Synthesis of hyperbranched polymers with precise conjugation length

A set of AB₂ type monodisperse conjugated oligomers carrying two bromo functional groups and one boronic ester functional group were prepared by iterative deprotection and Sonogashira cross‐coupling reactions. Suzuki polycondensation of these AB₂ type monodisperse oligomers afforded hyperbranched polymers. The hyperbranched conjugated polymers we prepared possess not only precisely controlled conjugation length like monodisperse conjugated oligomers but also the structural feature of hyperbranched polymers. Optical property investigation demonstrated that the maximum absorption and emission wavelength red‐shifted along with the increasing of the conjugation length between the two branching points and the hyperbranched structure could effectively reduce the aggregation of the conjugated polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1084–1092, 2007     

Thermoresponsive hyperbranched polymers via In Situ RAFT copolymerization of peg‐based monomethacrylate and dimethacrylate monomers

Here we report the preparation of PEG‐based thermoresponsive hyperbranched polymers via a facile in situ reversible addition‐fragmentation chain transfer (RAFT) copolymerization using bis(thiobenzoyl) disulphide to form 2‐cyanoprop‐2‐yl dithiobenzoate in situ. This novel one‐pot in situ RAFT approach was studied firstly using methyl methacrylate (MMA) monomer, then was used to prepare thermoresponsive hyperbranched polymers by copolymerization of poly(ethylene glycol) methyl ether methacrylate (PEGMEMA, M_n = 475), poly(propylene glycol) methacrylate (PPGMA, M_n = 375) and up to 30 % of ethylene glycol dimethacrylate (EGDMA) as the branching agent. The resultant PEGMEMA‐PPGMA‐EGDMA copolymers from in situ RAFT were characterized by Gel Permeation Chromatography (GPC) and ¹H‐NMR analysis. The results confirmed the copolymers with multiple methacrylate groups and hyperbranched structure as well as RAFT functional residues. These water‐soluble copolymers with tailored compositions demonstrated tuneable lower critical solution temperature (LCST) from 22 °C to 32 °C. The phase transition temperature can be further altered by post functionalization via aminolysis of RAFT agent residues in polymer chains. Moreover, it was demonstrated by rheological studies and particle size measurements that these copolymers can form either micro‐ or macro photocrosslinked gels at suitable concentrations due to the presence of multiple methacrylate groups. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3751–3761     

Reduction‐cleavable hyperbranched polymers with limited intramolecular cyclization via click chemistry

In this contribution, we present new reduction‐cleavable hyperbranched disulfide bonds‐containing poly(ester triazole)s with limited intramolecular cyclization, which can be synthesized by the Cu(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) of A₂ monomer of dipropargyl 3,3′‐dithiobispropionate and B₃ monomer of tris(hydroxymethyl)ethane tri(4‐azidobutanoate). The hyperbranched poly(ester triazole)s possess numerous terminal groups and weight‐average molecular weight up to 20,400 g mol^?1 with a polydispersity index in the range 1.57–2.17. The CuAAC introduces rigid triazole units into the backbones of hyperbranched poly(ester triazole)s and reduces intramolecular cyclization, which is proved by topological analysis and ¹H NMR spectroscopy. The disulfide bonds on backbones endow the reduction‐cleavable feature to the hyperbranched poly(ester triazole)s at the presence of dithiothreitol. It gives a novel and convenient methodology for the synthesis of reduction‐responsive functional polymer with controlled topologies, and the reduction‐cleavable hyperbranched poly(ester triazole)s with limited intramolecular cyclization are expected to possess potential in the application of stimuli‐responsive anticancer drug nanocarriers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2374–2380     

