Accelerated Surface Reconstruction through Regulating the Solid-Liquid Interface by Oxyanions in Perovskite Electrocatalysts for Enhanced Oxygen Evolution

A comprehensive understanding of surface reconstruction was critical to developing high performance lattice oxygen oxidation mechanism (LOM) based perovskite electrocatalysts. Traditionally, the primary determining factor of the surface reconstruction process was believed to be the oxygen vacancy formation energy. Hence, most previous studies focused on optimizing composition to reduce the oxygen vacancy formation energy, which in turn facilitated the surface reconstruction process. Here, for the first time, we found that adding oxyanions (SO₄²⁻, CO₃²⁻, NO₃⁻) into the electrolyte could effectively regulate the solid–liquid interface, significantly accelerating the surface reconstruction process and enhancing oxygen evolution reaction (OER) activities. Further studies indicated that the added oxyanions would adsorb onto the solid–liquid interface layer, disrupting the dynamic equilibrium between the adsorbed OH⁻ ions and the OH⁻ ions generated during surface reconstruction process. As such, the OH⁻ ions generated during surface reconstruction process could be more readily released into the electrolyte, thereby leading to an acceleration of the surface reconstruction. Thus, it was expected that our finding would provide a new layer of understanding to the surface reconstruction process in LOM-based perovskite electrocatalysts.     

Atomic‐Scale Insights into Surface Lattice Oxygen Activation at the Spinel/Perovskite interface of Co3O4/La0.3Sr0.7CoO3

Surface lattice oxygen in transition‐metal oxides plays a vital role in catalytic processes. Mastering activation of surface lattice oxygen and identifying the activation mechanism are crucial for the development and design of advanced catalysts. A strategy is now developed to create a spinel Co₃O₄ /perovskite La_0.3Sr_0.7CoO₃ interface by in situ reconstruction of the surface Sr enrichment region in perovskite LSC to activate surface lattice oxygen. XAS and XPS confirm that the regulated chemical interface optimizes the hybridized orbital between Co 3d and O 2p and triggers more electrons in oxygen site of LSC transferred into lattice of Co₃O₄ , leading to more inactive O^2? transformed into active O^2?x. Furthermore, the activated Co₃O₄/LSC exhibits the best catalytic activities for CO oxidation, oxygen evolution, and oxygen reduction. This work would provide a fundamental understanding to explain the activation mechanism of surface oxygen sites.     

Unlocking the Transition of Electrochemical Water Oxidation Mechanism Induced by Heteroatom Doping

Heteroatom doping has emerged as a highly effective strategy to enhance the activity of metal-based electrocatalysts toward the oxygen evolution reaction (OER). It is widely accepted that the doping does not switch the OER mechanism from the adsorbate evolution mechanism (AEM) to the lattice-oxygen-mediated mechanism (LOM), and the enhanced activity is attributed to the optimized binding energies toward oxygen intermediates. However, this seems inconsistent with the fact that the overpotential of doped OER electrocatalysts (<300 mV) is considerably smaller than the limit of AEM (>370 mV). To determine the origin of this inconsistency, we select phosphorus (P)-doped nickel-iron mixed oxides as the model electrocatalysts and observe that the doping enhances the covalency of the metal-oxygen bonds to drive the OER pathway transition from the AEM to the LOM, thereby breaking the adsorption linear relation between *OH and *OOH in the AEM. Consequently, the obtained P-doped oxides display a small overpotential of 237 mV at 10 mA cm⁻². Beyond P, the similar pathway transition is also observed on the sulfur doping. These findings offer new insights into the substantially enhanced OER activity originating from heteroatom doping.     

Role of copper grid mesh in the catalytic oxidation of CO over one-step synthesized Cu-Fe-Co ternary oxides thin film

The effective valuation of catalyst supports in the catalytic oxidation makes the contribution to understand the support effect of great interest. Here, the role of active substrate in the performance and stability of Cu-Fe-Co ternary oxides was studied towards the complete catalytic oxidation of CO. The Cu-Fe-Co oxide thin films were deposited on copper grid mesh (CUGM) using one-step pulsed-spray evaporation chemical vapor deposition method. Crystalline structure and morphology analyses revealed nano-crystallite sizes and dome-top-like morphology. Synergistic effects between Cu, Fe and Co, which affect the surface Cu²⁺, Fe³⁺, Co³⁺ and chemisorbed oxygen species (O²⁻ and OH⁻) of thin films over the active support and thus result in better reducibility. The thin film catalysts supported on CUGM exhibited attractive catalytic activity compared to the ternary oxides supported on inert grid mesh at a high gas hourly space velocity. Moreover, the stability in time-on-stream of the ternary oxides on CUGM was evaluated in the CO oxidation for 30 h. The adopted deposition strategy of ternary oxides on CUGM presents an excessive amount of adsorbed active oxygen species that play an important role in the complete CO oxidation. The catalysts supported on CUGM showed better catalytic conversion than that on inert grid mesh and some literature-reported noble metal oxides as well as transition metal oxides counterparts, revealing the beneficial effect of the CUGM support in the improvement of the catalytic performance.     

