Helical opposition in poly(2‐methoxyaniline) doped with beta‐cyclodextrin sulfate: electrochemical polymerization and chiroptical properties

Excess one‐handed helical poly(2‐methoxyaniline) (PMOA) was synthesized by electrochemical polymerization of 2‐methyoxy aniline in the presence of CDS. PMOA prepared at strong acidic condition shared an opposite excess one‐handed helicity against to that prepared at weak acidic condition. Through studying helix‐inducing dynamic, mechanism for helical opposition was found originating from the dynamic transfer. While predominant dynamic transferred from electrostatic interaction to H‐bonding, PMOA selectively adsorbing the opposite excess one‐handed helix. Dynamic‐transferring tests were carried out by adjusting acid and salt concentration in reaction solution, respectively. Dedoping and redoping cycle was also performed in order to study the chiroptical properties of PMOA after dedoping. The electroactivity of PMOA was checked by cyclic voltammetry. At the same time, PMOA showed interesting chiroptical properties in the states of reduction and oxidation, respectively. ICD spectra indicated that helicity and handedness were well remained in PMOA backbone after redox cycle. Copyright © 2010 John Wiley & Sons, Ltd.     

界面聚合法合成手性掺杂剂诱导螺旋形聚苯胺纳米纤维

以手性试剂D-樟脑磺酸(D-CSA)和L-樟脑磺酸(L-CSA)为掺杂剂和构象诱导剂,采用界面聚合法合成了螺旋形聚苯胺纳米纤维。通过FESEM、TEM、FTIR和UV-Vis吸收光谱等测试技术对螺旋形聚苯胺纳米纤维结构进行了表征。结果表明,所得聚苯胺纤维具有螺旋形构象,形貌均一,平均直径约为50nm,长度为300～600nm,具有较高的长径比(6:1～12:1)。在水溶液中,聚苯胺纳米纤维以伸展的螺旋形分子链构象存在,调节溶液的pH值,螺旋形聚苯胺纳米纤维表现出可逆的掺杂和脱掺杂性质。循环伏安(CV)测试表明,螺旋形聚苯胺纳米纤维在0.5mol/LHCl溶液中表现出良好的电化学活性。     

Polymer Brushes by Nitroxide‐Mediated Polymerization

This review article describes the preparation of polymer brushes by nitroxide‐mediated radical polymerization using either the ‘grafting to’ or the ‘grafting from’ approach. The use of TEMPO as a classical initiator is intensively described. More sophisticated nitroxides are also included in the discussion. Brush formation on flat surfaces such as wafers and also on particles is reported. Finally, some applications of polymer brushes are presented.

     

Electrochemical Synthesis and Optical Properties of a Chiral Poly[1,4‐bis(3′,4′‐ethylenedioxythienyl)‐phenylene] Derivative

Summary: Optically active poly[(R)‐ or (S)‐1,4‐bis(2‐(3′,4′‐ethylenedioxy)thienyl)‐2‐benzoic acid 1‐methylheptyl ester] was prepared by an electrochemical technique and characterized by circular dichroism measurements. It was found that the optical activity and optical rotation of the film could be controlled by adjusting the electronic state of the electrochemical process. Polymer films prepared in the oxidized state exhibit a weak Cotton effect, while the reduced polymer film exhibits the expected mirror‐image bisignate Cotton effect in the region of the π–π* transition of the polymer main chain. These results indicate that the main chain itself is chiral in the film state. This procedure has great potential for the preparation of functional electrochromic devices and the improved preparation of durable electrochromic devices based on the good film‐forming properties of the chiral polymer.

Cyclic voltammogram and CD spectra of the chiral polymer thin film produced here.     

A Conjugated Polymer‐Based Electrochemical DNA Sensor: Design and Application of a Multi‐Functional and Water‐Soluble Conjugated Polymer

In this work, we report the design of a new multi‐functional, water‐soluble conjugated polymer integrating both a DNA intercalator and a redox label. Based on this multi‐functional conjugated polymer, we develop a sequence‐specific electrochemical DNA sensor, where the acridine unit serves as the basis for sequence discrimination, and the ferrocene label provides the electrochemical signal. Moreover, the conjugated polythiophene helps transfer electrons from ferrocene to the electrode. This sensor provides a new way for rapid and convenient detection of DNA targets.

