Direct observation of the primary and secondary C-Br bond cleavages from the 1,2-dibromopropane photodissociation at 234 and 265 nm using the velocity map ion imaging technique

Photodissociation dynamics of 1,2-dibromopropane has been investigated at 234 and 265 nm by using the velocity map ion imaging method. At both pump energies, a single Gaussian-shaped speed distribution is observed for the Br*((2)P(1/2)) fragment, whereas at least three velocity components are found to be existent for the Br((2)P(3/2)) product. The secondary C-Br bond cleavage of the bromopropyl radical which is energized from the ultrafast primary C-Br bond rupture should be responsible for the multicomponent translational energy distribution at the low kinetic energy region of Br((2)P(3/2)). The recoil anisotropy parameter (beta) of the fragment from the primary C-Br bond dissociation is measured to be 0.53 (0.49) and 1.26 (1.73) for Br((2)P(3/2)) and Br*((2)P(1/2)), respectively, at 234 (265) nm. The beta value of Br((2)P(3/2)) from the secondary C-Br bond dissociation event at 265 nm is found to be 0.87, reflecting the fact that the corresponding Br((2)P(3/2)) fragment carried the initial vector component of the bromopropyl radical produced from the primary bond dissociation event. Density functional theory has been used to calculate energetics involved both in the primary and in the secondary C-Br bond dissociation dynamics.     

Photodissociation dynamics of CH(2)Br(2) near 234 and 267 nm

The photodissociation dynamics of CH(2)Br(2) was investigated near 234 and 267 nm. A two-dimensional photofragment ion velocity imaging technique coupled with a [2+1] resonance-enhanced multiphoton (REMPI) ionization scheme was utilized to obtain the angular and translational energy distributions of the nascent Br ((2)P(3/2)) and Br* ((2)P(1/2)) atoms. The obtained translational energy distributions of Br and Br* are found consist of two components which should be come from the radical channel and secondary dissociation process, respectively. It is suggested that the symmetry reduction from C(2v) to C(s) during photodissociation invokes a non-adiabatic coupling between the 2B(1) and A(1) states. Consequently, the higher internal energy distribution of Br channel than Br* formation channel and the broader translational energy distribution of the former are presumed correlate with a variety of vibrational excitation disposal at the crossing point resulting from the larger non-adiabatic crossing from 2B(1) to A(1) state than the reverse crossing. Moreover, the measured anisotropy parameter beta indicate that fragments recoil along the Br-Br direction mostly in the photodissociation.     

Laser-induced UV photodissociation of 2-bromo-2-nitropropane: dynamics of OH and Br formation

Photoexcitation of 2-bromo-2-nitropropane (BNP) at 248 and 193 nm generates OH, Br, and NO(2) among other products. The OH fragment is detected by laser-induced fluorescence spectroscopy, and its translational and internal state distributions (vibration, rotation, spin-orbit, and Λ-doubling components) are probed. At both 248 and 193 nm, the OH fragment is produced translationally hot with the energy of 10.8 and 17.2 kcal∕mol, respectively. It is produced vibrationally cold (v" = 0) at 248 nm, and excited (v" = 1) at 193 nm with a vibrational temperature of 1870 ± 150 K. It is also generated with rotational excitation, rotational populations of OH(v" = 0) being characterized by a temperature of 550 ± 50 and 925 ± 100 K at 248 and 193 nm excitation of BNP, respectively. The spin-orbit components of OH(X(2)Π) are not in equilibrium on excitation at 193 nm, but the Λ-doublets are almost in equilibrium, implying no preference for its π lobe with respect to the plane of rotation. The NO(2) product is produced electronically excited, as detected by measuring UV-visible fluorescence, at 193 nm and mostly in the ground electronic state at 248 nm. The Br product is detected employing resonance-enhanced multiphoton ionization with time-of-flight mass spectrometer for better understanding of the dynamics of dissociation. The forward convolution analysis of the experimental data has provided translational energy distributions and anisotropy parameters for both Br((2)P(3∕2)) and Br?((2)P(1∕2)). The average translational energies for the Br and Br? channels are 5.0 ± 1.0 and 6.0 ± 1.5 kcal∕mol. No recoil anisotropies were observed for these products. Most plausible mechanisms of OH and Br formation are discussed based on both the experimental and the theoretical results. Results suggest that the electronically excited BNP molecules at 248 and 234 nm relax to the ground state, and subsequently dissociate to produce OH and Br through different channels. The mechanism of OH formation from BNP on excitation at 193 nm is also discussed.     

