Scalable ambient synthesis of water‐soluble poly(β‐hydroxythio‐ether)s

Proton transfer polymerization through thiol‐epoxy “click” reaction between commercially available and hydrophilic di‐thiol and di‐epoxide monomers is carried out under ambient conditions to furnish water‐soluble polymers. The hydrophilicity of monomers permitted use of aqueous tetrahydrofuran as the reaction medium. A high polarity of this solvent system in turn allowed for using a mild catalyst such as triethylamine for a successful polymerization process. The overall simplicity of the system translated into a simple mixing of monomers and isolation of the reactive polymers in an effortless manner and on any scale required. The structure of the resulting polymers and the extent of di‐sulfide defects are studied with the help of 13C‐ and ¹H‐NMR spectroscopy. Finally, reactivity of the synthesized polymers is examined through post‐polymerization modification reaction at the backbone sulfur atoms through oxidation reaction. The practicality, modularity, further functionalizability, and water solubility aspects of the described family of new poly(β‐hydroxythio‐ether)s is anticipated to accelerate investigations into their potential utility in bio‐relevant applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3381–3386     

RAFT polymerization of alternating styrene‐pentafluorostyrene copolymers

Reversible addition‐fragmentation chain‐transfer (RAFT) polymerization was used to control the alternating copolymerization of styrene and 2,3,4,5,6‐pentaflurostyrene. The RAFT polymerization yields a high degree of control over the molecular weight of the polymers and does not significantly influence the reactivity ratios of the monomers. The controlled free‐radical polymerization could be initiated using AIBN at elevated temperatures or using a redox couple (benzoyl peroxide/N,N‐dimethylaniline) at room temperature, while maintaining control over molecular weight and dispersity. The influence of temperature and solvent on the molecular weight distribution and reactivity ratios were investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1555–1559     

Synthesis,characterization, and ion‐complexing properties of polymers displaying densely packed arrays of crown‐ethers as lateral substituents

We report the synthesis and ion‐binding properties of four poly(crown‐ethers) displaying either one or two crown‐ethers (15‐crown‐5 or 18‐crown‐6) on every third carbon alongside the backbone. The polymers were synthesized by living anionic ring‐opening polymerization of disubstituted cyclopropane‐1,1‐dicarboxylates monomers. Cation binding of the polychelating polymers and corresponding monomers to Na⁺ and K⁺ was evaluated by picrate extraction and isothermal calorimetry titration. This novel family of poly(crown‐ethers) demonstrated excellent initial binding of the alkali ions to the polymers, with a higher selectivity for potassium. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2337–2345     

Synthesis of n‐alkyl methacrylate polymers with pendant carbazole moieties and their derivatives

New methacrylate monomers with carbazole moieties as pendant groups were synthesized by multistep syntheses starting from carbazoles with biphenyl substituents in the aromatic ring. The corresponding polymers were prepared using a free‐radical polymerization. The novel polymers contain N‐alkylated carbazoles mono‐ or bi‐substituted with biphenyl groups in the aromatic ring. N‐alkyl chains in polymers vary by length and structure. All new polymers were synthesized to evaluate the structural changes in terms of their effect on the energy profile, thermal, dielectric, and photophysical properties when compared to the parent polymer poly(2‐(9H‐carbazol‐9‐yl)ethyl methacrylate). According to the obtained results, these compounds may be well suited for memory resistor devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 70–76     

Synthesis and polymerization of styrene monomers bearing spiroorthoester structure and volume change during crosslinking by double ring‐opening of the pendant spiroorthoesters of the obtained polymers

Novel styrene monomers bearing a five or seven‐membered spiroorthoester structure (SOE5, SOE7) were synthesized and their radical polymerizations as well as volume change during crosslinking of the obtained polymers were investigated. SOE5 and SOE7 were prepared from 4‐vinylbenzyl glycidyl ether and γ‐butyrolactone or ε‐caprolactone using boron trifluoride diethyl ether complex as a catalyst, respectively. Radical polymerizations of these monomers using 2,2′‐azobisisobutyronitrile (AIBN) gave the corresponding styrene‐based polymers with keeping the spiroorthoester structures unchanged. These polymers could be transformed to networked polymers by heating with a sulfonium antimonate, a thermally latent cationic polymerization initiator. Copolymerization of SOE5 or SOE7 with styrene at various compositions was carried out to efficiently obtain the corresponding copolymers, respectively. These polymers and copolymers showed little volume shrinkage or slight volume expansion during the crosslinking. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1790–1795     

