A Series of Collaborations between Various Pharmaceutical Companies and Regulatory Authorities Concerning the Analysis of Biomolecules Using Capillary Electrophoresis: Additional Instruments/Buffer

An international project team (including members from US, Canada and UK) was formed from a number of interested biopharmaceutical companies and regulatory authorities to conduct a cross-organisation collaboration exercise. The results of the first comparison with eight different organisations that used instruments of the same equipment model, the same reagents, and the same methodology has been reported previously [1]. This report represents the addition of other instruments using a different run buffer. The relative migration times were different, as expected, prohibiting a direct comparison between companies. The within-organisation variability was low for both relative migration time (<0.34% RSD% for all companies save one) and the peak area (<5% RSD% for all companies save one) when measuring the purity of a representative IgG sample. The apparent molecular weight of bovine serum albumin was measured with good precision (less than 10% RSD% across all companies) to the theoretical value when all data is utilized (67.5 kDa compared to 66.4 kDa). For a representative IgG sample, the three main components, IgG Light Chain, IgG Non-glycosylated Heavy Chain, and IgG Heavy Chain, could not be separated, specifically the IgG Non-glycosylated Heavy Chain and IgG Heavy Chain. When the IgG Non-glycosylated Heavy Chain and IgG Heavy Chain were combined for all organisations, the fractional peak area for the IgG Light Chain and IgG Non-glycosylated Heavy Chain + IgG Heavy Chain peak also showed excellent agreement, with less than 7.5 and 3.5% RSD%, respectively. The value of this exercise is in demonstrating the reliability of CE for the determination of apparent size of biopharmaceutical proteins. This underpins the appropriate use of such CE data in support of regulatory submissions.     

A Series of Collaborations Between Various Pharmaceutical Companies and Regulatory Authorities Concerning the Analysis of Biomolecules Using Capillary Electrophoresis

An international project team (including members from US, Canada and UK) has been formed from a number of interested biopharmaceutical companies and regulatory authorities to conduct a cross-organisation collaboration exercise. The results from this exercise demonstrate the robustness of CE-SDS across eight different organisations that used instruments of the same equipment model, the same reagents, and the same methodology. Data generated from the analysis of a series of molecular weight markers showed very good precision with regards to relative migration time (RMT) both within and between organisations. The apparent molecular weight of bovine serum albumin (BSA) was measured with good precision to within approximately 2% RSD across the participants. A representative IgG sample showed similar results with regards to relative migration time of its 3 main components, IgG Light Chain, IgG Non-glycosylated Heavy Chain, and IgG Heavy Chain. Fractional peak area for each peak also showed good agreement, with less than 9% RSD for all peaks. This exercise will facilitate both increased regulatory and industrial opinion of CE for biopharmaceutical analysis.CE in the Biotechnology & Pharmaceutical Industries: 7th Symposium on the Practical Applications for the Analysis of Proteins, Nucleotides and Small Molecules, Montreal, Canada, August 12–16, 2005     

Fabrication of a carbon nanotube-polyurethane composite electrode by in situ polyaddition for use in amperometric detection in capillary electrophoresis

The article describes the preparation of an electrode for amperometric detection in capillary electrophoresis (CE). It consists of a copper wire that was coated with a composite consisting of carbon nanotubes and polyurethane that was fabricated by in-situ polyaddition from a mixture of polyurethane prepolymer, curing agent, and carbon nanotubes (CNTs) inside a fused silica capillary. The structure of the composite was characterized by scanning electron microscopy, X-ray diffraction, thermogravimetry and FT-IR. The results indicated that CNTs were well dispersed and embedded throughout the composite to form an interconnected conducting network. The performance and advantages of the detection electrode are demonstrated by the separation and detection of standard mixtures of the hesperidin, hesperetin, naringenin and naringin by CE. The four flavanones are well separated within 12 min in a 40 cm long capillary at a separation voltage of 12 kV using a 50 mM sodium borate buffer (pH 9.2). The CNT-based electrode offers lower detection potential (0.8 V), enhanced detection limits (0.22–0.31 μM), lower costs of operation, high resistance to surface fouling, and improved stability. It shows long-term stability and repeatability, and relative standard deviations are <5 % for the peak current (for n = 15). The method was applied to the determination of flavanone in the peels of citrus fruits.

