Lanthanum(III) isopropoxide catalyzed chemoselective transesterification of dimethyl carbonate and methyl carbamates

A practical transesterification of less reactive dimethyl carbonate and much less reactive methyl carbamates with primary (1°), secondary (2°), and tertiary (3°) alcohols was established with the use of a lanthanum(III) complex, which was prepared in situ from lanthanum(III) isopropoxide (3 mol %) and 2-(2-methoxyethoxy)ethanol (6 mol %). In particular, corresponding carbonates and carbamates obtained were of synthetic utility from the viewpoint of the selective protection and/or deprotection of 1°-, 2°-, and 3°-alcohols.     

Kinetic Resolution of (R,S)-2-Butanol Using Enzymatic Synthesis of Esters

Kinetic resolution of (R,S)-2-butanol using enzymatic synthesis of esters has been studied. (R,S)-2-Butanol is commonly found as a racemic mixture, and the products of its esterification are racemic mixtures too. This work is of great significance in the field of the enzymatic kinetic resolution due to the little information found in literature about the resolution of (R,S)-2-butanol as pure compound. So, this article is a contribution about the enzymatic resolution of (R,S)-2-butanol. The reaction here studied is the esterification/transesterification of (R,S)-2-butanol in organic media (n-hexane) using as biocatalyst the lipase Novozym 435?. The main target of this study is to analyze the influence of certain variables in this reaction. Some of these variables are acyl donor (acids and esters), concentration of substrates, enzyme/substrate ratio, and temperature. The main conclusions of this study are the positive effect of higher substrates concentration (1.5 M) and larger amount of enzyme (13.8 g mol(-1) substrate) on kinetic resolution rate but not a very noticeable effect on enantiomeric excesses. The longer the carboxylic acid chain is, the better results are obtained. Besides to achieve a satisfactory kinetic resolution, it is recommendable to select reaction times (180 min) at which the highest substrate enantiomeric excess is reached (~60%). The temperature has not an appreciable influence on the resolution in the range studied (40-60 °C). When an ester (vinyl acetate) is used as acyl donor, the resolution shows better results than when using a carboxylic acid as acyl donor (ee(s)?~90% at 90 min). Moreover, Michaelis-Menten parameters, v(max) and K(M), were determined, 0.04 mol l(-1) min(-1) and 0.41 mol l(-1), respectively.     

In situ generated "lanthanum(iii) nitrate alkoxide" as a highly active and nearly neutral transesterification catalyst

In situ generated lanthanum(iii) nitrate alkoxide is a highly active and nearly neutral transesterification catalyst, which can promote non-epimerized transesterification of α-substituted chiral carboxylic esters under reflux conditions.     

Solvent extraction, spectrophotometric and inductively coupled plasma atomic emission spectroscopic (ICP-AES) determination of lanthanum(III) with crown hydroxamic acid

A new crown hydroxamic acid, 5,14-N,N'-hydroxyphenyl-4,15-dioxo-1,5,14,18-tetraaza hexacosane (NHDTAHA) for the extraction and spectrophotometric determination of lanthanum(III) is described. Lanthanum(III) forms a yellow coloured complex with NHDTAHA, which is extracted with chloroform, having molar absorptivity 7.7 x 10(3) 1 mol(-1) per cm at 372 nm. The system obeys Beer's law in the range 1.2-20 ppm of lanthanum. The extract is directly aspirated for ICP-AES measurements, the limits for estimation are 5-140 ppb of lanthanum. Lanthanum has been determined in monazite sand and standard samples.     

Synthesis of 2-alkyl- and aryl-3-ethoxycarbonyl-2,5-dihydrofurans through gold-catalyzed intramolecular hydroalkoxylation

Treatment of a wide range of functionalized hydroxyallenic esters with 5 mol % Ph(3)PAuCl and 5 mol % AgOTf in CH(2)Cl(2) at 25 °C for 1 h produced selectively 2-alkyl- and aryl-3-ethoxycarbonyl-2,5-dihydrofurans in good to excellent yield through intramolecular hydroalkoxylation by a 5-endo mode.     