Polysiloxanes polymers with hyperbranched structure and multivinyl functionality

Hyperbranched polysiloxane polymers with multivinyl functionality were designed and synthesized through a “one‐step and one‐pot” deactivation enhanced atom transfer polymerization (DE‐ATRP) approach from the copolymerization of polydimethylsiloxane (PDMS) macromonomers and divinylbenzene (DVB). Various feed ratios of siloxane‐based monomer and divinyl monomers were investigated. We showed that even at DVB concentrations as high as 80 mol % in the feed, 65% yield of hyperbranched polymer could be obtained without gelation because the DE‐ATRP suppressed the rapid formation of macronetwork structures. The molecular weight, polydispersity, macromolecular structure of hyperbranched poly(DVB‐co‐PDMS) as well as its viscosity in silicone oil were characterized by GPC‐MALLS, ¹H NMR and rheometer. By tracking the relationship between the radius of gyration, elution volume and molecular weight from MALLS analysis, solid evidences of the highly branched and condensed structure of the polymers were obtained. Furthermore, the oil thickening experiments demonstrate that this hyperbranched polymer can act as a well‐controlled viscosity‐modifier for Silicone oils, which potentially will have important application in coating, cosmetic and pharmaceutical products. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of hyperbranched polyphenylenes using aryl dichloride monomers by Suzuki polycondensation

Advanced microelectronic fabrication requires stable organic materials that can be used under extreme conditions such as high temperatures. In this study, hyperbranched polyphenylenes (HBPs) were synthesized as stable and soluble polymers via the Suzuki polycondensation of 2‐(3,5‐dichlorophenyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane (Bpin‐Cl) and 3,5‐dichlorophenylboronic acid (BOH‐Cl) in the presence of palladium acetate and 2‐(2′,6′‐dimethoxybiphenyl) dicyclohexylphosphine (SPhos). Soluble polymers having an average molecular weight in the range of 11 000 to 31 000 g/mol were obtained through the polymerization of chloride monomers. The degree of branching was determined to be 50% through inverse‐gated decoupling ¹³C NMR measurements. The chloride‐terminated HBP showed a temperature of 402°C for 1% weight loss (T_d1%) after the sample was purified via precipitation from an N‐methyl‐2‐pyrrolidone (NMP) solution and then thermally treated at 260°C for 3 hours. This thermal stability is higher than that of the HBPs synthesized from the corresponding bromide monomers. Moreover, after heating at 260°C, the sample was found to be soluble in organic solvents. The chlorinated terminal groups played an important role in achieving good solubility after heating. This unique property is attractive for non‐volatile or temporary coating materials used in microelectronic fabrication.     

超支化分子桥联受阻酚抗氧化剂的合成与表征

以正十八胺为核的1.0代超支化大分子和β-(3,5-二叔丁基-4-羟基苯基)丙酰氯为原料,通过酰胺化缩合反应,合成了一种具有长链烷基和2个受阻酚基团的新型超支化分子桥联受阻酚类抗氧化剂.通过正交实验确定了超支化分子桥联受阻酚类抗氧化剂的最佳合成体系为:3,5-丙酰氯为酰化剂、K_2CO_3为缚酸剂、苯和水为反应溶剂.通过条件优化实验确定了超支化分子桥联受阻酚类抗氧化剂的最佳合成条件为:3,5-丙酰氯与1.0代超支化大分子的物质的量比为6∶1、反应温度为25 ℃、反应时间为12 h、体系苯与水体积比为6∶1、3,5-丙酰氯与缚酸剂K_2CO_3的物质的量比为1∶1,在此条件下,超支化分子桥联受阻酚类抗氧化剂的收率高达75.5%.FT-IR和1H NMR证实了合成抗氧化剂的化学结构与其理论结构相符.超支化分子桥联受阻酚类抗氧化剂在聚乙烯树脂中的抗氧化性能优于抗氧化剂1076,且随着烷基链长度的增加,抗氧化性能增强.     

Synthesis and properties of hyperbranched polyurethanes,hyperbranched polyurethane copolymers with and without ether and ester groups using blocked isocyanate monomers