Stabilizing Sulfur Sites in Tetraoxygen Tetrahedral Coordination Structure for Efficient Electrochemical Water Oxidation

Ion regulation strategy is regarded as a promising pathway for designing transition metal oxide-based electrocatalysts for oxygen evolution reaction (OER) with improved activity and stability. Precise anion conditioning can accurately change the anionic environment so that the acid radical ions (SO₄²⁻, PO₃²⁻, SeO₄²⁻, etc.), regardless of their state (inside the catalyst, on the catalyst surface, or in the electrolyte), can optimize the electronic structure of the cationic active site and further increase the catalytic activity. Herein, we report a new approach to encapsulate S atoms at the tetrahedral sites of the NaCl-type oxide NiO to form a tetraoxo-tetrahedral coordination structure (S-O₄) inside the NiO (S-NiO -I). Density functional theory (DFT) calculations and operando vibrational spectroscopy proves that this kind of unique structure could achieve the S-O₄ and Ni-S stable structure in S-NiO-I. Combining mass spectroscopy characterization, it could be confirmed that the S-O₄ structure is the key factor for triggering the lattice oxygen exchange to participate in the OER process. This work demonstrates that the formation of tetraoxygen tetrahedral structure is a generalized key for boosting the OER performances of transition metal oxides.     

Improved Electrocatalytic Activity and Stability by Single Iridium Atoms on Iron-based Layered Double Hydroxides for Oxygen Evolution

Full understanding to the origin of the catalytic performance of a supported nanocatalyst from the points of view of both the active component and support is significant for the achievement of high performance. Herein, based on a model electrocatalyst of single-iridium-atom-doped iron (Fe)-based layered double hydroxides (LDH) for oxygen evolution reaction (OER), we reveal the first completed origin of the catalytic performance of such supported nanocatalysts. Specially, besides the activity enhancement of Ir sites by LDH support, the stability of surface Fe sites is enhanced by doped Ir sites: DFT calculation shows that the Ir sites can reduce the activity and enhance the stability of the nearby Fe sites; while further finite element simulations indicate, the stability enhancement of distant Fe sites could be attributed to the much low concentration of OER reactant (hydroxyl ions, OH⁻) around them induced by the much fast consumption of OH⁻ on highly active Ir sites. These new findings about the interaction between the main active components and supports are applicable in principle to other heterogeneous nanocatalysts and provide a completed understanding to the catalytic performance of heterogeneous nanocatalysts.     

X-ray photoelectron spectroscopy of surface-treated indium-tin oxide thin films

Angle-resolved X-ray photoelectron spectroscopy and photothermal deflection spectroscopy are used to study the oxygen-plasma or aquaregia treated indium-tin oxide (ITO) anodes for organic light-emitting diodes. Detailed analysis of the O1s core-level spectra and their dependence on photoemission angle was performed. The results indicate the presence of different chemical forms of oxygen atoms (two types of O²⁻, OH⁻, organic oxygens and H₂O) which evolve with surface treatment. We find that the treatments lead to a modification of the surface chemical states and therefore of the physico-chemical properties of ITO, which in turn control the performance of organic light-emitting diodes.     

Revealing the Formation Mechanism and Optimizing the Synthesis Conditions of Layered Double Hydroxides for the Oxygen Evolution Reaction

Layered double hydroxides (LDHs), whose formation is strongly related to OH⁻ concentration, have attracted significant interest in various fields. However, the effect of the real-time change of OH⁻ concentration on LDHs’ formation has not been fully explored due to the unsuitability of the existing synthesis methods for in situ characterization. Here, the deliberately designed combination of NH₃ gas diffusion and in situ pH measurement provides a solution to the above problem. The obtained results revealed the formation mechanism and also guided us to synthesize a library of LDHs with the desired attributes in water at room temperature without using any additives. After evaluating their oxygen evolution reaction performance, we found that FeNi-LDH with a Fe/Ni ratio of 25/75 exhibits one of the best performances so far reported.     