Dynamics of Cl (2Pj) atom formation in the photodissociation of fumaryl chloride (ClCO - CH = CH - COCl) at 235 nm: a resonance enhanced multiphoton ionization (REMPI) time-of-flight (TOF) study

The photodissociation dynamics of fumaryl chloride (ClCO-CH═CH-COCl) has been studied in a supersonic molecular beam around 235 nm using resonance enhanced multiphoton ionization (REMPI) time-of-flight (TOF) technique by detecting the nascent state of the primary chlorine atom. A single laser has been used for excitation of fumaryl chloride and the REMPI detection of chlorine atoms in their spin-orbit states, Cl ((2)P(3/2)) and Cl* ((2)P(1/2)). We have determined the translational energy distribution, the recoil anisotropy parameter, β, and the spin-orbit branching ratio for chlorine atom elimination channels. To obtain these, measured polarization-dependent and state-specific TOF profiles are converted into kinetic energy distributions, using a least-squares fitting method, taking into account the fragment recoil anisotropies, β(i). The TOF profiles for both Cl and Cl* are found to be independent of laser polarization; i.e., β is well characterized by a value of 0.0, within the experimental uncertainties. Two components, namely, the fast and the slow, are observed in the translational energy distribution, P(E(T)), of Cl and Cl* atoms, and assigned to be formed from different potential energy surfaces. The average translational energies for the fast components of the Cl and Cl* channels are 14.9 ± 1.6 and 16.8 ± 1.6 kcal/mol, respectively. Similarly, for the slow components, the average translational energies of the Cl and Cl* channels are 3.4 ± 0.8 and 3.1 ± 0.8 kcal/mol, respectively. The energy partitioning into the translational modes is interpreted with the help of various models, such as impulsive and statistical models. Apart from the chlorine atom elimination channel, molecular hydrogen chloride (HCl) elimination is also observed in the photodissociation process. The HCl product has been detected, using a REMPI scheme in the region of 236-237 nm. The observation of the molecular HCl in the dissociation process highlights the importance of the relaxation process, in which the initially excited parent molecule relaxes to the ground state from where the molecular (HCl) elimination takes place.     

A concerted three-body formation X+Y+C2H4 in the photodissociation of CH2XCH2Y (X,Y=Br,Cl) at 193 nm

The photodissociation of CH2XCH2Y (X,Y=Br,Cl) through absorption of 193 nm photons was investigated using product translational spectroscopy. No stable CH2BrCH2 or CH2ClCH2 was detected. The recorded time-of-flight spectra indicate that these internally excited radicals dissociated into Y+C2H4 in a concerted reaction with the first C-X bond rupture. Product anisotropy implies that the overall reaction time for three-body formation is in a fraction of rotational period. According to an asynchronous concerted reaction model, the measured spectra were simulated with product translational energy distributions coupled by asymmetric angular distributions. For the mixed halide, CH2BrCH2Cl, triple products Br+Cl+C2H4 can be originated from the cleavage of either the C-Br bond or the C-Cl bond. The results are discussed and where appropriate, comparisons with previous investigations of the related molecules are included.     