Synthesis and photophysical properties of soluble low‐bandgap thienothiophene polymers with various alkyl side‐chain lengths

We report the facile synthesis and characterization of a class of thienothiophene polymers with various lengths of alkyl side chains. A series of 2‐alkylthieno[3,4‐b]thiophene monomers (Ttx) have been synthesized in a two‐step protocol in an overall yield of 28–37%. Poly(2‐alkylthieno[3,4‐b]thiophenes) (PTtx, alkyl: pentyl, hexyl, heptyl, octyl, and tridecyl) were synthesized by oxidative polymerization with FeCl₃ or via Grignard metathesis (GRIM) polymerization methods. The polymers are readily soluble in common organic solvents. The polymers synthesized by GRIM polymerization method (PTtx‐G) have narrower molecular weight distribution (?) with lower molecular weight (M_n) than those synthesized by oxidative polymerization (PTtx‐O). The band structures of the polymers with various lengths of alkyl side chains were investigated by UV–vis spectroscopy, cyclic voltammetry, and ultraviolet photoelectron spectroscopy. These low‐bandgap polymers are good candidates for organic transistors, organic light‐emitting diodes, and organic photovoltaic cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Michael addition polymerizations of difunctional amines (AA′) and triacrylamides (B3)

Novel hyperbranched poly(amido amine)s containing tertiary amines on the backbones and acryl or secondary amines as the surface groups were successfully synthesized via the Michael addition polymerizations of a triacrylamide [1,3,5‐triacryloylhexahydro‐1,3,5‐triazine (TT)] and a difunctional amine [n‐butylamine (BA)] NMR techniques were used to clarify the structures of hyperbranched polymers and polymerization mechanism. The reactivity of the secondary amine formed in situ was much lower than that of the primary amines in BA. When the feed molar ratio was 1:1 TT/BA, the secondary amine formed in situ was almost kept out of the reaction before the BA (AA′) and TT (B₃) monomers were consumed, and this led to the formation of A′B₂ intermediates containing one secondary amine group and two acryl groups. The self‐polymerization of the A′B₂ intermediates produced hyperbranched polymers bearing acryl as surface groups. For the polymerization with the feed molar ratio of 1:2 TT/BA, A′₂B intermediates containing one acryl group and two secondary amine groups were accumulated until self‐polymerization started; the self‐polymerization of the intermediates formed hyperbranched polymers with secondary amines as their surface groups. Modifications of surface functional groups were studied to form new hyperbranched polymers. The hyperbranched poly(amido amine)s were amorphous. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6226–6242, 2006     

Synthesis of asymmetrically substituted head‐to‐head polyacetylenes from 2,3‐disubstituted‐1,3‐butadienes

Asymmetrically substituted head‐to‐head polyacetylenes with phenyl and triphenylamine, thienyl or pyrenyl side groups were synthesized through anionic or controlled radical polymerization of 2,3‐disubstituted‐1,3‐butadienes and subsequent dehydrogenation process. Anionic polymerizations of the designed monomers bearing pendent triphenylamine and thienyl group gave narrow disperse disubstituted precursor polybutadienes with exclusive 1,4‐ or 4,1‐structure, which were confirmed by GPC and NMR measurements. In addition, the monomers possessing pyrenyl group were polymerized via nitroxide mediated radical polymerization and the resulting polymers were obtained with controlled molecular weight and low polydispersities. These polybutadiene precursors were then dehydrogenated in the presence of 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone. Thus asymmetrically substituted head‐to‐head polyacetylenes were obtained as indicated by ¹H NMR. The properties of polybutadiene precursors and the corresponding polyacetylenes were analyzed by UV–vis, DSC, and TGA. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 395–402     

Free radical ring‐opening polymerization of cyclic allylic sulfides: Liquid monomers with low polymerization volume shrinkage

