Interfacial Engineering for Oriented Crystal Growth toward Dendrite-Free Zn Anode for Aqueous Zinc Metal Battery

Zn deposition with a surface-preferred (002) crystal plane has attracted extensive attention due to its inhibited dendrite growth and side reactions. However, the nucleation and growth of the Zn(002) crystal plane are closely related to the interfacial properties. Herein, oriented growth of Zn(002) crystal plane is realized on Ag-modified surface that is directly visualized by in situ atomic force microscopy. A solid solution HCP-Zn (~1.10 at. % solubility of Ag, 30 °C) is formed on the Ag coated Zn foil (Zn@Ag) and possesses the same crystal structure as Zn to reduce its nucleation barrier caused by their lattice mismatch. It merits oriented Zn deposition and corrosion-resistant surface, and presents long cycling stability in symmetric cells and full cells coupled with V₂O₅ cathode. This work provides insights into interfacial regulation of Zn anodes for high-performance aqueous zinc metal batteries.     

Reversible Zn Metal Anodes Enabled by Trace Amounts of Underpotential Deposition Initiators

Routine electrolyte additives are not effective enough for uniform zinc (Zn) deposition, because they are hard to proactively guide atomic-level Zn deposition. Here, based on underpotential deposition (UPD), we propose an “escort effect” of electrolyte additives for uniform Zn deposition at the atomic level. With nickel ion (Ni²⁺) additives, we found that metallic Ni deposits preferentially and triggers the UPD of Zn on Ni. This facilitates firm nucleation and uniform growth of Zn while suppressing side reactions. Besides, Ni dissolves back into the electrolyte after Zn stripping with no influence on interfacial charge transfer resistance. Consequently, the optimized cell operates for over 900 h at 1 mA cm⁻² (more than 4 times longer than the blank one). Moreover, the universality of “escort effect” is identified by using Cr³⁺ and Co²⁺ additives. This work would inspire a wide range of atomic-level principles by controlling interfacial electrochemistry for various metal batteries.     

Dendrite-free and anti-corrosion Zn metal anode enabled by an artificial layer for high-performance Zn ion capacitor

Aqueous zinc energy storage devices, holding various merits such as high specific capacity and low costs, have attracted extensive attention in recent years. Nevertheless, Zn metal anodes still suffer from a short lifespan and low Coulombic efficiency due to corrosion and side reactions in aqueous electrolytes. In this paper, we construct an artificial Sn inorganic layer on Zn metal anode through a facile strategy of atom exchange. The Sn layer suppresses Zn dendrite growth by facilitating homogeneous Zn plating and stripping during charge and discharge processes. Meanwhile, the Sn protective layer also serves as a physical barrier to decrease Zn corrosion and hydrogen generation. As a result, The Sn-coated anode (Sn|Zn) exhibits a low polarization voltage (～34 mV at 0.5 mAh/cm²) after 800 testing hours and displays a smooth and an even surface without corrosion. Moreover, the zinc ion capacitor (Sn|Zn||activated carbon) is assembled with an enhanced capacity of 42 mAh/g and a capacity retention of 95% after 10,000 cycles at 5 A/g. This work demonstrates a feasible approach for the commercialization of aqueous Zn-based energy storage devices.     

Synchronous Dual Electrolyte Additive Sustains Zn Metal Anode with 5600 h Lifespan

Despite conspicuous merits of Zn metal anodes, the commercialization is still handicapped by rampant dendrite formation and notorious side reaction. Manipulating the nucleation mode and deposition orientation of Zn is a key to rendering stabilized Zn anodes. Here, a dual electrolyte additive strategy is put forward via the direct cooperation of xylitol (XY) and graphene oxide (GO) species into typical zinc sulfate electrolyte. As verified by molecular dynamics simulations, the incorporated XY molecules could regulate the solvation structure of Zn²⁺, thus inhibiting hydrogen evolution and side reactions. The self-assembled GO layer is in favor of facilitating the desolvation process to accelerate reaction kinetics. Progressive nucleation and orientational deposition can be realized under the synergistic modulation, enabling a dense and uniform Zn deposition. Consequently, symmetric cell based on dual additives harvests a highly reversible cycling of 5600 h at 1.0 mA cm⁻²/1.0 mAh cm⁻².     

