Computational studies on two novel energetic nitrogen‐rich compounds based on tetrazolone

Two novel energetic nitrogen‐rich compounds 1,4‐diaminotetrazol‐5‐one ( DATO ) and 1,4‐dinitrotetrazol‐5‐one ( DNTO ) were proposed first and studied by quantum chemistry method with B3LYP/6‐31G* level of theory. The optimized geometry, IR predicted spectrum and thermochemical parameters, frontier molecular orbitals and molecular electrostatic potential were calculated for inspecting the electronic structure, molecular stability and chemical reactivity. The important macroscopic properties including density, enthalpy of formation, detonation parameters and impact sensitivity have been predicted as well. As a result, two designed compounds DATO and DNTO possess positive enthalpy of formation (395.79 and 342.77 kJ/mol), impressive detonation parameters (D = 8.80 km/s, P = 33.69 GPa; D = 8.89 km/s, P = 34.98 GPa) superior to the remarkable explosive RDX, acceptable sensitivities and might be promising candidates of energetic materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Computational design of tetrazolone‐based high‐energy density energetic materials: Property prediction and decomposition mechanism

The density functional theory methods are used to design a series of new highly energetic tetrazolone‐based molecules by the combination of the linked tetrazolone framework and versatile substitutes. The molecular and electronic structures, physicochemical, and energetic properties were analyzed and predicted. The decomposition mechanisms were computationally simulated, and 3 potential decomposition channels were proposed. These newly designed tetrazolone‐based compounds show high densities (up to 2.08 g/cm³) and highly positive heats of formation (407.0‐1377.9 kJ/mol) due to all right content of nitrogen and oxygen. Most of them exhibit good detonation velocity (8.31‐9.62 km/s) and detonation pressure (32.40‐43.86 GPa), and some are comparative to excellent explosive CL‐20. Results show that compounds 6 , 10 , 11 , 12 , 15 , 16 , 17 , 22 , 23 , and 24 own superior detonation performance than widely used explosive HMX and may be promising candidates of green high‐performance energetic materials.     

Theoretical studies on structure and performance of [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine‐based derivatives

Based on energetic compound [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine, a series of functionalized derivatives were designed and first reported. Afterwards, the relationship between their structure and performance was systematically explored by density functional theory at B3LYP/6‐311 g (d, p) level. Results show that the bond dissociation energies of the weakest bond (N–O bond) vary from 157.530 to 189.411 kJ · mol^?1. The bond dissociation energies of these compounds are superior to that of HMX (N–NO_2, 154.905 kJ · mol^?1). In addition, H1, H2, H4, I2, I3, C1, C2, and D1 possess high density (1.818–1.997 g · cm^?3) and good detonation performance (detonation velocities, 8.29–9.46 km · s^?1; detonation pressures, 30.87–42.12 GPa), which may be potential explosives compared with RDX (8.81 km · s^?1, 34.47 GPa ) and HMX (9.19 km · s^?1, 38.45 GPa). Finally, allowing for the explosive performance and molecular stability, three compounds may be suggested as good potential candidates for high‐energy density materials. Copyright © 2016 John Wiley & Sons, Ltd.     

Computational design and screening of promising energetic materials: Novel azobis(tetrazoles) with ten catenated nitrogen atoms chain

Density functional theory methods were used to study on 2 N10 compounds, 1,1′‐azobis(tetrazole) and 1,1′‐azobis(5‐methyltetrazole). We systematically investigated 10 novel substituted azobis(tetrazoles) with 10 catenated nitrogen atoms and various energetic groups (–CF₃ 1 , –C(NO₂)₃ 3 , –N₃ 5 , –NH₂ 6 , –NHNH₂ 7 , –NHNO₂ 8 , –NO₂ 9 , –OCH₃ 10 , –OH 11 , –ONO₂ 12 ). The optimized geometry, frontier molecular orbitals, electrostatic potential, Infrared and nuclear magnetic resonance spectrum were calculated for inspecting the molecular structure and stability as well as chemical reactivity. The effects of different substituents on the density, enthalpy of formation, heat of explosion, detonation velocity and pressure, and sensitivity of the azobis(tetrazole) derivatives have been investigated. Compound 9 with nitro was found to have remarkable detonation performances (D = 9.61 km/s, P = 42.14 GPa), which are close to the excellent explosive CL‐20. Results show that compounds 1 , 3 , 4 , 7 , 9 , 11, and 12 have high potential to replace RDX. It is surprising that compounds 1 , 3 , 9, and 12 possess better energetic properties than HMX. These novel substituted azobis(tetrazoles) with unique N10 structure may be promising candidates of HEDMs with outstanding performance and acceptable sensitivities.     

