Synthesis and characterization of light‐emitting oligo(p‐phenylene‐vinylene)s and polymeric derivatives containing three‐ and five‐conjugated phenylene rings. II. Electro‐optical properties and optimization of PLED performance

A series of multilayer polymeric light‐emitting diodes (PLEDs) containing an electron‐transporting layer (ETL), that is tris(8‐quinolinolato)‐aluminum(III) (Alq) and 2,2′,2″‐(1,3,5‐phenylene)‐tris[1‐phenyl‐1H‐benzimidazole] (TPBI), were fabricated by doping fluorescent oligo(p‐phenylene‐vinylene)s (BIII and BV) and polymer derivatives (PBV) into poly(N‐vinyl carbazole) (PVK). These PLEDs can be optimized by the design of multilayer device configurations (brightness increased 8–15 times by addition of ETL) and possess greenish electroluminescent (EL) spectra peaked about 500–540 nm. A remarkably high brightness of 56,935 cd/m² with a power efficiency of 3.25 lm/W was obtained in the device of PVK:BVOC₈‐OC₈ (100:20)/Alq (60 nm/60 nm). It suggests that the emission mechanism (including the conjugated and excimer emissions of BVOC₈‐OC₈ emitters) originates from both of BVOC₈‐OC₈ and ETL (Alq and TPBI) by varying the concentration of chromophores and adjusting the thickness of ETL. The concentration effect of the emitters in PVK (i.e. PVK:BVOC₈‐OC₈ = 100:5, 100:20, and 100:100 wt %) and the influence of the ETL (including its thickness) on the EL characteristics are also reported. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2922–2936, 2006     

Copolyfluorenes containing pendant bipolar carbazole and 1,2,4‐triazole groups: Synthesis,characterization, and optoelectronic applications

Three novel copolyfluorenes ( P1 ‐ P3 ) containing pendant bipolar groups (2.5–7.7 mol %), directly linked hole‐transporting carbazole and electron‐transporting aromatic 1,2,4‐triazole, were synthesized by the Suzuki coupling reaction and applied to enhance emission efficiency of polymer light‐emitting diodes based on conventional MEH‐PPV. The bipolar groups not only suppress undesirable green emission of polyfluorene under thermal annealing, but also promote electron‐ and hole‐affinity of the resulting copolyfluorenes. Blending the bipolar copolyfluorenes with MEH‐PPV results in significant enhancement of device performance [ITO/PEDOT:PSS/MEH‐PPV+ P1 , P2 or P3 /Ca(50 nm)/Al(100 nm)]. The maximum luminance and luminance efficiency were enhanced from 3230 cd/m² and 0.29 cd/A of MEH‐PPV‐only device to 15,690 cd/m² and 0.81 cd/A (blend device with MEH‐PPV/ P3 = 94/6 containing about 0.46 wt % of pendant bipolar residues), respectively. Our results demonstrate the efficacy of the bipolar copolyfluorenes in enhancing emission efficiency of MEH‐PPV. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Copoly(p‐phenylene)s containing bipolar triphenylamine and 1,2,4‐triazole groups: Synthesis,optoelectronic properties,and applications

Two novel copoly(p‐phenylene)s ( P1 – P2 ) containing bipolar groups (12.8 and 6.8 mol %, respectively), directly linked hole transporting triphenylamine and electron transporting aromatic 1,2,4‐triazole, were synthesized to enhance electroluminescence (EL) of poly(p‐phenylene vinylene) (PPV) derivatives. The bipolar groups not only enhance thermal stability but also promote electron affinity and hole affinity of the resulting copoly(p‐phenylene)s. Blending the bipolar copoly‐(p‐phenylene)s ( P1 – P2 ) with PPV derivatives ( d6‐PPV ) as an emitting layer effectively improve the emission efficiency of its electroluminescent devices [indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS)/polymer blend/Ca (50 nm)/Al (100 nm)]. The maximum luminance and maximum luminance efficiency were significantly enhanced from 310 cd m^?2 and 0.03 cd A^?1 ( d6‐PPV ‐based device) to 1450 cd m^?2 and 0.20 cd A^?1 (blend device with d6‐PPV / P1 = 96/4 containing ～0.5 wt % of bipolar groups), respectively. Our results demonstrate the efficacy of the copoly(p‐phenylene)s with bipolar groups in enhancing EL of PPV derivatives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Electroluminescent properties of a partially‐conjugated hyperbranched poly(p‐phenylene vinylene)

