Covalent Organic Framework with Multi-Cationic Molecular Chains for Gate Mechanism Controlled Superionic Conduction in All-Solid-State Batteries

Although solid-state batteries (SSBs) are high potential in achieving better safety and higher energy density, current solid-state electrolytes (SSEs) cannot fully satisfy the complicated requirements of SSBs. Herein, a covalent organic framework (COF) with multi-cationic molecular chains (COF-MCMC) was developed as an efficient SSE. The MCMCs chemically anchored on COF channels were generated by nano-confined copolymerization of cationic ionic liquid monomers, which can function as Li⁺ selective gates. The coulombic interaction between MCMCs and anions leads to easier dissociation of Li⁺ from coordinated states, and thus Li⁺ transport is accelerated. While the movement of anions is restrained due to the charge interaction, resulting in a high Li⁺ conductivity of 4.9×10⁻⁴ S cm⁻¹ and Li⁺ transference number of 0.71 at 30 °C. The SSBs with COF-MCMC demonstrate an excellent specific energy density of 403.4 Wh kg⁻¹ with high cathode loading and limited Li metal source.     

Polymers with Intrinsic Microporosity as Solid Ion Conductors for Solid-State Lithium Batteries

Solid-state electrolytes (SSEs) with high ionic conductivity and superior stability are considered to be a key technology for the safe operation of solid-state lithium batteries. However, current SSEs are incapable of meeting the requirements for practical solid-state lithium batteries. Here we report a general strategy for achieving high-performance SSEs by engineering polymers of intrinsic microporosity (PIMs). Taking advantage of the interconnected ion pathways generated from the ionizable groups, high ionic conductivity (1.06×10⁻³ S cm⁻¹ at 25 °C) is achieved for the PIMs-based SSEs. The mechanically strong (50.0 MPa) and non-flammable SSEs combine the two superiorities of outstanding Li⁺ conductivity and electrochemical stability, which can restrain the dendrite growth and prevent Li symmetric batteries from short-circuiting even after more than 2200 h cycling. Benefiting from the rational design of SSEs, PIMs-based SSEs Li-metal batteries can achieve good cycling performance and superior feasibility in a series of withstand abuse tests including bending, cutting, and penetration. Moreover, the PIMs-based SSEs endow high specific capacity (11307 mAh g⁻¹) and long-term discharge/charge stability (247 cycles) for solid-state Li−O₂ batteries. The PIMs-based SSEs present a powerful strategy for enabling safe operation of high-energy solid-state batteries.     

Sodium Carbazolide and Derivatives as Solid-State Electrolytes for Sodium-Ion Batteries

Replacing widely used organic liquid electrolytes with solid-state electrolytes (SSEs) could effectively solve the safety issues in sodium-ion batteries. Efforts on seeking novel solid-state electrolytes have been continued for decades. However, issues about SSEs still exist, such as low ionic conductivity at ambient temperature, difficulty in manufacturing, low electrochemical stability, poor compatibility with electrodes, etc. Here, sodium carbazolide (Na-CZ) and its THF-coordinated derivatives are rationally fabricated as Na⁺ conductors, and two of their crystal structures are successfully solved. Among these materials, THF-coordinated complexes exhibit fast Na⁺ conductivities, i.e., 1.20×10⁻⁴ S cm⁻¹ and 1.95×10⁻³ S cm⁻¹ at 90 °C for Na-CZ-1THF and Na-CZ-2THF, respectively, which are among the top Na⁺ conductors under the same condition. Furthermore, stable Na plating/stripping is observed even over 400 h cycling, showing outstanding interfacial stability and compatibility against Na electrode. More advantages such as ease of synthesis, low-cost, and cold pressing for molding can be obtained. In situ NMR results revealed that the evaporation of THF may play an essential role in the Na⁺ migration, where the movement of THF creates defects/vacancies and facilitates the migration of Na⁺.     

