Role of electron correlation in the polydeprotonation of benzene to form trianions

Computations for anion, dianions, and trianions of benzene are carried out to study the role of electron correlation in the polydeprotonation of benzene leading to benzene trianions both in the singlet and triplet states. The computations, while assessing the use of polarization and diffuse functions, are performed with Møller–Plesset second‐order (MP2) perturbation theory and coupled‐cluster theory up to the level of CCSD(T)/6‐311++G(d,p)//MP2/6‐311++G(d,p), and with density functional theory (DFT) employing a hybrid, B3LYP, and a meta‐hybrid, M05‐2X, exchange‐correlation functionals with Gaussian basis set 6‐311++G(d,p) and correlation consistent basis set aug‐cc‐pVDZ. The deprotonation energies, including zero‐point energy correction, of benzene anion and dianions are found to be highly sensitive to the quantum mechanical method and the basis set used. The formation of dianions and trianions, where the anionic centers lie adjacent to each other, is observed with unusual behavior in the deprotonation energy and the geometrical parameters obtained from the different level of the theories. The two exchange‐correlation functionals compared show contrasting and unusual results for the trianionic species particularly for the triplet states, even if the diffuse functions are included in the basis set. Besides this, the ortho‐dianion and 1,3,5‐trianion are predicted to be ground‐state triplet at CCSD(T)/6‐311++G(d,p)//MP2/6‐311++G(d,p) and DFT/M05‐2X/6‐311++G(d,p) levels, whereas DFT/B3LYP/6‐311++G(d,p) predicts meta‐dianion and 1,2,3‐trianion to be ground‐state triplet where all the anionic centers lie adjacent to each other. Copyright © 2014 John Wiley & Sons, Ltd.     

The gas phase oxidation of HCOOH by Cl and NH2 radicals. Proton coupled electron transfer versus hydrogen atom transfer*

ABSTRACT

The reaction of formic acid (HCOOH) with chlorine atom and amidogen radical (NH₂) have been investigated using high level theoretical methods such BH&HLYP, MP2, QCISD, and CCSD(T) with the 6–311?+?G(2df,2p), aug-cc-pVTZ, aug-cc-pVQZ and extrapolation to CBS basis sets. The abstraction of the acidic and formyl hydrogen atoms of the acid by the two radicals has been considered, and the different reactions proceed either by a proton coupled electron transfer (pcet) and hydrogen atom transfer (hat) mechanisms. Our calculated rate constant at 298?K for the reaction with Cl is 1.14?×?10^?13?cm³?molecule^?1?s^?1 in good agreement with the experimental value 1.8?±?0.12/2.0?×?10^?13?cm³?molecule^?1?s^?1 and the reaction proceeds exclusively by abstraction of the formyl hydrogen atom, via hat mechanism, producing HOCO+ClH. The calculated rate constant, at 298?K, for the reaction with NH₂ is 1.71?×?10^?15?cm³?molecule^?1?s^?1, and the reaction goes through the abstraction of the acidic hydrogen atom, via a pcet mechanism, leading to the formation of HCOO+NH₃.     

Theoretical study of the hydrogen abstraction reaction of CH3OH with NCO

A direct dynamics method is employed to study the mechanism and kinetics of the hydrogen abstraction reaction of CH₃OH with NCO. The optimized geometries and frequencies of the stationary points and the minimum-energy paths (MEPs) are obtained at the MP2/6-311G(d,p) level. In order to obtain more accurate potential energy surface (PES) information and provide more credible energy data for kinetic calculation, the single-point energies along the MEPs are further computed at QCISD(T)/6-311+G(d,p) and G3MP2 levels. The rate constants for two channels, the methyl-H abstraction channel and hydroxyl-H abstraction channel, are calculated by canonical variational transition state theory (CVT) with small-curvature tunneling (SCT) contributions over the wide temperature region 220–1500?K. The theoretical overall rate constants are in good agreement with the available experimental data. For the title reaction, the methyl-H abstraction channel is dominant, while the hydroxyl-H abstraction channel is negligible over the whole temperature region.     