Dendrite‐Free Nanocrystalline Zinc Electrodeposition from an Ionic Liquid Containing Nickel Triflate for Rechargeable Zn‐Based Batteries

Metallic zinc is a promising anode material for rechargeable Zn‐based batteries. However, the dendritic growth of zinc has prevented practical applications. Herein it is demonstrated that dendrite‐free zinc deposits with a nanocrystalline structure can be obtained by using nickel triflate as an additive in a zinc triflate containing ionic liquid. The formation of a thin layer of Zn–Ni alloy (η‐ and γ‐phases) on the surface and in the initial stages of deposition along with the formation of an interfacial layer on the electrode strongly affect the nucleation and growth of zinc. A well‐defined and uniform nanocrystalline zinc deposit with particle sizes of about 25 nm was obtained in the presence of Ni^II. Further, it is shown that the nanocrystalline Zn exhibits a high cycling stability even after 50 deposition/stripping cycles. This strategy of introducing an inorganic metal salt in ionic liquid electrolytes can be considered as an efficient way to obtain dendrite‐free zinc.     

High ionic conductive protection layer on Zn metal anode for enhanced aqueous zinc-ion batteries

Aqueous zinc-ion batteries (ZIBs) has been regarded as a promising energy storage system for large-scale application due to the advantages of low cost and high safety. However, the growth of Zn dendrite, hydrogen evolution and passivation issues induce the poor electrochemical performance of ZIBs. Herein, a Na₃Zr₂Si₂PO₁₂ (NZSP) protection layer with high ionic conductivity of 2.94 mS/cm on Zn metal anode was fabricated by drop casting approach. The protection layer prevents Zn dendrites formation, hydrogen evolution as well as passivation, and facilitates a fast Zn²⁺ transport. As a result, the symmetric cells based on NZSP-coated Zn show a stable cycling over 1360 h at 0.5 mA/cm² with 0.5 mAh/cm² and 1000 h even at a high current density of 5 mA/cm² with 2 mAh/cm². Moreover, the full cells combined with V₂O₅-based cathode displays high capacities and high rate capability. This work offers a facile and effective approach to stabilizing Zn metal anode for enhanced ZIBs.     

Electrical-Conductive/Insulating Bi-Functional Layers for Stable Zn Metal Anode

Zinc-ion batteries are regarded as an extremely promising candidate for large-scale energy storage equipment due to the inexpensive ingredients and high safety. However, dendrite growth and side reactions occur in the Zn anode, which lead to exceedingly low coulombic efficiency (CE) and poor cycling stability. In this work, we propose a strategy of a conductive/insulating bi-functional coating layer (CIBL) for stable Zn metal anodes. Porous Ag nanowires (NWs) coating as a conductive layer effectively reduces the nuclear barrier and contains Zn²⁺ deposition in a certain space. Polyimide (PI) coatings as insulating layer implement a shunting effect on Zn²⁺, which could reduce the differential concentration on the Zn surface and induce uniform deposition of Zn²⁺. Therefore, the CIBL−Zn//CIBL−Zn battery achieves stable plating/stripping of over 1300 h at 1 mA cm⁻². The CE of CIBL−Zn//CIBL−Zn battery maintains at 99.2 % even after 1000 cycles. Moreover, the CIBL−Zn//V₂O₅ battery exhibits a capacity of nearly 289.2 mA h g⁻¹ at 5 A g⁻¹ after 3000 cycles and no sign of capacity degradation is found, which further demonstrate the feasibility of this strategy in practical application.     