正丙醇和异丙醇的紫外光解动力学

利用高里德堡态氢原子飞行时间(HRTOF)探测技术,研究了正丙醇和异丙醇的紫外光解动力学过程.在193.3 nm光辐射下,O-H键快速断裂过程构成主要的氢原子生成通道.伴随O-H键的碎裂,相当大的一部分能量转换成氢原子及其相应碎片的平动能(正丙醇〈fv〉=0.76; 异丙醇〈fv〉=0.78).氢原子碎片具有各向异性的角度分布;其角分布异向因子β分别为-0.79(正丙醇)和-0.77(异丙醇).研究结果表明,吸收1个193.3 nm光子后,丙醇分子跃迁到一个寿命很短的电子激发态;沿着O-H反应坐标,该激发态势能面是排斥的,因而O-H键快速断裂.此外,还得到了丙醇的O-H键离解能: (432±2)kJ/mol(正丙醇)和(433±2)kJ/mol(异丙醇).     

The dynamics of Br(2Pj) formation in the photodissociation of vinyl and perfluorovinyl bromides

The photodissociation dynamics of vinyl bromide and perfluorovinyl bromide have been investigated at 234 nm using a photofragment ion imaging technique coupled with a state-selective [2+1] resonance-enhanced multiphoton ionization scheme. The nascent Br atoms stem from the primary C-Br bond dissociation leading to the formation of C2H3(X) and Br(2Pj;j=1/2,3/2). The obtained translational energy distributions have been well fitted by a single Boltzmann and three Gaussian functions. Boltzmann component has not been observed in the perfluorovinyl bromide. The repulsive 3A'(n,sigma *) state has been considered as the origin of the highest Gaussian components. Middle translational energy components with Gaussian shapes are produced from the 1A"(pi,sigma*) and/or 3A"(pi,sigma*) which are very close in energy. Low-energy Gaussian components are produced via predissociation from the 3A'(pi,pi*) state. The assignments have also been supported by the recoil anisotropy corresponding to the individual components. It is suggested that intersystem crossing from the triplet states to the ground state has been attributed to the Boltzmann component and the fluorination reduces the probability of this electronic relaxation process.     

Multiphoton dissociative ionization of tert-pentyl bromide near 265 nm

We report on the photodissociation dynamics of tert-pentyl bromide near 265 nm investigated by time-sliced velocity map imaging. The speed and angular distributions have been analyzed for both the ground-state Br((2)P(3∕2)) atom (denoted Br) and the spin-orbit excited-state Br((2)P(1∕2)) atom (denoted Br*). The speed distributions of Br and Br* atoms are all found to consist of three Gaussian components, which correlate to three independent dissociation pathways on the excited potential energy surfaces: (1) the high translational energy (E(T)) component from the prompt dissociation along the C-Br stretching mode, (2) the middle E(T) component from the repulsive mode along the C-Br stretching coupled with some bending motions, and (3) the low E(T) component from the repulsive mode along the C-Br stretching coupled with more bending motions. More interestingly, we have also observed the tert-C(5)H(11)(+) ions in 263-267 nm. The near-zero kinetic energy distributions extracted from the three tert-C(5)H(11)(+) images near 265 nm show the typical characteristics that are attributable to multiphoton dissociative ionization, suggesting the existence of a neutral superexcited state of the parent tert-pentyl bromide molecule. The contribution of bromine atoms formed in this dissociative ionization channel adds in the total relative distribution of low E(T) component in the Br*(Br) formation channel, which reasonably explains the abnormal distributions observed in between the middle and low E(T) components in the Br*(Br) formation channel.     

Photodissociation dynamics of bromofluorobenzenes using velocity imaging technique

Velocity imaging technique combined with (2 + 1) resonance-enhanced multiphoton ionization (REMPI) has been used to detect the Br fragment in photodissociation of o-, m-, and p-bromofluorobenzene at 266 nm. The branching ratio of ground state Br(2P3/2) is found to be larger than 96%. Its translational energy distributions suggest that the Br fragments are generated via two dissociation channels for all the molecules. The fast route, which is missing in p-bromofluorobenzene detected previously by femtosecond laser spectroscopy, giving rise to an anisotropy parameter of 0.50-0.65, is attributed to a direct dissociation from a repulsive triplet T1(A' ') or T1(B1) state. The slow one with anisotropy parameter close to zero is proposed to stem from excitation of the lowest excited singlet (pi,pi*)state followed by predissociation along a repulsive triplet (pi,sigma*) state localized on the C-Br bond. For the minor product of spin-orbit excited state Br(2P1/2), the dissociating features are similar to those found in Br(2P3/2). Our kinetic and anisotropic features of decomposition obtained in m- and p-bromofluorobenzene are opposed to those by photofragment translational spectroscopy. Discrepancy between different methods is discussed in detail.     

