Synthesis,photopolymerization, and adhesive properties of hydrolytically stable phosphonic acid‐containing (meth)acrylamides

Three novel dental monomers containing phosphonic acid groups ( 1a and 2a , based on diethyl amino(phenyl)methylphosphonate and 3a based on diethyl 1‐aminoheptylphosphonate) were synthesized in two steps: the reaction of α‐aminophosphonates with acryloyl chloride (for monomers 1a and 3a ) or methacryloyl chloride (for 2a ) to give monomers with phosphonate groups, and the hydrolysis of phosphonate groups by using trimethyl silylbromide. Their (and the intermediates') structures were confirmed by FTIR, ¹H, ¹³C, and ³¹P NMR spectroscopy. All the monomers dissolve well in water (1<pH<2) and are hydrolytically stable. Their homo‐ and copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate were investigated with photo‐DSC. Thermal polymerization of the new monomers in water or in ethanol/water solution was investigated, giving polymers in good yields. X‐ray diffraction results showed only dicalcium phosphate dehydrate formation upon interaction of 1a ‐ 3a with hydroxyapatite indicating its strong decalcification and that monomer‐Ca salts are highly soluble. Some results were also compared to those with a bisphosphonic acid‐containing methacrylamide ( 4a ) previously reported; and the influence of monomer structure on polymerization/adhesive properties is discussed. These properties, especially hydrolytic stability and good rates of polymerization, make these new monomers suitable candidates as components of dental adhesive mixtures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 511–522     

Synthesis and evaluations of bisphosphonate‐containing monomers for dental materials

Two new bismethacrylamide ( 1 , 2 ) and two new methacrylamide ( 3 , 4 ) dental monomers were synthesized. In each group, one monomer contains a bisphosphonate group, the other a bisphosphonic acid group. Monomer 1 and 3 were synthesized by amidation of 2‐(2‐chlorocarbonyl‐allyloxymethyl)‐acryloylchloride and methacryloyl chloride with tetraethyl aminomethyl‐bis(phosphonate) and converted to the bisphosphonic acid monomers 2 and 4 by hydrolysis with trimethylsilyl bromide. Monomer 1 (m.p.: 71–72 °C), monomer 3 ( 33–34 °C), and monomer 4 (no m.p.) were obtained as white solids and monomer 2 a viscous liquid, soluble in water. Homopolymerization of 1 gave crosslinked polymers, indicating its low cyclization tendency. The photopolymerization studies indicated that its copolymerizability with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane and 2‐hydroxyethyl methacrylate (HEMA) without changing their rates and conversions significantly means that it could be used as a biocompatible crosslinker. Although monomer 2 showed low polymerizability, because of its good performance in terms of solubility, hydrolytic stability, hydroxyapatite interaction, acidity, and copolymerizability with HEMA, it shows potential to be used in self‐etching dental adhesives. The thermal polymerization of 3 resulted in soluble polymers and evaluation of monomer 4 in terms of solubility, acidity, and copolymerizability with HEMA indicated its potential as an adhesive monomer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and photopolymerizations of first monomers with phosphonate and bisphosphonate or phosphonic and bisphosphonic acid functionalities for potential dental applications

The first monomers containing both phosphonate and bisphosphonate (M1) or phosphonic and bisphosphonic acid (M2) functionalities are synthesized, aiming to improve binding abilities of self-etching adhesive systems and composites: An amine having both phosphonate and bisphosphonate functionalities is prepared via Michael addition reaction between diethyl (6-aminohexyl)phosphonate and tetraethyl vinylidene bisphosphonate, its reaction with 2-isocyanatoethyl methacrylate gives M1 which is converted to M2 by selective dealkylation of the phosphonate/bisphosphonate ester groups. Their copolymerization with commercial dental monomers (bisphenol A glycidyl methacrylate, triethylene glycol dimethacrylate, and 2-hydroxyethyl methacrylate) investigated by photo-differential scanning calorimetry shows adequate photopolymerization rate and conversion. X-ray diffraction, Fourier transform infrared, and X-ray photoelectron spectroscopy analyses of M2-treated hydroxyapatite particles show formation of stable M2-calcium salts. These monomers are assessed to be not toxic according to MTT standards by in vitro cytotoxicity studies with NIH 3T3, U2OS, and Saos-2 cells. All these properties make these monomers potential candidates as biocompatible components for dental adhesives and composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2739–2751     