An Unprecedented Interpenetrating Structure Built from Two Differently Bonded Frameworks: Synthesis,Characteristics, and Efficient Removal of Anionic Dyes from Aqueous Solutions

The first example of one single crystal (NTOU-5) containing two different organic-inorganic hybrid open-framework structures was obtained using a hydro(solvo)thermal method and structurally characterized by single-crystal X-ray diffraction. Remarkably, under the same synthetic conditions, the zinc ions are respectively coordinated by oxalic acid (OX) and 1,2,4,5-tetrakis(imidazol-1-ylmethyl)benzene (TIMB) linkers to form two significantly different frameworks: anionic [Zn₂(OX)₃]²⁻ and cationic [Zn(TIMB)]²⁺ networks that interweave with each other to give an unprecedented interpenetrating structure with two differently-bonded open-frameworks. From the inorganic chemistry perspective, it is extremely difficult to control to which metal center the oxygen-donor linkers or/and nitrogen-donor ligands bind. A mixed Co/Zn analogue was also obtained by a similar method. The single-crystal XRD and EDS analyses indicate that the octahedral Zn ions of the anionic framework are replaced by cobalt cations, whereas the Zn ions in the tetrahedral positions of the cationic networks remain intact. This leads to the formation of the interpenetrating analogue with a mixed metal composition. Furthermore, NTOU-5 shows structural stability and efficiently removes organic dyes from aqueous solutions at concentrations of 10 ppm.     

Surface-tuned two-dimension MXene scaffold for highly reversible zinc metal anode

Zinc metal has aroused increasing interest as anode material of Zn-based batteries for their energy storage application. However, the uneven Zn stripping/plating processes induce severe dendrite growth, leading to low Coulombic efficiency and safety hazards. Herein, a surface-tuned two-dimensional (2D) MXene Ti₃C₂T_x scaffold as a robust skeleton is developed to facilitate the uniform Zn stripping/plating. The Ti₃C₂T_x with high electrical conductivity and unique structure provides fast ionic-transport paths, promising even Zn²⁺ stripping/plating processes. With suppressed Zn dendrite growth and uniform nucleation, the proposed 2D Ti₃C₂T_x scaffold for Zn metal anode delivers a low voltage hysteresis of 63 mV and long lifespan over 280 h. This surface-tuned engineering strategy demonstrates the potential application of Zn anode with MXene skeleton for next-generation Zn-based batteries.     

ZnF2-Riched Inorganic/Organic Hybrid SEI: in situ-Chemical Construction and Performance-Improving Mechanism for Aqueous Zinc-ion Batteries

Uncontrolled dendrites growth and serious parasitic reactions in aqueous electrolytes, greatly hinder the practical application of aqueous zinc-ion battery. On the basis of in situ-chemical construction and performance-improving mechanism, multifunctional fluoroethylene carbonate (FEC) is introduced into aqueous electrolyte to construct a high-quality and ZnF₂-riched inorganic/organic hybrid SEI (ZHS) layer on Zn metal anode (ZMA) surface. Notably, FEC additive can regulate the solvated structure of Zn²⁺ to reduce H₂O molecules reactivity. Additionally, the ZHS layer with strong Zn²⁺ affinity can avoid dendrites formation and hinder the direct contact between the electrolyte and anode. Therefore, the dendrites growth, Zn corrosion, and H₂ evolution reaction on ZMA in FEC-included ZnSO₄ electrolyte are highly suppressed. Thus, ZMA in such electrolyte realize a long cycle life over 1000 h and deliver a stable coulombic efficiency of 99.1 % after 500 cycles.     