Quantum state-to-state dynamics for the quenching process of Br(2P1/2) + H2(v(i) = 0, 1, j(i) = 0)

Quantum state-to-state dynamics for the quenching process Br((2)P(1/2)) + H(2)(v(i) = 0, 1, j(i) = 0) → Br((2)P(3/2)) + H(2)(v(f), j(f)) has been studied based on two-state model on the recent coupled potential energy surfaces. It was found that the quenching probabilities have some oscillatory structures due to the interference of reflected flux in the Br((2)P(1/2)) + H(2) and Br((2)P(3/2)) + H(2) channels by repulsive potential in the near-resonant electronic-to-vibrational energy transfer process. The final vibrational state resolved integral cross sections were found to be dominated by the quenching process Br((2)P(1/2)) + H(2)(v) → Br((2)P(3/2)) + H(2)(v+1) and the nonadiabatic reaction probabilities for Br((2)P(1/2)) + H(2)(v = 0, 1, j(i) = 0) are quite small, which are consistent with previous theoretical and experimental results. Our calculated total quenching rate constant for Br((2)P(1/2)) + H(2)(v(i) = 0, j(i) = 0) at room temperature is in good agreement with the available experimental data.     

Two- and three-body photodissociation dynamics of diiodobromide (I2Br-) anion

The photodissociation of gas-phase I(2)Br(-) was investigated using fast beam photofragment translational spectroscopy. Anions were photodissociated from 300 to 270 nm (4.13-4.59 eV) and the recoiling photofragments were detected in coincidence by a time- and position-sensitive detector. Both two- and three-body channels were observed throughout the energy range probed. Analysis of the two-body dissociation showed evidence for four distinct channels: Br(-) + I(2), I(-) + IBr, Br+I(2) (-), and I + IBr(-). In three-body dissociation, Br((2)P(3∕2)) + I((2)P(3∕2)) + I(-) and Br(-) + I((2)P(3∕2)) + I((2)P(3∕2)) were produced primarily from a concerted decay mechanism. A sequential decay mechanism was also observed and attributed to Br(-)((1)S)+I(2)(B(3)Π(0u) (+)) followed by predissociation of I(2)(B).     

Ultrafast strong-field dissociative ionization dynamics of CH2Br2 probed by femtosecond soft x-ray transient absorption spectroscopy

Femtosecond time-resolved soft x-ray transient absorption spectroscopy based on a high-order harmonic generation source is used to investigate the dissociative ionization of CH(2)Br(2) induced by 800 nm strong-field irradiation. At moderate laser peak intensities (2.0 x 10(14) Wcm(2)), strong-field ionization is accompanied by ultrafast C-Br bond dissociation, producing both neutral Br ((2)P(32)) and Br(*) ((2)P(12)) atoms together with the CH(2)Br(+) fragment ion. The measured rise times for Br and Br(*) are 130+/-22 fs and 74+/-10 fs, respectively. The atomic bromine quantum state distribution shows that the BrBr(*) population ratio is 8.1+/-3.8 and that the Br (2)P(32) state is not aligned. The observed product distribution and the time scales of the photofragment appearances suggest that multiple field-dressed potential energy surfaces are involved in the dissociative ionization process. At higher laser peak intensities (6.2 x 10(14) Wcm(2)), CH(2)Br(2) (+) undergoes sequential ionization to form the metastable CH(2)Br(2) (2+) dication. These results demonstrate the potential of core-level probing with high-order harmonic transient absorption spectroscopy for studying ultrafast molecular dynamics.     

