated using these water-soluble near-infrared fluorophores.     

Near-infrared BODIPY dyes modulated with spirofluorene moieties

New structurally constrained BODIPY dyes having electron-donating substituents were synthesized. As the key compounds for the construction of the BODIPY dyes, 1′H-spiro-[fluorene-9,4′-indeno[1,2-b]pyrrole] (sp-FIP) derivatives with electron-donating groups, such as OMe and NMe₂ at its 6′-position, were prepared using palladium-catalyzed intramolecular direct C-H arylation of a pyrrole moiety. The resulting BODIPY dyes showed bathochromic shift in absorption and fluorescence spectra in comparison to the unsubstituted analogs. Furthermore, pH-dependent reversible spectrum changes of the BODIPY dye were observed with the addition of trifluoroacetic acid (TFA) and subsequent addition of i-Pr₂NEt.     

Synthesis of paramagnetic BODIPY dyes as new double (spin and fluorescence) sensors

Paramagnetic pyrroline and 1,2,3,6-tetrahydropyridine derivatives of BODIPY and their diamagnetic analogs have been synthesized and characterized as novel redox double sensor and cation sensitive reagents.     

Highly water-soluble,near-infrared emissive BODIPY polymeric dye bearing RGD peptide residues for cancer imaging

Near-infrared emissive BODIPY polymeric dye bearing cancer-homing cyclic arginine–glycine–aspartic acid (RGD) peptide residues (polymer B) was prepared by post-polymerization functionalization of BODIPY polymeric dye bearing bromo groups through tetra(ethylene glycol) tethered spacers (polymer A) with thiol-functionalized RGD cancer-homing peptide through thioether bonds under a mild basic condition. Polymer B possesses excellent water solubility, good photostability, biocompatibility and resistance to nonspecific interactions to normal endothelial cells, and can efficiently detect breast tumor cells through specific cooperative binding of cancer-homing RGD peptides to αvβ3 integrins of cancer cells while its parent polymer A without RGD residues fails to target cancer cells.     

Short-wavelength fluorescence caused by sequential two-photon excitation of some cyanine dyes: Effect of solvent viscosity on the quantum yields

Short-wavelength (SW) fluorescence of some cyanine dyes caused by sequential two-photon excitation was studied. The fluorescence quantum yield of the SW fluorescence shows a significant dependence on the solvent viscosity, but only a small dependence on temperature. This reveals the dynamic character of the emitting state: much lower intramolecular barrier and larger solute-solvent viscous drag compared to the S₁ state in the molecular conformational change which is important as a radiationless decay channel.     

Energy transfer method for determination of absolute fluorescence quantum yields

A new method for the determination of absolute fluorescence quantum yields based on simple relative measurements is described. This energy transfer method is particularly suited for studies of dyes in systems of monomolecular layers. The application of the new method to an investigation of the deactivation of excited thiacyanine dye molecules in monolayers gave evidence for radiationless deactivation processes other than thermal equilibration occurring in higher vibronic levels of the excited singlet state.     

Controlling the fluorescence quantum yields of benzothiazole-difluoroborates by optimal substitution

Precise tuning of the fluorescence quantum yield, vital for countless applications of fluorophores, remains exceptionally challenging due to numerous factors affecting energy dissipation phenomena often leading to its counterintuitive behavior. In contrast to the absorption and emission wavelength which can be precisely shifted to the desired range by simple structural changes, no general strategy exists for controllable modification of the fluorescence quantum yield. The rigidification of the molecular skeleton is known to usually enhance the emission and can be practically realized via the limiting molecular vibrations by aggregation. However, the subtle balance between the abundant possible radiative and non-radiative decay pathways makes the final picture exceptionally sophisticated. In the present study, a series of nine fluorophores obtained by peripheral substitution with two relatively mild electron donating and electron withdrawing groups are reported. The obtained fluorescence quantum yields range from dark to ultra-bright and the extreme values are obtained for the isomeric molecules. These severe changes in emission efficiency have been shown to arise from the complex relationship between the Franck–Condon excited state and conical intersection position. The experimental findings are rationalized by the advanced quantum chemical calculations delivering good correlation between the measured emission parameters and theoretical radiative and internal conversion rate constants. Therefore, the described substituent exchange provides a method to rigorously adjust the properties of molecular probes structurally similar to thioflavin T.