Liquid-Free All-Solid-State Zinc Batteries and Encapsulation-Free Flexible Batteries Enabled by In Situ Constructed Polymer Electrolyte

Zn batteries are usually considered as safe aqueous systems that are promising for flexible batteries. On the other hand, any liquids, including water, being encapsulated in a deformable battery may result in problems. Developing completely liquid-free all-solid-state Zn batteries needs high-quality solid-state electrolytes (SSEs). Herein, we demonstrate in situ polymerized amorphous solid poly(1,3-dioxolane) electrolytes, which show high Zn ion conductivity of 19.6 mS cm⁻¹ at room temperature, low interfacial impedance, highly reversible Zn plating/stripping over 1800 h cycles, uniform and dendrite-free Zn deposition, and non-dry properties. The in-plane interdigital-structure device with the electrolyte completely exposed to the open atmosphere can be operated stably for over 30 days almost without weight loss or electrochemical performance decay. Furthermore, the sandwich-structure device can normally operate over 40 min under exposure to fire. Meanwhile, the interfacial impedance and the capacity using in situ-formed solid polymer electrolytes (SPEs) remain almost unchanged after various bending tests, a key criterion for flexible/wearable devices. Our study demonstrates an approach for SSEs that fulfill the requirement of no liquid and mechanical robustness for practical solid-state Zn batteries.     

The Universal Super Cation-Conductivity in Multiple-cation Mixed Chloride Solid-State Electrolytes

As exciting candidates for next-generation energy storage, all-solid-state lithium batteries (ASSLBs) are highly dependent on advanced solid-state electrolytes (SSEs). Here, using cost-effective LaCl₃ and CeCl₃ lattice (UCl₃-type structure) as the host and further combined with a multiple-cation mixed strategy, we report a series of UCl₃-type SSEs with high room-temperature ionic conductivities over 10⁻³ S cm⁻¹ and good compatibility with high-voltage oxide cathodes. The intrinsic large-size hexagonal one-dimensional channels and highly disordered amorphous phase induced by multi-metal cation species are believed to trigger fast multiple ionic conductions of Li⁺, Na⁺, K⁺, Cu⁺, and Ag⁺. The UCl₃-type SSEs enable a stable prototype ASSLB capable of over 3000 cycles and high reversibility at −30 °C. Further exploration of the brand-new multiple-cation mixed chlorides is likely to lead to the development of advanced halide SSEs suitable for ASSLBs with high energy density.     

Halide/sulfide composite solid-state electrolyte for Li-anode based all-solid-state batteries

Li₂ZrCl₆ (LZC) solid-state electrolytes (SSEs) have been recognized as a candidate halide SSEs for all-solid-state Li batteries (ASSLBs) with high energy density and safety due to its great compatibility with 4 V-class cathodes and low bill-of-material (BOM) cost. However, despite the benefits, the poor chemical/electrochemical stability of LZC against Li metal causes the deterioration of Li/LZC interface, which has a detrimental inhibition on Li⁺ transport in ASSLBs. Herein, we report a composite SSE combining by LZC and argyrodite buffer layer (Li₆PS₅Cl, LPSC) that prevent the unfavorable interaction between LZC and Li metal. The Li/LPSC-LZC-LPSC/Li symmetric cell stably cycles for over 1000 h at 0.3 mA/cm² (0.15 mAh/cm²) and has a high critical current density (CCD) value of 2.1 mA/cm² at 25 °C. Under high temperature (60 °C) which promotes the reaction between Li and LZC, symmetric cell fabricated with composite SSE also display stable cycling performance over 1200 h at 0.3 mAh/cm². Especially, the Li/NCM ASSLBs fabricated with composite SSE exhibit a high initial coulombic efficiency, as well as superior cycling and rate performance. This simple and efficient strategy will be instrumental in the development of halide-based high-performance ASSLBs.     

