Real-time observation of temperature-dependent protein-protein interactions using real-time dual-color detection system

This study examined the ability of a real-time dual-color detection system to allow direct observations of the kinetics of temperature-dependent protein-protein interaction at a single-molecule level. The primary target protein was an Alexa Fluor^® 488-labeled actin conjugate, which had been pre-incubated with an unlabeled rabbit anti-actin antibody (IgG). The complementary fluorescent protein was Alexa Fluor^® 633-labeled goat anti-rabbit IgG antibody, which interacts with the rabbit anti-actin antibody (IgG) bound to the Alexa Fluor^® 488-labeled actin conjugate. The individual protein molecules labeled with different fluorescent dyes in solution were effectively focused, interacted with the other protein molecules at 500 aM, and detected directly in real-time using the dual-wavelength (λ_ex = 488 and 635 nm) laser-induced fluorescence detection system. The kinetics of the protein-protein interactions were examined at different temperatures (12-32 °C). At concentrations in the aM range, the number of bound complex molecules through the protein-protein interaction decreased gradually with time at a given temperature, and increased with decreasing temperature at a set time. A high concentration (above 500 pM) of the protein sample caused aggregation and nonspecific binding of the protein molecules, even though the protein molecules were not an example of complementary binding. The results demonstrated that the real-time kinetics of a protein-protein interaction could be analyzed effectively at the single-molecule level without any time delay using the real-time dual-color detection system.     

Simultaneous High Throughput Single Molecule Electrophoresis and Single Molecule Spectroscopy

Single molecule detection (SMD) has developed rapidly in recent years, especially high-throughput single molecule detection. Such research facilitated several fundamental studies at the single molecule level. In the fixture, SMD may be successfully applied to biological, clinical and medical research for DNA sequencing and single-molecule scans for disease detection. Presently, single-molecule identification of DNA and proteins is performed using fluorescence intensity, mobility or hybridization with a selective probe. In some cases, such methods are insufficient for confident single-molecule identification. Therefore, we invented a high-throughput combination single-molecule spectroscopy/imaging technique for monitoring the spectroscopic differences of several different individual molecules while they migrate in solution. The technique can offer three-dimensional data for each molecule:mobility, fluorescence intensity and spectroscopy information. Two sample systems were selected as test cases. In the first case, λ DNA is labeled with YOYO-Ⅰ,POPO-Ⅲ and a combination of the two dyes. Many individual λ DNA molecules are simultaneously imaged and identified by their spectroscopic differences. In the second case, a biotinylated 2.1 kb PCR product (also labeled with YOYO-Ⅰ) was reacted with avidin-conjugated R-phycoerythrin. The individual reactants and products are also simultaneously imaged and identified by their spectroscopic differences. This technique can be used for high-throughput DNA screening, molecular identification and monitoring intermolecular interactions with a speed of over 2,000,000 molecules per second. The existing method is the highest and most powerful single-molecule screening method available to date. Such technology is expected to have a great impact on single-molecule diagnosis and monitoring molecular interaction at the single molecule level and will be beneficial to early detection and diagnosis of disease (e.g. cancer, HIV). Furthermore, this technique allows one to directly observe and evaluate the data without any complicated calculations.     

Monitoring molecular beacon DNA probe hybridization at the single-molecule level

We have monitored the reaction dynamics of the DNA hybridization process on a liquid/solid interface at the single-molecule level by using a hairpin-type molecular beacon DNA probe. Fluorescence images of single DNA probes were recorded by using total internal reflection fluorescence microscopy. The fluorescence signal of single DNA probes during the hybridization to individual complementary DNA probes was monitored over time. Among 400 molecular beacon DNA probes that we tracked, 349 molecular beacons (87.5 %) were hybridized quickly and showed an abrupt fluorescence increase, while 51 probes (12.5 %) reacted slowly, resulting in a gradual fluorescence increase. This ratio stayed about the same when varying the concentrations of cDNA in MB hybridization on the liquid/surface interface. Statistical data of the 51 single-molecule hybridization images showed that there was a multistep hybridization process. Our results also showed that photostability for the dye molecules associated with the double-stranded hybrids was better than that for those with the single-stranded molecular beacon DNA probes. Our results demonstrate the ability to obtain a better understanding of DNA hybridization processes using single-molecule techniques, which will improve biosensor and biochip development where surface-immobilized molecular beacon DNA probes provide unique advantages in signal transduction.     