Synthesis and characterization of novel Cd(II), Zn(II) and Ni(II) complexes with 2-quinolinecarboxaldehyde selenosemicarbazone. Crystal structure of bis(2-quinolinecarboxaldehyde selenosemicarbazonato)nickel(II)

New complexes of Cd(II), Zn(II) and Ni(II) with 2-quinolinecarboxaldehyde selenosemicarbazone (Hqasesc) were synthesized and structurally characterized. The structure of the ligand, Cd(II) and Zn(II) complexes was determined by NMR and IR spectroscopy, elemental microanalysis and molar conductivity measurements. Both complexes occur in solution in two forms, the major tetrahedral and minor octahedral. In the major Cd(II) complex one qasesc⁻ ligand is coordinated as a tridentate, the fourth coordination site being occupied by acetate, while in the major Zn(II) complex two qasesc⁻ ligands are coordinated as bidentates. In both minor complexes two qasesc⁻ ligands are coordinated as tridentates forming the octahedral geometry around the central metal ion. The only paramagnetic complex in the series is Ni(II) complex for which X-ray structure analysis was performed. The complex has the angularly distorted octahedral geometry with two qasesc⁻ ligands coordinated as tridentates, in a similar way as in the minor complexes of Cd(II) and Zn(II).     

Synthesis,characterization and antimicrobial activity of a new macrocycle and its transition metal complexes

The semicarbazone (L¹) has been prepared by reaction of semicarbazide and glutaraldehyde (2 : 1) in distilled water and methanol (1 : 1). The reaction of semicarbazide, glutaraldehyde and diethyl oxalate in distilled water and methanol gave Schiff-base L², 1,2,4,7,9,10-hexaazacyclo-pentadeca-10,15-dien-3,5,6,8-tetraone. Complexes of first row transition metal ions Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) have also been synthesized. The ligand and its complexes were characterized by elemental analysis, molar conductance, magnetic moment measurements, IR, ¹H NMR, UV–Visible spectra and thermogravimetric analysis (TGA). Molar conductance values show that the complexes of Ni(II), Cu(II), Zn(II), Mn(II) and Co(II) are 1 : 2 electrolytes. On the basis of electronic spectral studies and molar conductance measurements an octahedral structure has been proposed for Mn(II) and Co(II) complexes, tetrahedral for Zn(II) complex and square planar for Ni(II) and Cu(II). The thermal behavior of the compounds, studied by TGA in a nitrogen atmosphere up to 800°C, reveal that the complexes have higher thermal stability than the macrocycle. All the synthesized compounds and standard drugs kanamycin (antibacterial) and miconazole (antifungal) have been screened against bacterial strains Staphylococcus areus, Escherichia coli and fungal strains Candida albicans, Aspergillus niger. The metal complexes inhibit growth of bacteria to a greater extent than the ligand.     

Three new mononuclear group 12 complexes with benzimidazole

Three iso-structural Zn(II), Cd(II), and Hg(II) complexes with 1-benzyl-2-phenyl-1H-benzimidazole (BPB), ZnBPB, CdBPB, and HgBPB, respectively, were synthesized by reaction of the ligand with the corresponding metal chlorides in methanolic solutions. The complexes [MCl₂(BPB)₂], where M?=?Zn(II), Cd(II), or Hg(II), were characterized by elemental analysis, ¹³C, ¹H, and [¹H–¹⁵N] heteronuclear multiple bond coherence NMR measurements, and Raman spectroscopy. The structures of the cadmium and mercury complexes were solved by single-crystal X-ray diffraction, while the structure of the zinc complex was determined by X-ray powder diffraction. The three compounds crystallize in the triclinic system in P-1 space group with the metal ions lying in a distorted tetrahedral environment. The zinc complex shows high luminescence in the solid state at room temperature.     

Synthesis of metal complexes with 2-[bis(2-phenylethyl)-thiophophorylhydroxymethyl]-1-organilimidazoles. Crystal structure of ZnCl2 · 2L