Open image in new window

Graphical abstract A copper electrode modified with a composite consisting of carbon nanotubes and polyurethane for amperometric detection in capillary electrophoresis

     

Separation and stacking of iodine species from seafood using surfactant-coated multiwalled carbon nanotubes as a pseudo-stationary phase in capillary electrophoresis

This article describes an on-line technique for hydrodynamic injections of long sample plugs with simultaneous stacking of iodine species in capillary electrophoresis (CE) with diode array detection. Surfactant-coated multi-walled carbon nanotubes (SC-MWNTs) were used as a pseudostationary phase for the separation of iodate, tetraiodothyronine,triiodothyronine, diiodothyronine, and diiodotyrosine. The effects of MWNTs, concentration of SC-MWNTs and salt, of buffer pH value, injection times were examined. Under the optimized conditions, i.e. detection at 230 nm, a separation voltage 25 kV, a borate running buffer of pH 7.5 and a SC-MWNT concentration of 9 μg?·?mL^?1, the method gave relative standard deviations of the retention times and peak areas in intra-day assays (for n?=?6) and for inter-day assays (for n?=?3) of less than 4.49 and 5.80 %, respectively. The CE method was then applied to the analysis of the above iodine species in (spiked) kelp (kunbu) and porphyra, and recoveries ranged from 81.6 to 98.4 % with RSDs (n?=?3) for extraction repeatability of <3.39 % in all cases.

Open image in new window

Graphical Abstract Surfactant coated multi-walled carbon nanotubes were used as a pseudostationary phase to improve separation in iodine speciation. A highly sensitive stacking method was developed to enhance the detection sensitivity of iodine species. The CE method was then applied to the analysis of iodine species in kelp and porphyra.

     

Very fast capillary electrophoresis with electrochemical detection for high-throughput analysis using short,vertically aligned capillaries

A method for conducting fast and efficient capillary electrophoresis (CE) based on short separation capillaries in vertical alignment was developed. The strategy enables for high-throughput analysis from small sample vials (low microliter to nanoliter range). The system consists of a lab-made miniaturized autosampling unit and an amperometric end-column detection (AD) cell. The device enables a throughput of up to 200 separations per hour. CE-AD separations of a dye model system in capillaries of only 4 to 7.5 cm length with inner diameters (ID) of 10 or 15 μm were carried out under conditions of very high electric field strengths (up to 3.0 kV/cm) with high separation efficiency (half peak widths below 0.2 s) in less than 3.5 s migration time. A non-aqueous background electrolyte, consisting of 10 mM ammonium acetate and 1 M acetic acid in acetonitrile, was used. The practical suitability of the system was evaluated by applying it to the determination of dyes in overhead projector pens. Fig. 1

Schematic illustration of high-throughput capillary electrophoresis with electrochemical detection     

Quantitative characterization by asymmetrical flow field-flow fractionation of IgG thermal aggregation with and without polymer protective agents

Complexes formed between poly(acrylates) and polyclonal immunoglobulin G (IgG) in its native conformation and after heat stress were characterized using asymmetric flow field-flow fractionation (AF4) coupled with on-line UV-Vis spectroscopy and multi-angle light-scattering detection (MALS). Mixtures of IgG and poly(acrylates) of increasing structural complexity, sodium poly(acrylate) (PAA), a sodium poly(acrylate) bearing at random 3 mol % n-octadecyl groups, and a random copolymer of sodium acrylate (35 mol %), N-n-octylacrylamide (25 mol %) and N-isopropylacrylamide (40 mol %), were fractionated in a sodium phosphate buffer (0.02 M, pH 6.8) in the presence, or not, of 0.1 M NaCl. The AF4 protocol developed allowed the fractionation of solutions containing free poly(acrylates), native IgG monomer and dimer, poly(acrylates)/IgG complexes made up of one IgG molecule and a few polymer chains, and/or larger poly(acrylates)/IgG aggregates. The molar mass and recovery of the soluble analytes were obtained for mixed solutions of poly(acrylates) and native IgG and for the same solutions incubated at 65 °C for 10 min. From the combined AF4 results, we concluded that in solutions of low ionic strength, the presence of PAA increased the recovery ratio of IgG after thermal stress because of the formation of electrostatically-driven PAA/IgG complexes, but PAA had no protective effect in the presence of 0.1 M NaCl. Poly(acrylates) bearing hydrophobic groups significantly increased IgG recovery after stress, independently of NaCl concentration, because of the synergistic effect of hydrophobic and electrostatic interactions. The AF4 results corroborate conclusions drawn from a previous study combining four analytical techniques. This study demonstrates that AF4 is an efficient tool for the analysis of protein formulations subjected to stress, an important achievement given the anticipated important role of proteins in near-future human therapies. ?      