Theoretical insights on a series of difluoramino group–based energetic molecules

A series of difluoramino group–based energetic molecules was designed and the relative properties were investigated by density functional theory. The results show that all the designed molecules have high positive heat of formation which ranges from 479.48 to 724.02 kJ/mol, detonation velocity ranges from 8.01 to 11.26 km/s, detonation pressure ranges from 28.03 to 63.46 GPa, and impact sensitivity ranges from 18.2 to 54.5 cm. Then, compounds D2, D3, D5, E4, E5, E6, and F2 were selected as the potential high energy density materials based on detonation properties and sensitivities. Natural bond orbital charges, electronic density, frontier molecular orbital, electrostatic potential on the surface, and thermal dynamic parameters of the screened molecules (compounds D2, D3, D5, E4, E5, E6, and F2) were also predicted at B3LYP/6‐31G(d,p) level to give a better understanding on the chemical and physical properties of them.     

Theoretical studies on the structure,sensitivity, density,thermodynamic properties and detonation performance of dinitrobitriazoles

Azodinitro- and dinitroethylene-bridged bitriazoles are of interest in the contest of high explosives, and were found to have true local energy minima at the B3LYP/aug-cc-pVDZ level of theory. The optimised structures, vibrational frequencies and thermodynamic quantities for bitriazoles were obtained in the ground state. Kamlet–Jacobs equations were used to evaluate the performance of bitriazoles based on the predicted density and the calculated heat of explosion. Detonation properties (D = 8.12 to 9.23 km s^?1 and P = 28.0 to 39.83 GPa) of bitriazoles were found to be promising compared with those of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX, D = 8.75 km s^?1 and P = 34.7 GPa) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX, D = 8.96 km s^?1 and P = 35.96 GPa). The fusion of azoles particularly appears to be a promising area for investigation, since it may lead to the desirable consequences of higher heat of explosion, higher density and thus improved detonation performance.     

Theoretical investigations on 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole derivatives as potential nitrogen‐rich high energy materials

The ―NH₂, ―NO₂, ―NHNO₂, ―C(NO₂)₃ and ―CF(NO₂)₂ substitution derivatives of 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole were studied at B3LYP/aug‐cc‐pVDZ level of density functional theory. The crystal structures were obtained by molecular mechanics (MM) methods. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. The thermal stability of the title compounds was investigated via the energy gaps (?E_{LUMO ? HOMO}) predicted. Results show that molecules T5 (D = 10.85 km·s^?1, P = 57.94 GPa) and T6 (D = 9.22 km·s^?1, P = 39.21 GPa) with zero or positive oxygen balance are excellent candidates for high energy density oxidizers (HEDOs). All of them appear to be potential explosives compared with the famous ones, octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetraazocane (HMX, D = 8.96 km·s^?1, P = 35.96 GPa) and hexanitrohexaazaisowurtzitane (CL‐20, D = 9.38 km·s^?1, P = 42.00 GPa). In addition, bond dissociation energy calculation indicates that T5 and T6 are also the most thermally stable ones among the title compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

DFT study on the effect of relative positions of methyl-, nitro- and N→oxide groups on the molecular structure,thermal/kinetic stability,crystal density,heat of decomposition and performance characteristics of triazolones