Porous Cyclodextrin Polymer Enables Dendrite-Free and Ultra-Long Life Solid-State Zn-I2 Batteries

Zn-I₂ batteries have attracted attention due to their low cost, safety, and environmental friendliness. However, their performance is still limited by the irreversible growth of Zn dendrites, hydrogen evolution reactions, corrosion, and shuttle effect of polyiodide. In this work, we have prepared a new porous polymer (CD-Si) by nucleophilic reaction of β-cyclodextrin with SiCl₄, and CD-Si is applied to the solid polymer electrolyte (denoted PEO/PVDF/CD-Si) to solve above-mentioned problems. Through the anchoring of the CD-Si, a conductive network with dual transmission channels was successfully constructed. Due to the non-covalent anchoring effect, the ionic conductivity of the solid polymer electrolytes (SPE) can reach 1.64×10⁻³ S cm⁻¹ at 25 °C. The assembled symmetrical batteries can achieve highly reversible dendrite-free galvanizing/stripping (stable cycling for 7500 h at 5 mA cm⁻² and 1200 h at 20 mA cm⁻²). The solid-state Zn-I₂ battery shows an ultra-long life of over 35,000 cycles at 2 A g⁻¹. Molecular dynamics simulations are performed to elucidate the working mechanism of CD-Si in the polymer matrix. This work provides a novel strategy towards solid electrolytes for Zn-I₂ batteries.     

Locally Concentrated Ionic Liquid Electrolytes Enabling Low-Temperature Lithium Metal Batteries

Lithium metal is a promising anode material for next-generation high-energy-density batteries but suffers from low stripping/plating Coulombic efficiency and dendritic growth particularly at sub-zero temperatures. Herein, a poorly-flammable, locally concentrated ionic liquid electrolyte with a wide liquidus range extending well below 0 °C is proposed for low-temperature lithium metal batteries. Its all-anion Li⁺ solvation and phase-nano-segregation solution structure are sustained at low temperatures, which, together with a solid electrolyte interphase rich in inorganic compounds, enable dendrite-free operation of lithium metal anodes at −20 °C and 0.5 mA cm⁻², with a Coulombic efficiency of 98.9 %. As a result, lithium metal batteries coupling thin lithium metal anodes (4 mAh cm⁻²) and high-loading LiNi_0.8Co_0.15Al_0.05O₂ cathodes (10 mg cm⁻²) retain 70 % of the initial capacity after 100 cycles at −20 °C. These results, as a proof of concept, demonstrate the applicability of locally concentrated ionic liquid electrolytes for low-temperature lithium metal batteries.     

A Shuttle-Free Solid-State Cu−Li Battery Based on a Sandwich-Structured Electrolyte

Cu−Li batteries leveraging the two-electron redox property of Cu can offer high energy density and low cost. However, Cu−Li batteries are plagued by limited solubility and a shuttle effect of Cu ions in traditional electrolytes, which leads to low energy density and poor cycling stability. In this work, we rationally design a solid-state sandwich electrolyte for solid-state Cu−Li batteries, in which a deep-eutectic-solvent gel with high Cu-ion solubility is devised as a Cu-ion reservoir while a ceramic Li_1.4Al_0.4Ti_1.6(PO₄)₃ interlayer is used to block Cu-ion crossover. Because of the high ionic conductivity (0.55 mS cm⁻¹ at 25 °C), wide electrochemical window (>4.5 V vs. Li⁺/Li), and high Cu ion solubility of solid-state sandwich electrolyte, a solid-state Cu−Li battery demonstrates a high energy density of 1 485 Wh kg_Cu⁻¹and long-term cyclability with 97 % capacity retention over 120 cycles. The present study lays the groundwork for future research into low-cost solid-state Cu−Li batteries.     