Adsorption of single DNA molecules at the water/fused-silica interface

We applied total internal reflection fluorescence microscopy (TIRFM) to study intermolecular interactions at the water/fused-silica interface at the single-molecule level. Real-time molecular motion at the interface was recorded to reveal adsorption behavior and conformational dynamics of three DNAs with sticky ends of different numbers of unpaired bases. Features of DNA motion at the interface, such as evanescent-field residence time, linear velocity and frequency of adsorption/desorption events were measured to assess the relative affinities of the oligonucleotides for the surface. The general trend of stronger interaction with the surface for longer sticky ends confirmed hydrophobic interaction and hydrogen bonding as the driving forces of DNA adsorption to fused-silica at pH 5. For DNAs of different sizes, different conformational dynamics and the accessibility of sticky ends give rise to a nonlinear relationship with respect to affinity. Such information may prove valuable for chromatography studies as well as for the design of DNA microarrays and drug delivery systems.     

Analytical assays based on detecting conformational changes of single molecules.

One common strategy for the detection of biomolecules is labeling either the target itself or an antibody that binds to it. Herein, a different approach, based on detecting the conformational change of a probe molecule induced by binding of the target is discussed. That is, what is being detected is not the presence of the target or the probe, but the conformational change of the probe. Recently, a single-molecule sensor has been developed that exploits this mechanism to detect hybridization of a single DNA oligomer to a DNA probe, as well as specific binding of a single protein to a DNA probe. Biomolecular recognition often involves large conformational changes of the molecules involved, and therefore this strategy may be applicable to other assays.     

Cytosine-5 methylation-directed construction of a Au nanoparticle-based nanosensor for simultaneous detection of multiple DNA methyltransferases at the single-molecule level

DNA methylation at cytosine/guanine dinucleotide islands (CpGIs) is the most prominent epigenetic modification in prokaryotic and eukaryotic genomes. DNA methyltransferases (MTases) are responsible for genomic methylation, and their aberrant activities are closely associated with various diseases including cancers. However, the specific and sensitive detection of multiple DNA MTases has remained a great challenge due to the specificity of the methylase substrate and the rareness of methylation-sensitive restriction endonuclease species. Here, we demonstrate for the first time the cytosine-5 methylation-directed construction of a Au nanoparticle (AuNP)-based nanosensor for simultaneous detection of multiple DNA MTases at the single-molecule level. We used the methyl-directed endonuclease GlaI to cleave the site-specific 5-methylcytosine (5-mC). In the presence of CpG and GpC MTases (i.e., M.SssI and M.CviPI), their hairpin substrates are methylated at cytosine-5 to form the catalytic substrates for GlaI, respectively, followed by simultaneous cleavage by GlaI to yield two capture probes. These two capture probes can hybridize with the Cy5/Cy3–signal probes which are assembled on the AuNPs, respectively, to form the double-stranded DNAs (dsDNAs). Each dsDNA with a guanine ribonucleotide can act as the catalytic substrate for ribonuclease (RNase HII), inducing recycling cleavage of signal probes to liberate large numbers of Cy5 and Cy3 molecules from the AuNPs. The released Cy5 and Cy3 molecules can be simply quantified by total internal reflection fluorescence (TIRF)-based single-molecule imaging for simultaneous measurement of M.SssI and M.CviPI MTase activities. This method exhibits good specificity and high sensitivity with a detection limit of 2.01 × 10⁻³ U mL⁻¹ for M.SssI MTase and 3.39 × 10⁻³ U mL⁻¹ for M.CviPI MTase, and it can be further applied for discriminating different kinds of DNA MTases, screening potential inhibitors, and measuring DNA MTase activities in human serum and cell lysate samples, holding great potential in biomedical research, clinical diagnosis, drug discovery and cancer therapeutics.

Cytosine-5 methylation-directed construction of Au nanoparticle-based nanosensors enables specific and sensitive detection of multiple DNA methyltransferases.     

Single-molecule quantum-dot fluorescence resonance energy transfer.