Synthesis,photopolymerization, and adhesive properties of new bisphosphonic acid monomers for dental application

Four new monomers, 3‐(N‐methylacrylamido)propylidenebisphosphonic acid, 3‐(N‐propyl‐acrylamido)propylidenebisphosphonic acid, 3‐(N‐hexylacrylamido)propylidenebisphosphonic acid, and 3‐(N‐octylacrylamido)propylidenebisphosphonic acid, have been synthesized in good yields and fully characterized by ¹H, ¹³C, ³¹P NMR, and HRMS. The copolymerization of these monomers with N,N′‐diethyl‐1,3‐bis(acrylamido)propane (DEBAAP) has been investigated with differential scanning calorimetry. These mixtures show a higher reactivity than DEBAAP. New self‐etch dental primers, based on these acrylamide monomers, have been formulated. Dentin shear bond strength measurements have shown that primers based on these bisphosphonic acids assure a strong bond between the tooth substance and a dental composite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5258–5271, 2009     

New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Synthesis and polymerizations of phosphonated‐bis(methacrylamide)s for dental applications

Novel phosphonate and phosphonic acid‐containing bis(methacrylamide)s were synthesized. The phosphonate‐containing monomers ( 1a and 1b ) were synthesized by amidation of 2‐(2‐chlorocarbonyl‐allyloxymethyl)‐acryloylchloride with diethyl 2‐aminoethylphosphonate and diethyl 1‐aminomethylphosphonate. The phosphonic acid‐containing monomers ( 2a and 2b ) were synthesized by hydrolysis of 1a and 1b with trimethylsilyl bromide (TMSBr). All monomers were liquids and dissolved in water and ethanol. Thermal homopolymerization of 1a and 1b in bulk and solution using 2,2′‐azobis(isobutyronitrile) (AIBN) at 80 °C gave crosslinked polymers indicating low cyclization tendencies of these monomers. They were also homopolymerized using photo‐DSC with 2,2′‐dimethoxy‐2‐phenyl acetophenone (DMPA) as photoinitator, and their maximum rates of polymerization were found to be higher than commercial monomers 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (Bis‐GMA) and 2‐hydroxyethyl methacrylate (HEMA), indicating their potential as reactive diluents or crosslinkers in dental materials. In fact, copolymerization with monomer 1a resulted in improvements in photopolymerization kinetics of both Bis‐GMA and HEMA. The acidic nature of the aqueous solutions (pH of 2a : 1.42, 2b : 1.53), stability under aqueous conditions after 1 month of study at 37 °C, interaction of 2a with hydroxyapatite (HAP) as representative of both monomers, and copolymerizability of the same with HEMA make these monomers suitable as adhesive monomers in dental adhesives, although their low observed reactivities may present a drawback. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and stability study of dental monomers containing methacrylamidoethyl phosphonic acids

Three new dental monomers containing methacrylamidoethyl phosphonic acids were synthesized. The structures of the synthesized monomers were determined with electrospray mass spectrometry (ESMS), Fourier transform infrared, and NMR. The hydrolytic stabilities of the synthesized monomers and a commercial monomer, 2‐methacryloyloxyethyl phosphoric acid (MEP; used as a control), were studied with flow injection (FI)/ESMS, ¹H NMR, and ³¹P NMR analysis of a CD₃OD/D₂O (4:1 v/v) solution of each monomer before and after storage at 60 °C for 2 months. The ¹H NMR and ³¹P NMR chemical shifts of the monomers 2‐methacrylamidoethylphosphonic acid ( I ) and N,N′‐[4,4′‐(propane‐2,2‐diyl)‐bis(phenoxy‐2‐hydroxypropyl)]‐bis(2‐methacrylamidoethylphosphonic acid) ( II ) showed little change after storage at 60 °C for 2 months, but those of MEP changed significantly. FI/ESMS also showed that MEP was nearly completely decomposed, whereas monomers I and II remained largely intact. MEP could react with H₂ZrF₆ to form ternary zirconium fluoride complexes that were partially soluble in methanol, but all the monomers containing phosphonic acids formed precipitates. This study demonstrates that ESMS is a more sensitive and effective method than NMR for studying the hydrolytic stability or degradation of dental monomers. The new monomers containing methacrylamidoethyl phosphonic acids have higher hydrolytic stability than methacrylate phosphate monomers and may be used in dental bonding agents and other dental materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 99–110, 2007     