Theoretical investigations of the gas phase reaction of limonene (C10H16) with OH radical

The rate coefficients of hydroxyl radical (OH) reaction with limonene were computed using canonical variational transition state theory with small-curvature tunnelling between 275 and 400 K. The geometries and frequencies of all the stationary points are calculated using hybrid density functional theory methods M06-2X and MPWB1K with 6-31+G(d,p), 6-311++G(d,p), and 6-311+G(2df,2p) basis sets. Both addition and abstraction channels of the title reaction were explored. The rate coefficients obtained over the temperature range of 275–400 K were used to derive the Arrhenius expressions: k(T) = 4.06×10^?34 T^7.07 exp[4515/T] and k(T) = 7.37×10^?25 T^3.9 exp[3169/T] cm³ molecule^?1 s^?1 at M06-2X/6-311+G(2df,2p) and MPWB1K/6-311+G(2df,2p) levels of theory, respectively. Kinetic study indicated that addition reactions are major contributors to the total reaction in the studied temperature range. The atmospheric lifetime (τ) of limonene due to its reactions with various tropospheric oxidants was calculated and concluded that limonene is lost in the atmosphere within a few hours after it is released. The ozone production potential of limonene was computed to be (14–18) ppm, which indicated that degradation of limonene would lead to a significant amount of ozone production in the troposphere.     

Theoretical investigation of the transition states leading to HCI elimination in 2-chloropropene

This paper describes ab initio electronic structure calculations on the planar transition states of 2-chloropropene leading to HCI elimination in the ground electronic state to form either propyne or allene as the cofragment. The calculations provide optimized geometries of the transition states for these two reaction channels, together with vibrational frequencies, barrier heights, and reaction endothermicities. The calculated barrier heights for the two distinct four-centre HCI elimination transition states, one leading to HCI and propyne and the other leading to HCI and allene, are 72.5kcalmol^?1 (77.8kcalmol^?1 without zero-point correction) and 73.2kcalmol^?1 (78.7kcalmol^?1) at the MP2/6-311G(d, p) level, 71.Okcalmol^?1 (76.3kcalmol^?1) and 70.5kcalmol^?1 (76.0kcalmol^?1) at the QCISD(T)/6-311 +G(d, p)//MP2/6-311G(d, p) level, and 66.9kcalmol^?1 (71.7kcalmol^?1) and 67.3kcalmol^?1 (72.1kcalmol¹) at the G3//B3LYP level of theory. Calculated harmonic vibrational frequencies at the B3LYP/6-31G(d) level along with transition state barrier heights from the G3//B3LYP level of theory are used to obtain RRKM reaction rate constants for each transition state, which determine the branching ratio between the two HCI elimination channels. Even at internal energies well above both HCI elimination barriers, the HCI elimination leading to propyne is strongly favoured. The smaller rate constant for the HCI elimination leading to allene can be attributed to the strong hindrance of the methyl rotor in the corresponding transition state.     

甲基乙烯醚和OH反应机理的理论研究

利用量子化学从头计算的方法对甲基乙烯醚的两个异构体之间的转化,羟基与顺式-甲基乙烯醚和反式-甲基乙烯醚的加成反应,以及羟基提取甲基上的氢原子的反应机理进行了研究.研究结果表明:顺式-甲基乙烯醚比反式-甲基乙烯醚更加稳定,在QCISD/6-31G(d,P)//BHandHLYP/6.311 G(d,P)理论水平下,OH加到顺式-甲基乙烯醚1号住的碳原子上需要跨越的能垒比其它反应通道需要跨越的能垒少7.5～34 KJ/mol,因此是主要的反应通道,而OH加在反式.甲基乙烯醚2号位的碳原子上所需要跨越的能垒比其它反应路径所需要跨越的能垒少8.3～26.7 kJ/mol,因此是主要的反应路径.利用经典过渡态理论计算了总的速率常数     

Atmospheric oxidation chemistry of 1–methoxy 2–propyl acetate initiated by OH radicals: kinetics and mechanisms