The free radical polymerization of four methylated cyclic allylic sulfides was examined with reference to their polymerization volume shrinkage and the effect of ring size on reactivity. The compounds examined were 2‐methyl‐5‐methylene‐1,3‐dithiane ( 5 ) (solid), 2‐methyl‐6‐methylene‐1,4‐dithiepane ( 6 ) (liquid), 6‐methyl‐3‐methylene‐1,5‐dithiacyclooctane ( 7 ) (liquid), and 6,8‐dimethyl‐3‐methylene‐1,5‐dithiacyclooctane ( 8 ) (liquid). The monomers were stable materials not requiring any special handling or storage conditions. They were polymerized in bulk using thermal azobisisobutyronitrile (AIBN, VAZO88) and photochemical initiators (Ciba DAROCUR 1173) and in benzene solutions (AIBN, 70 °C). The six‐membered ring monomer 5 was unreactive whereas seven‐membered ring monomer 6 polymerized to high conversion in bulk. In addition, 6 did not polymerize in benzene solution at 70 °C at [ 6 ] = 1.25M. Eight‐membered ring monomers 7 and 8 polymerized in bulk to complete conversion with thermal and photochemical initiators to give lightly crosslinked materials. Near complete conversion to soluble polymers could be obtained in solution polymerizations in benzene. Soluble polymers were also obtained in photochemical initiated bulk polymerizations by lowering initiator concentrations or length of irradiation. The methyl substituent had no effect on which allylic carbon–sulfur bond fragmented in the ring‐opening step. The polymerization volume shrinkages of monomers 7 and 8 were 1.5 and 2.4% respectively and together with monomer 4 (1.5–2.0% shrinkage) are the best available liquid free radical ring‐opening monomers that can be polymerized in bulk at room temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 202–215, 2001     

Synthesis and polymerizability of CN monomers

The synthesis and polymerizability of imine C?N monomers is surveyed. The investigated imines were either far more reactive than similarly substituted C?C or C?O monomers, or too stable to polymerize. Imines with electron‐attracting substituents on N favor polymerization by anionic mechanism, but led only to low molecular weight polymers. Imines with a donor substituent on N, such as N‐arylmethyleneimines, polymerized by cationic or anionic mechanism. 1‐ and 2‐Aza‐1,3‐butadienes were also rather unstable and polymerized to oligomers. The symmetrically substituted 2,3‐diaza‐1,3‐butadienes could be purified and polymerized successfully using anionic initiators, resulting in both 1,4‐ and 1,2‐structures in the polymer backbone, depending on the substituents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Facile synthesis of hyperbranched polyimides from A2 + BB′2 monomers

Facile syntheses of hyperbranched polyimides were realized by the polymerization of A₂ + BB^′₂ monomers, 2,2‐bis(3,4‐dicarboxylphenyl) hexafluoropropane dianhydride (6FDA) + 2,4,6‐triaminopyrimidine (TAP), performed by mixing the monomers together in N‐methylpyrrolidone at 17% w/v concentrations with molar ratios of 6FDA:TAP ranging from 1:1 to 2:1. The lower reactivity of 2‐amino as compared with 4‐/6‐amino in TAP, demonstrated by ¹H NMR, was probably the main reason for no gelation formed during the polymerization although monomer conversions surpassed the theoretical gel points. Fourier transform infrared spectroscopy and NMR were used to verify the structures of the obtained polymers. ¹H NMR analysis indicated the degrees of branching (DB) of the polymers increased from 36 to 83% with the molar ratios of 6FDA:TAP increasing from 1:1 to 2:1. Molecular weights were determined by gel permeation chromatography, and inherent viscosities were measured. Glass‐transition temperature values, determined by differential scanning calorimetry, decreased when DB increased, and thermogravimetric analysis reflected the excellent thermal stability of the obtained hyperbranched polyimides. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4563–4569, 2002     

Anionic polymerization of 4‐phenyl‐1‐buten‐3‐yne derivatives bearing electron‐withdrawing groups