In this paper, the electroluminescent properties of a new partially‐conjugated hyperbranched poly (p‐phenylene vinylene) (HPPV) were studied. The single layer light‐emitting device with HPPV as the emitting layer emits blue‐green light at 496 nm, with a luminance of 160 cd/m² at 9 V, a turn‐on voltage of 4.3 V and an electroluminescent efficiency of 0.028 cd/A. By doping an electron‐transport material [2‐(4‐biphenylyl)‐5‐phenyl‐1,3,4‐oxadiazole, PBD] into the emitting layer and inserting a thin layer of tris(8‐hydroxy‐quinoline)aluminum (Alq₃) as electron transporting/hole blocking layer for the devices, the electroluminescent efficiency of 1.42 cd/A and luminance of 1700 cd/m² were achieved. The results demonstrate that the devices with the hyperbranched polymers as emitting material can achieve high efficiency through optimization of device structures. Copyright © 2006 John Wiley & Sons, Ltd.     

Bipolar copolymers comprised mesogen‐jacketed polymer containing oxadiazole units and PVK as host materials for electroluminescent devices

Nonconjugated bipolar transport polymers have been developed as host materials for electroluminescent devices by incorporating both electron‐transporting and hole‐transporting functionalities into copolymers. The random copolymer PCt‐nvk3‐7 containing mesogen‐jacketed segment of P‐Ct have been synthesized and characterized. The effect of mesogen‐jacketed segment content of these bipolar copolymers on device performance has been investigated. The results of polymer light‐emitting diodes (PLEDs) show that the jacketed content of copolymers has a significant effect on device performance: lowering charge transport and facilitating the hole‐electron recombination leads to much higher current efficiency. Applying these high triplet random copolymers as host, the maximum current efficiency of 0.70 cd/A and the maximum brightness of 1872.8 cd/m² was achieved for PCt‐nvk3‐7 with an orange‐emitting complex dopant. The results suggest that the bipolar copolymers PCt‐nvks can be good host polymers for electrophosphorescent devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7861–7867, 2008     

Hole‐transporting host‐polymer series consisting of triphenylamine basic structures for phosphorescent polymer light‐emitting diodes

A series of novel styrene derived monomers with triphenylamine‐based units, and their polymers have been synthesized and compared with the well‐known structure of polymer of N,N′‐bis(3‐methylphenyl)‐N,N′‐diphenylbenzidine with respect to their hole‐transporting behavior in phosphorescent polymer light‐emitting diodes (PLEDs). A vinyltriphenylamine structure was selected as a basic unit, functionalized at the para positions with the following side groups: diphenylamine, 3‐methylphenyl‐aniline, 1‐ and 2‐naphthylamine, carbazole, and phenothiazine. The polymers are used in PLEDs as host polymers for blend systems with the following device configuration: glass/indium–tin–oxide/PEDOT:PSS/polymer‐blend/CsF/Ca/Ag. In addition to the hole‐transporting host polymer, the polymer blend includes a phosphorescent dopant [Ir(Me‐ppy)₃] and an electron‐transporting molecule (2‐(4‐biphenyl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole). We demonstrate that two polymers are excellent hole‐transporting matrix materials for these blend systems because of their good overall electroluminescent performances and their comparatively high glass transition temperatures. For the carbazole‐substituted polymer (T_g = 246 °C), a luminous efficiency of 35 cd A^?1 and a brightness of 6700 cd m^?2 at 10 V is accessible. The phenothiazine‐functionalized polymer (T_g = 220 °C) shows nearly the same outstanding PLED behavior. Hence, both these polymers outperform the well‐known polymer of N,N′‐bis(3‐methylphenyl)‐N,N′‐diphenylbenzidine, showing only a luminous efficiency of 7.9 cd A^?1 and a brightness of 2500 cd m^?2 (10 V). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3417–3430, 2010     