The reactions of Zn(II), Cd(II), Cu(II), Co(II), Pd(II) dichlorides with 2-[bis(2-phenylethyl)thiophosphorylhydroxymethyl]-1-organilimidazoles (L¹–L⁴) were studied. The novel complexes were synthesized and characterized by IR and NMR spectroscopies. Depending on the nature of imidazolephosphinesulfide, both monodentate (at the “pyridine” N(1) atom of heterocycle) and the N,S-bidentate binding of the ligand by a metal can be realized in the above metal complexes. The structure of the complex ZnCl₂ · 2L⁴(I) (L⁴ = 2-[bis(2-phenylethyl)thiophosphorylhydroxymethyl]-1-ethylbenzimidazole) was studied by X-ray diffraction. One of the two independent L⁴ molecules performs the solvate function, while another one, together with two Cl atoms, is coordinated through the atoms N(1) and S to the Zn atom at the vertices of a slightly distorted tetrahedron. The molecule of the complex is united with the solvate molecule into [ZnCl₂L₄]L⁴ associates by strong intermolecular hydrogen bonds to give nonplanar four-membered H-cycle OH₂N.     

Synergic Effect of Active Sites in Zinc‐Modified ZSM‐5 Zeolites as Revealed by High‐Field Solid‐State NMR Spectroscopy

Understanding the nature of active sites in metal‐supported catalysts is of great importance towards establishing their structure–property relationships. The outstanding catalytic performance of metal‐supported catalysts is frequently ascribed to the synergic effect of different active sites, which is however not well spectroscopically characterized. Herein, we report the direct detection of surface Zn species and ¹H–⁶⁷Zn internuclear interaction between Zn²⁺ ions and Brønsted acid sites on Zn‐modified ZSM‐5 zeolites by high‐field solid‐state NMR spectroscopy. The observed promotion of C?H bond activation of methane is rationalized by the enhanced Brønsted acidity generated by synergic effects arising from the spatial proximity/interaction between Zn²⁺ ions and Brønsted acidic protons. The concentration of synergic active sites is determined by ¹H–⁶⁷Zn double‐resonance solid‐state NMR spectroscopy.     

New Multifunctional Porous Materials Based on Inorganic–Organic Hybrid Single‐Walled Carbon Nanotubes: Gas Storage and High‐Sensitive Detection of Pesticides

Single‐walled carbon nanotubes (SWNTs) that are covalently functionalized with benzoic acid (SWNT‐PhCOOH) can be integrated with transition‐metal ions to form 3D porous inorganic–organic hybrid frameworks (SWNT‐Zn). In particular, N₂‐adsorption analysis shows that the BET surface area increases notably from 645.3 to 1209.9 m² g^?1 for SWNTs and SWNT‐Zn, respectively. This remarkable enhancement in the surface area of SWNT‐Zn is presumably due to the microporous motifs from benzoates coordinated to intercalated zinc ions between the functionalized SWNTs; this assignment was also corroborated by NLDFT pore‐size distributions. In addition, the excess‐H₂‐uptake maximum of SWNT‐Zn reaches about 3.1 wt. % (12 bar, 77 K), which is almost three times that of the original SWNTs (1.2 wt. % at 12 bar, 77 K). Owing to its inherent conductivity and pore structure, as well as good dispersibility, SWNT‐Zn is an effective candidate as a sensitive electrochemical stripping voltammetric sensor for organophosphate pesticides (OPs): By using solid‐phase extraction (SPE) with SWNT‐Zn‐modified glassy carbon electrode, the detection limit of methyl parathion (MP) is 2.3 ng mL^?1.     

Constructing a Super-Saturated Electrolyte Front Surface for Stable Rechargeable Aqueous Zinc Batteries

Rechargeable aqueous zinc batteries (RAZB) have been re-evaluated because of the superiority in addressing safety and cost concerns. Nonetheless, the limited lifespan arising from dendritic electrodeposition of metallic Zn hinders their further development. Herein, a metal–organic framework (MOF) was constructed as front surface layer to maintain a super-saturated electrolyte layer on the Zn anode. Raman spectroscopy indicated that the highly coordinated ion complexes migrating through the MOF channels were different from the solvation structure in bulk electrolyte. Benefiting from the unique super-saturated front surface, symmetric Zn cells survived up to 3000 hours at 0.5 mA cm⁻², near 55-times that of bare Zn anodes. Moreover, aqueous MnO₂–Zn batteries delivered a reversible capacity of 180.3 mAh g⁻¹ and maintained a high capacity retention of 88.9 % after 600 cycles with MnO₂ mass loading up to 4.2 mg cm⁻².     