A full palette of FQY (form ca. 0 to 98%) was covered by exchanging two groups in a series of nine compounds. The darkest (OMe/CF₃) and brightest (CF₃/OMe) are isomers. All experimental data are supported by TD-DFT calculations.     

Calorimetric, photometric and lifetime determinations of fluorescence yields of fluorescein dyes

Abstract— The fluorescence yields and lifetimes of fluorescein and nine brominated derivatives in basic ethanol are reported. Calorimetric. photometric, and lifetime methods are used independently to measure the yields. A new and simple calorimetric method is presented for this purpose, and the accuracy of the techniques is assessed. There is good agreement between the calorimetric and photometric results. The importance of parameters such as purity, pH, and fluoresence reabsorption is illustrated. The theoretical determination of the natural radiative lifetime from the absorption spectrum is shown to have inherent ambiguities, so that only calorimetric methods provide a reliable, independent check for photometric yield measurements.     

Synthesis of pH-activatable red fluorescent BODIPY dyes with distinct functionalities

A series of tunable pH-dependent BODIPY dyes were synthesized and further functionalized in a Knoevenagel condensation reaction with various aldehydes. In this fashion, monofunctional dyes containing an alkyne, azide, or carboxylic acid (masked as its methyl ester) as ligation sites as well as asymmetrical bifunctional dyes were obtained, without compromising their pH-dependency. In addition, fluorescence excitation and emission maxima for these dyes were shown to be significantly red-shifted in comparison to their tetramethyl precursors.     

Sizes of water-soluble luminescent quantum dots measured by fluorescence correlation spectroscopy

In this paper, fluorescence correlation spectroscopy (FCS) was applied to measure the size of water-soluble quantum dots (QDs). The measurements were performed on a home-built FCS system based on the Stokes-Einstein equation. The obtained results showed that for bare CdTe QDs the sizes from FCS were larger than the ones from transmission electron microscopy (TEM). The brightness of QDs was also evaluated using FCS technique. It was found that the stability of the surface chemistry of QDs would be significantly improved by capping it with hard-core shell. Our data demonstrated that FCS is a simple, fast, and effective method for characterizing the fluorescent quantum dots, and is especially suitable for determining the fluorescent nanoparticles less than 10 nm in water solution.     

Absolute fluorescence quantum yields by relative fluorescence and photoacoustic measurements of low level luminescence quenching

A method is reported which allows absolute fluorescence quantum yields Φ_F to be obtained from relative fluorescence and non-radiative emission (photoacoustic) data. Absolute calibration procedures, external standards, and total fluorescence quenching are eliminated through use of low concentrations of a heavy atom quencher. The relative decrease in fluorescence emission and increase in non-radiative emission as a function of the quencher concentration are related to Φ_F through a set of simultaneous equations. Fluorescence quantum yields of Φ_F = 0.59 ± 0.03 for cresyl violet perchlorate in EtOH and Φ_F = 0.55 ± 0.02 for quinine sulfate in 0.1 N H₂SO₄ are reported.     

Laser induced fluorescence in NO2: absolute fluorescence cross sections and quantum yields

Spectrally resolved collision-free absolute fluorescence cross sections have been measured, for NO₂ excited, by the second harmonic of the Nd: YAG laser. The total cross section into the 523.0–650.0 nm range was found to be 2.3 × 10^?20 cm². The measured absorption cross section of 1.46 × 10^?19 cm² implies a quantum yield of 16% over this range.     

Novel fluorescent dyes with fused perylene tetracarboxlic diimide and BODIPY analogue structures

Two novel fluorescent dyes based on perylene tetracarboxylic diimides and BODIPY were designed and synthesized. Significant features, such as longer wavelength absorption and emission, high fluorescence quantum yields, and strong electron accepting abilities, are observed for these compounds.     