Hole‐buffer polymer composed of alternating p‐terphenyl and tetraethylene glycol ether moieties: Synthesis and application in polymer light‐emitting diodes

Carrier balance is essential to obtain efficient emission in polymer light‐emitting diodes (PLEDs). A new polymer 3P5O composed of alternating p‐terphenyl and tetraethylene glycol ether segments is designed and synthesized by the Suzuki coupling reaction and successfully employed as hole‐buffer layer to improve carrier balance. Multilayer PLEDs [ITO/PEDOT:PSS/ 3P5O /SY/LiF/Al], with Super Yellow (SY) as the emitting layer and 3P5O as the hole‐buffer layer, reveal maximum luminance (17,050 cd/m²) and maximum current efficiency (6.6 cd/A) superior to that without the hole‐buffer layer (10,017 cd/m², 3.0 cd/A). Moreover, it also shows better performance than that using conventional BCP as hole‐blocking layer [ITO/PEDOT:PSS/SY/BCP/LiF/Al (80 nm): 13,639 cd/m², 4.1 cd/A]. The performance enhancement has been attributed to hole‐buffering characteristics of 3P5O that results in improved carrier recombination ratio and wider carrier recombination region. Current results indicate that the 3P5O is a promising hole‐buffer polymer to enhance the performance of optoelectronic devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 785–794     

Novel 9,9′‐(1,3‐phenylene)bis‐9H‐carbazole‐containing copolymers as hole‐transporting and host materials for blue phosphorescent polymer light‐emitting diodes

Novel photo‐crosslinkable hole‐transport and host materials incorporated into multilayer blue phosphorescent polymer light‐emitting diodes (Ph‐PLEDs) were demonstrated in this study. The oxetane‐containing copolymers, which function as hole‐transport layers (HTL), could be cured by UV irradiation in the presence of a cationic photoinitiator. The composition of the two monomers was varied to yield three different hole‐transporting copolymers, [Poly(9,9′‐(5‐(((4‐(7‐(4‐(((3‐methyloxetan‐3‐yl)methoxy)methyl)phenyl)octan‐3‐yl)benzyl)oxy)methyl)?1,3‐phenylene)bis(9H‐carbazole)) ( P(mCP‐Ox)‐I , ‐II , and ‐III )]. In addition, monomer 1 was copolymerized with styrene to produce copolymer P(mCP‐Ph) as a host material for bis[2‐(4,6‐difluorophenyl)pyridinato‐C²,N](picolinato)iridium(III) (FIrpic), a blue‐emitting dopant. All mCP‐based copolymers displayed high glass transition temperatures (T_g) of up to 130–140 °C and triplet energies of up to 3.00 eV. The blue Ph‐PLEDs exhibited a maximum external quantum efficiency of 2.55%, in addition to a luminous efficiency of 8.75 cd A^?1 when using the device configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate)/ P(mCP‐OX)‐III / P(mCP‐Ph) :FIrpic(15 wt %)/3,3′‐[5′‐[3‐(3‐pyridinyl)phenyl][1,1′:3′,1′′‐terphenyl]‐3,3′′‐diyl]bispyridine/LiF/Al. The device bearing P(mCP‐Ox)‐III HTL, containing the highest composition of mCP unit, exhibited better performance than the other devices, which is attributed to induction of more balanced charge carriers and carrier recombination in the emissive layer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 707–718     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Deep‐red light‐emitting phosphorescent dendrimer encapsulated tris‐[2‐benzo[b]thiophen‐2‐yl‐pyridyl] iridium (III) core for light‐emitting device applications