Starting from 3,5‐diamino benzoic acid, 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzyl ether, an AB₂‐type blocked isocyanate monomer with flexible ether group, and 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzoate, an AB₂‐type blocked isocyanate monomer with ester group, were synthesized for the first time. Using the same starting compound, 3,5‐bis{(benzoxycarbonyl)imino}benzylalcohol, an AB₂‐type blocked isocyanate monomer, was synthesized through a highly efficient short‐cut route. Step‐growth polymerization of these monomers at individually optimized experimental conditions results in the formation of hyperbranched polyurethanes with and without ether and ester groups. Copolymerizations of these monomers with functionally similar AB monomers were also carried out. The molecular weights of the polymers were determined using GPC and the values (M_w) were found to vary from 1.5 × 10⁴ to 1.2 × 10⁶. While hyperbranched polyurethanes having no ether or ester group were found to be thermally stable up to 217 °C, hyperbranched poly(ether–urethane)s and poly(ester–urethane)s were found to be thermally stable up to 245 and 300 °C, respectively. Glass transition temperature (T_g) of polyurethane was reduced significantly when introducing ether groups into the polymer chain, whereas T_g was not observed even up to 250 °C in the case of poly(ester–urethane). Hyperbranched polyurethanes derived from all the three different AB₂ monomers were soluble in highly polar solvents and the copolymers showed improved solubility. Polyethylene glycol monomethyl ether of molecular weight 550 and decanol were used as end‐capping groups, which were seen to affect the thermal, solution, and solubility properties of polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3877–3893, 2007     

Synthesis and characterization of highly stable blue‐light‐emitting hyperbranched conjugated polymers

Polyfluorene homopolymer ( P1 ) and its carbazole derivatives ( P2 – P4 ) have been prepared with good yield by Suzuki coupling polymerization. P2 is an alternating copolymer based on fluorene and carbazole; P3 is a hyperbranched polymer with carbazole derivative as the core and polyfluorene as the long arms; P4 is a hyperbranched polymer with carbazole derivative as the core and the alternating fluorene and carbazole as the long arms. These polymers show highly thermal stability, and their structures and physical properties are studied using gel permeation chromatography, ¹H NMR, ¹³C NMR, elemental analysis, Fourier transform infrared spectroscopy, thermogravimetry, UV–vis absorption, photoluminescence, and cyclic voltammetry (CV). The influence of the incorporation of carbazole and the hyperbranched structures on the thermal, electrochemical, and electroluminescent properties has been investigated. Both carbazole addition and the hyperbranched structure increase the thermal and photoluminescent stability. The CV shows an increase of the HOMO energy levels for the derivatives, compared with polyfluorene homopolymer ( P1 ). The EL devices fabricated by these polymers exhibit pure blue‐light‐emitting with negligible low‐energy emission bands, indicating that the hyperbranched structure has a strong effect on the PLED characteristics. The results imply that incorporating carbazole into polyfluorene to form a hyperbranched structure is an efficient way to obtain highly stable blue‐light‐emitting conjugated polymers, and it is possible to adjust the property of light‐emitting polymers by the amount of carbazole derivative incorporated into the polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 790–802, 2008     

The preparation of hyperbranched aromatic and aliphatic polyether epoxies by chloride‐catalyzed proton transfer polymerization from ABn and A2 + B3 monomers

Hyperbranched polymers consisting of aromatic or aliphatic polyether cores and epoxide chain‐end peripheries were prepared by proton transfer polymerization. AB₂ diepoxyphenol monomer 1 proved to be well suited for the preparation of hyperbranched aromatic polymer 2 by this proton transfer polymerization. The use of chloride‐ion catalysis, rather than conventional base catalysis, for the preparation of polymers from diepoxyphenol 1 offered a unique method to control the ultimate molecular weight of the polymer product through variations of the initial concentration of monomer 1 in tetrahydrofuran. An alternative route to hyperbranched polyether epoxies made use of commercially available or easily prepared aliphatic monomers of the types AB₂, AB₃, and A₂ + B₃. Although these aliphatic polymerizations can be initiated with a base, chloride‐ion catalysis proved most effective for controlling the polymerization. The hyperbranched epoxies were characterized by NMR spectroscopy, gel permeation chromatography, and multi‐angle laser light scattering. Chemical modification of the polymers after polymerization was carried out via nucleophilic addition on the epoxide groups or derivatization of the hydroxy substituents within the hyperbranched polymer structure. Spectroscopic measurements suggested that some such ring‐opened materials may adopt reverse unimolecular micellar structures in appropriate solution environments. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4850–4869, 2000     