Br(2Pj) atom formation dynamics in ultraviolet photodissociation of tert-butyl bromide and iso-butyl bromide

The photodissociation dynamics of tert-C(4)H(9)Br and iso-C(4)H(9)Br has been studied at 234 and 265 nm using two-dimensional velocity map imaging technique. The translational energy and angular distributions have been analyzed for Br, Br(*), and tert-C(4)H(9) radical. The energy distribution of Br atom in the photodissociation of tert-C(4)H(9)Br is found to consist of two Gaussian components. The two components are correlated to two independent reaction paths on the excited potential energy surfaces: (1) the high-energy component from the prompt dissociation along the C-Br stretching mode and (2) the low-energy component from the repulsive mode along the C-Br stretching, coupled with some bending motions. For the energy distribution of Br(*) atom in the photodissociation of tert-C(4)H(9)Br, a third multiphoton dissociative ionization channel is observed at 265 nm in addition to the two energy components corresponding to channels (1) and (2). The energy distributions of Br and Br(*) atoms in the photodissociation of iso-C(4)H(9)Br can be fitted using only one Gaussian function indicating a single formation channel. Relative quantum yields for Br((2)P(32)) at 234 and 265 nm in the photodissociation of tert-C(4)H(9)Br are measured to be 0.76 and 0.65, respectively. For iso-C(4)H(9)Br, the measured value is Phi(234 nm)(Br)=0.81. The contribution of bending modes to Br and Br(*) is much more obvious in the photodissociation of tert-C(4)H(9)Br than in iso-C(4)H(9)Br.     

Photodissociation dynamics of N2O at 130 nm: the N2(A 3Sigmau +,B 3Pig)+O(3PJ = 2,1,0) channels

Oxygen Rydberg time-of-flight spectroscopy was used to study the vacuum ultraviolet photodissociation dynamics of N(2)O near 130 nm. The O((3)P(J)) products were tagged by excitation to high-n Rydberg levels and subsequently field ionized at a detector. In agreement with previous work, we find that O((3)P(J)) formation following excitation to the repulsive N(2)O D((1)Sigma(+)) state produces the first two electronically excited states of the N(2) counterfragment, N(2)(A (3)Sigma(u) (+)) and N(2)(B (3)Pi(g)). The O((3)P(J)) translational energy distribution reveals that the overall branching ratio between N(2)(A (3)Sigma(u) (+)) and N(2)(B (3)Pi(g)) formation is approximately 1.0:1.0 for J = 1 and 2, with slightly less N(2)(B (3)Pi(g)) produced in coincidence with O((3)P(0)). The angular distributions were found to be independent of J and highly anisotropic, with beta = 1.5+/-0.2.     

Photolysis of (3-methyl-2H-azirin-2-yl)-phenylmethanone: direct detection of a triplet vinylnitrene intermediate

The photoreactivity of (3-methyl-2H-azirin-2-yl)-phenylmethanone, 1, is wavelength-dependent (Singh et al. J. Am. Chem. Soc. 1972, 94, 1199-1206). Irradiation at short wavelengths yields 2P, whereas longer wavelengths produce 3P. Laser flash photolysis of 1 in acetonitrile using a 355 nm laser forms its triplet ketone (T(1K), broad absorption with λ(max) ~ 390-410 nm, τ ~ 90 ns), which cleaves and yields triplet vinylnitrene 3 (broad absorption with λ(max) ~ 380-400 nm, τ = 2 μs). Calculations (B3LYP/6-31+G(d)) reveal that T(1K) of 1 is located 67 kcal/mol above its ground state (S(0)) and has a long C-N bond (1.58 ?), and the calculated transition state to form 3 is only 1 kcal/mol higher in energy than T(1K) of 1. The calculations show that 3 has significant 1,3-carbon iminyl biradical character, which explains why 3 reacts efficiently with oxygen and decays by intersystem crossing to the singlet surface. Photolysis of 1 in argon matrixes at 14 K produced ketene imine 7, which presumably is formed from 3 intersystem crossing to 7. In comparison, photolysis of 1 in methanol with a 266 nm laser produces mainly ylide 2 (λ(max) ~ 380 nm, τ ~ 6 μs, acetonitrile), which decays to form 2P. Ylide 2 is formed via singlet reactivity of 1, and calculations show that the first singlet excited state of the azirine chromophore (S(1A)) is located 113 kcal/mol above its S(0) and that the singlet excited state of the ketone (S(1K)) is 85 kcal/mol. Furthermore, the transition state for cleaving the C-C bond in 1 to form 2 is located 49 kcal/mol above the S(0) of 1. Thus, we theorize that internal conversion of S(1A) to a vibrationally hot S(0) of 1 forms 2, whereas intersystem crossing from S(1K) to T(1K) results in 3.     