New deep‐red light‐emitting phosphorescent dendrimers with hole‐transporting carbazole dendrons were synthesized by reacting tris(2‐benzo[b]thiophen‐2‐yl‐pyridyl) iridium (III) complex with carbazolyl dendrons by DCC‐catalyzed esterification. The resulting first‐, second‐, and third‐generation dendrimers were found to be highly efficient as solution‐processable emitting materials and for use in host‐free electrophosphorescent light‐emitting diodes. We fabricated a host‐free dendrimer EL device with configuration ITO/PEDOT:PSS (40 nm)/dendrimer (55 nm)/BCP (10 nm)/Alq₃ (40 nm)/LiF (1 nm)/Al (100 nm) and characterized the device performance. The multilayered devices showed luminance of 561 cd/m² at 383.4 mA/cm² (12 V) for 15 , 1302 cd/m² at 321.3 mA/cm² (14 V) for 16 , and 422 cd/m² at 94.4 mA/cm² (18 V) for 17 . The third‐generation dendrimer, 17 (η_ext = 6.12% at 7.5 V), showed the highest external quantum efficiency (EQE) with an increase in the density of the light‐harvesting carbazole dendron. Three dendrimers exhibited considerably pure deep‐red emission with CIE 1931 (Commission International de L'Eclairage) chromaticity coordinates of x = 0.70, y = 0.30. The CIE coordinates remained very stable with the current density. The integration of rigid hole‐transporting dendrons and phosphorescent complexes provides a new route to design highly efficient solution‐processable materials for dendrimer light‐emitting diode (DLED) applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7517–7533, 2008     

Luminescence properties of poly(p‐phenylenevinylene) derivatives carrying directly attached hole‐transporting carbazole and electron‐transporting phenyloxadiazole pendants

New poly(p‐phenylenevinylene) (PPV) derivatives ( polymer 1 and 2 ) that carry hole‐transporting carbazole and electron‐transporting phenyloxadiazole pendants were synthesized and their photo‐ and electroluminescence properties were studied. Polymer 1 is poly[2‐(N‐carbazolyl)‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene] that has both carbazole and 2‐ethylhexyl pendant groups. And polymer 2 is poly[2‐{4‐[5‐(4‐t‐butylphenyl)‐1,3,4‐oxadiazolyl]phenyl}‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene], which bears the 2‐(4‐t‐butylphenyl)‐5‐phenyl‐1,3,4‐oxadiazole pendants. The optical properties of the polymer films were studied by UV‐vis absorption, photoluminescence (PL) and electroluminescence (EL) spectroscopy. EL devices with the configuration of ITO/poly(3,4‐ethylenedioxy‐2,5‐thienylene) (PEDOT) polymer/Ca/Al were constructed and the device performances were compared. Polymer 1 emits bright yellowish green light (λ_max = 530 nm), whereas polymer 2 emits yellowish orange (λ_max = 540 nm) light. The device fabricated using polymer 1 showed a low turn‐on electric field of 0.31 MV/cm and the maximum luminance of 30,390 cd/m² at 1.50 MV/cm. Polymer 2 exhibited a little poorer device performance (turn‐on electric field: 0.94 MV/cm; maximum luminance: 5,720 cd/m² at 2.74 MV/cm). Maximum photometric efficiencies of the devices were 4.4 and 1.3 cd/A, respectively.     

Synthesis and characterization of indenofluorene‐based copolymers containing 2,5‐bis(2‐thienyl)‐N‐arylpyrrole for bulk heterojunction solar cells and polymer light‐emitting diodes