Synthesis and thermal decomposition of N,N-dialkoxyamides

N,N-dialkoxyamides 1c, a virtually unstudied member of the new class of anomeric amides, amides bearing two electronegative atoms at nitrogen, have been synthesised in useful yields directly from hydroxamic esters using phenyliodine(III)bis(trifluoroacetate) (PIFA). Infrared carbonyl stretch frequencies and carbonyl (13)C NMR properties have been reported, which support strong inhibition of amide resonance in these amides. Their thermal decomposition reactions in mesitylene at 155 °C proceed by homolysis to form alkoxyamidyl and alkoxyl free radicals in preference to HERON rearrangements to esters. The reactions follow first-order kinetics and for a series of N,N-dimethoxy-4-substituted benzamides, activation energies of 125-135 kJ mol(-1) have been determined together with weakly negative entropies of activation.     

Simultaneous spectrophotometric determination of La, Ho, Mn 5-Br-PADAP complexes using multivariate calibration with partial least-squares (PLS) data evaluation

A simple and fast analytical pocedure is proposed for the simultaneous spectrophotometric determination of lanthanum, holmium and manganese in synthetic ceramics, (La(0.8-x) Hox Sr0.2 MnO3), by using the partial least-squares (PLS) method. As chromogenic agent 5-Br-PADAP [2-(5-bromo-2-pyridylazo)-5-diethylaminophenol] was used, which form colored complexes with the three elements studied. To avoid metal hydrolysis, a mixture of ethanol and Triton X-100 at pH 9.5 was used for all experiments. A set of 17 calibration solutions measured throughout the 400-700 nm wavelength range was used in the calibration step. The concentration range for Mn(II) was 1-12 x 10(-6) mol L-1, while the range for the rare earth elements La(III) and Ho(III) was 2-8 x 10(-6) mol L-1. In order to demonstrate the applicability of the proposed method, a set of artificial samples containing the three analytes in variable proportions was prepared and analyzed. The analytical results obtained were quite acceptable with relative errors not greater than 7% in most cases.     

Obtaining aliphatic branched polycarbonates via simple copolymerization of trimethylene carbonate with cyclic carbonate containing pendant ester groups

Different possibilities for obtaining branched, functional carbonate copolymers are presented in this study. Copolymers were synthesized according to the ring‐opening polymerization (ROP) of the cyclic carbonate monomers, containing pendant ester groups. As an example, we chose copolymerization of ethyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate (MTC‐Et) with trimethylene carbonate (TMC), using zinc (II) and lanthanum (III) acetylacetonates as ROP initiators. The transesterification processes of ester groups in pendant, short chains, appearing during conducted copolymerization, led to the establishment of two different fractions: first‐branched and high molecular weight fraction and second‐linear and low molecular weight. The content of this high‐molecular‐weight fraction increased with both: the amount of MTC‐Et in started reaction mixture and the time of conducted copolymerization. Reactivity constants in studied reaction were determined. It was possible to obtain the copolymer fraction (ca. 30%) with molecular weight of up to a million g/mol, with a highly branched chain microstructure using lanthanum (III) acetylacetonate as initiator. Conclusions were based on detailed NMR analysis, determining microstructure of the copolymer chains and additionally on GPC and DSC measurement. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 808–819     

An acid-catalyzed macrolactonization protocol

[reaction: see text] An efficient macrolactonization protocol devoid of any base was developed derived from the use of vinyl esters in transesterification. Subjecting a hydroxy acid and ethoxyacetylene to 2 mol % [RuCl(2)(p-cymene)](2) in toluene followed by addition of camphorsulfonic acid or inverse addition provided macrolactones in good yields.     