Methyl-, nitro- and N→oxide substituted triazolones are of interest in the contest of high-energy density compounds and have been found to have true local energy minima at the B3LYP/aug-cc-pVDZ level. The optimised structures, harmonic frequencies and thermodynamic values for all the model molecules have been obtained in their ground state. The velocity of detonation (D) and detonation pressure (P) have been evaluated by the Kamlet–Jacob equations using the crystal density and the heat of explosion. The estimated performance properties are higher (D = 9.92–10.27 km/s, P = 48.10–52.52 GPa) compared with 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (D = 9.20 km/s, P = 42.0 Gpa). The higher densities are possibly due to the intramolecular hydrogen bonds and the layered structures in the crystal lattice. We speculate that the calculated heat of explosion and the density are for the gas phase compounds and in the reality they should be for the solid phase which would diminish the magnitude of the calculated values. The –N→O and –NO₂ group leads to the desirable consequences of higher heat of explosion and diminished sensitivities. The substituting of N–H hydrogen atom(s) of triazolones for a –CH₃ group decreases melting point, heat of formation and density; however, the methyl group increases the thermal stability.     

A theoretical study on the stability and detonation performance of 2,2,3,3‐tetranitroaziridine (TNAD)

In recent years, there has been a considerable interest in developing high oxygen compounds as oxidizers for, for example, composite explosives. 2,2,3,3‐Tetranitroaziridine (TNAD) is a new designed compound with high oxygen balance (25.11%) and is environmentally friendly. A synthesis route of TNAD was suggested in this study, and the thermodynamic possibilities of reactions were evaluated by the changes in the free energy obtained with the density functional theory (DFT). The strong strain energy (E_s = 292.28 kJ/mol) of TNAD leads the C–C bond in the ring more fragile than the C–NO₂ bond, and the activation energy (E_a) of pyrolysis of the C–C bond (119.14 kJ/mol at the B3LYP/6‐31G* level of DFT) is higher than that of 2,4,6‐trinitrotoluene (TNT) (113.00 kJ/mol). The topological analysis with the contour maps of electron density was used to show the changes of the electron density at the critical points (BCP) in the process of homolysis of the C–C bond. In addition, the energy gap between the frontier orbitals of TNAD (ΔE_g = 5.22 eV) is slightly higher than that of 1,3,3‐trinitroazetidine (TNAZ, 5.06 eV). And the HOMO → LUMO transition plays important roles in the UV spectrum. The noncovalent interactions in the TNAD/RDX composite were estimated to be stronger than that in TNAZ/RDX, that is, the former may have better compatibility than the latter. TNAD/RDX with the weight ratio of w_TNAD/w_RDX = 0.46/0.54 has the wonderful performance (D = 9.14 km/s, P = 37.30 GPa, and I_s = 285.47 s) which is better than that (D = 8.85 km/s, P = 35.09 GPa, and I_s = 272.33 s) of TNAZ/RDX with the same weight ratio. Copyright © 2014 John Wiley & Sons, Ltd.     

Structure and detonation performance of a novel HMX/LLM‐105 cocrystal explosive

Intermolecular interactions and properties of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐ tetrazocine (HMX) / 2,6‐diamino‐3,5‐dinitropyrazine‐1‐oxide (LLM‐105) cocrystal were studied by using the dispersion‐corrected density functionals (ωB97XD, B97D) and meta‐hybrid functional (M062x) methods. Binding energies, heats of formation, thermodynamic properties, atoms in molecules, and natural bond orbital analysis were performed to investigate HMX/LLM‐105 complexes. Results show that the main intermolecular interactions between HMX and LLM‐105 are CH…O, NH…O, N…O, and O…O interactions. In addition, Monte Carlo simulation was employed to predict the crystal structure of HMX/LLM‐105 cocrystal. The HMX/LLM‐105 cocrystal is most likely to crystallize in C2/c space group, and its corresponding cell parameters are Z = 8, a = 41.63 Å, b = 6.77 Å, c = 45.63 Å, ß = 164.55°, and ρ = 1.99 g/cm³. Detonation velocity and pressure of HMX/LLM‐105 cocrystal are 8.95 km/s, 37.69GPa, a little lower than those of HMX (9.10 km/s, 37.76GPa). However, according to the net charges of nitro group, HMX/LLM‐105 cocrystal exhibits less sensitive than HMX. Finally, bond dissociation energy calculation shows that HMX/LLM‐105 complexes are thermally stable. Considering thermal stability, sensitivity, and detonation performance, HMX/LLM‐105 cocrystal meets the requirements of insensitive high energy density materials. Copyright © 2013 John Wiley & Sons, Ltd.     