PEO-LITFSI-SiO2-SN System Promotes the Application of Polymer Electrolytes in All-Solid-State Lithium-ion Batteries

All-solid-state polymer lithium-ion batteries are ideal choice for the next generation of rechargeable lithium-ion batteries due to their high energy, safety and flexibility. Among all polymer electrolytes, PEO-based polymer electrolytes have attracted extensive attention because they can dissolve various lithium salts. However, the ionic conductivity of pure PEO-based polymer electrolytes is limited due to high crystallinity and poor segment motion. An inorganic filler SiO₂ nanospheres and a plasticizer Succinonitrile (SN) are introduced into the PEO matrix to improve the crystallization of PEO, promote the formation of amorphous region, and thus improve the movement of PEO chain segment. Herein, a PEO₁₈−LiTFSI−5 %SiO₂−5 %SN composite solid polymer electrolyte (CSPE) was prepared by solution-casting. The high ionic conductivity of the electrolyte was demonstrated at 60 °C up to 3.3×10⁻⁴ S cm⁻¹. Meanwhile, the electrochemical performance of LiFePO₄/CSPE/Li all-solid-state battery was tested, with discharge capacity of 157.5 mAh g⁻¹ at 0.5 C, and capacity retention rate of 99 % after 100 cycles at 60 °C. This system provides a feasible strategy for the development of efficient all-solid-state lithium-ion batteries.     

In Situ Polymerized 1,3-Dioxolane Electrolyte for Integrated Solid-State Lithium Batteries

Solid-state lithium batteries are promising and safe energy storage devices for mobile electronics and electric vehicles. In this work, we report a facile in situ polymerization of 1,3-dioxolane electrolytes to fabricate integrated solid-state lithium batteries. The in situ polymerization and formation of solid-state dioxolane electrolytes on interconnected carbon nanotubes (CNTs) and active materials is the key to realizing a high-performance battery with excellent interfacial contact among CNTs, active materials and electrolytes. Therefore, the electrodes could be tightly integrated into batteries through the CNTs and electrolyte. Electrons/ions enable full access to active materials in the whole electrode. Electrodes with a low resistance of 4.5 Ω □⁻¹ and high lithium-ion diffusion efficiency of 2.5×10⁻¹¹ cm² s⁻¹ can significantly improve the electrochemical kinetics. Subsequently, the batteries demonstrated high energy density, amazing charge/discharge rate and long cycle life.     

Water‐Mediated Synthesis of a Superionic Halide Solid Electrolyte

To promote the development of solid‐state batteries, polymer‐, oxide‐, and sulfide‐based solid‐state electrolytes (SSEs) have been extensively investigated. However, the disadvantages of these SSEs, such as high‐temperature sintering of oxides, air instability of sulfides, and narrow electrochemical windows of polymers electrolytes, significantly hinder their practical application. Therefore, developing SSEs that have a high ionic conductivity (>10^?3 S cm^?1), good air stability, wide electrochemical window, excellent electrode interface stability, low‐cost mass production is required. Herein we report a halide Li⁺ superionic conductor, Li₃InCl₆, that can be synthesized in water. Most importantly, the as‐synthesized Li₃InCl₆ shows a high ionic conductivity of 2.04×10^?3 S cm^?1 at 25 °C. Furthermore, the ionic conductivity can be recovered after dissolution in water. Combined with a LiNi_0.8Co_0.1Mn_0.1O₂ cathode, the solid‐state Li battery shows good cycling stability.     

Building an Air Stable and Lithium Deposition Regulable Garnet Interface from Moderate-Temperature Conversion Chemistry

Garnet-type electrolytes suffer from unstable chemistry against air exposure, which generates contaminants on electrolyte surface and accounts for poor interfacial contact with the Li metal. Thermal treatment of the garnet at >700 °C could remove the surface contaminants, yet it regenerates the contaminants in the air, and aggravates the Li dendrite issue as more electron-conducting defective sites are exposed. In a departure from the removal approach, here we report a new surface chemistry that converts the contaminants into a fluorinated interface at moderate temperature <180 °C. The modified interface shows a high electron tunneling barrier and a low energy barrier for Li⁺ surface diffusion, so that it enables dendrite-proof Li plating/stripping at a high critical current density of 1.4 mA cm⁻². Moreover, the modified interface exhibits high chemical and electrochemical stability against air exposure, which prevents regeneration of contaminants and keeps high critical current density of 1.1 mA cm⁻². The new chemistry presents a practical solution for realization of high-energy solid-state Li metal batteries.     