Rapid C-H bond activation by a monocopper(III)-hydroxide complex

One-electron oxidation of the tetragonal Cu(II) complex [Bu(4)N][LCuOH] at -80 °C generated the reactive intermediate LCuOH, which was shown to be a Cu(III) complex on the basis of spectroscopy and theory (L = N,N'-bis(2,6-diisopropylphenyl)-2,6-pyridinedicarboxamide). The complex LCuOH reacts with dihydroanthracene to yield anthracene and the Cu(II) complex LCu(OH(2)). Kinetic studies showed that the reaction occurs via H-atom abstraction via a second-order rate law at high rates (cf. k = 1.1(1) M(-1) s(-1) at -80 °C, ΔH(?) = 5.4(2) kcal mol(-1), ΔS(?) = -30(2) eu) and with very large kinetic isotope effects (cf. k(H)/k(D) = 44 at -70 °C). The findings suggest that a Cu(III)-OH moiety is a viable reactant in oxidation catalysis.     

液膜萃取法回收磷酸体系中的微量镧

通过斜率分析法研究了P204和TOPO从磷酸体系中液液萃取微量镧的反应机制和热力学,推测出一种可能的反应历程和萃合物结构,得到萃取反应式和反应的平衡常数K=104.502,焓变ΔH=-13.02 kJ.mol-1,自由能ΔG=-25.686 kJ.mol-1,熵变ΔS=0.0425kJ.(mol.K)-1。在液液萃取反应机制研究的基础上,采用液膜萃取法进行磷酸体系中微量镧的富集回收研究,考察了载体P204(2%～10%w/w)和TOPO(1%～10%w/w)、表面活性剂磺化聚丁二烯LYF(1%～10%w/w)、内萃取剂HCl(1～5 mol.L-1)和水乳体积比A/O(2:1～7:1)对液膜萃取收率及稳定性的影响。在最优条件下,可回收94.10%～95.94%的镧,并且膜溶胀率为8%～17%,破损率为0.45%～1.93%,能够维持较好的液膜稳定性。研究结果对磷酸中的微量稀土镧回收利用具有一定的参考价值。     

Thermal investigations of dehydration of lanthanide(iii) 5-nitroanthranilates

The 5-nitro-2-anthranilates of lanthanum(III), samarium(III), terbium(III), erbium(III) and lutetium(III) were obtained as hydrates having 2.5 mol of water molecules per 1 mol of compound. The compounds are isostructural. The processes of dehydration and rehydration were investigated. The first step of dehydration does not cause the change of crystal structure. The entire dehydration gives anhydrous compounds with different structure than the structure of hydrates. However, the dehydration of La, Sm, Tb and Er is reversible - the rehydration process gives the complexes having the same crystal structure as the initial compounds. Only the anhydrous lutetium complex under the influence of moisture does not give the starting compound. This revised version was published online in July 2006 with corrections to the Cover Date.     

Asymmetric phase-transfer catalyzed glycolate alkylation, investigation of the scope, and application to the synthesis of (-)-ragaglitazar

[Reaction: see text]. Asymmetric glycolate alkylation using a protected acetophenone surrogate under solid-liquid phase-transfer conditions is a new approach to the synthesis of 2-hydroxy esters and acids. Diphenylmethyloxy-2,5-dimethoxyacetophenone 1 with a trifluorobenzyl cinchonidinium bromide catalyst 9 (10 mol %) and cesium hydroxide provided S-alkylation products 2 at -35 degrees C in high yield (80-99%) and with excellent enantioselectivities using a wide range of electrophiles (80-90% ee). Alkylated products were elaborated to useful alpha-hydroxy intermediates 3 using bis-TMS peroxide Baeyer-Villiger conditions and selective transesterification reactions. The ester products have been enantioenriched by simple recrystallization from ether to give a single isomer (99% ee). A tight ion-pair model is proposed for the observed S-stereoinduction that includes van der Waals contacts between the extended enolate and the isoquinoline of the catalyst. To demonstrate the utility of the new methodology, the anti-diabetes drug (-)-ragaglitazar 24 was synthesized in six steps from a key 2-alkoxy-3-p-phenoxypropionic acid 26 that was made using PTC glycolate alkylation.     