Colloidal semiconductor quantum dots are promising for single-molecule biological imaging due to their outstanding brightness and photostability. As a proof of concept for single-molecule fluorescence resonance energy transfer (FRET) applications, we measured FRET between a single quantum dot and a single organic fluorophore Cy5. DNA Holliday junction dynamics measured with the quantum dot/Cy5 pair are identical to those obtained with the conventional Cy3/Cy5 pair, that is, conformational changes of individual molecules can be observed by using the quantum dot as the donor.     

A low-cost surface plasmon resonance instrument based on detection of resonance excitation wavelength

A laboratory-made surface plasmon resonance (SPR) instrument based on the detection of resonance excitation wavelength has been successfully fabricated. The performance and workability of the SPR instrument was demonstrated as a DNA biosensor. Biotinylated single-stranded oligonucleotides (ssDNA) were chemically immobilized on a gold-film surface of the SPR instrument as a DNA probe for the detection of its fully complementary, half-complementary and non-complementary ssDNA. The immobilization of the ssDNA probe was done by avidin-biotin linkage. The ssDNA used were 12-mer oligonucleotides. The sensing mechanism was based on the shift in resonance wavelength of an excitation light beam as the target ssDNA hybridized with the ssDNA on the gold-film surface. The linear dynamic ranges of the DNA biosensor for fully complementary and half-complementary ssDNA are 0.04-1.2 pM and 0.08-1.1 pM, respectively. The DNA biosensor showed higher sensitivity to fully complementary ssDNA than to half-complementary ssDNA. But no shift of resonance wavelength to the non-complementary ssDNA was observed.     

Comparative quantification of nucleic acids using single-molecule detection and molecular beacons

This paper reports a highly sensitive homogenous method for comparative quantification of nucleic acids based on single-molecule detection (SMD) and molecular beacons (MBs). Two different color MBs were used to perform a separation-free comparative hybridization assay for simultaneous quantification of both target and control strands. A fluorescent burst, emitted from a single hybrid when it passes through a minuscule laser-focused region, is detected with high signal-to-noise ratio (SNR) by using single-molecule fluorescence spectroscopy. Targets are quantified via counting of discrete fluorescent bursts. The high SNR achieved in both detection channels overcame the complications of fluorescent variability usually observed in dual-color ensemble measurements. In comparison with the conventional ensemble methods, this method improved the detection limit by 3 orders of magnitude and reduced the probe consumption by 6 orders of magnitude, facilitating a highly sensitive approach for comparative quantification of nucleic acids and offering great promise for genomic quantification without amplification.     

Sequence-selective single-molecule alkylation with a pyrrole-imidazole polyamide visualized in a DNA nanoscaffold

We demonstrate a novel strategy for visualizing sequence-selective alkylation of target double-stranded DNA (dsDNA) using a synthetic pyrrole-imidazole (PI) polyamide in a designed DNA origami scaffold. Doubly functionalized PI polyamide was designed by introduction of an alkylating agent 1-(chloromethyl)-5-hydroxy-1,2-dihydro-3H-benz[e]indole (seco-CBI) and biotin for sequence-selective alkylation at the target sequence and subsequent streptavidin labeling, respectively. Selective alkylation of the target site in the substrate DNA was observed by analysis using sequencing gel electrophoresis. For the single-molecule observation of the alkylation by functionalized PI polyamide using atomic force microscopy (AFM), the target position in the dsDNA (～200 base pairs) was alkylated and then visualized by labeling with streptavidin. Newly designed DNA origami scaffold named "five-well DNA frame" carrying five different dsDNA sequences in its cavities was used for the detailed analysis of the sequence-selectivity and alkylation. The 64-mer dsDNAs were introduced to five individual wells, in which target sequence AGTXCCA/TGGYACT (XY = AT, TA, GC, CG) was employed as fully matched (X = G) and one-base mismatched (X = A, T, C) sequences. The fully matched sequence was alkylated with 88% selectivity over other mismatched sequences. In addition, the PI polyamide failed to attach to the target sequence lacking the alkylation site after washing and streptavidin treatment. Therefore, the PI polyamide discriminated the one mismatched nucleotide at the single-molecule level, and alkylation anchored the PI polyamide to the target dsDNA.     

