Energy-adjusted pseudopotentials for the rare earth elements

Nonrelativistic and quasirelativistic energy-adjusted pseudopotentials and optimized (7s6p5d)/[5s4p3d]-GTO valence basis sets for use in molecular calculations for fixed f-subconfigurations of the rare earth elements, La through Lu, have been generated. Atomic excitation and ionization energies from numerical HF, as well as SCF pseudopotential calculations using the derived basis sets, differ by less than 0.1 eV from numerical HF all-electron results. Corresponding values obtained from CI(SD), CEPA-1, as well as density functional calculations using the quasirelativistic pseudopotentials, are in reasonable agreement with experimental data.     

Ab initio study of hydrogen bonding in the phenol–water system

Three hydrogen-bonded minima on the phenol-water, C₆H₅OH—H₂O, potential energy surface were located with 3–21G and 6–31G** basis sets at both Hartree–Fock and MP2 levels of theory. MP2 binding energies were computed using large “correlation consistent” basis sets that included extra diffuse functions on all atoms. An estimate of the effect of expanding the basis set to the triple-zeta level (multiple f functions on carbon and oxygen and multiple d functions on hydrogen) was derived from calculations on a related prototype system. The best estimates of the electronic binding energies for the three minima are –7.8, –5.0, and –2.0 kcal/mol. The consequences of uncertainties in the geometries and limitations in the level of correlation recovery are analyzed. It is suggested that our best estimates will likely underestimate the complete basis set, full CI values by 0.1–0.3 kcal/mol. Vibrational normal modes were determined for all three minima, including an MP2/6–31G** analysis for the most strongly bound complex. Computational strategies for larger phenol–water complexes are discussed. © John Wiley & Sons, Inc.     

Basis sets for geometry optimizations of second-row transition metal inorganic and organometallic complexes

Modest-sized basis sets for the second-row transition metal atoms are developed for use in geometry optimization calculations. Our method is patterned after previous work on basis sets for first-row transition metal atoms. The basis sets are constructed from the minimal basis sets of Huzinaga and are augmented with a set of diffuse p and d functions. The exponents of these diffuse functions are chosen to minimize both the difference between the calculated and experimental equilibrium geometries and the total molecular energies for several second-row transition metal inorganic and organon etallic complexes. Slightly smaller basis sets, based on the same Huzinaga minimal sets but augmented with a set of diffuse s and p functions rather than diffuse p and d functions, are also presented. The performance of these basis sets is tested on a wide variety of second-row transition metal inorganic and organometallic complexes and is compared to pseudopotential basis sets incorporating effective core potentials.     

Contracted Gaussian-type basis functions revisited. IV. Atoms Rb to Xe

We report minimal-type contracted Gaussian-type function (GTF) sets, #n=(n3333/n33/n3) with n=5 and 6, #7= (74333/743/74), and #8= (84333/843/75), for the fourth-row atoms from Rb to Xe. Test calculations are performed on the Ag₂ molecule. Spectroscopic constants given by split valence sets derived from #5 and #6 are a little contaminated by basis set superposition error. However, we find that the fully valence split #8 set, (8433111/84111/711111), yields essentially the same results as a large GTF set, (22s15p12d), with a general contraction, when p-, d-, and f-type polarization functions are augmented. The present #7 and #8 CGTF sets are recommended for ab initio molecular calculations including fourth-row atoms. Received: 15 January 2002 / Accepted: 16 April 2002 / Published online: 24 June 2002     

Contracted Gaussian-type basis functions revisited. III. Atoms K through Kr

Six minimal basis sets of contracted Gaussian-type functions (GTFs) are developed for the third-row atoms K through Kr. The smallest and largest sets for transition metal atoms are (3333/33/3) and (8433/84/8), respectively, where a slash distinguishes the s, p, and d symmetries and single-digit figures in the parentheses denote the numbers of primitive GTFs. The two largest sets, (7433/74/7) and (8433/84/8), surpass the (62111111/33111/311) set of Schaefer et al. in the associated total energies. Our (8433/84/8) set is also superior to their (842111/631/411) set. The quality of the present basis sets is tested by self-consistent field (SCF) and configuration interaction (CI) calculations on the Cu₂ molecule. As the accuracy of the basis set increases, SCF calculations show a decrease in the dissociation energy and an increase in the equilibrium internuclear distance. The same tendencies are found in the results of CI calculations with and without a Davidson correction. All the present basis sets are freely available at the internet address: http://202.35.198.41/∼htatewak/. Received: 17 June 1998 / Accepted: 4 August 1998 / Published online: 23 November 1998     

Reliability of atomic natural orbital basis sets in calculations involving pseudopotentials