Kinetics and mechanism of the gas-phase reaction of CH₃C(O)OCH(CH₃)CH₂OCH₃ (MPA) with OH radicals in the presence of O₂ and NO have been investigated theoretically by performing a high and reliable level of theory, viz., CCSD(T)/6-311?+?G(d,p)//BH&HLYP/6-311++G(d,p)?+?0.9335×ZPE. The calculations predict that the H-abstraction from the ?CH₂?O? position of MPA is the most facile channel, which leads to the formation of the corresponding alkoxy radicals CH₃C(O)OCH(CH₃)C(O ?)HOCH₃ under atmospheric conditions. This activated radicals CH₃C(O)OCH(CH₃)C(O ?)HOCH₃ will undergo further rearrangement, fragmentation and oxidative reactions and predominantly leads to the formation of various products (methyl formate HC(O)OCH₃ and acetic anhydride CH₃C(O)OC(O)CH₃). In the presence of water, acetic anhydride can convert into acetic acid CH₃C(O)OH via the hydrolysis reaction. The calculated total rate constants over the temperature range 263–372?K are used to derive a negative activation energy (E_a= ?5.88 kJ/mol) and an pre-exponential factor (A?=?1.78×10^?12 cm³ molecule^?1 s^?1). The obtained Arrhenius parameters presented here are in strong agreement with the experimental values. Moreover, the temperature dependence of the total rate constant over a temperature range of 263?1000?K can be described by k?=?5.60 × 10^?14×(T/298?K)^3.4×exp(1725.7?K/T) cm³ molecule^?1 s^?1.     

Quantum chemical study of the (Z)-2-penten-1-ol (HOCH2–CH = CHCH2CH3) + OH + O2 reactions

ABSTRACT

The mechanism and products of the reaction of (Z)-2-penten-1-ol [(Z)-PO21] with OH radical in the presence of O₂ have been elucidated by using high-level quantum chemical methods CCSD(T)/6-311+G(d,p)//BH&;HLYP/6-311++G(d,p). The calculations clearly indicate that addition channels contribute maximum to the total reaction and H-abstraction channels can be neglected at temperatures of 220–500 K. The rate constant for the reaction of OH radical with (Z)-PO21 at 298 K is computed to be 1.22 × 10^?10 cm³ molecule^?1 s^?1, which is in stronger agreement with the previously reported experimental values. The kinetic data obtained over the temperature range 220?500 K are used to derive an non-Arrhenius expression: k = 3.69 × 10^?13 × exp(1763.7/T) cm³ molecule^?1 s^?1. For the reaction of (Z)-PO21with OH radical in the presence of O₂, the major primary reaction products found in this study are propanal [CH₃CH₂C(O)H] and glycolaldehyde [HOCH₂C(O)H], whereas formaldehyde [HC(O)H], 2-hydroxybutanal [CH₃CH₂CH(OH)C(O)H] and the epoxide P18 are anticipated to be minor products. The calculated results are consistent with the recent experimental observations.     

Reaction of OH radical and ozone with methyl salicylate – a DFT study

A theoretical study on the reaction mechanism of methyl salicylate (MeSA), a green leaf volatile organic compound with OH radical and ozone, has been carried out using density functional theory methods using B3LYP, M06‐2X and MPW1K functionals with 6‐311++G(d,p) basis set. The atmospheric degradation pathways of MeSA with OH radical are studied under two different pathways, viz. H‐atom abstraction and electrophilic addition of OH radical. The hydrogen abstraction from –OH group is found to be the dominant reaction channel with small barrier height. Likewise, the electrophilic addition of OH radicals at the para position of MeSA is found to be favourable rather than the ortho and meta positions because of the small barrier height. However, the reaction of MeSA with respect to the addition of O₃ is initiated only through the cycloaddition to the C?C bond, resulting in primary ozonide. The Arrhenius plot for most of the addition reaction shows positive temperature dependence, while for the abstraction reaction, it exhibits negative temperature dependence over the temperature range of 278–350 K. The calculated theoretical rate constants are in good agreement with available experimental data. Overall, the addition of both OH radical and ozone possesses ability to degrade MeSA, but slower when compared with the Cl radical. Copyright © 2015 John Wiley & Sons, Ltd.     