Photophysics on surfaces: determination of absolute fluorescence quantum yields from reflectance spectra

A method for the calculation of absolute fluorescence quantum yields for dyes attached to solid particles based on reflectance measurements is reported. The same procedure allows calculation of true reflectance spectra (free of fluorescence) for highly fluorescent materials as well. Samples ofcresyl violet were immobilized by adsorption on microgranular cellulose in the concentration range 4.5 x 10(-9) to 3.8 x 10(-6) mol g(-1). Diffuse and total reflectance spectra were recorded with and without insertion of an optical absorption filter between the output of the integrating sphere of a reflectance spectrometer and the photodetector in order to block fluorescence partially. From these data, the relative emission spectrum of the dye, the filter transmission spectrum, and the detector sensitivity, true reflectances and absolute fluorescence quantum yields were recovered. Observed fluorescence quantum yields, affected by dye aggregation and inner filter effects, were concentration and wavelength dependent, ranging approximately between 0.1 and 0.6. The analysis of remission function spectra showed that dye aggregation is negligible up to a concentration of 1.41 x 10(-7) mol g(-1). Fluorescence data were corrected for reemission and reabsorption using a suitable model [Lagorio, M. G.; Dicelio, L. E.; Litter, M. I.; San Roman, E. J. Chem. Soc., Faraday Trans. 1998, 94, 419]. Application of this model to samples showing no aggregation yielded a wavelength-independent true fluorescence quantum yield of 0.60 +/- 0.05, similar to values found in solution. The usage of cresyl violet as a reference for the evaluation of fluorescence quantum yields for weakly fluorescing samples in the solid phase is discussed.     

Exceptional near-infrared fluorescence quantum yields and excited-state absorptivity of highly conjugated porphyrin arrays

We show that meso-to-meso ethyne-bridged (porphinato)zinc(II) oligomers (PZnn structures) define exceptional low band gap organic materials that possess both large magnitude NIR S1 --> S0 fluorescence quantum yields and substantial S1 --> Sn absorptive cross-sections, tunable over a wide 850-1400 nm spectral window. These PZnn species possess fluorescence quantum yields (phif values) comparable to the highest reported for NIR laser dyes in the 750-900 nm regime; importantly, these emitters do not suffer from commonly cited tricarbocyanine dye drawbacks of poor photostability and substantial phif sensitivity to solvent polarity. Furthermore, tauo (kr-1) values determined using the Strickler-Berg method highlight the close correlation of fluorescence quantum yields with S0 --> S1 integrated oscillator strength and demonstrate a rare if not unique example of broad NIR spectral domain fluorescence energy modulation, where phif magnitudes follow a simple Strickler-Berg relationship.     

Multiple BODIPY derivatives with 1,3,5-triazine as core: balance between fluorescence and numbers of BODIPY units

The multiple BODIPY derivatives could exhibit higher fluorescence than mono-BODIPY derivatives but also might produce the stronger aggregation-induced quenching effect. It is important to investigate the relationship between fluorescence and numbers of BODIPY units. In this work, series of multiple BODIPY derivatives 2–5 with 1,3,5-triazine as core were designed and synthesized in high yields. A subtle balance between the fluorescence enhancement of multiple BODIPY units and fluorescence quenching based on H-aggregation of multiple BODIPY units was observed for these multiple BODIPY derivatives. Compound 3 bearing two BODIPY units with triazine as core presented the strongest fluorescence emission and highest fluorescence quantum yield. Compound 3 was successfully applied in viscosity measurement, exhibiting the linear relationship between fluorescence intensity (or steady-state emission anisotropy) and viscosity.     

Supramolecular control of complexation-induced fluorescence change of water-soluble, beta-cyclodextrin-modified CdS quantum dots

The fluorescence of beta-cyclodextrin-modified CdS quantum dots can be reversibly tuned by introducing different substrates in aqueous media.     

Fluorescence spectra,fluorescence quantum yields and fluorescence lifetimes of polymers having trans-1,2-dicarbazolylyclobutane or carbazolyl group

Quantum yields, lifetimes and shapes of fluorescence from polymers containing the trans-1,2-dicarbazolylcyclobutane (DCZB) or carbazolyl structures were studied in N,N-dimethylformamide. No sandwich-type excimer formation was observed for DCZB polymers. The so-called second excimer observed in poly(9-vinylcarbazole) might also be produced in poly(9-ethyl-3-vinylcarbazole).