Synthesis,photopolymerization and adhesive properties of new hydrolytically stable phosphonic acids for dental applications

Novel monomers 2‐(N‐methylacrylamido)ethylphosphonic acid, 6‐(N‐methylacrylamido)hexylphosphonic acid, 10‐(N‐methylacrylamido)decylphosphonic acid, and 4‐(N‐methylacrylamidomethyl)benzylphosphonic acid have been prepared in good yields for use in dental adhesives. They have been fully characterized by ¹H‐NMR, ¹³C‐NMR, ³¹P ‐ NMR, and by HRMS. All monomers are hydrolytically stable in aqueous solution. Free radical homopolymerizations of these monomers have been carried out in solution of ethanol/water (2.5/1:v/v), using 2,2′‐azo(2‐methylpropionamidine) dihydrochloride (AMPAHC) as initiator. They lead to homopolymers in moderate to excellent yields. Structure of the polymers has been confirmed by SEC/MALLS and ¹H‐NMR spectra. The photopolymerization behavior of the synthesized monomers with N,N′‐diethyl‐1,3‐bis(acrylamido)propane has been investigated by DSC. New self‐etch primers, based on these acrylamide monomers, have been formulated. Dentin shear bond strength measurements have shown that primers based on (N‐methylacrylamido)alkylphosphonic acids assure a strong bond between the tooth substance and a dental composite. Moreover, the monomer with the longest spacer group provides the highest shear bond strength. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7074–7090, 2008     

Synthesis and characterization of novel fluoride‐releasing monomers. II. Dimethacrylates containing bis(aminodiacetic acid) and their ternary zirconium fluoride complexes

Novel dimethacrylate monomers containing bis(aminodiacetic acid) chelating ligands with or without additional hydroxyl groups were synthesized, starting from 2,2‐bis(4‐hydroxy‐3‐methylphenyl)propane. The structures of the monomers were characterized by electrospray mass spectrometry (ESMS), ¹H NMR, and ¹³C NMR. The structures and relative stability of fluoride‐releasing monomers containing one or more ternary zirconium fluoride complex moieties were studied by ESMS. The most stable ternary zirconium fluoride complex was in the form of [LZrF]^?, where H₄L is the monomer containing bis(aminodiacetic acid) without additional hydroxyl groups. The synthesized monomer was photopolymerized with camphorquinone and 1‐phenyl‐1,2‐propane‐dione as initiators and N,N‐dimethylaminoethyl methacrylate as the accelerator. The fluoride release, fluoride recharge, compressive strength, and flexure strength were tested on the experimental dental composite containing 13.7 wt % synthesized monomer and three commercial flowable dental composites. The results showed that the experimental composite has significantly higher fluoride release and recharge capabilities than the commercial flowable composites. The compressive strength was comparable to that of the commercial materials. The water sorption and solubility met the requirement of the ISO Specification 4049. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3153–3166, 2005     

Novel Bisphosphonates Derived from 1H‐Indazole, 1H‐Pyrazolo[3,4‐b]Pyridine,and 1H‐Pyrazolo[3,4‐b]Quinoline

Novel tetraethyl ethylene‐1,1‐bisphosphonate esters derived from 1H‐indazole, 1H‐pyrazolo[3,4‐b]pyridine, and 1H‐pyrazolo[3,4‐b]quinoline were synthesized by a Michael addition reaction of tetraethyl ethylidene‐1,1‐bisphosphonate with the corresponding heterocycle, using conventional heating and microwave‐assisted methods. The microwave‐assisted method provides shorter reaction times and better yields. The hydrolysis of bisphosphonates afforded the corresponding bisphosphonic acids or salt, using concentrated hydrochloric acid or TMSBr/collidine, respectively. All new compounds were fully characterized, and their structures were assigned using ¹H, ³¹P, and ¹³C NMR and IR spectroscopies and mass spectrometry. The molecular structure of compound 6 was confirmed by X‐ray diffraction studies.     