Combustion effects in confined explosions

Results of shock-dispersed-fuel (SDF) explosion experiments are presented. The SDF charge consisted of a spherical 0.5-g PETN booster surrounded by 1 g of fuel, either flake aluminum (Al) powder or TNT. The charge was placed at the center of a sealed chamber. Three cylindrical chambers (volumes of 6.6, 20, and 40 l with L/D = 1) and three tunnels (L/D = 3.8, 4.65, and 12.5) were used to explore the influence of chamber volume and geometry on completeness of combustion. Detonation of the SDF charge created an expanding cloud of explosion product gases and hot fuel (Al or TNT). When this fuel mixed with air, it formed a turbulent combustion cloud that consumed the fuel and liberated additional energy (31 kJ/g for Al or 15 kJ/g for TNT) over and above detonation of the booster (6 kJ/g) that created the explosion. Static pressure gauges were the main diagnostic. Pressure and impulse histories for explosions in air were much greater than those recorded for explosions in nitrogen—thereby demonstrating that combustion has a dramatic effect on the chamber pressure. This effect increases as the confinement volume decreases and the excess air ratio approaches values between 2 and 3.5.     

Energy release effect of mixture on single spinning detonation structure

Unsteady three-dimensional numerical simulation on a single spinning detonation in a circular tube are presented in order to understand the effects of energy release of the mixture on the detonation structure. Overall structures of the spinning detonations such as the shock structure around the spin head, the long pressure trail, and the track angle on the wall are not affected by these effects because they depend on the specific heat ratio of the products which has approximately a constant value. The calculated averaged detonation velocities on the symmetry axis during one cycle decrease inversely with an exponential curve to become the value lower than the CJ detonation velocity. Those for p₀ = 0.1 MPa and p₀ = 0.01 MPa become approximately 0.98 D_CJ and 0.92 D_CJ, respectively, because the energy release in the CJ state for p₀ = 0.01 MPa is 10% lower than that for p₀ = 0.1 MPa. The state of gas behind the head of spinning detonation is also evaluated by the classical oblique shock theory and equilibrium calculation by using the track angle, shock wave angle, and detonation velocity in order to compare with the present and other researcher’s numerical results. The effects of the energy release in the mixture are large on the strength of the transverse detonation.     

Adsorption and thermodynamics studies of U(VI) by composite adsorbent in a batch system

The adsorption of U(VI) from aqueous solutions onto composite adsorbent (algistar) has been studied using a batch adsorber. The parameters that affect the U(VI) sorption, such as contact time, solution pH, initial U(VI) concentration, and temperature, have been investigated and optimized conditions determined. Equilibrium isotherm studies were used to evaluate the maximum sorption capacity of composite adsorbent, and experimental results showed this to be 43.10 mg/g. The adsorption patterns of metal ions on composite adsorbent followed the Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherms. The Freundlich, Langmuir, and D–R models have been applied, and the data correlate well with Langmuir model, and that the sorption is physical in nature (the sorption energy E _ads = 12.90 kJ/mol). Thermodynamic parameters (∆H _ads^o = −41.08 kJ/mol, ∆S _ads^o = −68.00 J/mol K, ∆G _ads (298.15 K) = −20.81 kJ/mol) showed the exothermic heat of adsorption and the feasibility of the process. The results suggested that the composite adsorbent is suitable as a sorbent material for recovery and biosorption/adsorption of uranium ions from aqueous solutions.     

EPR Equilibration Study of the O–H Bond Dissociation Enthalpy in a Benzyl Phenolic Antioxidant

The equilibrium of the reaction galvinoxyl radical + 4,4′-methylene-bis(2,6-di-tert-butyl-phenol) (IOH) ⇆ hydrogalvinoxyl + 4,4′-methylene-bis(2,6-di-tert-butyl-phenoxyl radical) was monitored by electron paramagnetic resonance spectroscopy between 213 and 293 K. The equilibrium constant was calculated for each temperature point and correlated to T ⁻¹ applying the Van't Hoff relationship lnK _R = (−ΔH _R ⁰/RT) + (ΔS _R ⁰/R). The reaction enthalpy was found to be 12.0 ± 0.9 kJ/mol and the bond strength in IOH (BDE_(O–H)) = 340.7 ± 3.0 kJ/mol. The thermochemical stabilization of the involved phenoxyls is discussed. Authors' address: Sara N. Mendiara, Departamento de Química, Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Mar del Plata, Funes 3350, Mar del Plata 7600, Argentina     