Two novel alternating π‐conjugated copolymers, poly[2,8‐(6,6′,12,12′‐tetraoctyl‐6,12‐dihydroindeno‐[1,2b]fluorene‐ alt‐5(1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole) ( P1 ) and poly[2,8‐(6,6′,12,12′‐tetraoctyl‐6,12‐dihydroindeno‐[1,2b]fluorene‐ alt‐5(1‐(p‐octylphenyl)‐2,5‐di(2‐thienyl)pyrrole) ( P2 ), were synthesized via the Suzuki coupling method and their optoelectronic properties were investigated. The resulting polymers P1 and P2 were completely soluble in various common organic solvents and their weight‐average molecular weights (M_w) were 5.66 × 10⁴ (polydispersity: 1.97) and 2.13× 10⁴ (polydispersity: 1.54), respectively. Bulk heterojunction (BHJ) solar cells were fabricated in ITO/PEDOT:PSS/polymer:PC₇₀BM(1:5)/TiO_x/Al configurations. The BHJ solar cell with P1 :PC₇₀BM (1:5) has a power conversion efficiency (PCE) of 1.12% (J_sc= 3.39 mA/cm², V_oc= 0.67 V, FF = 49.31%), measured using AM 1.5 G solar simulator at 100 mW/cm² light illumination. We fabricated polymer light‐emitting diodes (PLEDs) in ITO/PEDOT:PSS/emitting polymer:polyethylene glycol (PEG)/Ba/Al configurations. The electroluminescence (EL) maxima of the fabricated PLEDs varied from 526 nm to 556 nm depending on the ratio of the polymer to PEG. The turn‐on voltages of the PLEDs were in the range of 3–8 V depending on the ratio of the polymer to PEG, and the maximum brightness and luminance efficiency were 2103 cd/m² and 0.37 cd/A at 12 V, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3169–3177, 2010     

Synthesis and properties of σ–π conjugated alternating polymers consisting of carbazole and organosilicon units

We have synthesized novel σ–π conjugated polymers with an alternating organosilanylene and π‐electron system, intending to utilize them for hole‐transporting materials of electroluminescent (EL) devices. 3,6‐Di(lithioethynyl)carbazoles were co‐polymerized with organodichlorosilanes to give the corresponding polymers with molecular weights of M_W = 2000–5000. Another type of polymer with a thienylene unit was also synthesized by the nickel‐catalyzed reaction of the di‐Grignard reagent of 1,2‐bis[2‐(5‐bromothienyl)]tetraethyldisilane with 3,6‐dibromocarbazole, the molecular weight being M_n = 3100. The EL devices with a double‐layer system composed of tris(8‐quinolinolato)aluminum(III) and the present polymers as the emitting‐electron‐transporting and hole‐transporting layers, respectively, emit green EL with a maximum intensity of the order of 10³ cd m^?2. Of these, the device with the thienylene–carbazole polymers exhibited the highest luminance of 1480 cd m^?2. Copyright © 2001 John Wiley & Sons, Ltd.     

High electroluminescent properties of conjugated copolymers from poly[9,9‐dioctylfluorenyl‐2,7‐vinylene]‐co‐(2‐(3‐dimethyldodecylsilylphenyl)‐1,4‐phenylene vinylene)] for light‐emitting diode applications

A new series of copolymers with high brightness and luminance efficiency were synthesized using the Gilch polymerization method, and their electro‐optical properties were investigated. The weight‐average molecular weights (M_w) and polydispersities of the synthesized poly(9,9‐dioctylfluorenyl‐2,7‐vinylene) [poly(FV)], poly[2‐(3‐dimethyldodecylsilylphenyl)‐1,4‐phenylenevinylene] [poly(m‐SiPhPV)], and poly[9,9‐di‐n‐octylfluorenyl‐2,7‐vinylene]‐co‐(2‐(3‐dimethyldodecylsilylphenyl)‐1,4‐phenylene vinylene)] [poly(FV‐co‐m‐SiPhPV)] were found to be in the ranges of (8.7–32.6) × 10⁴ and 2.3–5.4, respectively. It was found that the electro‐optical properties of the copolymers could be adjusted by controlling the feed ratios of the comonomers. Thin films of poly(FV), poly(m‐SiPhPV), and poly(FV‐co‐m‐SiPhPV) were found to exhibit photoluminescence quantum yields between 21% and 42%, which are higher than those of MEH‐PPV. Light‐emitting diodes were fabricated in ITO/PEDOT/light‐emitting polymer/cathode configurations using either double layer (LiF/Al) or triple layer (Alq₃/LiF/Al) cathode structures. The performance of the polymer light‐emitting diodes (PLEDs) with triple layer cathodes was found to be better than that of the PLEDs with double layer cathodes in poly(FV) and poly(FV‐co‐m‐SiPhPV). The turn‐on voltages of the PLEDs were in the range of 4.5–6.0 V, with maximum brightness and luminance efficiency up to 9691 cd/m² at 16 V and 3.27 cd/A at 13 V, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5062–5071, 2005     