Synthesis and evaluation of new dental monomers with both phosphonic and carboxylic acid functional groups

Novel dental monomers containing both phosphonic and carboxylic acid functional groups were prepared. The monomers were based on t‐butyl α‐bromomethacrylate (t‐BuBMA) and synthesized in three steps: The reaction of o‐hydroxyaryl phosphonates [diethyl (2‐hydroxyphenyl) phosphonate, tetraethyl (2,5‐dihydroxy‐1,4‐phenylene) diphosphonate and tetraethyl 5,5′‐(propane‐2,2‐diyl)bis(2‐hydroxy‐5,1‐ phenylene) diphosphonate] with t‐BuBMA, the hydrolysis of phosphonate groups to phosphonic acid using trimethyl silylbromide, and the hydrolysis of the t‐butyl groups to carboxylic acid with trifluoroacetic acid. The monomers were solids and soluble in water and ethanol. The structures of the monomers were determined by Fourier transform infrared (FTIR), ¹H, ¹³C, and ³¹P nuclear magnetic resonance (NMR) spectroscopy. The copolymerization behaviors of the synthesized monomers with glycerol dimethacrylate were first investigated in bulk using photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as photoinitiator. Then, the solution copolymerization of the monomers with acrylamide in ethanol and water was studied, indicating that the synthesized monomers are incorporated into the copolymers. The acidic nature of the aqueous solutions of these monomers (pH values 1.72–1.87) is expected to give them etching properties important for dental applications. The interaction of the monomers with hydroxyapatite was investigated using ¹³C NMR and FTIR techniques. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1953–1965, 2009     

Synthesis and photopolymerizations of new phosphonated monomers for dental applications

Three novel phosphonated methacrylate monomers have been synthesized and studied for use in dental applications. Two of the monomers were synthesized from the reactions of glycidyl methacrylate (GMA) with (diethoxy‐phosphoryl)‐acetic acid (monomer 1 ) and (2‐hydroxy‐ethyl)‐phosphonic acid dimethyl ester (monomer 2 ). These monomers showed high crosslinking tendencies during thermal bulk and solution polymerizations. The third monomer (monomer 3 ) was prepared by the reaction of bisphenol A diglycidylether (DER) with (diethoxy‐phosphoryl)‐acetic acid and subsequent conversion of the resulting diol to the methacrylate with methacryloyl chloride. The homopolymerization and copolymerization behaviors of the synthesized monomers were also investigated with glycerol dimethacrylate (GDMA), triethylene glycol dimethacrylate (TEGDMA), and 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (bis‐GMA) using photodifferential scanning calorimetry at 40 °C using 2,2′‐dimethoxy‐2‐phenyl acetophenone (DMPA) as photoinitiator. Monomer 1 showed polymerization rate similar or greater than dimethacrylates studied here but with higher conversion. The maximum rate of polymerizations decreased in the following order: 1 ～TEGDMA>GDMA～bis‐GMA～ 3 > 2 . A synergistic effect in the rate of polymerization was observed during copolymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2290–2299, 2008     

Elastomeric polyurethanes modified with geminal bisphosphonate groups

Three types of elastomeric segmented polyurethanes represented by a polyether‐urethane, a polyurethane‐urea, and a polycarbonate‐urethane were introduced into a modified low‐temperature variant of base‐induced N‐alkylation of urethane hard segments with an excess of 1,6‐dibromohexane in N,N′‐dimethylacetamide (DMAc), resulting in the modification of polymers with 0.08–0.26 mmol/g of pendant 6‐bromohexyl groups. Either lithium diisopropylamide (LDA) or sodium hydride was used to initiate the reaction, although LDA was found to be more suitable for the bromoalkylation. Selected bromoalkylated polyurethanes of all three types were reacted with thiol‐containing bisphosphonates, to yield the polymers modified with 0.08–0.12 mmol/g of geminal nonesterified covalently attached bisphosphonate groups. Two thiol‐containing geminal bisphosphonates used in the modifications were prepared via reactions of nucleophilic addition to vinylidene‐bisphosphonic acid. All three types of polyurethanes were found equally suitable for the modifications. The bisphosphonate‐modified polyurethanes with nonmetallic cations on the bisphosphonate groups remain soluble in the solvents suitable for the dissolution of nonmodified polymers and can be processed into films by solvent casting. After the exchange of nonmetallic cations to sodium, the polymers become insoluble in any solvent, probably as a result of the intermolecular coordination of bisphosphonate groups with the metal cations. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 105–116, 2001     

