硅钼杂多阴离子薄膜修饰电极线性扫描伏安法测定黑液中要溶性硅

本报导了以玻碳电极为基体的１∶１２硅钼杂多阴离子薄膜化学修，铈电极的制备及其电化学特性。并应用于导数伏安法测定。在４．０×１０＾－３ｍｏｌ／Ｌ９ＮＨ４）６Ｍｏ７Ｏ２４－６６．８×１０＾－２ｍｏｌ／ＬＮａ３Ｃｉｔ－０．４８ｍｏｌ／Ｌ ＮＨＯ３体系中，硅浓度在８．３×１０＾－７～１．７×１０＾－３ｍｏｌ／Ｌ。对可溶性硅（以ＳｉＯ２计）为２４５．０５ｍｇ／Ｌ的黑液，稀释１０倍后，取２．００ｍＬ平行测定     

流动注射示差动力学化学发光法测定微量硅

根据硅钼杂多酸氧化Ｌｕｍｉｎｏｌ产生化学发光的性质，以及硅钼杂多酸与磷钼杂多酸形成速度的差异，采用停流技术，在硅磷共存时，不经分离，实现了对和钢样中硅的选择性测定。该法检出限为２．０×１０＾－８ｇ／ｍＬ，线性范围１．０×１０＾－７－１．０×１０＾－５ｇ／ｍＬ，相对标准偏差为２．８％。     

用赤霉素作还原剂钼蓝分光光度法测定钢铁中的硅

用赤霉素作还原剂，对硅钼杂多酸的还原反应进行了系统研究。在０．２ｍｏｌ／ＬＨ２ＳＯ４介质中生成硅钼杂多酸之后，赤霉素能在相当宽的酸度范围内将其还原成十分稳定的硅钼蓝，其最大吸收波长为８１０ｎｍ，表观摩尔吸光系数为３．５１×１０４Ｌ·ｍｏｌ－１·ｃｍ－１。方法的检测限为２．９×１０－６ｇ／Ｌ。硅浓度在０～０．８０ｍｇ／Ｌ范围内符合Ｂｅｅｒ定律。该法已用于钢铁中硅的测定。     

全固态林可霉素选择电极的研制及应用

本以石墨棒为导电基体，以硅钨酸，林可霉素为电活性和的制成了全固态林可霉素离子选择电极。所制电极在１．０×１０＾－１－５．０×１０＾－５ｍｏｌ／Ｌ浓度范围内有线性响应，斜率为５８．３ｍＶ／ｐＣ，检测下限为２．５×１０＾－５ｍｏｌ／Ｌ。电极响应迅速，具有良好的稳定性，可用于林可霉素含量的快速测定。     

钼—桑色素的极谱波及其用于钨精矿中钼的测定

本提出了测定钼的新极谱体系，最佳底液条件为ｐＨ２．１的盐酸－２．３７×１０＾－６ｍｏｌ／Ｌ桑色素－０．１７２ｍｏｌ／Ｌ氯酸钠。极谱波峰电位为－０．４３Ｖ（ｖｓ．ＳＣＥ），钼（Ⅵ）浓度在１．０４×１０＾－９￣４．５９×１０＾－８ｍｏｌ／Ｌ范围内与波高有线性关系，检出限３．６７×１０＾－１０ｍｏｌ／Ｌ。方法简便，快速、准确，并已直接应用于钨精矿中微量钼的测定。     

大量锆存在下铪镧钼杂多酸—耐尔蓝体系测定给

本文研究了耐尔蓝（ＮＢ）－给镧钼杂多酸（ＨｆＬａＭｏ－聚乙烯醇（ＰＶＡ）体系测定铪的超高灵敏光度法。在ＰＶＡ存在下，铪，镧和钼酸铵形成杂多酸，继而与耐尔蓝形成离子缔合物。其适宜条件为〔ＨＣｌｏ４〕＝１．２ｍｏｌ／Ｌ，〔Ｌａ×３＋〕＝２．９×１０＾－７ｍｏｌ／Ｌ，〔ＭｏＯ４×２－〕＝１．１×１０＾－３ｍｏｌ／Ｌ，〔ＮＢ〕＝２．７×１０＾－６ｍｏｌ／Ｌ，ＰＶＡ０．０８％。离子缔合物的最大吸收波长在５９     