A glassy carbon electrode modified with poly(eriochrome black T) for sensitive determination of adenine and guanine

A thin film of poly(eriochrome black T) was deposited on the surface of glassy carbon electrode by cyclic voltammetry, and this system is shown to enable the sensitive determination of adenine (A) and guanine (G). Scanning electron microscopy, Fourier transform infrared spectroscopy and electrochemical impedance spectroscopy were carried out to characterize the film which exhibits excellent electrocatalytic activity toward the oxidation of A and G in 0.1 M phosphate buffer solution (pH 4.0). Square wave voltammetry reveals an oxidation peak at 1084 mV whose current is linearly related to the concentration of A in the range from 0.05 to 1.00 μM. The oxidation peak for G occurs at 788 mV, and its current is linearly related to the concentration of G in the range from 0.025 to 1.00 μM. The detection limits are 0.017 μM for A and 0.008 μM for G (at S/N?=?3), respectively. The modified electrode displays good reproducibility and selectivity for the determination of A and G. The sensor was applied to quantify A and G in fish sperm DNA with satisfactory results.

Simultaneous voltammetric determination of 2-nitrophenol and 4-nitrophenol based on an acetylene black paste electrode modified with a graphene-chitosan composite

We describe a simple and sensitive voltammetric method for the simultaneous determination of 2-nitrophenol and 4-nitrophenol. It is based on the use of an acetylene black paste electrode modified with a graphene-chitosan composite film (denoted as Gr-Chit/ABPE). The reduction peak currents of 2-nitrophenol (at ?252 mV) and of 4-nitrophenol (at ?340 mV) in pH 1.0 solution increase significantly at the Gr-Chit/ABPE in comparison to a bare ABPE. Factors affecting sensitivity were optimized and a linear relationship is found between peak current and the concentrations of 2-nitrophenol (in the 0.4 μM to 80 μM range) and for 4-nitrophenol (in the 0.1 μM to 80 μM range). The detection limits (at an SNR of 3 and after a 30-s accumulation time) are 200 nM for 2-nitrophenol and 80 nM for 4-nitrophenol, respectively. The modified electrode was successfully applied to the direct and parallel determination of 2-nitrophenol and 4-nitrophenol in spiked water samples.

A voltammetric sensor based on graphene-modified electrode for the determination of trace amounts of l-dopa in mouse brain extract and pharmaceuticals

l-Dopa is the intermediate precursor of the neurotransmitter dopamine. Unlike dopamine, l-dopa easily enters the central nervous system. l-Dopa, as one of the catecholamines, is widely used as a source of dopamine in the treatment of most patients with Parkinson’s disease and epilepsy. Graphene (GR) is ideally suited for implementation in electrochemical applications due to its reported large electrical conductivity, large surface area, unique heterogeneous electron transfer rate, and low production costs. This work reports the synthesis of GR using a modified Brodie method and its application for the electrochemical determination of l-dopa in real samples. Electrochemical measurements were performed at glassy carbon electrode modified with graphene (GR/GCE) via drop casting method. Cyclic voltammograms of l-dopa at GR/GCE showed an increased current intensity compared with GCE. All the measurements were done in phosphate buffer solution 0.1 M (pH 6.2) and the oxidation peak was observed at 0.27 V vs. Ag/AgCl. The effect of scan rate showed that oxidation of l-dopa on GR/GCE was surface controlled. The oxidation peak current of l-dopa gradually increased with increasing accumulation time from 0 to 300 s and accumulation potential from 0.0 to 0.3 V and reached the maximum current response at 240 s and 0.2 V for the accumulation time and accumulation potential, respectively. Voltammetric peak currents showed a linear response for l-dopa concentration in the range of 0.04 to 79 μM and a detection limit of 0.022 μM (22 nM). The relative standard deviation for five determinations of 50 μM l-dopa was 0.52 %.     