Electrochemical deposition of Zn on TiN microelectrode arrays for microanodes

Zn was electrochemically deposited onto square TiN electrodes with edge dimensions of 490 μm and 40 μm. These were fabricated by standard microfabrication techniques, which provide an extremely reproducible electrode for experimentation. Reliable constant-potential electrodeposition of Zn on the TiN was performed at −1.2 V, just below the Zn/Zn²⁺ redox potential. At more negative potentials, the hydrogen evolution reaction on TiN interfered with bulk metal electrodeposition, resulting in poor quality Zn films. A two-step plating procedure was shown to be most efficient for electrochemical deposition of Zn, with Zn nucleation on the TiN substrate at high cathodic overpotential during the first step and a second step of bulk metal growth on the nucleated layer at low cathodic overpotential. These results were most consistent with 3D progressive nucleation of Zn on the TiN surface. Using this procedure, deposits of Zn on 490 μm TiN electrodes were uniform. In contrast, Zn deposits on 40 μm electrodes formed high-surface area and volume surface structures resulting from preferential growth at the electrode corners due to enhanced hemispherical diffusion at these sites. This should enable the formation of high surface area, high current density Zn anodes on biocompatible TiN microelectrodes, which could find application as improved microanodes for implantable miniature power supplies, e.g., implantable glucose sensors and internal cardioverter defibrillators.     

Polycation-Regulated Electrolyte and Interfacial Electric Fields for Stable Zinc Metal Batteries

Zn metal as one of promising anode materials for aqueous batteries but suffers from disreputable dendrite growth, grievous hydrogen evolution and corrosion. Here, a polycation additive, polydiallyl dimethylammonium chloride (PDD), is introduced to achieve long-term and highly reversible Zn plating/stripping. Specifically, the PDD can simultaneously regulate the electric fields of electrolyte and Zn/electrolyte interface to improve Zn²⁺ migration behaviors and guide dominant Zn (002) deposition, which is veritably detected by Zeta potential, Kelvin probe force microscopy and scanning electrochemical microscopy. Moreover, PDD also creates a positive charge-rich protective outer layer and a N-rich hybrid inner layer, which accelerates the Zn²⁺ desolvation during plating process and blocks the direct contact between water molecules and Zn anode. Thereby, the reversibility and long-term stability of Zn anodes are substantially improved, as certified by a higher average coulombic efficiency of 99.7 % for Zn||Cu cells and 22 times longer life for Zn||Zn cells compared with that of PDD-free electrolyte.     

A study of bismuth-film electrodes for the detection of trace metals by anodic stripping voltammetry and their application to the determination of Pb and Zn in tapwater and human hair

This work reports the simultaneous determination of Cd(II), Pb(II) and Zn(II) at the low μg l⁻¹ concentration levels by square wave anodic stripping voltammetry (SWASV) on a bismuth-film electrode (BFE) plated in situ. The metal ions and bismuth were simultaneously deposited by reduction at −1.4 V on a rotating glassy carbon disk electrode. Then, the preconcentrated metals were oxidised by scanning the potential of the electrode from −1.4 to 0 V using a square-wave waveform. The stripping current arising from the oxidation of each metal was related to the concentration of each metal in the sample. The parameters for the simultaneous determination of the three metals were investigated with the view to apply this type of voltammetric sensor to real samples containing low concentrations of metals. Using the selected conditions, the limits of detection were 0.2 μg l⁻¹ for Cd and for Pb and 0.7 μg l⁻¹ for Zn at a preconcentration time of 10 min. Finally, BFE's were successfully applied to the determination of Pb and Zn in tapwater and human hair and the results were in satisfactory statistical agreement with atomic absorption spectroscopy (AAS).