聚吡咯碳糊电极的研制及应用

研制了聚吡咯电极，探讨了该电极的性能和实用性，实验结果表明，该电极可用于伏安法快速测定Ｌ－抗坏血酸，在０．１ｍｏｌ／ＬＫＮＯ３底液中，线性范围为１．０×１０＾－１１～９．０×１０＾－９ｍｏｌ／Ｌ检测限为５．０×１０＾－１２ｍｏｌ／Ｌ，电极具有具有良好的重现性和高选择性，响应迅速，使用寿命３个月以上。     

硅钼杂多阴离子薄膜修饰电极线性扫描伏安法测定黑液中可溶性硅

本文报导了以玻碳电极为基体的１：１２硅钼杂多阴离子薄膜化学修铈电极的制备及其电化学特性。并应用于导数伏安法测定。在４．０×１０￣（－３）ｍ０ｌ／Ｌ（ＮＨ＿４）＿６ＭＯ＿７Ｏ＿（２４）－６．８×１０￣（－２）ｍｏｌ／ＬＮａ＿３Ｃｉｔ－０．４８ｍｏｌ／ＬＮＨＯ＿３体系中，硅浓度在８．３×１０￣（－７）～１．７×１０￣（－３）ｍｏｌ／Ｌ范围内与峰电流呈良好线性关系，检测限为８．０×１０￣（－７）ｍｏｌ／Ｌ。对可溶性硅（以ＳｉＯ＿２计）为２４５．０５ｍｇ／Ｌ的黑液，稀释１０倍后，取２．００ｍＬ平行测定９次，ＲＳＤ为０．５８％，加标回收率在９７．３％～１０４．４％间。     

聚氯乙烯膜奎宁选择电极的研制与应用

本报道了一种以奎宁溴汞酸盐为电活性物的ＰＶＣ膜奎宁选择电极，其线性响应范围为１．０×１０＾－２－１．０×１０＾－６ｍｏｌ／Ｌ；级差５８±１ｍＶ；检测限为８．２×１０＾－７ｍｏｌ／Ｌ。以此电极测定奎宁的含量，方法简单、快速、结果与药典法相符。     

电位型砷传感器的研究及分析应用

以ＣＴＭＡＢ修饰碳糊电极将砷钼杂多酸固定于碳糊电极表面,使其表面形成了杂多酸薄膜。该电极对４．００×１０＾－６～１．００×１０＾－３ｍｏｌ／Ｌ范围的砷钼杂多酸有能斯特响应,斜率为４７．５ｍＶ／ｐＡｓ（ｖ）,从而可间接测定砷。     

Side effects in measurements of selectivity coefficients of solid state ion selective electrodes

The influence of various factors such as solubility, the oxidation of the membrane, and the contamination of the solution, on the experimental values of the selectivity coefficients of solid state sulphide ion selective electrodes is discussed. A new method for the evaluation of very small selectivity coefficients, based on the addition of reagents forming complexes or insoluble salts with the main ion, is proposed. By means of this method, selectivity coefficients for silver, copper, cadmium and lead ion selective electrodes have been determined, which are in far better agreement with thermodynamic values than those described in the literature.     

用氧化还原聚合物修饰多孔电极

对３种类型Ｎａｆｉｏｎ／Ｏｓ（ｂｐｙ）３Ｃｌ２修饰电极的研究结果表明，单位表观电极面积上中继体载量比为：乙炔黑粉末微电极（Ａ）：Ｔｅｆｌｏｎ粘结的乙炔黑膜电极（Ｂ）：平面玻碳电极（Ｃ）＝１０＾３：１０＾２：１．Ａ比Ｂ及Ｃ更容易在真实表面上形成花天酒地而均匀的修饰层而有利于层内的电荷传递。在Ａ类电极基础上制行的葡萄糖酶电极在１０ｍｍｏｌ／Ｌ葡萄糖溶液中的响应电流密度高达４．６×１０＾－＾４Ａ／ｃｍ＾     

新型硫醇硫组合电极研制及性能测试

把玻璃参比电极、环状的银-硫化银指示电极、以及铂丝屏蔽电极组合形成新型硫醇硫组合电极,研究了在含有0.2 mol/L硫离子的醇-水-氨介质中,在表面活性剂存在下,以环状银电极为阳极,恒定微电流电沉积的方式制备硫化银敏感层的条件。由此法制得的新型硫醇硫组合电极在Ag 浓度为1.0×10-1~1.0×10-5mol/L范围内斜率为59.0±0.5 mV/pC,测量下限为2.2×10-6mol/L,与同类商品电极相比,响应速度快、记忆效应小、重复性好、电位稳定,易于批量生产,具有较强的适应性和应用价值。     

A Comparative Study between Screen-Printed and Solid-Contact Electrodes for the Stability-Indicating Determination of Bromazepam