     

Synthesis and Polymerization of Optically Active N‐Propargylphosphonamidates: A Novel Helical Polymer Carrying a P‐Chiral Center

Summary: A diastereomeric pair of novel N‐propargylphosphonamidates, HCCCH₂NHP(O)(CH₃)O‐L ‐menthyl was synthesized by the successive condensations of methylphosphonic dichloride with L ‐menthol and propargylamine. The (R)‐P‐isomer ( 1a ) was isolated, and the absolute configuration was determined by XRD. Polymerization of 1a , and a mixture of 1a and (S)‐P‐isomer ( 1b ) was carried out with a zwitterionic Rh complex as a catalyst. cis‐Stereoregular polymers with number‐average molecular weights of 5 600–9 800 were obtained in good yields. Poly( 1a ) and poly( 1a ₂₉‐co‐ 1b ₇₁) exhibited large specific rotations (+408 and −146°), and intense Cotton effects ([θ] = +2.25 and −0.9 × 10⁴ deg · cm² · dmol⁻¹) based on the conjugated polyacetylene backbone around 325 nm in CHCl₃, indicating that these polymers have helical structures, whose predominant helical senses are opposite.

Polymerization of N‐propargylphosphonamidate.     

聚吡咯/聚合物固体电解质双层复合膜研究

在聚合物固体电解质（聚乙二醇不饱和聚酯网络－LiClO4)中进行吡咯聚合原位制得了聚吡咯／聚合物固体电解质双层复合膜。用扫描电镜观察复合膜的界面结构,用循环伏安和交流阻抗法研究了复合膜的电化学杂脱掺杂性能。结果表明,聚吡咯／聚合物固体电解质双层复合膜具有相互穿插渗透的固／固密接界面结构,这种界面结构改善了聚吡咯和聚俣物固体电解质间的界面接触,提高了聚吡咯在聚俣物固体电解质中的电化学掺杂脱掺杂性能。     

Helical chirality of π‐conjugated main‐chain induced by polymerization of phenylacetylene with chiral bulky pinanyl groups: Effects of the flexible spacer and polymerization catalyst

Three optically active phenylacetylene polymers with chiral bulky pinanyl groups, (?)‐poly[4‐(dimethylpinanylsilyl)phenylacetylene] [(?)‐poly(PSPA)], (+)‐poly{4‐[3‐(10‐pinanyl)tetramethyldisiloxy]phenylacethylene} [(+)‐poly(PDSPA)], and their copolymer [(?)‐copoly(PSPA/PDSPA)], were synthesized. We observed high chirality in the main‐chain chromophore of (?)‐poly(PSPA), due to the presence of a chiral helix, with circular dichroism spectroscopy. In contrast, (+)‐poly(PDSPA),with flexible SiOSi spacers between the chiral pinanyl group and the main chain, had lower chirality. (?)‐Poly(PSPA), with large circular dichroism signals, was prepared by polymerization with a rhodium catalyst and had a highly stereoregular main chain (high cis‐configuration percentage). However, (?)‐poly(PSPA) prepared with a tungsten catalyst had lower chirality and lower stereoregularity in the main chain. A membrane from (?)‐poly(PSPA) showed enantioselective permeability for tryptophan in an aqueous solution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1689–1697, 2002     

Electrochemical Polymerization of Brilliant Cresyl Blue and Properties of the Polymer