The performance of Atomic Natural Orbital (ANO) basis sets for calculations involving nonempirical core pseudopotentials has been studied by comparing the results for atomic and molecular nitrogen obtained using contracted ANO basis sets with those obtained using both the primitive set and a segmented one. The primitive set has been optimized at the SCF level for atomic N treated as a five-electron pseudo-atom, and consists of 7s and 7p primitive GTOs supplemented by 2d and 1f GTOs optimized at the CI level. From this primitive set three contracted [3s 3p 2d 1f] sets have been obtained. The first one has been derived from the ANOs of the neutral atom, the second has been obtained from an averaged density matrix and the third one is a segmented set. For the atom, the segmented set gives a zero contraction error at the SCF level as it must be in valence-only calculations. The ANO basis sets show some small contraction error at the SCF level but perform better in CI calculations. However, for the diatomic N₂ molecule the ANO basis sets exhibit a rather large contraction error in the calculated SCF energy. A detailed analysis of the origin of this error is reported, which shows that the conventional strategy used to derive ANO basis sets does not work very well when pseudopotentials are involved.     

Combined bond-polarization basis sets for accurate determination of dissociation energies. II. Basis set superposition error as a function of the parent basis set

The effect of the parent basis set on the basis set superposition error caused by bond functions is investigated systematically. An important difference between BSSE at the SCF and correlated levels is pointed out. Three new basis sets are defined, denoted 6-311 + G(d,p)B, 6-311 + G(2d,p)B, and 6-311 + G(2df,p)B. BSSE for the first-row hydrides seems to increase uniformly with increasing atomic number of the central atom. Expansion of the valence part of the basis set from 6-31G to 6-311G, as well as adding f functions, has a significant effect on the BSSE. Additional BSSEs incurred by bond functions are less than or equal to 1 kcal/mol for the 6-311 + G(2df,p)B basis set. For the dissociation energies of the first-row hydride species, agreement with experiment within only a few kcal/mol can be obtained even without resorting to isogyric reaction cycles. For high-quality calculations, adding bond functions seems to have definite advantages over expanding the polarization space beyond the [2d1f] level.     

Density matrix averaged atomic natural orbital (ANO) basis sets for correlated molecular wave functions

Summary Generally contracted basis sets for first row atoms have been constructed using the Atomic Natural Orbital (ANO) approach, with modifications for allowing symmetry breaking and state averaging. The ANOs are constructed by averaging over several atomic states, positive and negative ions, and atoms in an external electric field. The contracted basis sets give virtually identical results as the corresponding uncontracted sets for the atomic properties, which they have been designed to reproduce. The design objective has been to describe the ionization potential, the electron affinity, and the polarizability as accurately as possible. The result is a set of well-balanced basis sets for molecular calculations. The starting primitive sets are 8s4p3d for hydrogen, 9s4p3d for helium, and 14s9p4d3f for the heavier first row atoms.     

Density matrix averaged atomic natural orbital (ANO) basis sets for correlated molecular wave functions

Summary Generally contracted basis sets for second row atoms have been constructed using the Atomic Natural Orbital (ANO) approach, with modifications for allowing symmetry breaking and state averaging. The ANOs are constructed by averaging over several atomic states, positive and negative ions, and atoms in an external electric field. The contracted basis sets give virtually identical results as the corresponding uncontracted sets for the atomic properties, which they have been designed to reproduce. The design objective has been to describe the ionization potential, the electron affinity, and the polarizability as accurately as possible. The result is a set of well balanced basis sets for molecular calculations. The starting primitive sets are 17s12p5d4f for the second row atoms Na-Ar. Corresponding ANO basis sets for first row atoms have recently been published.     

The energetic effects of p,d, and f Gaussian polarization functions on closed-shell AHn oxygen and sulfur hydrides

A series of LCAO -MO -SCF calculations, using various basis sets of Gaussian-type functions, has been made in order to study the effects of p, d, and f polarization functions for a 10-electron isoelectronic series of oxygen hydrides and for an 18-electron isoelectronic series of sulfur hydrides. Conclusions from these results suggest that meaningful proton affinities cannot be calculated without the inclusion of a d function on the heavy atom and a p function on the hydrogen atoms.     

Compact contracted Gaussian-type basis sets for halogen atoms. Basis-set superposition effects on molecular properties

Compact, contracted Gaussian basis sets for halogen atoms are generated and tested in ab initio molecular calculations. These basis sets have similar structure to that of Huzinaga and co-workers' (HTS ) sets; however, they give both better atomic total energies and better properties of atomic valence orbitals. These sets, after splitting of valence orbitals and augmenting with polarization functions, provide molecular results that agree well with those given by extended calculations. Basis set superposition error (BSSE ) is calculated using the counterpoise method. BSSE has only slight influence on calculated equilibrium geometry, shape of potential curve, and electric properties (dipole and quadrupole moments) of molecules. However, atomization energies may be significantly changed by the BSSE .     