Determination of ultra-trace amounts of arsenic(III) by flow-injection hydride generation atomic absorption spectrometry with on-line preconcentration by coprecipitation with lanthanum hydroxide or hafnium hydroxide

A time-based flow-injection (FI) procedure for the determination of ultra-trace amounts of inorganic arsenic(III) is described, which combines hydride generation atomic absorption spectrometry (HG-AAS) with on-line preconcentration of the analyte by inorganic coprecipitation-dissolution in a filterless knotted Microline reactor. The sample and coprecipitating agent are mixed on-line and merged with an ammonium buffer solution, which promotes a controllable and quantitative collection of the generated hydroxide on the inner walls of the knotted reactor incorporated into the FI-HG-AAS system. Subsequently the precipitate is eluted with 1 mol 1(-1) hydrochloric acid, allowing ensuing determination of the analyte via hydride generation. The preconcentration of As(III) was tested by coprecipitation with two different inorganic coprecipitating agents namely La(III) and Hf(IV). It was shown that As(III) is more effectively collected by lanthanum hydroxide than by hafnium hydroxide, the sensitivity achieved by the former being approximately 25% better. With optimal experimental conditions and with a sample consumption of 6.7 ml per assay, an enrichment factor of 32 was obtained at a sample frequency of 33 samples h(-1). The limit of detection (3sigma) was 0.003 microg 1(-1) and the precision (relative standard deviation) was 1.0% (n = 11) at the 0.1 microg 1(-1) level.     

Efficient synthesis of 2,2-diaryl-1,1-difluoroethenes via consecutive cross-coupling reactions of 2,2-difluoro-1-tributylstannylethenyl p-toluenesulfonate

2,2-Difluoro-1-tributylstannylethenyl p-toluenesulfonate (2) was reacted with aryl iodides in the presence of 10 mol % of Pd(PPh(3))(4) and 10 mol % of CuI in DMF at 80 °C for 10-20 h to give the cross-coupled products 3 in 35-97% yields. Further coupling reaction of 3 with arylstannanes in the presence of 5 mol % of Pd(PPh(3))(4) and 3 equiv of LiBr in DMF at 100 °C for 2-24 h afforded the desired products 5 in 25-78% yields.     

Metal-free catalytic C-Si bond formation in an aqueous medium. Enantioselective NHC-catalyzed silyl conjugate additions to cyclic and acyclic α,β-unsaturated carbonyls

A metal-free method for enantioselective conjugate addition of a dimethylphenylsilyl group to α,β-unsaturated carbonyls is reported. Transformations are catalyzed by a chiral N-heterocyclic carbene (NHC), performed in an aqueous solution (3:1 mixture of water and tetrahydrofuran) and are operationally simpler to perform than the NHC-Cu-catalyzed variant. The chiral catalyst is generated from an enantiomerically pure imidazolinium salt (prepared in three steps) and a common organic amine base (dbu). NHC-catalyzed processes proceed with 5.0-12.5 mol % catalyst loading at 22 °C within 1-12 h, affording the desired β-silyl carbonyls in 85:15 to >98:2 enantiomeric ratio and in 50% to >98% yield. Cyclic enones or lactones and acyclic α,β-unsaturated ketones, esters, and aldehydes can be used as substrates.     

Rotational spectrum of 1,1,1-trifluoro-2-butanone using chirped-pulse Fourier transform microwave spectroscopy

The pure rotational spectra of 1,1,1-trifluoro-2-butanone and its four (13)C isotopologues have been studied using the new chirped-pulsed Fourier transform microwave spectrometer at the University of Manitoba in combination with a conventional Balle-Flygare-type instrument. Quantum chemical calculations, at the MP2/6-311++G(d,p) level, were carried out to obtain information about the structure, relative stability, and difference in populations of the three lowest energy conformers corresponding to dihedral angles of 0°, 82.8°, and 119.2° along the carbon backbone. The observed spectra are that of conformer I (dihedral angle 0°), and, based on analysis of the observed splitting, the V(3) barrier to internal rotation of the methyl group has been determined to be 9.380(5) kJ mol(-1). The spectroscopic constants of the five isotopologues were used to precisely derive the r(s) and partial r(0) geometries of this conformer based on an assumed planar carbon backbone (as supported by the spectra and ab initio calculations).     