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｄｉｓｃｏｖｅｒｙｏｆｔｈｅｃｏｎｄｕｃｔｉｖｉｔｙｏｆｐｏｌｙａｃｅｔｙｌｅｎｅｈａｓｏｐｅｎｅｄａｎｅｗｒｅｓｅａｒｃｈｆｉｅｌｄｆｏｒｔｈｅｓｙｎｔｈｅｓｉｓｏｆｎｅｗｍａｔｅｒｉａｌｓ .Ｃｏｎｄｕｃｔｉｎｇｐｏｌｙｍｅｒｓｃａｎｂｅｓｙｎｔｈｅｓｉｚｅｄｂｙｔｈｅｃｈｅｍｉｃａｌｐｏｌｙｍｅｒｉｚａｔｉｏｎａｎｄｅｌｅｃｔｒｏｃｈｅｍｉｃａｌｐｏｌｙｍｅｒｉｚａ ｔｉｏｎ .1 7Ｔｈｅｅｌｅｃｔｒｏｃｈｅｍｉｃａｌｐｏｌｙｍｅｒｉｚａｔｉｏｎｐｒｏｖｉｄｅｓａｓ…     

Helical Carbon and Graphite Films Prepared from Helical Poly(3,4‐ethylenedioxythiophene) Films Synthesized by Electrochemical Polymerization in Chiral Nematic Liquid Crystals

Helical carbon and graphite films from helical poly(3,4‐ethylenedioxythiophene) (H‐PEDOT) films synthesized through electrochemical polymerization in a chiral nematic liquid‐crystal (N*‐LC) field are prepared. The microscope investigations showed that the H‐PEDOT film synthesized in the N*‐LC has large domains of one‐handed spiral morphology consisting of fibril bundles. The H‐PEDOT films exhibited distinct Cotton effects in circular dichroism spectra. The highly twisted N*‐LC with a helical pitch of smaller than 1 μm produced the H‐PEDOT film with a highly ordered morphology. The spiral morphologies with left‐ and right‐handed screws were observed for the carbon films prepared from the H‐PEDOT films at 800 °C and were well correlated with the textures and helical pitches of the N*‐LCs. The spiral morphologies of the precursors were also retained even in the graphite films prepared from the helical carbon films at 2600 °C.     

Crystallization‐Driven Asymmetric Helical Assembly of Conjugated Block Copolymers and the Aggregation Induced White‐light Emission and Circularly Polarized Luminescence

Controlling the self‐assembly morphology of π‐conjugated block copolymer is of great interesting. Herein, amphiphilic poly(3‐hexylthiophene)‐block‐poly(phenyl isocyanide)s (P3HT‐b‐PPI) copolymers composed of π‐conjugated P3HT and optically active helical PPI segments were readily prepared. Taking advantage of the crystallizable nature of P3HT and the chirality of the helical PPI segment, crystallization‐driven asymmetric self‐assembly (CDASA) of the block copolymers lead to the formation of single‐handed helical nanofibers with controlled length, narrow dispersity, and well‐defined helicity. During the self‐assembly process, the chirality of helical PPI was transferred to the supramolecular assemblies, giving the helical assemblies large optical activity. The single‐handed helical assemblies of the block copolymers exhibited interesting white‐light emission and circularly polarized luminescence (CPL). The handedness and dissymmetric factor of the induced CPL can be finely tuned through the variation on the helicity and length of the helical nanofibers.     

Control over Internal Structure of Liquid Crystal Polymer Nanofibers by Electrospinning

Liquid crystal polymer nanofibers with a diameter ranging from 0.13 to 4.71 µm were prepared by electrospinning from a main‐chain liquid crystalline polyester, BB‐5(3‐Me). WAXD measurements showed that the formation and orientation of the ordered structure in the electrospun fibers were controlled by the fiber diameter formed during electrospinning. For BB‐5(3‐Me), the SmA structure with two layer spacings was formed in the fiber during the electrospinning. Under optimal spinning conditions, the SmA structure is highly oriented in the fiber. In addition, annealing transformed the metastable SmA structure in the BB‐5(3‐Me) fiber into stable SmCA one.