Homo‐Diels–Alder reaction of a very inactive diene,bicyclo[2,2,1]hepta‐2,5‐diene,with the most active dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione. Solvent,temperature, and high pressure influence on the reaction rate

Solvent, temperature, and high pressure influence on the rate constant of homo‐Diels–Alder cycloaddition reactions of the very active hetero‐dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione (1), with the very inactive unconjugated diene, bicyclo[2,2,1]hepta‐2,5‐diene (2), and of 1 with some substituted anthracenes have been studied. The rate constants change amounts to about seven orders of magnitude: from 3.95^.10^?3 for reaction (1+2) to 12200 L mol^?1 s^?1 for reaction of 1 with 9,10‐dimethylanthracene (4e) in toluene solution at 298 K. A comparison of the reactivity (ln k₂) and the heat of reactions (?_r‐nH) of maleic anhydride, tetracyanoethylene and of 1 with several dienes has been performed. The heat of reaction (1+2) is ?218 ± 2 kJ mol^?1, of 1 with 9,10‐dimethylanthracene ?117.8 ± 0.7 kJ mol^?1, and of 1 with 9,10‐dimethoxyanthracene ?91.6 ±0.2 kJ mol^?1. From these data, it follows that the exothermicity of reaction (1+2) is higher than that with 1,3‐butadiene. However, the heat of reaction of 9,10‐dimethylanthracene with 1 (?117.8 kJ mol^?1) is nearly the same as that found for the reaction with the structural C=C counterpart, N‐phenylmaleimide (?117.0 kJ mol^?1). Since the energy of the N=N bond is considerably lower (418 kJ/bond) than that of the C=C bond (611 kJ/bond), it was proposed that this difference in the bond energy can generate a lower barrier of activation in the Diels–Alder cycloaddition reaction with 1. Linear correlation (R = 0.94) of the solvent effect on the rate constants of reaction (1+2) and on the heat of solution of 1 has been observed. The ratio of the volume of activation (?V^≠) and the volume of reaction (?V_r‐n) of the homo‐Diels–Alder reaction (1+2) is considered as “normal”: ?V^≠/?V_r‐n = ?25.1/?30.95 = 0.81. Copyright © 2012 John Wiley & Sons, Ltd.     

DFT studies on a high-energy density cage compound 1, 3, 5, 7, 9, 11-hexo(N(CH3)NO2)-2, 4, 6, 8, 10, 12-hexaazatetracyclo[5, 5, 0, 0, 0] dodecane

The infrared and Raman spectra, heat of formation (HOF) and thermodynamic properties were investigated by B3LYP/6-31G^** method for a new designed polynitro cage compound 1,3,5,7,9,11-hexo(N(CH₃)NO₂)-2,4,6,8,10,12-hexaazatetracyclo[5,5,0,0,0]dodecane. The detonation velocity (D) and pressure (P) were predicted by the Kamlet–Jacobs equations based on the theoretical density and condensed HOF. The bond dissociation energies and bond orders for the weakest bonds were analysed to investigate the thermal stability of the title compound. The computational result shows that the detonation velocity and pressure of the title compound are superior to those of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), but inferior to those of 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane (HMX) and hexanitrohexaazaisowurtzitane (HNIW). And the analysis of thermal stability shows that the first step of pyrolysis is the rupture of the N₇–NO₂ bond. The crystal structure obtained by molecular mechanics belongs to the P2₁ space group, with the lattice parameters Z = 2, a = 11.8246 Å, b = 10.4632 Å, c = 15.9713 Å, ρ = 1.98 g cm^?3.     