Structural and thermochemical properties of methyl ethyl sulfide alcohols: HOCH2SCH2CH3, CH3SCH(OH)CH3, CH3SCH2CH2OH,and radicals corresponding to loss of H atom

Sulfide alkoxy radicals are important intermediates during the partial oxidation of alkyl sulfides in atmospheric chemistry and in combustion. The atmospheric reaction sequence to formation of the alkoxy radicals includes (1) initial reaction with OH to create a radical on a carbon site, (2) the carbon radical then associates with ³O₂ to form a peroxy radical, and (3) an NO radical reacts with the peroxy radical to form an alkoxy radical (RO?) plus NO₂. This study determines structural parameters, internal rotor potentials, bond dissociation energies, and thermochemical properties (Δ_fH°, S°, and C_p(T)) of 3 corresponding alcohols HOCH₂SCH₂CH₃, CH₃SCH(OH)CH₃, and CH₃SCH₂CH₂OH of methyl ethyl sulfides studied in order to characterize the thermochemistry of the respective alkoxy radicals. The lowest energy molecular structures were calculated using the B3LYP density functional level of theory with the 6‐311G(2d,d,p) basis set. Standard enthalpies of formation (Δ_fH°₂₉₈) for the radicals and their parent molecules were calculated using B3LYP/6‐31 + G(2d,p), CBS‐QB3, M062x/6‐311 + g(2d,p), and G3MP2B3 methods. Isodesmic reactions were used to determine ?_fH° values. Internal rotation potential energy diagrams and rotation barriers were investigated using the B3LYP/6‐31 + G(d,p) level theory. The contributions for S°₂₉₈ and C_p(T) were calculated using the rigid rotor harmonic oscillator approximation based on the structures and vibrational frequencies obtained by CBS‐QB3 calculations, with contributions from torsion frequencies replaced by internal rotor contributions. Group additivity and hydrogen bond increment values were developed for estimating properties of structurally similar and larger sulfur‐containing peroxide molecules and their radicals.     

Reaction mechanism and rate constants of the CH+CH4 reaction: a theoretical study

Ab initio and density functional calculations have been performed to elucidate the mechanism of CH radical insertion into methane. The results show that the reaction can be viewed to occur via two stages. On the first stage, the CH radical approaches methane without large structural changes to acquire proper positioning for the subsequent stage, where H-migration occurs from CH₄ to CH, along with a C–C bond formation. Where the first stage ends and the second begins, a tight transition state was located using the B3LYP/6-311G(d,p) and MP4(SDQ)/6-311++G(d,p) methods. Using a rigid rotor – harmonic oscillator approach within transition state theory, we show that at the MP5/6-311++G(d,p)//MP4(SDQ)/6-311++G(d,p) level the calculated rate constants are in a reasonably good agreement with experiment in a broad temperature range of 145–581 K. Even at low temperatures, the insertion reaction bottleneck is found about the location of the tight transition state, rather than at long separations between the CH and CH₄ reactants. In addition, high level CCSD(T)-F12/CBS calculations of the remainder of the C₂H₅ potential energy surface predict the CH+CH₄ reaction to proceed via the initial insertion step to the ethyl radical which then can emit a hydrogen atom to form highly exothermic C₂H₄+H products.     

A high level computational study of the CH4/CF4 dimer: how does it compare with the CH4/CH4 and CF4/CF4 dimers?