A crossed molecular beam imaging study of the O(1D2)+HCl-->OH+Cl(2P J=3/2, 1/2) reaction.

A crossed molecular beam study is presented for the O((1)D(2))+HCl-->OH+Cl((2)P(J)) reaction at the collision energy of 6 kcal mol(-1). State-resolved doubly differential cross sections are obtained for the Cl((2)P(J=3/2) ) and Cl*((2)P(J=1/2) ) products by velocity-map ion imaging. Both products are slightly more forward scattered, which suggests a reaction mechanism without a long-lived intermediate in the ground electronic state. A small fraction (23 %) of the energy release into the translational degree of freedom indicates strong internal excitation of the counterpart OH radical. The contribution of the electronic excited states of O--HCl to the overall reaction is also examined from the doubly differential cross sections.     

The almost bottleable triplet carbene: 2,6-dibromo-4-tert-butyl-2',6'-bis(trifluoromethyl)-4'-isopropyldiphenylcarbene.

Computations on 2,6-dibromo-4-tert-butyl-2',6'-bis(trifluoromethyl)-4'-isopropyldiphenylcarbene (1) using ab initio and density functional theory methods underscore the unusual stability of the triplet over the singlet state. At the B3LYP/6-311G(d,p) level, the triplet state had a slightly bent central C-C-C bond angle of 167 degrees, whereas this angle in the singlet was 134 degrees. The B3LYP singlet-triplet splitting (12.2 kcal/mol) was larger than that of the parent molecule (5.8 kcal/mol), diphenylcarbene (2), which also has a triplet ground state. The energy of a suitable isodesmic reaction showed the triplet and singlet states of (1) to be destabilized, by 6.3 and 12.5 kcal/mol, respectively, due to the combined effects of the CF3, Br, and alkyl substituents. The linear-coplanar form of (3)(1), which might facilitate dimerization or electrophilic attack at the more exposed diradical center, was prohibitively (35.9 kcal/mol) higher in energy. Our results confirm Tomioka's conclusion that the triplet diarylcarbene, ortho-substituted with bulky CF3 and Br substituents, is persistent due to steric protection of the diradical center. Dimerization and other possible reaction pathways are inhibited, not only by the bulky ortho substituents but also by the para alkyl groups. The increase in stability of the triplet ((3)(1)) state relative to the singlet ((1)(1)) state does not influence the reactivity directly.     

Photodissociation of cyclobutyl bromide at 234 nm studied using velocity map imaging