     

苯硫酚等离子体聚会及其结构与性能

应用外部电容耦合式等离子体聚合装置．研究了苯硫酚等离子体聚合规律，找到了最佳聚合条件，通过热失重、红外光谱、X－射线衍射、电子衍射、GC－MS和接触角测定等研究了聚合物结构与性能。电导率测定表明等离子体聚苯硫酚具有半导体性质。     

DNA–Polymer Nanostructures by RAFT Polymerization and Polymerization‐Induced Self‐Assembly

Nanostructures derived from amphiphilic DNA–polymer conjugates have emerged prominently due to their rich self‐assembly behavior; however, their synthesis is traditionally challenging. Here, we report a novel platform technology towards DNA–polymer nanostructures of various shapes by leveraging polymerization‐induced self‐assembly (PISA) for polymerization from single‐stranded DNA (ssDNA). A “grafting from” protocol for thermal RAFT polymerization from ssDNA under ambient conditions was developed and utilized for the synthesis of functional DNA–polymer conjugates and DNA–diblock conjugates derived from acrylates and acrylamides. Using this method, PISA was applied to manufacture isotropic and anisotropic DNA–polymer nanostructures by varying the chain length of the polymer block. The resulting nanostructures were further functionalized by hybridization with a dye‐labelled complementary ssDNA, thus establishing PISA as a powerful route towards intrinsically functional DNA–polymer nanostructures.     

Helix‐sense‐selective copolymerization of triphenylmethyl methacrylate with chiral 2‐isopropenyl‐4‐phenyl‐2‐oxazoline

The asymmetric induction leading to a one‐handed helix was investigated in the anionic and radical copolymerization of triphenylmethyl methacrylate (TrMA) and (S)‐2‐isopropenyl‐4‐phenyl‐2‐oxazoline ((S)‐IPO), and highly isotactic copolymers with a reasonable optical activity were obtained. In the anionic copolymerization, the optical activity of the obtained copolymers depended on the polarity of solvents, and a highly optically active copolymer was produced in the copolymerization in toluene. The chiral oxazoline monomer functioned not only as a comonomer but also as a chiral ligand to endow the polymer with large negative optical rotation in the copolymerization with TrMA. The copolymers with small positive optical rotation were obtained in THF, indicating that IPO unit may work only as the chiral monomer that dictates the helical sense via copolymerization with TrMA. The isotacticity of the obtained copolymers depended on the contents of TrMA units in the copolymers, but was almost independent of the solvent for copolymerization. In the radical copolymerization, the obtained copolymers exhibited small optical activities. It seemed that the chiral monomer cannot induce one‐handed helical structure of TrMA sequences even if the sequences probably have a high isotacticity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 441–447     

2,5-二甲氧基苯胺的乳液聚合及聚合物结构表征

2;5-二甲氧基苯胺的乳液聚合及聚合物结构表征     

Direct arylation polymerization toward a narrow bandgap donor–acceptor conjugated polymer of alternating 5,6‐difluoro‐2,1,3‐benzothiadiazole and alkyl‐quarternarythiophene: From synthesis,optoelectronic properties to devices

ABSTRACT: Direct arylation polymerization (DAP) enabled facile synthesis of a narrow bandgap donor–acceptor conjugated polymer (PDFBT‐Th₄) composed of alternating 5,6‐difluoro‐2,1,3‐benzothiadiazole and alkyl‐quaternarythiophene. The optimized reaction condition of DAP catalyzed with Pd(OAc)₂/(o‐MeOPh)₃P/PivOH/K₂CO₃ in o‐xylene led to the target polymer with a number‐average molecular weight (M_n) of 14.6 kDa without noticeable homocoupling or β‐branching defects. UV‐vis absorption spectra of PDFBT‐Th₄ indicate strong interchain aggregation in films. While the C‐H selectivity and the alternating polymer structure of PDFBT‐Th₄ synthesized via DAP are comparable to those of the same type polymers synthesized via Stille coupling, the batch of PDFBT‐Th₄ synthesized via optimal DAP, despite its lower M_n, showed higher hole mobility in field effect transistors and larger power conversion efficiency in organic solar cell devices. These results further demonstrate the promising potential of DAP for efficient synthesis of high‐performance D‐A conjugated polymers for broad optoelectronic applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1869–1879