Synthesis and modeling of new phosphorus‐containing acrylates

New methacrylate monomers containing phosphonic acid or both phosphonic and carboxylic acids were synthesized through the reaction of t‐butyl α‐bromomethyl acrylate with triethyl phosphite followed by the selective hydrolysis of the phosphonate or t‐butyl ester groups with trimethylsilyl bromide and trifluoroacetic acid. The copolymerization of these monomers with 2‐hydroxyethylmethacrylate was investigated with photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as a photoinitiator. Quantum mechanical tools were also used to understand the mechanistic behavior of the polymerization reactions of these synthesized monomers. The propagation and chain‐transfer reactions were considered and rationalized. A strong effect of the monomer structure on the rate of polymerization was observed. The polymerization reactivities of the monomers increased with decreasing steric hindrance and/or increasing hydrogen‐bonding capacity because of the hydrolysis of the phosphonate and the t‐butyl ester groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2574–2583, 2005     

Synthesis and evaluation of new phosphonic acid‐functionalized acrylamides with potential biomedical applications

Phosphorus‐containing acidic monomers are able to interact with the inorganic phase of mineralized tissues such as enamel, dentin, and bone. From this perspective, three phosphonic acid‐containing acrylamide monomers with different lengths of alkyl chains were synthesized to be used for both self‐etching dental adhesives and mineralized hydrogel scaffolds. Monomers were synthesized by the reaction of α‐aminophosphonates (diethyl aminomethylphosphonate, diethyl 2‐aminobutan‐2‐ylphosphonate, and diethyl 2‐aminooctan‐2‐ylphosphonate) with acryloyl chloride followed by the hydrolysis of phosphonate groups by using trimethylsilyl bromide. The properties such as pH in the range of mild self‐etching adhesives, hydrolytic stability, high rate of copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate, giving high‐molecular‐weight polymers on thermal polymerization, and strong decalcification ability of hydroxyapatite make these monomers good candidates for self‐etching adhesives, although no appreciable effect of the number and size of the α‐substituents was observed. Hydrogel scaffolds containing phosphonic acid groups were fabricated, characterized, and mineralized. Altogether, the results suggest that these phosphonic acid‐containing monomers have suitable properties to be used in fabrication of biomaterials for both dental and bone tissue engineering applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2755–2767     

Block copolymer preparation by atom transfer radical polymerization under emulsion conditions using a nanoprecipitation technique

Living‐radical polymerization of acrylates were performed under emulsion atom transfer radical polymerization (ATRP) conditions using latexes prepared by a nanoprecipitation technique previously employed and optimized for the polymerization of styrene. A macroinitiator of poly(n‐butyl acrylate) prepared under bulk ATRP was dissolved in acetone and precipitated in an aqueous solution of Brij 98 to preform latex particles, which were then swollen with monomer and heated. Various monomers (i.e. n‐butyl acrylate, styrene, and tert‐butyl acrylate) were used to swell the particles to prepare homo‐ and block copolymers from the poly(n‐butyl acrylate) macroinitiator. Under these conditions latexes with a relatively good colloidal stability were obtained. Furthermore, amphiphilic block copolymers were prepared by hydrolysis of the tert‐butyl groups and the resulting block copolymers were characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The bulk morphologies of the polystyrene‐b‐poly(n‐butyl acrylate) and poly(n‐butyl acrylate)‐b‐poly(acrylic acid) copolymers were investigated by atomic force microscopy (AFM) and small angle X‐ray scattering (SAXS). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 625–635, 2008     