This study investigates the 234 nm photodissociation dynamics of cyclobutyl bromide using a two-dimensional photofragment velocity imaging technique. The spin-orbit ground- and excited-state Br(2P) atoms are state-selectively detected via [2+1] resonance enhanced multiphoton ionization (REMPI), whereas the cyclobutyl radicals are ionized using 157 nm laser light. The Br(2P(3/2)) and the Br(2P(1/2)) atoms and their c-C4H7 radical cofragments evidence a single-peaked, Gaussian-shaped translational energy distribution ranging from approximately 14 to approximately 39 kcal/mol and angular distributions with significant parallel character. The Br(2P(1/2))/ Br(2P(3/2)) spin-orbit branching ratio is determined to be 0.11 +/- 0.07 by momentum match between the Br(2P) photofragments and the recoiling c-C4H7 fragments, assuming a uniform photoionization probability of the c-C4H7 radicals with an internal energy range of 10-35 kcal/mol. The REMPI line strength ratio for the detection of Br(2P(3/2)) and Br(2P(1/2)) atoms at 233.681 and 234.021 nm, respectively, is therefore derived to be 0.10 +/- 0.07. The measured recoil kinetic energies of the c-C4H7 radicals, and the resulting distribution of internal energies, indicates some of the radicals are formed with total internal energies above the barrier to isomerization and subsequent dissociation, but our analysis indicates they may be stable due to the substantial fraction of the internal energy which is partitioned to rotational energy of the radicals.     

C-Cl bond fission dynamics and angular momentum recoupling in the 235 nm photodissociation of allyl chloride

The photodissociation dynamics of allyl chloride at 235 nm producing atomic Cl((2)P(J);J=1/2,3/2) fragments is investigated using a two-dimensional photofragment velocity ion imaging technique. Detection of the Cl((2)P(1/2)) and Cl((2)P(3/2)) products by [2+1] resonance enhanced multiphoton ionization shows that primary C-Cl bond fission of allyl chloride generates 66.8% Cl((2)P(3/2)) and 33.2% Cl((2)P(1/2)). The Cl((2)P(3/2)) fragments evidenced a bimodal translational energy distribution with a relative weight of low kinetic energy Cl((2)P(3/2))/high kinetic energy Cl((2)P(3/2)) of 0.097/0.903. The minor dissociation channel for C-Cl bond fission, producing low kinetic energy chlorine atoms, formed only chlorine atoms in the Cl((2)P(3/2)) spin-orbit state. The dominant C-Cl bond fission channel, attributed to an electronic predissociation that results in high kinetic energy Cl atoms, produced both Cl((2)P(1/2)) and Cl((2)P(3/2)) atomic fragments. The relative branching for this dissociation channel is Cl((2)P(1/2))/[Cl((2)P(1/2))+Cl((2)P(3/2))]=35.5%. The average fraction of available energy imparted into product recoil for the high kinetic energy products was found to be 59%, in qualitative agreement with that predicted by a rigid radical impulsive model. Both the spin-orbit ground and excited chlorine atom angular distributions were close to isotropic. We compare the observed Cl((2)P(1/2))/[Cl((2)P(1/2))+Cl((2)P(3/2))] ratio produced in the electronic predissociation channel of allyl chloride with a prior study of the chlorine atom spin-orbit states produced from HCl photodissociation, concluding that angular momentum recoupling in the exit channel at long interatomic distance determines the chlorine atom spin-orbit branching.     

Density functional and spin-orbit ab initio study of CF3Br: molecular properties and electronic curve crossing

Quantum chemical calculations of CF(3)Br and the CF(3) radical are performed using density functional theory (DFT) and time-dependent DFT (TDDFT). Molecular structures, vibrational frequencies, dipole moment, bond dissociation energy, and vertical excitation energies of CF(3)Br are calculated and compared with available experimental results. The performance of six hybrid and five hybrid meta functionals in DFT and TDDFT calculations are evaluated. The ωB97X, B3PW91, and M05-2X functionals give very good results for molecular structures, vibrational frequencies, and vertical excitation energies, respectively. The ωB97X functional calculates well the dipole moment of CF(3)Br. B3LYP, one of the most widely used functionals, does not perform well for calculations of the C-Br bond length, bond dissociation energy, and vertical excitation energies. Potential energy curves of the low-lying excited states of CF(3)Br are obtained using the multiconfigurational spin-orbit ab initio method. The crossing point between 2A(1) and 3E states is located near the C-Br bond length of 2.45 ?. Comparison with CH(3)Br shows that fluorination does not alter the location of the crossing point. The relation between the calculated potential energy curves and recent experimental result is briefly discussed.