Direct Observation of Oxygen Vacancy Self‐Healing on TiO2 Photocatalysts for Solar Water Splitting

Oxygen vacancy (Vo) on transition metal oxides plays a crucial role in determining their chemical/physical properties. Conversely, the capability to directly detect the changing process of oxygen vacancies (Vos) will be important to realize their full potentials in the related fields. Herein, with a novel synchronous illumination X‐ray photoelectron spectroscopy (SI‐XPS) technique, we found that the surface Vos (surf‐Vos) exhibit a strong selectivity for binding with the water molecules, and sequentially capture an oxygen atom to achieve the anisotropic self‐healing of surface lattice oxygen. After this self‐healing process, the survived subsurface Vos (sub‐Vos) promote the charge excitation from Ti to O atoms due to the enriched electron located on low‐coordinated Ti sites. However, the excessive sub‐Vos would block the charge separation and transfer to TiO₂ surfaces resulted from the destroyed atomic structures. These findings open a new pathway to explore the dynamic changes of Vos and their roles on catalytic properties, not only in metal oxides, but in crystalline materials more generally.     

Kinetics of oxidation of SCN− by diperiodato cuprate(III) (DPC) in alkaline medium

The kinetics of oxidation of SCN⁻ by DPC has been investigated in alkaline medium. The reaction shows first-order dependence in [SCN⁻]. The pseudo-first-order rate constant (k_obs) changes differently under different [OH⁻]. At low [OH⁻], k_obs decreases when [OH⁻] increases, but when [OH⁻] increases to enough extent, k_obs increases with increase in [OH⁻]. Free radicals were observed in the process of reaction. A plausible mechanism involving Cu(HL)₂ and CuL as active substrates in the reaction has been proposed. The rate equations derived from the mechanism explain all the experimental phenomena satisfactorily. © 1996 John Wiley & Sons, Inc.     

Plasma chemistry in laser ablation processes

Based on the results of quantitative spectroscopic diagnostics (LIF in combination with time resolved emission spectroscopy) chemical dynamics in laser-produced plasmas of metallic (Ti, Al,), and graphite samples have been examined. The Nd-YAG (1064 nm, 10 ns, 100 mJ) and excimer XeCl (308 nm, 10 ns, 10 mJ) lasers were employed for ablation. The main attention was focused on the elucidation of a role of oxide and dimer formation in controlling spatio-temporal distributions of different species in the ablation plume. The results of the spatial and temporal analysis of a laser-produced plasma in air indicates the existence of diatomic oxides in the ablation plume both in the ground and excited states, which are formed from reactions between ablated metal atoms and oxygen. The efficiency of the oxidation reaction depends on the intensity and spot diameter of the ablation laser beam. The maximal concentration of TiO molecules are estimated to be of 1×10¹⁴ cm⁻³ at the time of 10 μs after the start of the ablation pulse. A comparison of spatial–temporal distributions of Ti atoms and excited TiO molecules allow us to find a correlation in their change, which proves that electronically excited Ti oxides are most probably formed from oxidation of atoms in the ground and low lying metastable states. The spectroscopic characterization of pulsed laser ablation carbon plasma has also been performed. The time–space distributions as well as the high vibrational temperature of C₂ molecules indicate that the dominant mechanism for production of C₂ is the atomic carbon recombination.     

Oxygen electroreduction at catalysts PtM (M = Co,Ni, or Cr)

Bimetallic catalysts PtM (M = Co, Ni, or Cr) are synthesized. They exceed purely platinum commercial catalyst E-TEK (20 wt % Pt) in its mass activity (mA/mg_Pt) and specific activity (mA/c_Pt²) in the oxygen reduction reaction. According to XRD data, the high-temperature synthesis involving metal N₄-complexes, chloroplatinic acid, and XC72 carbon black as precursors, yields alloys (or solid solutions) of the metals. The higher activity of the bimetallic catalyst PtCo/C is likely to be caused by the practically entire formation of solid solutions (Pt₃Co and PtCo), unlike PtNi and PtCr where nickel and chromium exist also as oxides that decorate the electrode surface and partly block active centers. It is shown that the mechanism of the oxygen reduction reaction at the synthesized catalysts is similar to that of oxygen reduction at the purely platinum catalyst. The slow stage in the process is transfer of the 1st electron; at potentials more positive than 0.6 V the reaction mainly yields water. The higher electrocatalytic activity of the bimetallic systems is caused by the alloy formation, which leads to changes in the bond length between platinum atoms. The achieving of the optimal bond length, as a result of the alloy formation, provides appropriate conditions for dissociative adsorption of oxygen molecules; the surface coverage with oxygen-containing particles adsorbed from water (which block active centers for O₂ adsorption) decreased. The increase in the activity may also be caused by the formation of the “core-shell” structures whose surface is enriched with platinum whose surface properties are changed under the ligand action of the core formed by the metal alloy     