Acrylate based anticorrosion films using novel bis‐phosphonic methacrylates

Two novel phosphonated methacrylate monomers were successfully synthesized and subsequently incorportated into adhesion/anticorrosive coatings. Specifically, they were propyl N,N‐tetramethyl‐bis(phosphonate)‐2‐hydroxyl‐bis(methylene) amine methylmethacrylate (MAC₃NP₂) and 2‐[2,2‐bis(diisopropoxyphosphoryl)ethoxy]‐methylmethacrylate, (MAC₃P₂). The phosphonic forms of each monomer were blended with ～85% w.w acrylates (tripropyleneglycol‐diacrylate and hexanediol‐diacrylate) and 6% w.w of the photo sensitive initiator Darocur®. Along with a monophosphonic monomer synthesized in a previous publication (MAC₃P), they were polymerized on Q‐panels under ultraviolet light, and then subject to the salt spray test (ca. 0.5 mol/L NaCl at 35 °C) for a duration of up to 50 days. The results indicate that acrylate blends with low concentration of the bisphosphonic compound MAC₃P₂ have excellent resistance to corrosion, thus excellent adhesive properties. Importantly, these coatings were formed without the use of a hydrophobic polymer matrix or solvents. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7972–7984, 2008     

The role of TEOS‐TIP within a pentablock ionomer: Morphology,physical properties,and ion transport

Inorganic–organic nanocomposites were created using tetraethylorthosilicate (TEOS), titanium isopropoxide (TIP), and poly(t‐butylstyrene‐b‐hydrogenated isoprene‐b‐sulfonated styrene‐b‐hydrogenated isoprene‐b‐t‐butylstyrene) or pentablock copolymer (PBC). A TEOS–TIP–H₂O ternary phase diagram was generated to create homogenous sol solutions with designable condensation reactions that led to controllable materials. An inorganic TEOS–TIP network was synthesized using sol–gel chemistry within the organic PBC domain. All TEOS–TIP–PBC films exhibited higher water sorption than unmodified PBC ionomer that was attributed to a change in morphology. Proton conductivity increased up to 80% due to TEOS–TIP within the nanocomposite film. This can be attributed to ion domain redistribution and partial charge transfer from the titanate's inorganic domains to sulfonate groups that promote acid dissociation. PBC had a microphase‐separated morphology that changed with increasing TIP concentration, which was observed from atomic force microscopy and small‐angle X‐ray scattering results. Finally, thermal gravimetric analysis revealed a decrease in degradation temperature, and dynamic mechanical analysis results demonstrated reduced polymer chain mobility caused by inorganic–organic interactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 575–586     

Development of reactive methacrylates based on glycidyl methacrylate

Six methacrylate monomers have been synthesized for use as reactive diluents in dental composites and evaluated to investigate the relationship between molecular structure and monomer reactivity. Four were synthesized by reactions of glycidyl methacrylate (GMA) with various acids, 2‐(2‐methoxyethoxy)acetic acid ( 1 ), 2‐(2‐(2‐methoxyethoxy)ethoxy)acetic acid ( 2 ), cyanoacetic acid ( 3 ), and benzoic acid ( 4 ); others were synthesized by reactions of GMA with diethyl hydrogen phosphate ( 5 ) or methanol ( 6 ). Monomers 1 and 2 are novel, 3 seems to be novel, 4 and 6 were synthesized via a novel method, and the synthesis of 5 was described in the literature. The monomers showed high crosslinking tendencies during thermal bulk polymerizations. The photo‐, homo‐, and copolymerization behavior of the monomers with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy)phenyl]propane (Bis‐GMA) were investigated. The maximum rate of polymerizations of monomers 2 – 6 was found to be greater than triethyleneglycol dimethacrylate, Bis‐GMA, 2‐hydroxyethyl methacrylate, and glycerol dimethacrylate. For the more reactive monomers ( 2 , 3 , and 4 ), the oxygen sensitivity of polymerization was found to be low due to a hydrogen abstraction/chain transfer reaction. The computationally calculated dipole moment and lowest unoccupied molecular orbital energies indicated that there seems to be a correlation between these quantities and reactivity for ester linked monomers ( 1 – 5 ), which was also supported by ¹³C NMR data. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3787–3796, 2010