The anionic polymerization of derivatives of 4‐phenyl‐1‐buten‐3‐yne was carried out to investigate the effect of substituents on the polymerization behavior. The polymerization of 4‐(4‐fluorophenyl)‐1‐buten‐3‐yne and 4‐(2‐fluorophenyl)‐1‐buten‐3‐yne in tetrahydrofuran at −78 °C with n‐BuLi/sparteine as an initiator gave polymers consisting of 1,2‐ and 1,4‐polymerized units in quantitative yields with ratios of 80/20 and 88/12, respectively. The molecular weights of the polymers were controlled by the ratio of the monomers to n‐BuLi, and the distribution was relatively narrow (weight‐average molecular weight/number‐average molecular weight < 1.2), supporting the living nature of the polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1016–1023, 2001     

Synthesis and characterization of tris(2,2′‐bipyridine)ruthenium‐cored star‐shaped polymers via RAFT polymerization

A new bipyridine‐functionalized dithioester was synthesized and further used as a RAFT agent in RAFT polymerization of styrene and N‐isopropylacrylamide. Kinetics analysis indicates that it is an efficient chain transfer agent for RAFT polymerization of the two monomers which produce polystyrene and poly(N‐isopropylacrylamide) polymers with predetermined molecular weights and low polydispersities in addition to the end functionality of bipyridine. The bipyridine end‐functionalized polymers were further used as macroligands for the preparation of star‐shaped metallopolymers. Hydrophobic polystyrene macroligand combined with hydrophiphilic poly(N‐isopropylacrylamide) was complexed with ruthenium ions to produce amphiphilic ruthenium‐cored star‐shaped metallopolymers. The structures of these synthesized metallopolymers were further elucidated by UV–vis, fluorescence, size exclusion chromatography (SEC), and differential scanning calorimetry (DSC) as well as NMR techniques. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4225–4239, 2007     

Redox initiated cationic polymerization of oxetanes

3,3‐Disubstituted oxetane monomers were found to undergo rapid, exothermic redox initiated cationic ring‐opening polymerization in the presence of a diaryliodonium or triarylsulfonium salt oxidizing agent and a hydrosilane reducing agent. The redox reaction requires a noble metal complex as a catalyst and several potential catalysts were evaluated. The palladium complex, Cl₂(COD)Pd^II, was observed to provide good shelf life stability while, at the same time, affording high reactivity in the presence of a variety of hydrosilane reducing agents. A range of structurally diverse oxetane monomers undergo polymerization under redox cationic conditions. When a small amount of an alkylated epoxide was added as a “kick‐start” accelerator to these same oxetanes, the redox initiated cationic polymerizations were extraordinarily rapid owing to the marked reduction in the induction period. A mechanistic interpretation of these results is offered. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1854–1861     

Controlling supramolecular polymerization through multicomponent self‐assembly

The self‐assembly into supramolecular polymers is a process driven by reversible non‐covalent interactions between monomers, and gives access to materials applications incorporating mechanical, biological, optical or electronic functionalities. Compared to the achievements in precision polymer synthesis via living and controlled covalent polymerization processes, supramolecular chemists have only just learned how to developed strategies that allow similar control over polymer length, (co)monomer sequence and morphology (random, alternating or blocked ordering). This highlight article discusses the unique opportunities that arise when coassembling multicomponent supramolecular polymers, and focusses on four strategies in order to control the polymer architecture, size, stability and its stimuli‐responsive properties: (1) end‐capping of supramolecular polymers, (2) biomimetic templated polymerization, (3) controlled selectivity and reactivity in supramolecular copolymerization, and (4) living supramolecular polymerization. In contrast to the traditional focus on equilibrium systems, our emphasis is also on the manipulation of self‐assembly kinetics of synthetic supramolecular systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 34–78     

Polymerization of cyclic imino ethers: From its discovery to the present state of the art

Topics concerning the cationic ring‐opening polymerization of cyclic imino ethers and functional material production based on the resulting polymers are reviewed. Cyclic imino ethers are readily subjected to isomerization polymerization via cationic initiators. Mechanistic studies have provided a new concept, electrophilic polymerization. Double isomerization polymerization and no‐catalyst alternating copolymerization are interesting examples that show characteristics of the ring opening of cyclic imino ethers. The living polymerization of these monomers affords precisely controlled polymeric materials. Through the use of the unique properties of the product polymers, various functional polymeric materials, such as polymeric nonionic surfactants, compatibilizers, hydrogels, stabilizers for dispersion polymerization, biocatalyst modifiers, and supramolecular assemblies, have been developed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 192–209, 2002     