The interaction within the methane–methane (CH₄/CH₄), perfluoromethane–perfluoromethane (CF₄/CF₄) methane–perfluoromethane dimers (CH₄/CF₄) was calculated using the Hartree–Fock (HF) method, multiple orders of Møller–Plesset perturbation theory [MP2, MP3, MP4(DQ), MP4(SDQ), MP4(SDTQ)], and coupled cluster theory [CCSD, CCSD(T)], as well as the PW91, B97D, and M06-2X density functional theory (DFT) functionals. The basis sets of Dunning and coworkers (aug-cc-pVxZ, x?=?D, T, Q), Krishnan and coworkers [6-311++G(d,p), 6-311++G(2d,2p)], and Tsuzuki and coworkers [aug(df, pd)-6-311G(d,p)] were used. Basis set superposition error (BSSE) was corrected via the counterpoise method in all cases. Interaction energies obtained with the MP2 method do not fit with the experimental finding that the methane–perfluoromethane system phase separates at 94.5?K. It was not until the CCSD(T) method was considered that the interaction energy of the methane–perfluoromethane dimer (?0.69?kcal?mol^?1) was found to be intermediate between the methane (?0.51?kcal?mol^?1) and perfluoromethane (?0.78?kcal?mol^?1) dimers. This suggests that a perfluoromethane molecule interacts preferentially with another perfluoromethane (by about 0.09?kcal?mol^?1) than with a methane molecule. At temperatures much lower than the CH₄/CF₄ critical solution temperature of 94.5?K, this energy difference becomes significant and leads perfluoromethane molecules to associate with themselves, forming a phase separation. The DFT functionals yielded erratic results for the three dimers. Further development of DFT is needed in order to model dispersion interactions in hydrocarbon/perfluorocarbon systems.     

Theoretical calculations of the kinetics and mechanisms of the gas phase elimination of primary,secondary, and tertiary 2‐hydroxyalkylbenzenes

Theoretical study of the elimination kinetics of 2‐phenylethanol, 1‐phenyl‐2‐propanol, and 2‐methyl‐1‐phenyl‐2‐propanol in the gas‐phase has been carried out at the MP2/6‐31G(d,p), B3LYP/6‐31G(d,p), B3LYP/6‐31++G(d,p), MPW1PW91/6‐31G(d,p), MPW1PW91/6‐31++G(d,p), PBEPBE/6‐31G(d,p), and PBEPBE/6‐31++G(d,p) levels of theory. The three substrates undergo two parallel elimination reactions. The first elimination appears to proceed through a six‐membered cyclic transition state to give toluene and the corresponding aldehyde or ketone. The second parallel elimination takes place through a four‐membered cyclic transition state producing water and the corresponding unsaturated aromatic hydrocarbon. Results from MP2/6‐31G(d,p) and MPW1PW91/6‐31++G(d,p) methods were found to be in good agreement with the experimental kinetic and thermodynamic parameters in the formation of toluene and the corresponding carbonyl compound. However, the results for PBEPBE/6‐31G(d,p) were in better agreement with the experimental data for the second parallel reaction yielding water and the corresponding unsaturated aromatic hydrocarbon. The charge distribution differences in the TS related to the substitution by methyl groups in the substrates can account for the observed reaction rate coefficients. The synchronicity parameters imply semi‐polar transition states for these elimination reactions. Copyright © 2009 John Wiley & Sons, Ltd.     

The mechanism of alkaline hydrolysis of amides: a comparative computational and experimental study of the hydrolysis of N‐methylacetamide,N‐methylbenzamide,and acetanilide

Theoretical computations and experimental kinetic measurements were applied in studying the mechanistic pathways for the alkaline hydrolysis of three secondary amides: N‐methylbenzamide, N‐methylacetamide, and acetanilide. Electronic structure methods at the HF/6‐31+G(d,p) and B3LYP/6‐31+G(d,p) levels of theory are employed. The energies of the stationary points along the reaction coordinate were further refined via single point computations at the MP2/6‐31+G(d,p) and MP2/6‐311++G(2d,2p) levels of theory. The role of water in the reaction mechanisms is examined. The theoretical results show that in the cases of N‐methylbenzamide and N‐methylacetamide the process is catalyzed by an ancillary water molecule. The influence of water is further assessed by predicting its role as bulk solvent. The alkaline hydrolysis process in aqueous solution is characterized by two distinct free energy barriers: the formation of a tetrahedral adduct and its breaking to products. The results show that the rate‐determining stage of the process is associated with the second transition state. The entropy terms evaluated from theoretical computations referring to gas‐phase processes are significantly overestimated. The activation barriers for the alkaline hydrolysis of N‐methylbenzamide and acetanilide were experimentally determined. Quite satisfactory agreement between experimental values and computed activation enthalpies was obtained. Copyright © 2008 John Wiley & Sons, Ltd.     