Density functional theory studies on the external OH−‐induced barrierless proton dissociation mechanism for the forced hydrolysis reaction of Al3+(aq)

The forced hydrolysis reaction of aqueous aluminum ion (Al³⁺) is of critical importance in Al chemistry, but its microscopic mechanism has long been neglected. Herein, density functional calculations reveal an external OH⁻‐induced barrierless proton dissociation mechanism for the forced hydrolysis of Al³⁺(aq). Dynamic reaction pathway modeling results show that the barrierless deprotonations induced by the second‐ or third‐shell external OH⁻ proceed via the concerted proton transfer through H‐bond wires connected to the coordinated waters, and the inducing ability of the external OH⁻ decreases with increasing hydration layers between Al(H₂O)₆³⁺ and the external OH⁻. The OH⁻‐induced forced hydrolysis mechanism of Al³⁺(aq) is quite different from its self‐hydrolysis mechanism without OH⁻. The inducing ability is a unique characteristic of OH⁻, rather than other anions such as F⁻ or Cl⁻.     

Cyclic voltammetry on Ag(111) and Ag(100) faces in sodium hydroxide solutions

The electrochemical behavior of silver (100) and (111) single crystal surfaces was examined by cyclic voltammetry in aqueous NaOH solution. In the `double layer' region (between −1.2 and 0.1 V (SCE)) adsorption of OH⁻ ions followed by phase transformation into an Ag–OH monolayer was found to take place. The difference in peak potentials recorded in 0.1 and 0.01 mol dm⁻³ NaOH solutions of about 60 mV indicates that one electron is exchanged in the overall electrochemical reaction, implying a complete charge transfer between OH⁻ ions and the silver surface. The adsorption process has been modeled to a Frumkin adsorption isotherm. Further oxidation of silver into Ag₂O takes place at more positive potentials. The formation of bulk Ag₂O results in considerable change to the original single crystal surface. This is likely to be due to roughening of the silver surface as a consequence of the formation and reduction of the oxide.     

Enhanced ethanol sensing performance of N-doped ZnO derived from ZIF-8

Metal oxides derived from metal-organic framework (MOF) have attracted considerable attention due to its excellent performance and unique structure. Doping is considered as an effective method to improve gas-sensing performance. However, nonmetal doped metal oxides derived from MOF as gas-sensing materials have not been reported. Within this work, N atoms were successfully doped into the lattice of ZnO nanoparticles using ZIF-8 as a self-sacrificial template through a thermal treatment process with the assistant of urea. The obtained N-ZnO exhibited competitive ethanol-sensing performance, in which the response value of N-ZnO-5 to 100 ppm ethanol reached 115 at 190 °C with a satisfactory selectivity. It was found that the N-doping in ZnO facilitated the formation of oxygen vacancy that promoted the generation of adsorbed oxygen species to achieve the enhanced gas-sensing performance. Besides, the larger specific surface area resulting from the size reduction during the urea-assisted pyrolysis process can also be responsible for the improving of the ethanol-sensing performance.     

Kinetic Analysis of the Decomposition Reaction of the Mercury Jarosite in NaOH Medium

This work presents the kinetic study of the decomposition in NaOH medium of mercury jarosite whose approximate formula is [Hg_0.39(H₃O)_0.22]Fe_2.71(SO₄)_2.17(OH)_4.79(H₂O)_2.09. The reaction progress takes place on the surface of the compound with diffusion of the hydroxyl ions (OH⁻) from the solution to the particle surface moving the reaction front toward the interior of the particle, with the release of ions SO₄²⁻ and Hg²⁺ from the core to the reaction medium. The decomposition curve can be described by three kinetics stages: an induction period followed by a progressive conversion period and ending the reaction in the stabilization zone. The results of X−ray diffraction showed that as the decomposition reaction progresses the partially decomposed solids lost its crystallinity ending as amorphous solids. For the induction period, the reaction order (n ) was 0.52 for [OH⁻] < 0.0187 mol L⁻¹ and when [OH⁻] > 0.0187 mol L⁻¹ n = 1.48, whereas the calculated activation energy (E_a ) was 81.7 kJ mol⁻¹. For the progressive conversion period n = 0.99 for [OH⁻] > 0.0057 mol L⁻¹ and for lower concentrations n ≈ 0, with E_a = 56.9 kJ mol⁻¹, confirming that the decomposition process is controlled by the chemical reaction. Based on the calculated kinetic parameters, the partial and global kinetic expressions of the decomposition process were proposed. These models were compared with the experimental results, and it was favorably proven and described the decomposition process of the mercury jarosite in alkaline medium.     