A carbon paste electrode modified with a cobalt(II) coordination polymer for the direct voltammetric determination of tryptophan

We have synthesized a cobalt(II) coordination polymer and have characterized it by various methods including X-ray single crystal structural analysis. The polymer was used as modifier to fabricate a carbon paste electrode that displays electrochemical activity towards tryptophan (Trp). Trp is oxidized at the surface of the electrode in buffer solution of pH 4.2, yielding a single peak at 814 mV. The experimental conditions such as the concentration, the composition and the pH values of the supporting electrolyte, accumulation time, and the scan rate were optimized. Under the optimized conditions, the current of peak is linearly related to the concentration of Trp in the range from 0.2 to 8.0 μM, and from 8.0 to 80.0 μM. The detection limit (at S/N?=?3) is 0.1 μM at an accumulation time of 60 s. The determination of Trp in amino acid injection solutions was evaluated and the results were satisfactory. The recoveries were in the range of 97.5% to 103.0%.

Immunoaffinity chromatographic isolation of prostate-specific antigen from seminal plasma for capillary electrophoresis analysis of its isoforms

Prostate-specific antigen (PSA) concentration in serum has been the biomarker employed for prostate cancer diagnosis in the last two decades. However, new more specific biomarkers allowing a better differentiation of cancer from non-malignant prostate diseases are necessary. Glycosylation of PSA gives rise to different forms of the protein which can be separated into several isoforms by analytical techniques, such as CE. Because PSA glycosylation is influenced by pathological conditions, the CE pattern of PSA isoforms could be different in prostate cancer than in non-malignant prostate diseases. To study this CE pattern of PSA, prior purification of the protein from the biological fluid is mandatory. In this study an immunoaffinity chromatography method which allows PSA purification without altering the CE pattern is developed. An in-house prepared column produced with commercial anti-PSA antibodies is employed. The use of 1 M propionic acid as elution agent provides higher than 40% recovery of high purity PSA. CE analysis of PSA immunopurified from seminal plasma of a healthy individual shows the same 8 peaks as the commercially available PSA standard. Sample preparation only requires dilution with phosphate buffered saline prior to immunoaffinity purification. High repeatability for the sample preparation step was achieved (RSD% for percentage of corrected peak area in the range 0.6–5.3 for CE analysis of three independently purified seminal plasma aliquots compared to range 0.8–4.9 for a given aliquot analyzed three times by CE). IAC of five microliters seminal plasma provided enough PSA to achieve signal/noise ratio larger than 5 for the smallest CE isoforms.     

Analysis of native and APTS-labeled N-glycans by capillary electrophoresis/time-of-flight mass spectrometry

The glycosylation of proteins is of particular interest in biopharmaceutical applications. The detailed characterization of glycosylation based on the released carbohydrates is mandatory since the protein stability, folding, and efficacy are strongly dependent on the structural diversity inherent in the glycan moieties of a glycoprotein. For glycan pattern analysis, capillary electrophoresis with laser-induced fluorescence using 8-aminopyrene-1,3,6-trisulfonic acid (APTS)-labeled glycans is used frequently. In this paper, a robust capillary electrophoresis–mass spectroscopy method both for the analysis of APTS-labeled glycans and unlabeled charged glycans is presented. The background electrolyte consists of 0.7 M ammonia and 0.1 M ε-aminocaproic acid in water/methanol 30:70 (v/v). High separation efficiency including separation of structural isomers was obtained. The method was validated in terms of reproducibility and linearity. Submicromolar sensitivity is achieved with linearity up to 24 μM. The ability to analyze APTS-labeled, as well as unlabeled, charged glycans enables the determination of labeling and ionization efficiency: APTS-labeled glycans show a factor of three better ionization efficiency compared to non-labeled native glycans. The presented method is applied to the analysis of pharmaceutical products. Furthermore, the system can be applied to the analysis of 2-ANSA-labeled glycans, though separation efficiency is limited.