Novel wavelength-resolved fluorescence detection for a high-throughput capillary electrophoresis system under a diascopic configuration

This paper presents a novel method regarding a wavelength-resolved fluorescence detection scheme for high-throughput analysis of bio-samples in a micro-CE chip. Instead of using the conventional laser-induced fluorescence (LIF) microscope equipped with delicate spatial filters and complex control systems, this study adopts a hollow cone illumination generated using a dark-field condenser for exciting fluorescence in the microchannel and an ultraviolet-visible-near-infrared (UV-Vis-NIR) spectrometer for detecting the emission signals. Experimental results show that the proposed system is feasible for simultaneously detecting a mixed sample composed of Atto 610, Rhodamine B and fluorescein isothiocyanate (FITC) fluorescent dyes in a single test run. Furthermore, a mixed bio-sample composed of two mixed 16-mer single-stranded DNAs labeled with Cy3 and FITC fluorescent dyes is also successfully detected with the proposed system. The measured limit of detection (LOD) for detecting FITC of the proposed system can be as low as 5.4x10(-6)M (S/N=3). This proposed detection method has shown its potential on RNA identification and DNA sequencing applications.     

Electrochemical enzyme-linked immunoassay in a DNA hybridization sensor

In most of the currently developed electrochemical DNA hybridization sensors short single-stranded probe DNA is immobilized on an electrode and both the hybridization and detection steps are carried out on the electrode surface. Here we use a new technology in which DNA hybridization is performed on commercially available magnetic beads and detection on solid electrodes. Paramagnetic Dynabeads Oligo(dT)₂₅ (DBT) with covalently bound (dT)₂₅ probe are used for the hybridization with target DNA containing adenine stretches. Target DNA is modified with osmium tetroxide,2,2′-bipyridine (Os,bipy) and the immunogenic DNA-Os,bipy adduct is determined by the enzyme-linked immunoassay with electrochemical detection. Electroinactive 1-naphthyl phosphate is used as a substrate and the electroactive product (1-naphthol) is measured on the carbon electrodes. Alternatively Os,bipy-modified target DNA can be determined directly by measuring the osmium signal on the pyrolytic graphite electrode (PGE). A comparison between determinations of the 67-mer oligodeoxynucleotide on carbon electrodes using (a) the guanine oxidation signal, (b) direct determination of the DNA-Os,bipy adduct and (c) its electrochemical immunoassay showed immunoassay to be the most sensitive method. In combination with DBT, the DNA hybridization of long target deoxyoligonucleotides (such as 67- and 97-mers) and a DNA PCR product (226-base pairs) have been detected by immunoassay at high sensitivity and specificity.     

功能化纳米金放大的DNA电化学传感器研究

研究了DNA夹心杂交和直接杂交体系,将功能化纳米金引入到标记有生物素的杂交双链上,制成具有电化学活性和纳米金放大作用的DNA电化学传感器,采用循环伏安法测试.在夹心杂交体系中,靶点DNA浓度与阳极峰电流关系曲线的相对标准偏差为3.0%～13.0%,在浓度为6.9×10^-3～0.14nmol/L范围内得到良好的线性关系,检测限达到2.0×10^-3nmol/L,实现了对单碱基突变的高灵敏检测和序列识别.直接杂交检测限为2.5×10^-4mol/L,分别在2.5×10^-4～5.0×10^-3nmol/L和5.0×10^-3～10nmol/L范围内得到峰电量与浓度的良好线性关系.并比较这两种体系.     

An ultra-sensitive DNA assay based on single-molecule detection coupled with hybridization accumulation and its application

An ultra-sensitive assay for quantification of DNA based on single-molecule detection coupled with hybridization accumulation was developed. In this assay, target DNA (tDNA) in solution was accumulated on a silanized substrate blocked with ethanolamine and bovine serum albumin (BSA) through a hybridization reaction between tDNA and capture DNA immobilized on the substrate. The tDNA on the substrate was labeled with quantum dots which had been modified with detection DNA and blocked with BSA. The fluorescence image of single QD-labeled tDNA molecules on the substrate was acquired using total internal reflection fluorescence microscopy. The tDNA was quantified by counting the bright dots on the image from the QDs. The limit of detection of the DNA assay was as low as 6.4 × 10(-18) mol L(-1). Due to the ultra-high sensitivity, the DNA assay was applied to measure the beta-2-microglobulin messenger RNA level in single human breast cancer cells without a need for PCR amplification.     