Stability-indicating methods are awesome tools to ensure the safety and efficacy of active pharmaceutical ingredients (APIs). An accurate comparative study involving the use of potentiometric sensors for the determination of bromazepam (BRZ) in the presence of its main product of degradation and impurity was performed by the fabrication of two membrane electrodes. A screen-printed electrode (SPE) and a solid-contact glassy carbon electrode (SCE) were fabricated and their performance optimized. The fabricated sensors showed a linear electrochemical response in the concentration range 1.0 × 10⁻⁶ M to 1.0 × 10⁻² M. The electrodes exhibited Nernstian slopes of 59.70 mV/decade and 58.10 mV/decade for the BRZ-SPE and BRZ-SCE membrane electrodes, respectively. The electrochemical performance was greatly affected by the medium pH. They showed an almost ideal electrochemical performance between pH 3.0 and pH 6.0. The fabricated membranes were applied successfully for the quantification of BRZ in the presence of up to 90% of its degradation product. Moreover, a successful application of the fabricated electrodes was performed for the sensitive and selective quantification of BRZ in its tablet form without any pretreatment procedure.     

内场致发射电极的电化学行为

在N-Si和P-Si半导体上用化学沉积法制备了内场致发射电极并研究了它们的电化学行为。从分解电势Ⅰ～Ⅴ曲线可知,这种电极可在低于1.23V下分解水;对Fe~(3+)/Fe~(2+)体系的循环伏安图,其峰电流为铂电极的8倍多。     

Electroanalytical Determination of Vancomycin at a Graphene‐modified Electrode: Comparison of Electrochemical Property between Graphene,Carbon Nanotube,and Carbon Black

Carbon nanotube, graphene and carbon black, as electrode modifiers, were compared and evaluated for the electrochemical determination of vancomycin. Among them, the best results were obtained at the graphene‐modified electrode. Additions of vancomycin using square wave voltammetry at the graphene‐modified electrode showed a linear range from 0.70 μM to 50 μM and a detection limit of 0.20 μM was obtained. To control the correct dose of vancomycin and reduce its side effects, its accurate determination in blood plasma is very important. Therefore, the method was applied for the vancomycin determination in spiked human plasma samples and satisfactory recoveries were observed. The developed method exhibited fast analysis, high sensitivity, good repeatability and freedom from other interfering species.     

Carbon-Filled Polymer Paste Reference Electrodes

Abstract

Inexpensive, disposable, carbon-filled polymer paste reference electrodes are reported. These electrodes are designed for use in conjuction with carbon-filled polymer paste ion-selective probes reported earlier. Attachment of integrated electronics is easily achieved.     

Poly(vinyl chloride) membrane electrode for the determination of verapamil

A verapamil-PVC membrane ion-selective electrode based on the verapamil-reineckate ion pair was prepared with dibutyl phthalate as a plasticizer. The electrode exhibited a linear response with a Nernstian slope (52.8 mV decade^?1 at 20° C) for verapamil concentrations of 10^?5?10^?2M over the pH range 3–7. The electrode also exhibited very good selectivity for verapamil with respect to various inorganic and organic cations. Gran II linear titration and potentiometric titration were used to determine verapamil in pure solution, with an average recovery of 99.3% and a relative standard deviation of 0.4%.     

Development of new potentiometric sensors for the determination of proguanil hydrochloride in serum and urine

Potentiometric electrodes were developed for the rapid determination of proguanil hydrochloride in pure samples, pharmaceutical preparations and spiked serum and urine samples using PVC membrane,screen printed(SPE), coated wired(CWE), carbon paste(CPE) and modified carbon paste(MCPE)electrodes based on the ion-exchanger of proguanil with phosphotungestic acid(Pr-PT) as a chemical modifier. The prepared electrodes showed Nernestian slopes of 59.7, 58.1, 58.5, 58.5 and 57.0 for the PVC,SPE, CWE, CPE and MCPE for the proguanil ions in a wide concentration range of 1.0 * 10~(-5)–1.0 * 10~(-2)mol L~(-1) at 25°C with detection limits of 7.94 * 10~(-6), 1.0 * 10~(-5), 1.0 * 10~(-6), 7.07 * 10~(-6) and 2.5 * 10~(-6) mol L~(-1), respectively. The prepared electrodes exhibited high proguanil selectivity in relation to several inorganic ions and sugars and they could be successfully utilized for its determination in pure solutions, pharmaceutical preparations and serum and urine samples using the direct potentiometry and standard addition methods with very good recovery values.