Pre-concentration and quantification of aluminum in fish samples using a dispersive liquid–liquid micro-extraction–spectrofluorimetric method based on Al(III)–8-hydroxyquinoline complex’s fluorescence properties

A simple and fast dispersive liquid–liquid micro-extraction (DLLME)–spectrofluorimetric technique was developed and validated for the extraction and quantification of trace amounts of Al in fish samples, where 8-hydroxyquinoline was utilized as a spectrofluorimetric probe. In order to optimize the efficacy of the DLLME technique, the impact of experimental parameters on the extraction of Al(III) from fish samples was evaluated. Under the optimal conditions, the method was linear in the concentration range of 0.1–7.0 μg/g (r = 0.9996) with a LOD of 0.092 μg/g; additionally, the method was accurate (RE% of ? 3.0 to + 10.0%), precise (RSD% of 1.2–14.3%) and robust (RSD% of 3.8 and p value of 0.21) and its recovery was in the range of 97.0 ± 3.89–110.0 ± 12.5%; moreover, samples were stable before and during the analyses. Therefore, it can be claimed that the developed method could be successfully applied for the quantification of Al in fish samples.     

Applications of CE SDS gel in development of biopharmaceutical antibody-based products

CE SDS gel technique offers many advantages over the traditional labor-intensive SDS PAGE slab gel technology. The CE-based method has increasingly been applied to many protein analysis applications. Specific examples are provided for monoclonal antibody (mAb), though the technique can be adapted to many other therapeutic protein products. Applications of CE SDS gel method using Beckman PA800 with UV detection are presented and discussed with respect to mAb analysis, such as purity, quantitation of non-glycosylated heavy chain (NGHC) peak, identity, and stability. The stability of mAb is evaluated with respect to formulation buffer, accelerated temperature stress, UV light-exposure, and high pH conditions. Both reducing and non-reducing CE SDS gel conditions were applied and optimized to characterize mAb products. The data presented provides a "taste" of what CE SDS gel method can do to support the development of mAb products from early clone screening for product quality to the final product characterization. Since the CE SDS gel method is automatable, quantitative, robust, and allows for relatively high throughput, it provides both great analytical capacity and product coverage for a wide spectrum of protein product development in biopharmaceutical industry.     

Simultaneous Chiral Separation of Geometry Isomers and Enantiomers of Nateglinide by Capillary Electrophoresis with Mixture of CD Derivations as Chiral Selector

Abstract

A capillary electrophoresis (CE) method for the simultaneous separation of geometry isomers and enantiomers of nateglinide was built. Several different dyclodextrin (CD) derivatives were tested for the chiral separation of nateglinide, and it was proved that ionic CDs [i.e., carboxymethy-β-CD (CM-β-CD) and sulphonic-β-CD (S-β-CD)] could show better chiral selectivity for both geometry isomers and enantiomers than the neutral CDs. The separation of geometry of both isomers and enantiomers of nateglinide was obtained by CE in a 75-µm i.d. × 60 cm (effective length 45 cm) fused-silica capillary at 11 kV voltage, while 30 mM phosphate (pH = 8.38) acted as running buffer and a mixture of 40 mM S-β-CD + 21 mM CM-β-CD served as chiral selector. The detective wavelength was set at 254 nm.     

Complexation and thermodynamic studies of oxathiadibenzocrown ethers with Cu2+, Pb2+, Zn2+ and Cd2+ ions

A thermodynamic study of the complexation of Cu²⁺, Pb²⁺, Zn²⁺ and Cd²⁺ ions with 1 and 2 in acetonitrile has been carried out. The study was conducted in the temperature range 283–308 K using a conductometric technique. The observed molar conductivity, Λ, was found to decrease significantly for mole ratios [L]_t/[M]_t less than unity in all cases. A model involving 1:1 stoichiometry has been used to analyze the conductivity data. The stability constant, K, for each 1:1 complex was determined from the conductivity data by using a nonlinear least-squares curve fitting procedure. The results show that compound 1 has no peak selectivity for any of the metal cations, while compound 2 selectively associates with Cu²⁺ and Pb²⁺. Complexes of 1 have the following stability order Pb²⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺  and Pb²⁺ > Cu²⁺ for the complexes of 2. The ?H° and ?S° values for the complexation process were obtained from the slope and intercept of the Van’t Hoff plots respectively. All ?G° values were negative and were determined from the Gibbs–Helmholtz equation and the significance of these values is discussed.     