Nanomechanics of the formation of DNA self-assembled monolayers and hybridization on microcantilevers

Biomolecular interactions over the surface of a microcantilever can produce its bending motion via changes of the surface stress, which is referred to nanomechanical response. Here, we have studied the interaction forces responsible for the bending motion during the formation of a self-assembled monolayer of thiolated 27-mer single-stranded DNA on the gold-coated side of a microcantilever and during the subsequent hybridization with the complementary nucleic acid. The immobilization of the single-stranded DNA probe gives a mean surface stress of 25 mN/m and a mean bending of 23 nm for microcantilevers with a length and thickness of about 200 microm and 0.8 microm, respectively. The hybridization with the complementary sequence could not be inferred from the nanomechanical response. The nanomechanical response was compared with data from well-established techniques such as surface plasmon resonance and radiolabeling, to determine the surface coverage and study the intermolecular forces between neighboring DNA molecules anchored to the microcantilever surface. From both techniques, an immobilization surface density of 3 x 10(12) molecules/cm(2) and a hybridization efficiency of 40% were determined. More importantly, label-free hybridization was clearly detected in the same conditions with a conventional sensor based on surface plasmon resonance. The results imply that the nanomechanical signal during the immobilization process arises mainly from the covalent attachment to the gold surface, and the interchain interactions between neighboring DNA molecules are weak, producing an undetectable surface stress. We conclude that detection of nucleic acid hybridization with nanomechanical sensors requires reference cantilevers to remove nonspecific signals, more sensitive microcantilever geometries, and immobilization chemistries specially addressed to enhance the surface stress variations.     

DNA hybridization in reverse micelles and its application to mutation detection

DNA hybridization was investigated in AOT (sodium di-2-ethylhexyl sulfosuccinate)/isooctane reverse micelles. The single-stranded DNA molecules were encapsulated in the nanoscale water pools formed in the reverse micelles, reducing the hybridization rate. The DNA hybridization can be monitored by simply measuring the UV absorbance of the reverse micellar solution at 260 nm. We found that the DNA hybridization occurred only at the restricted water content (Wo = [H2O]/[AOT] = 20) and below room temperature. We applied this DNA hybridization behavior in reverse micelles to mutation detection in a model gene p53 and successfully detected the single nucleotide mutations in 20-mer. 30-mer and 50-mer nucleotides without a DNA labeling.     

Simultaneous and ultrasensitive detection of multiple microRNAs by single-molecule fluorescence imaging

Cell status changes are typically accompanied by the simultaneous changes of multiple microRNA (miRNA) levels. Thus, simultaneous and ultrasensitive detection of multiple miRNA biomarkers shows great promise in early cancer diagnosis. Herein, a facile single-molecule fluorescence imaging assay was proposed for the simultaneous and ultrasensitive detection of multiple miRNAs using only one capture anti-DNA/RNA antibody (S9.6 antibody). Two complementary DNAs (cDNAs) designed to hybridize with miRNA-21 and miRNA-122 were labelled with Cy3 (cDNA1) and Cy5 (cDNA2) dyes at their 5′-ends, respectively. After hybridization, both miRNA-21/cDNA1 and miRNA-122/cDNA2 complexes were captured by S9.6 antibodies pre-modified on a coverslip surface. Subsequently, the Cy3 and Cy5 dyes on the coverslip surface were imaged by the single-molecule fluorescence setup. The amount of miRNA-21 and miRNA-122 was quantified by counting the image spots from the Cy3 and Cy5 dye molecules in the green and red channels, respectively. The proposed assay displayed high specificity and sensitivity for singlet miRNA detection both with a detection limit of 5 fM and for multiple miRNA detection both with a detection limit of 20 fM. Moreover, it was also demonstrated that the assay could be used to detect multiple miRNAs simultaneously in human hepatocellular cancer cells (HepG2 cells). The proposed assay provides a novel biosensing platform for the ultrasensitive and simple detection of multiple miRNA expressions and shows great prospects for early cancer diagnosis.

A single-molecule assay for multiple microRNA detection.