Bipolar copoly(aryl ether) containing distyrylbenzene,triphenylamine, and 1,2,4‐triazole moieties: Synthesis and optoelectronic properties

A novel copoly(aryl ether) ( P1 ) consisting of alternate emitting segments (distyrylbenzene) and a bipolar moiety composed of directly linked electron‐transporting aromatic 1,2,4‐triazole and hole‐transporting triphenylamine was synthesized. The copoly(aryl ether) is readily soluble in common organic solvents and exhibit good thermal stability with thermal decomposition temperature above 450 °C. The emission and the photoluminescence quantum yield of the copolymer are dominated by the emitting segments (distyrylbenzene) with longer emissive wavelength. Electron affinity of P1 is evidently enhanced after introducing the isolated bipolar unit, as confirmed by the lowered lowest unoccupied molecular orbital level (–2.77 eV) relative to P0 without bipolar unit (–2.34 eV). This results in improved emission efficiency of its polymer light‐emitting diode (indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/ P1 /LiF/Ca/Al) due to more balanced charges injection and transport. Blending P1 with poly(9,9‐dihexylfluorene) ( PF ) further improves the efficiency of the device; the best performance was obtained for PF / P1 = 20/0.8 (w/w) with maximum luminance and maximum luminance efficiency being significantly enhanced to 3260 cd/m² and 1.08 cd/A, respectively, from 380 cd/m² and 0.009 cd/A of P1 ‐based device. These results demonstrate that the bipolar moiety can be used to enhance charges injection and transport of electroluminescent polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Organic electroluminescent devices using organosilicon polymers containing phenylene or diethynylanthracene units

Double‐layer electroluminescent (EL) devices composed of an alternating polymer with mono‐, di‐, or tri‐silanylene and phenylene units, [(Si R) _m (C₆H₄)] _n (R = alkyl, m = 1–3) as a hole‐transporting layer, and tris(8‐quinolinolato)­aluminium(III) complex (Alq) as an electron‐transporting–emitting layer were fabricated. The longer silanylene chain lengths in the polymer, on going from m = 1 to m = 2 and 3, result in better electrical properties for the EL devices, implying that the σ–π conjugation in the polymers plays an important role in the hole‐transporting properties, including the hole‐injection efficiency from an anode. This is in marked contrast to the improved hole‐transporting properties that occur in response to reducing the silanylene chain length of silanylene‐diethynylanthracene polymers previously reported. The UV absorption maxima of silanylene‐phenylene polymers shift to longer wavelengths with increasing m, and their oxidation peak potentials in cyclic voltammograms shift to lower potential with increasing m, in accordance with the improved electrical properties of the device that are observed with the polymers containing the longer silanylene chain. A triple‐layer EL device with a hole‐transporting layer of monosilanylene‐diethynylanthracene polymer, an electron‐transporting–emitting layer of Alq, and an electron‐blocking layer of N,N′‐diphenyl‐N,N′‐bis(3‐methylphenyl)‐1,1′‐biphenyl‐4,4′‐diamine (TPD) exhibited a maximum efficiency of 1.0 lm W⁻¹ and a maximum luminance of 14750 cd m⁻², both of which are much higher than the values obtained from a conventional EL device with TPD/Alq. Copyright © 1999 John Wiley & Sons, Ltd.     

Unique para‐effect in electron ionization mass spectra of bis(perfluoroacyl) derivatives of bifunctional aminobenzenes

A new kind of ‘para‐effect’ under electron ionization (EI) conditions has been discovered for a series of bis(perfluoroacyl) derivatives of o‐, m‐ and p‐phenylenediamines, ‐hydroxybenzeneamines and ‐mercaptobenzeneamines of a common structure RCOX–C₆H₄–NHCOR (X = NH, S, O; R = CF₃, C₂F₅, C₃F₇). Only the para‐isomers showed successive loss of a radical RCO^? and a molecule RCN, leading to very intense peaks in the EI spectra. The composition and the origin of the [M–COR–NCR]⁺ ions were confirmed by exact mass measurements and linked scan experiments. The proposed mechanism of their formation takes into account likely para‐quinoid structures of the precursor ions. A similar rearrangement has not been observed for para‐isomers in the series of bis(perfluoroacyl) derivatives of benzenediols, mercaptophenols and dimercaptobenzenes. Published in 2010 by John Wiley & Sons, Ltd.     