A palladium iodide-catalyzed carbonylative approach to functionalized pyrrole derivatives

A novel and convenient approach to functionalized pyrroles is presented, based on Pd-catalyzed oxidative heterocyclization-alkoxycarbonylation of readily available N-Boc-1-amino-3-yn-2-ols. Reactions were carried out in alcoholic solvents at 80-100 °C and under 20 atm (at 25 °C) of a 4:1 mixture of CO-air, in the presence of the PdI(2)-KI catalytic system (2-5 mol % of PdI(2), KI/PdI(2) molar ratio = 10). In the case of N-Boc-1-amino-3-yn-2-ols 3, bearing alkyl or aryl substituents, the carbonylation reaction led to a mixture of Boc-protected and N-unsubstituted pyrrole-3-carboxylic esters 4 and 5, respectively. This mixture could be conveniently and quantitatively converted into deprotected pyrrole-3-carboxylic esters 5 by a simple basic treatment. In the case of diastereomeric (3RS,4RS)- and (3RS,4SR)-N-Boc-3-amino-2-methyldec-5-yn-4-ol (syn-3f and anti-3f, respectively, whose relative configuration was determined by X-ray crystallographic analysis), no particular difference was observed in the reactivity of the two diastereomers between them and with respect to the diastereomeric mixture (3S,4S) + (3S,4R). Interestingly, N-Boc-2-alkynyl-1-amino-3-yn-2-ols 6, bearing an additional alkynyl substituent α to the hydroxyl group, spontaneously underwent N-deprotection under the reaction conditions and regioselective water addition to the alkynyl group at C-3 of the corresponding pyrrole-3-carboxylic ester derivative, thus directly affording highly functionalized pyrrole derivatives 7 in one step. In a similar manner, a novel functionalized dihydropyrrolizine derivative 9 was directly synthesized starting from (S)-7-(pyrrolidin-2-yl)trideca-5,8-diyn-7-ol 8.     

非水相中微生物脂肪酶催化转酯化拆分(R,S)-α-苯乙醇

研究了非水有机溶剂体系中脂肪酶不对称转酯化拆分(R,S)-α-苯乙醇反应,比较了15种不同微生物来源的脂肪酶,从中优选出催化活性及对映选择性较高的脂肪酶Lipase PS,系统考察了影响该酶催化不对称转酯化反应的关键因素,获得了优化的催化拆分工艺条件.结果表明,脂肪酶Lipase PS在非水反应体系中,以正己烷为反应介...     

多频超声反应槽连续强化酸化油酯交换制备生物柴油研究

以平均酸值高达33.07 mgKOH/g不可食用的廉价酸化油为原料,利用自行设计的多频超声溢流槽连续强化酯交换反应生物柴油生产装置,先后经预酯化、酯交换两步反应,高效、低耗的制备生物柴油。主要考察了室温下物料流量(停留时间)、超声功率、超声频率及组合、KOH用量、醇油物质的量比对酯交换反应的影响及单位产品能耗。结果表明,多频组合超声辐射比单频更有利于生物柴油的制备;预酯化后的油料在流量为25 L/h(物料停留时间为54 min),催化剂(KOH)用量为1.2%(质量分数),醇油物质的量比为6∶1和各反应槽功率为200 W的条件下,甲酯产率达96.83%。50 L废弃酸化油能制得符合国标GB19147—2009的生物柴油48L,整个生物柴油制备过程总耗时和总耗电量仅为8.667 h、5.42 kWh。