Theoretical investigation of the oxidation pathways of the Cl-initiated reaction of 2-methyl-3-buten-2-ol

The mechanism and products of the reaction of 2-methyl-3-buten-2-ol (MBO232) with Cl atoms in the presence of O₂ have been elucidated by performing high-level quantum chemistry calculations. The geometries of the reactants, intermediates, transition states, and products are optimized at the MP2(full)/6-311G(d,?p) level, and their single-point energies are refined at the CCSD(T)/6-311?+?G(d,?p) level. The potential energy surface profiles have been constructed at the CCSD(T)/6-311?+?G(d,?p)//MP2(full)/6-311G(d,?p)?+?0.95?×?ZPE level of theory, and the possible channels involved in the reaction are also discussed. The calculations indicate that the reaction predominantly proceeds via the addition of Cl atoms to the double bond rather than the direct abstraction of the H atoms in MBO232. The nascent adducts (CH₃)₂C(OH)CHCH₂Cl (IM1) and (CH₃)₂C(OH)CHClCH₂ (IM2) do not undergo subsequent isomerization and dissociation reactions, but rather react with O₂. The theoretical results show that the major products are CH₂ClCHO and CH₃C(O)CH₃ for the reaction of MBO232?+?Cl in the presence of O₂, which is in good agreement with the experimental finding.     

UV‐induced transformations of matrix‐isolated 1,3,4‐thiadiazole‐2‐thiones

Monomers of 5‐mercapto‐1,3,4‐thiadiazole‐2‐thione (bismuthiol) were studied using an experimental matrix‐isolation technique as well as by carrying out theoretical quantum chemical calculations. The calculations, performed using the quadratic configuration interaction method with single and double excitations (QCISD)/6‐31++G(d,p)//DFT(B3LYP)/6‐311++G(2d,p), predict that the thione–thiol tautomer of bismuthiol should be significantly (by more than 19 kJ mol^?1) more stable than other tautomeric forms. Accordingly, only the signatures of the thione–thiol tautomer were observed in the FT‐IR spectrum of bismuthiol, recorded directly after deposition of an Ar matrix. UV (λ > 320 nm) irradiation induced the conversion of the thione–thiol tautomer into the dithiol form. Analogous investigations were carried out for two related compounds: 5‐methyl‐1,3,4‐thiadiazole‐2‐thione and 5‐methylthio‐1,3,4‐thiadiazole‐2‐thione. For these two species, only the thione tautomeric forms were observed after deposition of Ar matrices. These tautomers were predicted (by QCISD calculations) to be more stable (by at least 19 kJ mol^?1) than other tautomeric forms. Upon UV irradiation, the most stable thione forms of these compounds were transformed into the corresponding thiol tautomers. Direct observation of the thione → thiol phototautomeric processes provides a clear proof that intramolecular proton transfer reaction can occur in molecules, such as bismuthiol, in spite of the increased NH···S distance, in comparison to other phototautomerizing species studied so far. All the isomers of the studied compounds (substrates and products of the photoreactions) were identified by comparison of their IR spectra with the spectra calculated at the DFT(B3LYP)/6‐311++G(2d,p) level of theory for possible isomeric structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Hydrogen atom abstraction from Piperazine by hydroxyl radical: a theoretical investigation