Fluorene pendant-functionalization of poly(N-vinylcarbazole) as deep-blue fluorescent and host materials for polymer light-emitting diodes

π-Electron coupling of pendant conjugated segment in π-stacked semiconducting polymers always causes the formation of defect trapped sites and further quenched high-band excitons, which is harmful to the performance and stability of deep-blue polymer light-emitting diodes (PLEDs). Herein, considerate of “defect” carbazole (Cz) electromers in poly(N-vinylcarbazole) (PVK), a series of fluorene units are introduced into pendant segments (PVCz-DMeF, PVCz-FMeNPh and PVCz-DFMeNPh) to suppress the strong π-electron coupling of pendant Cz units and enhance radiative transition toward fabricating sable PLEDs. Compared to PVCz-FMeNPh and PVCz-DFMeNPh, PVCz-DMeF spin-coated films show a relatively efficient deep-blue emission, completely similar to its single pendant chromophore, confirmed an extremely weak charge-transfer and electron coupling between adjacent pendant segments. Therefore, PLEDs based on PVCz-DMeF present stable and deep-blue emission with a high color purity (0.17, 0.08), associated with extremely weak defect emission at 600∼700 nm (induced by carbazole electromers). Finally, PLEDs based on PVCz-DMeF/F8BT blended films (1:1) also present the high maximum luminance (L_max) of 6261 cd/m² and current efficiency (CE_max) of 2.03 cd/A, confirmed slightly trapped sites formation. Therefore, precisely control the arrangement and packing model of pendant units in π-stacked polymer is an essential prerequisite for building efficient and stable emitter for optoelectronic devices.     

Polyfluorene containing diphenylquinoline pendants and their applications in organic light emitting diodes

We present a short, efficient synthetic route for the preparation of a novel polyfluorene copolymer (PF‐Q) containing two electron‐deficient, 2,4‐diphenylquinoline groups functionalized at the C‐9 positions of alternate fluorene units that form a three‐dimensional cardostructure. The presence of the rigid bulky pendent groups leads to a polyfluorene possessing a high glass‐transition temperature (207 °C) and very good thermal stability (5% weight loss observed at 460 °C). A photoluminescence study revealed that the Förster energy transfer from the excited quinoline groups to the polyfluorene backbone is very efficient; it also demonstrated that the commonly observed aggregate/excimer formation in polyfluorenes is suppressed very effectively in this polymer, even after it has been annealed at 150 °C for 20 h. A light emitting diode (LED) device prepared with PF‐Q as the emitting layer exhibits a stable blue emission with a maximum brightness of 1121 cd/m² at 12 V and a maximum external quantum efficiency of 0.80% at 250 cd/m². We also used PF‐Q, which contains diphenylquinoline units that behave as electron‐transporting side chains, as a host material and doped it with 2.4 wt % of a red‐emitting phosphorescent dye, Os(fppz), to realize a red electroluminescence with CIE color coordinates of (0.66, 0.34). The doped device exhibits a maximum external quantum efficiency of 6.63% (corresponding a luminance efficiency of 8.71 cd/A) at a current density of 47.8 mA/cm², together with a maximum brightness of 10457 cd/m². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 859–869, 2005     

Synthesis and properties of novel σ–π alternating polymers with triphenylamine and organosilicon units

We have synthesized novel σ–π conjugated polymers with N,N‐bis(p‐ethynylphenyl)‐N‐(p‐tolyl)amine as the π‐unit. The electroluminescent devices, with a double‐layer system composed of Alq and the present polymers as the emitting‐electron‐transporting and hole‐transporting layers respectively, emit green electroluminescence with a maximum intensity of 760 cd m^?2. Copyright © 2001 John Wiley & Sons, Ltd.