Design and Fabrication of PEO-HPMC@Ht Composite Solid-state Electrolytes in All-solid-state Lithium Battery

All-solid electrolyte instead of frequently-used inflammable electrolyte can enhance the security and energy density of batteries effectively. However, the low ionic conductivity lead to increased lithium dendrites and increased resistance of the cell at 30 °C. In this work, non-toxic and low-cost hydroxypropyl methylcellulose (HPMC) was introduced simultaneously with non-polluting hectorite (Ht) into polyoxyethylene (PEO) to obtain novel composite solid-state electrolytes (CSEs). The optimized CSEs has a high ionic conductivity (1.1×10⁻³ S/cm) at 30 °C. This work demonstrates that the novel PEO-HPMC@Ht CSEs are extremely promising.     

Resolving the Heat Generated from ZrO2 Atomic Layer Deposition Surface Reactions

In situ pyroelectric calorimetry and spectroscopic ellipsometry were used to investigate surface reactions in atomic layer deposition (ALD) of zirconium oxide (ZrO₂). Calibrated and time-resolved in situ ALD calorimetry provides new insights into the thermodynamics and kinetics of saturating surface reactions for tetrakis(dimethylamino)zirconium(IV) (TDMAZr) and water. The net ALD reaction heat ranged from 0.197 mJ cm⁻² at 76 °C to 0.155 mJ cm⁻² at 158 °C, corresponding to an average of 4.0 eV/Zr at all temperatures. A temperature dependence for reaction kinetics was not resolved over the range investigated. The temperature dependence of net reaction heat and distribution among metalorganic and oxygen source exposure is attributed to factors including growth rate, equilibrium surface hydroxylation, and the extent of the reaction. ZrO₂-forming surface reactions were investigated computationally using DFT methods to better understand the influence of surface hydration on reaction thermodynamics.     

Synergistic Fe−Se Atom Pairs as Bifunctional Oxygen Electrocatalysts Boost Low-Temperature Rechargeable Zn-Air Battery

Herein, we successfully construct bifunctional electrocatalysts by synthesizing atomically dispersed Fe−Se atom pairs supported on N-doped carbon (Fe−Se/NC). The obtained Fe−Se/NC shows a noteworthy bifunctional oxygen catalytic performance with a low potential difference of 0.698 V, far superior to that of reported Fe-based single-atom catalysts. The theoretical calculations reveal that p-d orbital hybridization around the Fe−Se atom pairs leads to remarkably asymmetrical polarized charge distributions. Fe−Se/NC based solid-state rechargeable Zn-air batteries (ZABs−Fe−Se/NC) present stable charge/discharge of 200 h (1090 cycles) at 20 mA cm⁻² at 25 °C, which is 6.9 times of ZABs−Pt/C+Ir/C. At extremely low temperature of −40 °C, ZABs−Fe−Se/NC displays an ultra-robust cycling performance of 741 h (4041 cycles) at 1 mA cm⁻², which is about 11.7 times of ZABs−Pt/C+Ir/C. More importantly, ZABs−Fe−Se/NC could be operated for 133 h (725 cycles) even at 5 mA cm⁻² at −40 °C.     