Synthesis of a polyurea from a glucose‐ or mannose‐containing N‐alkyl urea peptoid oligomer

N‐alkyl urea peptoid oligomers containing glucose or mannose have been synthesized and characterized. The oligomers were subsequently polymerized using a step‐growth polymerization with hexamethylene diisocyanate. Equal moles of both monomers were used to guarantee high‐molecular weight polymers. The polymers were characterized by gel permeation chromatography, nuclear magnetic resonance, and Fourier‐transform infrared spectroscopy, and contact angle measurements of solvent cast thin films. Sulfation of the final polymers was achieved using a SO₃/pyridine complex in pyridine to afford the heparin biomimetics. The average degree of sulfation was calculated to be 3.5 sulfates per saccharide as measured by elemental analysis. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5230–5238     

Facile synthesis and characterization of hyperbranched poly(ether amide)s generated from Michael addition polymerization of in situ created AB2 monomers

A new straightforward strategy for synthesis of novel hyperbranched poly (ether amide)s from readily available monomers has been developed. By optimizing the reaction conditions, the AB₂‐type monomers were formed dominantly during the initial reaction stage. Without any purification, the AB₂ intermediate was subjected to further polymerization in the presence (or absence) of an initiator, to prepare the hyperbranched polymer‐bearing multihydroxyl end‐groups. The influence of monomer, initiator, and solvent on polymerization and the molecular weight (MW) of the resultant polymers was studied thoroughly. The MALDI–TOF MS of the polymers indicated that the polymerization proceeded in the proposed way. Analyses of ¹H NMR and ¹³C NMR spectra revealed the branched structures of the polymers obtained. These polymers exhibit high‐moderate MWs and broad MW distributions determined by gel permeation chromatography (GPC) in combination with triple detectors, including refractive index, light scattering, and viscosity detectors. In addition, the examination of the solution behavior of these polymers showed that the values of intrinsic viscosity [η] and the Mark–Houwink exponent α were remarkably lower compared with their linear analogs, because of their branched nature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4309–4321, 2007     

Synthesis and polymerizations of six aminophosphonate‐containing methacrylates

Two different groups of novel aminophosphonate‐containing methacrylates were synthesized. The route to the first group involves reactions of ethyl α‐bromomethacryate (EBBr) and t‐butyl α‐bromomethacryate (TBBr) with diethyl aminomethylphosphonate and diethyl 2‐aminoethylphosphonate. Bulk and solution polymerizations at 60–80 °C with 2,2′‐azobis(isobutyronitrile) (AIBN) gave crosslinked or soluble polymers depending on monomer structure and polymerization conditions. Increasing bulkiness from ethyl to t‐butyl decreases the polymerization rate, correlated well with the chemical shift differences of double bond carbons and consistent with the lower molecular weights of t‐butyl ester polymers (M_n = 1800–7900 vs. 50,000–72,000). The route to the second group involves the Michael addition reaction between diethyl aminomethylphosphonate and diethyl 2‐aminoethylphosphonate with 3‐(acryloyloxy)‐2‐hydroxypropyl methacrylate (AHM) to give secondary amines. The photopolymerization using differential scanning calorimeter showed that these monomers have similar or higher reactivities than AHM, even though AHM has two double bonds. The high rates of polymerization of these monomers were attributed to both hydrogen bonding interactions due to additional NH groups as well as chain transfer reactions. All the homopolymers obtained produced char (17–35%) on combustion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Catalytic [2 + 2 + 2] cycloaddition polymerization of diyne–nitrile monomers in the presence of CoCl2‐6H2O/diphosphine/Zn

Cobalt‐catalyzed [2 + 2 + 2] cocycloaddition reaction of 1,6‐diynes and nitriles to generate substituted pyridines has been applied to the polymerization of diyne–nitrile monomers, the reaction of which proceeded smoothly in a step‐growth fashion to provide linear polymers comprising pyridine structures in the main chain. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 345–351