Engineering <Emphasis Type="Italic">Pichia pastoris</Emphasis> for Efficient Production of a Novel Bifunctional <Emphasis Type="Italic">Strongylocentrotus purpuratus</Emphasis> Invertebrate-Type Lysozyme

Lysozymes are known as ubiquitously distributed immune effectors with hydrolytic activity against peptidoglycan, the major bacterial cell wall polymer, to trigger cell lysis. In the present study, the full-length cDNA sequence of a novel sea urchin Strongylocentrotus purpuratus invertebrate-type lysozyme (sp-iLys) was synthesized according to the codon usage bias of Pichia pastoris and was cloned into a constitutive expression plasmid pPIC9K. The resulting plasmid, pPIC9K-sp-iLys, was integrated into the genome of P. pastoris strain GS115. The bioactive recombinant sp-iLys was successfully secreted into the culture broth by positive transformants. The highest lytic activity of 960 U/mL of culture supernatant was reached in fed-batch fermentation. Using chitin affinity chromatography and gel-filtration chromatography, recombinant sp-iLys was produced with a yield of 94.5 mg/L and purity of >?99%. Recombinant sp-iLys reached its peak lytic activity of 8560 U/mg at pH 6.0 and 30 °C and showed antimicrobial activities against Gram-negative bacteria (Vibrio vulnificus, Vibrio parahemolyticus, and Aeromonas hydrophila) and Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis). In addition, recombinant sp-iLys displayed isopeptidase activity which reached the peak at pH 7.5 and 37 °C with the presence of 0.05 M Na⁺. In conclusion, this report describes the heterologous expression of recombinant sp-iLys in P. pastoris on a preparative-scale, which possesses lytic activity and isopeptidase activity. This suggests that sp-iLys might play an important role in the innate immunity of S. purpuratus.     

A Multivariate Approach to Evaluate Biomass Production,Biochemical Composition and Stress Compounds of <Emphasis Type="Italic">Spirulina platensis</Emphasis> Cultivated in Wastewater

The study was performed to investigate the effects of using cow effluent for the cultivation of Spirulina platensis on its biomass production and cell physiology. S. platensis was cultivated in three different cow effluents (CE) used as cultivation medium during 15 days. CE was prepared using dry cow manures, and it was further modified with supplement of NaNO₃ (CEN) and NaNO₃ + NaCl (CENS). High nitrate value stimulated chlorophyll-a and total protein content of the cyanobacterium and also biomass production in standards medium (SM) and CEN media. Total carbohydrate content of S. platensis grown in CE media was found to be higher (p < 0.05) than that of SM. Productions of biomass and biochemical compounds by the cyanobacterium grown on the CE and SM media were evaluated by using multivariate approach. Conductivity, oxidation reduction potential (ORP), salinity, pH, and TDS played important role (p < 0.01) in the biochemical composition. As an effective explanatory factor, ORP had a significant positive correlation with H₂O₂, whereas negatively correlated with chlorophyll-α, biomass production, filament length, and proline. Canonical correspondence analysis proposed that biochemical compounds of S. platensis were not only affected by salinity and nutrition of media but also by pH and ORP. The present study indicated that CEN as a low cost model medium had high potential for the production of biomass by S. platensis with high protein content.     

High-throughput capillary electrophoresis analysis of biopharmaceuticals utilizing sequential injections

The complexity of biotherapeutic products implies an ever-increasing list of product quality attributes that need to be monitored and characterized. In addition, the growing interest in implementing process analytical technology in biopharmaceutical production has further increased the testing burden, together with the need for rapid testing that can facilitate real-time or near-real-time decision-making. Capillary electrophoresis (CE) has made a place in biopharmaceutical analysis but is regarded as a low-throughput method, with the instrument dead time constituting more than 80% of the total time of analysis. In this study, the dead time of CE was utilized to analyse 3 mAb samples in a single-CE run. This approach resulted in an up to 77% reduction in the total analysis time and increased the productivity by up to 300%, compared to traditional single CE-ultraviolet runs, without compromising resolution or relative peak areas. Additionally, good method reproducibility was observed. The compatibility of the method has been demonstrated with protein A eluate and cation exchange chromatography fractions. We, thus, propose that sequential injections can be applied for fast and robust CE analysis of biopharmaceuticals.