Dual level of quantum mechanical calculations have been carried out for hydrogen abstraction from Piperazine [HN(CH₂CH₂)₂NH] initiated by OH radical. Geometry optimisation and frequency calculations of all species involved in the titled reaction have been performed at M06-2X/6-31+G(d,p) level of theory. For the accuracy in the thermochemistry and kinetics data, single-point energy calculations have been further carried out at coupled cluster CCSD(T) method along with 6-311G(d,p) basis set. An energy profile diagram for the reaction has been plotted along with pre-reactive and post-reactive complexes at entrance and exit channels. Intrinsic reaction coordinates (IRCs) calculations have been performed for identification of real transition states that connect it via reactant to product. Our result shows that the H-atom abstraction takes place from the C–H position of Piperazine. The rate constant is calculated using canonical transition state theory (CTST) is found to be 2.86 × 10^?10 cm³ molecule^?1 s^?1 which is in good agreement with the reported experimental rate constant (2.38 ± 0.28) × 10^?10 cm³ molecule^?1 s^?1 at 298 K. We have also reported rate constant for the temperature range 300–500 K. Using group-balance isodesmic reaction, the standard enthalpies of formation for Piperazine and product radicals generated by hydrogen abstraction are reported. The branching ratios for both reaction channel (i.e. H-abstraction from –CH₂ and –NH position of Piperazine) are found to be 93% and 7%, respectively. The calculated atmospheric life time of Piperazine is found to be 0.97 hour.     

Theoretical calculations for neighboring group participation in gas‐phase elimination kinetics of 2‐hydroxyphenethyl chloride and 2‐methoxyphenethyl chloride

Theoretical calculation of the kinetics and mechanisms of gas‐phase elimination of 2‐hydroxyphenethyl chloride and 2‐methoxyphenethyl chloride has been carried out at the MP2/6‐31G(d,p), B3LYP/6‐31G(d,p), B3LYP/6‐31 + G(d,p), B3PW91/6‐31G(d,p) and CCSD(T) levels of the theory. The two substrates undergo parallel elimination reactions. The first process of elimination appears to proceed through a three‐membered cyclic transition state by the anchimeric assistance of the aromatic ring to produce the corresponding styrene product and HCl. The second process of elimination occurs through a five‐membered cyclic transition state by participation of the oxygen of o‐OH or the o‐OCH₃ to yield in both cases benzohydrofuran. The B3PW91/6‐31G(d,p) method was found to be in good agreement with the experimental kinetic and thermodynamic parameters for both substrates in the two reaction channels. However, some differences in the performance of the different methods are observed. NBO analysis of the pyrolysis of both phenethyl chlorides implies a C? Cl bond polarization, in the sense of C^δ+…Cl^δ?, which is a rate‐determining step for both parallel reactions. Synchronicity parameters imply polar transition states of these elimination reactions. Copyright © 2009 John Wiley & Sons, Ltd.     

Quantum mechanical interpretation of the IR Spectrum of 2-deoxy-D-ribose in the oh group stretching vibration region

Within MP2/6-311++G(d,p)//DFT B3LYP/6-31 G(d,p) theory, taking into account the anharmonicity of the vibrations, we have calculated the vibrational spectra of all the conformers of the furanose, pyranose, and linear forms of the 2-deoxy-D-ribose molecule. Based on the calculation, we have interpreted the experimental IR spectrum of this molecule in the region of stretching vibrations of the OH groups. For the α and β anomers of the pyranose form of the molecule, we observe and explain the difference between the populations realized in the experiment and the calculated thermodynamic equilibrium values. We present the structures of the eight isomers of 2-deoxy-D-ribose determining its IR spectrum in a low-temperature inert matrix.     

Theoretical study and rate constant calculation for the O(3P) + C2H5CN reaction

The complicated microscopic reaction mechanisms of O(³P) with C₂H₅CN on the ground electronic state energy surface have been investigated at the G3(MP2) level of theory based on the geometric parameters optimized at the B3LYP/6-311 + G(d, p) level. Two kinds of H-abstraction and addition–elimination channels are considered, namely methylene-H abstraction, methyl-H abstraction, C-addition/elimination and N-addition/elimination. The kinetics of the title reaction have been studied using the TST and multichannel RRKM methodologies over a wide temperature range of 200–2000 K. The results show that the methylene-H abstraction process is predominant for the whole reaction. With an increase of temperature, H-abstraction from the methyl position channel should be taken into account. The C-addition/elimination process provides a few contributions to the title reaction compared with two kinds of H-abstraction channels over the whole temperature region and the N-addition/elimination channel can be negligible due to the high entrance barrier and unstable products.