Membrane preparation from hyperbranched perfluorinated polymers

In this research, membrane formation with hyperbranched perfluorinated polymers (HBFP) was investigated. To create a tough membrane, HBFP was blended and crosslinked with a tougher linear polymer. Blending only or crosslinking only was not sufficient to create a tough membrane, but combining blending with crosslinking was successful. Miscibility, phase separation, and thermal and mechanical properties were evaluated for a variety of systems. By using a toughening linear polymer with lower polarity, reduced phase separation and improved mechanical properties were seen. Overall, imidazole‐containing HBFPs produced the clearest and toughest blends. These new hyperbranched ionomers and copolymers are strong candidates for future use in anhydrous proton exchange membranes. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 961–972     

Castor oil based hyperbranched urethane acrylates and their performance as UV-curable coatings

Castor oil (CO) based hyperbranched urethane acrylates (HBUAs), namely C10-IH and C20-IH, were synthesized by modifying the hydroxyl groups of first (C10)- and second (C20)-generation of CO-based hyperbranched polyesters with isocyanate-bearing semi-adducts (IPDI-HEA). Herein, the C10 and C20 polyesters were prepared using the renewable CO as a B₃ core molecule and dimethylolpropionic acid as an AB₂ monomer via a pseudo-one-pot condensation procedure. For comparison, a CO-based urethane acrylate (CO-IH) was synthesized by directly modifying the hydroxyl groups of CO with IPDI-HEA. The structure-property relationship of the UV-cured films was investigated in detail. Consequently, the number of terminal urethane acrylates greatly influenced their final properties. The tensile strength of the C20-IH based UV-cured sample could be improved by 129% in comparison with the CO-IH based sample, and its pencil hardness reached up to 7H. Furthermore, the chemical resistance tests and the morphology study proved that the C20-IH based UV-cured coatings exhibited excellent chemical stability and superb microstructure. These improvements can be attributed to the unique oligomer architecture that combined the structural features of hyperbranching, castor oil chains and multiple urethane acrylates.     

Synthesis of a novel one‐pot approach of hyperbranched polyurethanes and their properties

A new method for the synthesis of hyperbranched polymers involving the use of AB_x macromonomers containing linear units have been investigated. Two types of novel hyperbranched polyurethanes have been synthesized by a one‐pot approach. The structures of monomers and polymers were characterized by elemental analysis, ¹H NMR, ¹³C NMR, Fourier transform infrared spectroscopy, gel permeation chromatography, and thermogravimetric analysis. The hyperbranched polymers have been proven to be extremely soluble in a wide range of solvents. Polymer electrolytes were prepared with hyperbranched polymer, linear polymer as the host, and lithium perchlorate (LiClO₄) as the ion source. Analysis of the isotherm conductivity dependence of the ion concentration indicated that these hyperbranched polymers could function as a “solvent” for the lithium salt. The conductivity increased with the increasing concentration of hyperbranched polymers in the host polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 344–350, 2002     

Synthesis and characterization of hyperbranched aromatic polyamide copolymers prepared from AB2 and AB monomers

A series of hyperbranched aromatic polyamide copolymers has been prepared and characterized from direct polycondensation of AB₂ and AB monomers. Structure of the monomers and the molar ratio of AB₂/AB showed strong influence on the properties of resulting copolymers. A small amount of AB₂ branching unit improved markedly the solubility of the resulting copolymer. Mark-Houwink parameters of the copolymers were essentially independent of the mole ratio of the monomers. The physical and mechanical properties of resulting copolymers were influenced not only by the mole ratio of monomers, but also by the structure of the monomers employed.     

痕量动物油和植物油的区分检验研究

采用碱催化甲酯化的前处理方法,应用气相色谱-质谱联用技术对动物油和植物油的区分检验进行了研究。实验检出了6种主要脂肪酸:肉豆蔻酸、棕榈油酸、棕榈酸、亚油酸、油酸、硬脂酸。分析了动物油与植物油在成分及相对含量上的差异,并且找出了动物油和植物油在不饱和度上的差别。根据动物油与植物油的差异点,可以对动物油和植物油进行区分。     

Synthesis and applications of hyperbranched polymers

The development of hyperbranched polymers is a rapidly expanding field in the area of macromolecular science. This short review highlights some of the notable examples in the synthesis of hyperbranched polymers and some of the key advances that have been made in the application of these hyperbranched materials in the areas of material property modifications and in high value technologies.     