On the mechanism of the zircon-reidite pressure induced transformation

We report first principles results of a detailed investigation directed to elucidate mechanistic aspects of the zircon-reidite phase transition in ZrSiO₄. The calculated thermodynamic boundary is located around 5 GPa, and the corresponding thermal barrier, estimated from temperatures at which the transition is observed at zero and high pressure, is 133 kJ/mol. Under a martensitic perspective, we examine two different transition pathways at the thermodynamic transition pressure. First, the direct, displacive-like, tetragonal I4₁/a energetic profile is computed using the c/a ratio as the transformation parameter, and yields a very high activation barrier (236 kJ/mol). Second, a quasi-monoclinic unit cell allows us to characterize a transition path from zircon (β=90^°) to reidite (β=114.51^°) with an activation barrier of around 80 kJ/mol at β=104^°. This energy is somewhat lower than our previous estimation and supports the reconstructive nature of the transformation at the thermodynamic transition pressure.     

Joint theoretical and experimental study of the gas‐phase elimination kinetics of tert‐butyl ester of carbamic,N, N‐dimethylcarbamic,N‐hydroxycarbamic acids and 1‐(tert‐butoxycarbonyl)‐imidazole

The gas‐phase elimination kinetics of the title compounds were carried out in a static reaction system and seasoned with allyl bromide. The working temperature and pressure ranges were 200–280 °C and 22–201.5 Torr, respectively. The reactions are homogeneous, unimolecular, and follow a first‐order rate law. These substrates produce isobutene and corresponding carbamic acid in the rate‐determining step. The unstable carbamic acid intermediate rapidly decarboxylates through a four‐membered cyclic transition state (TS) to give the corresponding organic nitrogen compound. The temperature dependence of the rate coefficients is expressed by the following Arrhenius equations: for tert‐butyl carbamate logk₁ (s^?1) = (13.02 ± 0.46) – (161.6 ± 4.7) kJ/mol(2.303 RT)^?1, for tert‐butyl N‐hydroxycarbamate logk₁ (s^?1) = (12.52 ± 0.11) – (147.8 ± 1.1) kJ/mol(2.303 RT)^?1, and for 1‐(tert‐butoxycarbonyl)‐imidazole logk₁ (s^?1) = (11.63 ± 0.21)–(134.9 ± 2.0) kJ/mol(2.303 RT)^?1. Theoretical studies of these elimination were performed at Møller–Plesset MP2/6‐31G and DFT B3LYP/6‐31G(d), B3LYP/6‐31G(d,p) levels of theory. The calculated bond orders, NBO charges, and synchronicity (Sy) indicate that these reactions are concerted, slightly asynchronous, and proceed through a six‐membered cyclic TS type. Results for estimated kinetic and thermodynamic parameters are discussed in terms of the proposed reaction mechanism and TS structure. Copyright © 2007 John Wiley & Sons, Ltd.     

Multiparameter kinetic analysis of alkaline hydrolysis of a series of aryl diphenylphosphinothioates: models for P=S neurotoxins

Alkaline hydrolysis of a series of X‐substituted‐phenyl diphenylphosphinothioates ( 2a‐i ) in 80 mol%/20 mol% DMSO at 25.0 ± 0.1°C has been studied kinetically and assessed through a multiparameter approach. Substrates 2a to 2i are approximately 12 to 22 times less reactive than their P=O analogues 1a to 1i (ie, the thio effect). The Brønsted‐type plot for the reactions of 2a to 2i is linear with β_lg = ?0.43, consistent with a concerted mechanism. Hammett plots correlated with σ^o and σ^? constants also support a concerted mechanism; the Yukawa‐Tsuno plot results in an excellent linear correlation with ρ_X = 1.26 and r = 0.30, indicating that expulsion of the leaving group occurs in the rate‐determining step (RDS). The ΔH^? value increases from 10.5 to 11.7 and 13.9 kcal/mol as substituent X in the leaving group changes from 3,4‐(NO₂)₂ to 4‐NO₂ and H, in turn, while TΔS^? remains constant at ?6.0 kcal/mol. The strong dependence of ΔH^? on the electronic nature of substituent X also indicates that the leaving group departs in the RDS. The reaction mechanism and origin of the thio effect are discussed by comparison of the current kinetic results with those reported for the reactions of 1a to 1i . The results suggest that for useful OP neurotoxins the mechanism of abiotic hydrolysis is concerted (with varying degrees of asynchronicity) when the substrate bears good leaving groups.