Scaled‐Up Synthesis of Amorphous NiFeMo Oxides and Their Rapid Surface Reconstruction for Superior Oxygen Evolution Catalysis

The anode oxygen evolution reaction (OER) is known to largely limit the efficiency of electrolyzers owing to its sluggish kinetics. While crystalline metal oxides are promising as OER catalysts, their amorphous phases also show high activities. Efforts to produce amorphous metal oxides have progressed slowly, and how an amorphous structure benefits the catalytic performances remains elusive. Now the first scalable synthesis of amorphous NiFeMo oxide (up to 515 g in one batch) is presented with homogeneous elemental distribution via a facile supersaturated co‐precipitation method. In contrast to its crystalline counterpart, amorphous NiFeMo oxide undergoes a faster surface self‐reconstruction process during OER, forming a metal oxy(hydroxide) active layer with rich oxygen vacancies, leading to superior OER activity (280 mV overpotential at 10 mA cm^?2 in 0.1 m KOH). This opens up the potential of fast, facile, and scale‐up production of amorphous metal oxides for high‐performance OER catalysts.     

Frontispiece: Activating Lattice Oxygen in Spinel ZnCo2O4 through Filling Oxygen Vacancies with Fluorine for Electrocatalytic Oxygen Evolution

The development of productive catalysts for the oxygen evolution reaction (OER) remains a major challenge requiring significant progress in both mechanism and material design. Conventionally, the thermodynamic barrier of lattice oxidation mechanism (LOM) is lower than that of absorbate evolution mechanism (AEM) because the former can overcome certain limitations. However, controlling the OER pathway from the AEM to the LOM by exploiting the intrinsic properties of the catalyst remains challenging. Herein, we incorporated F anions into the oxygen vacancies of spinel ZnCo₂O₄ and established a link between the electronic structure and the OER catalytic mechanism. Theoretical density calculations revealed that F upshifts the O 2p center and activates the redox capability of lattice O, successfully triggering the LOM pathway. Moreover, the high electronegativity of F anions is favourable for balancing the residual protonation, which can stabilize the structure of the catalyst.     

Kinetic studies on H+- and OH−-catalysed aquation of bis-aspartatochromium(III)

A potential synthetic biochromium source, bis-aspartatochromium(III) ion (where Asp is a tridentate N,O,O′-ligand, bonded via amine nitrogen and carboxylate oxygen atoms) has been obtained and characterized in aqueous solution. Kinetics of partial dechelation of the complex catalysed by H⁺ and OH^? ions has been studied spectrophotometrically within 0.1–1.0 M HClO₄ and 0.1–1.0 M NaOH ranges under first-order conditions. A linear dependence of the k _obs,H on [H⁺] and independence of the k _obs,OH on [OH^?] were established. The derived rate expression and identification of components of the reaction mixture provide evidence for a reaction mechanism, where the key role in the overall process is the formation of an intermediate species with bidentate N,O-bonded Asp via both spontaneous and H⁺(OH^?)-catalysed reaction paths. The intermediate is meta-stable and at pH 5–7 restores the substrate.     

Activation of Oxygen on Gold and Silver Nanoparticles Assisted by Surface Plasmon Resonances

Surface plasmon resonances (SPRs) have been found to promote chemical reactions. In most oxidative chemical reactions oxygen molecules participate and understanding of the activation mechanism of oxygen molecules is highly important. For this purpose, we applied surface‐enhanced Raman spectroscopy (SERS) to find out the mechanism of SPR‐assisted activation of oxygen, by using p‐aminothiophenol (PATP), which undergoes a SPR‐assisted selective oxidation, as a probe molecule. In this way, SPR has the dual function of activating the chemical reaction and enhancing the Raman signal of surface species. Both experiments and DFT calculations reveal that oxygen molecules were activated by accepting an electron from a metal nanoparticle under the excitation of SPR to form a strongly adsorbed oxygen molecule anion. The anion was then transformed to Au or Ag oxides or hydroxides on the surface to oxidize the surface species, which was also supported by the heating effect of the SPR. This work points to a promising new era of SPR‐assisted catalytic reactions.