Eutectic-Based Polymer Electrolyte with the Enhanced Lithium Salt Dissociation for High-Performance Lithium Metal Batteries

The deployment of lithium metal anode in solid-state batteries with polymer electrolytes has been recognized as a promising approach to achieving high-energy-density technologies. However, the practical application of the polymer electrolytes is currently constrained by various challenges, including low ionic conductivity, inadequate electrochemical window, and poor interface stability. To address these issues, a novel eutectic-based polymer electrolyte consisting of succinonitrile (SN) and poly (ethylene glycol) methyl ether acrylate (PEGMEA) is developed. The research results demonstrate that the interactions between SN and PEGMEA promote the dissociation of the lithium difluoro(oxalato) borate (LiDFOB) salt and increase the concentration of free Li⁺. The well-designed eutectic-based PAN_1.2-SPE (PEGMEA: SN=1: 1.2 mass ratio) exhibits high ionic conductivity of 1.30 mS cm⁻¹ at 30 °C and superior interface stability with Li anode. The Li/Li symmetric cell based on PAN_1.2-SPE enables long-term plating/stripping at 0.3 and 0.5 mA cm⁻², and the Li/LiFePO₄ cell achieves superior long-term cycling stability (capacity retention of 80.3 % after 1500 cycles). Moreover, Li/LiFePO₄ and Li/LiNi_0.6Co_0.2Mn_0.2O₂ pouch cells employing PAN_1.2-SPE demonstrate excellent cycling and safety characteristics. This study presents a new pathway for designing high-performance polymer electrolytes and promotes the practical application of high-stable lithium metal batteries.     

A new promising high temperature lithium battery solid electrolyte

Lithium lanthanoid silicates find importance as a solid electrolyte in high temperature lithium batteries in view of its high ionic conductivity at high temperatures. An first ever attempt is made to synthesis a new high temperature solid electrolyte viz., lithium samarium holmium silicate by sol–gel process and it has been characterized by thermal analysis (TGA–DTA), X-ray diffraction (XRD), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Lithium ion conductivity of 0.8087 × 10⁻⁷ Ω⁻¹ cm⁻¹ at 25 °C was obtained and it increases with increasing temperature. For the first time a highest conductivity of 0.1095 × 10⁻² Ω⁻¹ cm⁻¹ was obtained at 850 °C which is high compared to other high temperature lithium battery solid electrolytes.     

Spontaneous Proton Chemistry Enables Ultralow-temperature and Long-life Aqueous Copper Metal Batteries

Aqueous copper metal batteries with acidic electrolytes are regarded as promising candidates for low-temperature energy storage, benefiting from fast kinetics of protons and acid resistance of copper. Here, a Cu(BF₄)₂ electrolyte that spontaneously generates protons is developed for ultralow-temperature copper metal batteries. Systematic studies demonstrate that the hydrolysis of BF₄⁻ generates more protons, rendering the Cu(BF₄)₂ among the most effective aqueous electrolyte capable of breaking hydrogen bonds in water molecules. This electrolyte endows a polyaniline/Cu battery to deliver a short charging time of 21 s and a charge/discharge capability of up to 10 A g⁻¹ at −30 °C, along with a high discharge specific capacity of 70 mAh g⁻¹ and a supercapacitor-comparable power density of 3000 W kg⁻¹. Furthermore, it can exhibit a long and stable cycling lifespan over 10 000 cycles at −50 °C and works well at −70 °C. This work provides an opportunity for intrinsically acidic electrolytes.     

Lithium-doped,organic ionic plastic crystal electrolytes exhibiting high ambient-temperature conductivities

Film-forming, ionic plastic crystal—N,N-diethyl-N-methyl-N-(n-propyl)ammonium trifluoromethyltrifluoroborate (N₁₂₂₃[CF₃BF₃])—has been doped with Li[CF₃BF₃] salt to prepare stable Li-ion conducting plastic crystal electrolytes. Solid-state conductivities as high as 10⁻⁴–10⁻³ S cm⁻¹ have been obtained within the ambient-temperature plastic crystalline phase of the Li-doped materials. Solid-state Li deposition/dissolution based on these materials has been realized at 25 °C. The outstanding properties of these materials make them attractive candidates for all-solid-state Li batteries.