Synthesis,characterization, and surface properties of amide amine oxides based on natural vegetable oil

Two types of novel amine oxide surfactants, castor oil amide amine oxide and cottonseed oil amide amine oxide, have been successfully synthesized via a two-step synthetic route with mild reaction conditions, the chemical structures of which were confirmed by mass spectra (MS) and FTIR spectra. Their surface activities have been measured. The results show that these synthesized amide amine oxide surfactants reduced the surface tension of water to a minimum value of approximately 32.48 mN/m at a concentration of 5.06?×?10^?5?mol/L. It was also found that these novel amide amine oxide surfactants exhibited strong emulsifying power.     

Ligand effect in the synthesis of hyperbranched polymers via copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP)

Copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP) of AB₂ monomers demonstrated a chain-growth mechanism without any external ligand because of the complexation of in situ formed triazole groups with Cu catalysts. In this study, we explored the use of various ligands that affected the polymerization kinetics to tune the polymers’ molecular weights and the degree of branching (DB). Eight ligands were studied, including polyethylene glycol monomethyl ether (PEG₃₅₀, M_n = 350), tris(benzyltriazolylmethyl)amine (TBTA), 2,6-bis(1-undecyl-1H-benzo[d]imidazol-2-yl)pyridine (Py(DBim)₂), 2,2′-bipyridyl (bpy), 4,4′-di-n-nonyl-2,2′-bipyridine (dNbpy), N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), N,N,N′,N″,N″-penta(n-butyl)diethylenetriamine (PBuDETA), and N,N,N′,N″,N″-pentabenzyldiethylenetriamine (PBnDETA). All ligands except PEG₃₅₀ exhibited stronger coordination with Cu(I) than the polytriazole polymer, which freed the Cu catalyst from polymers and resulted in dominant step-growth polymerization with simultaneous chain-growth feature. Meanwhile, the use of PEG₃₅₀ ligand retained the confined Cu in the polymer, demonstrating a chain-growth mechanism, but lower polymer molecular weights as compared with the no-external-ligand polymerization. Results indicated that aliphatic substituent groups on ligands had little effect on the molecular weights and DB of the polymers, but rigid aromatic substituent groups decreased both values. By varying the ligand species and amounts, hyperbranched polymers with DB value ranging from 0.53 ([TBTA]₀/[Cu]₀ = 5) to 0.98 ([PMDETA]₀/[Cu]₀ = 2) have been achieved. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2238–2244     

Using 2D NMR to determine the degree of branching of complicated hyperbranched polymers

Degree of branching (DB) is a crucial structure parameter of hyperbranched polymers, which can be determined by 1H NMR, quantitative 13C NMR, degradative method, etc. However, for complicated hy-perbranched polymers, intricate structure and severe overlap of spectral signals hinder the determina-tion of DB using traditional methods. In this work, the architecture of complicated hyperbranched polymers has been elucidated with the help of 2D NMR techniques. Using such a method, overlapped NMR signals can be well separated into a two-dimensional space, and additional structural information is also available. Correspondingly, quantitative analysis for complicated systems can be realized. De-termination of DBs for three types of complicated hyperbranched polymers synthesized from step-polymerization, self-condensation vinyl polymerization and self-condensation ring-opening po-lymerization is shown as examples.     

Synthesis of water-soluble hyperbranched polymer and its application in acrylic latex

A water-soluble hyperbranched polymer (WHBP), obtained from a second generation of hyperbranched polyester and maleic anhydride, was studied. Its effects on the properties of acrylic latexes, which were based on emulsion polymerization of butyl acrylate (BA), methyl methacrylate (MMA), acrylic acid (AA) and WHBP, and latex film were discussed. The characteristics of WHBP were determined by nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared (FTIR) and gel permeation chromatography (GPC). Particle size and morphology of latex particles were confirmed by dynamic light scattering (DLS) and transmission electron microscope (TEM). The investigation showed that WHBP could be used in emulsion polymerization, and that latex of poly(BA-MMA-WHBP) was more stable than that of poly(BA-MMA-AA). The hardness of latex film increased from 2B to HB when WHBP was used.     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913