Basis set quality versus size II. Approximate GTO wave functions for second row transition metal atoms

Basis sets ranging in size from (16, 10, 7) to (20, 14, 11) have been derived for the atoms Y–Cd. Separate sets represent the energy optimized wave functions for each of the s²dⁿ, s¹dⁿ⁺¹, and s⁰dⁿ⁺² configurations. The energies from the largest sets are within 3 mhartrees of the values obtained in numerical Hartree–Fock calculations. Reasonable Hartree–Fock s²dⁿ– s¹dⁿ⁺¹ and s²dⁿ– s⁰dⁿ⁺² excitation energies may be obtained either using the largest basis sets, or using d-orbitals optimized for the s⁰dⁿ⁺² configurations. The basis sets are slightly unbalanced in favor of the s-functions and in disfavor of the d-functions, but various alternative basis sets may be derived by combining parts of the five parent sets. The convergence of radial expectation values is discussed.     

Supplementary d and f functions in molecular wave functions: Optimum and nonoptimum exponents

Energy optimization calculations have been carried out to determine the variability of optimum p, d, and f polarization function exponents in molecules containing first- and second-row elements and in normal valency and hypercoordinate species. Optimum exponents were determined for single sets of higher-order functions at both Hartree–Fock and correlated (Moller–Plesset) levels of theory using the Dunning–Hay double zeta and the McLean–Chandler triple zeta basis sets. More detailed calculations were used to test the response to nonoptimum d and f function exponents of the total energy, the optimum geometry, and harmonic stretching frequencies. The variability in optimum exponents and the size of the energy penalties incurred by adopting nonoptimum values reduces the utility of standard exponents for p, d, and f polarization functions. © 1993 John Wiley & Sons, Inc.     

Compact and efficient basis sets of s- and p-block elements for model core potential method

We propose compact and efficient valence-function sets for s- and p-block elements from Li to Rn to appropriately describe valence correlation in model core potential (MCP) calculations. The basis sets are generated by a combination of split MCP valence orbitals and correlating contracted Gaussian-type functions in a segmented form. We provide three types of basis sets. They are referred to as MCP-dzp, MCP-tzp, and MCP-qzp, since they have the quality comparable with all-electron correlation consistent basis sets, cc-pVDZ, cc-pVTZ, and cc-pVQZ, respectively, for lighter atoms. MCP calculations with the present basis sets give atomic correlation energies in good agreement with all-electron calculations. The present MCP basis sets systematically improve physical properties in atomic and molecular systems in a series of MCP-dzp, MCP-tzp, and MCP-qzp. Ionization potentials and electron affinities of halogen atoms as well as molecular spectroscopic constants calculated by the best MCP set are in good agreement with experimental values.     

Density matrix averaged atomic natural orbital (ANO) basis sets for correlated molecular wave functions

Generally contracted basis sets for the first row transition metal atoms Sc-Zn have been constructed using the atomic natural orbital (ANO) approach, with modifications for allowing symmetry breaking and state averaging. The ANOs are constructed by averaging over the three electronic configurationsd ⁿ ,d ^n–1 s, andd ^n–2 s ² for the neutral atom as well as the ground state for the cation and the ground state atom in an external electric field. The primitive sets are 21s15p10d6f4g. Contraction to 6s5p4d3f2g yields results that are virtually identical to those obtained with the corresponding uncontracted basis sets for the atomic properties, which they have been designed to reproduce. Slightly larger deviations are obtained with the 5s4p3d2f1g for the polarizability, while energetic properties still have only small errors. The design objective has been to describe the ionization potential, the polarizability and the valence spectrum as accurately as possible. The result is a set of well-balanced basis sets for molecular calculations, which can be used together with basis sets of the same quality for the first and second row atoms.     

Energy-adjustedab initio pseudopotentials for the second and third row transition elements

Summary Nonrelativistic and quasirelativisticab initio pseudopotentials substituting the M^(Z–28)+-core orbitals of the second row transition elements and the M^(Z–60)+-core orbitals of the third row transition elements, respectively, and optimized (8s7p6d)/[6s5p3d]-GTO valence basis sets for use in molecular calculations have been generated. Additionally, corresponding spin-orbit operators have also been derived. Atomic excitation and ionization energies from numerical HF as well as from SCF pseudopotential calculations using the derived basis sets differ in most cases by less than 0.1 eV from corresponding numerical all-electron results. Spin-orbit splittings for lowlying states are in reasonable agreement with corresponding all-electron Dirac-Fock (DF) results.