Non-uniform slot suction/injection into mixed convection boundary layer flow over vertical cone

The aim of this work is to study the effect of non-uniform single and double slot suction/injection into a steady mixed convection boundary layer flow over a vertical cone, while the axis of the cone is inline with the flow. The governing boundary layer equations are transformed into a non-dimensional form by a group of non-similar trans- formations. The resulting coupled non-linear partial differential equations are solved nu- merically by employing the quasi-linearization technique and an implicit finite-difference scheme. Numerical computations are performed for different values of the dimensionless parameters to display the velocity and temperature profiles graphically. Also, numerical results are presented for the skin friction and heat transfer coefficients. Results indicate that the skin friction and heat transfer coefficients increase with non-uniform slot suction, but the effect of non-uniform slot injection is just opposite.     

Unsteady mixed convection flow over stretching sheet in presence of chemical reaction and heat generation or absorption with non-uniform slot suction or injection

The article examines the unsteady mixed convection flow over a vertical stretching sheet in the presence of chemical reaction and heat generation or absorption with non-uniform mass transfer. The unsteadiness is caused by the time dependent free stream velocity varying arbitrarily with time. Non-similar solutions are obtained numerically by solving the coupled nonlinear partial differential equations using the quasilinearization technique in combination with an implicit finite difference scheme. To reveal the tendency of the solutions, typical results for the local skin friction coefficient and the local Nusselt and Sherwood numbers are presented for different values of parameters. The effects of various parameters on the velocity, temperature, and concentration distributions are discussed here. The present numerical results are compared with the previously published work, and the results are found to be in excellent agreement.     

Unsteady mixed convection flow from a rotating vertical cone with a magnetic field

An analysis is developed to study the unsteady mixed convection flow over a vertical cone rotating in an ambient fluid with a time-dependent angular velocity in the presence of a magnetic field. The coupled nonlinear partial differential equations governing the flow have been solved numerically using an implicit finite-difference scheme. The local skin friction coefficients in the tangential and azimuthal directions and the local Nusselt number increase with the time when the angular velocity of the cone increases, but the reverse trend is observed for decreasing angular velocity. However, these are not mirror reflection of each other. The magnetic field reduces the skin friction coefficient in the tangential direction and also the Nusselt number, but it increases the skin friction coefficient in the azimuthal direction. The skin friction coefficients and the Nusselt number increase with the buoyancy force.     

Unsteady double diffusive mixed convection flow over a vertically stretching sheet in the presence of suction/injection

An unsteady double diffusive mixed convection boundary layer flow over a vertically stretching sheet in the presence of suction/injection is investigated in this paper. The governing partial differential equations are reduced by applying suitable transformations to a set of nonlinear ordinary differential equations, which is solved by the Keller box method. The influence of various flow parameters on the velocity, temperature, and species concentration profiles of the fluid is studied. The effect of some problem parameters on the skin friction coefficient in the presence of suction/injection is considered.     

Modeling natural convection boundary layer flow of micropolar nanofluid over vertical permeable cone with variable wall temperature

This paper discusses the natural convection boundary layer flow of a micropolar nanofluid over a vertical permeable cone with variable wall temperatures. Non-similar solutions are obtained. The nonlinearly coupled differential equations under the boundary layer approximations governing the flow are solved numerically using an efficient, iterative, tri-diagonal, implicit finite difference method. Different experimental correlations for both nanofluid effective viscosity and nanofluid thermal conductivity are considered.It is found that as the vortex-viscosity parameter increases, both the velocity profiles and the local Nusselt number decrease. Also, among all the nanoparticles considered in this investigation, Cu gives a good convection.     

Unsteady compressible boundary layer flow over a circular cone near a plane of symmetry

An analysis has been performed to study the unsteady laminar compressible boundary layer governing the hypersonic flow over a circular cone at an angle of attack near a plane of symmetry with either inflow or outflow in the presence of suction. The flow is assumed to be steady at time t=0 and at t>0 it becomes unsteady due to the time-dependent free stream velocity which varies arbitrarily with time. The nonlinear coupled parabolic partial differential equations under boundary layer approximations have been solved by using an implicit finite-difference method. It is found that suction plays an important role in stabilising the fluid motion and in obtaining unique solution of the problem. The effect of the cross flow parameter is found to be more pronounced on the cross flow surface shear stress than on the streamwise surface shear stress and surface heat transfer. Beyond a certain value of the cross flow parameter overshoot in the cross flow velocity occurs and the magnitude of this overshoot increases with the cross flow parameter. The time variation of the streamwise surface shear stress is more significant than that of the cross flow surface shear stress and surface heat transfer. The suction and the total enthalpy at the wall exert strong influence on the streamwise and cross flow surface shear stresses and the surface heat transfer except that the effect of suction on the cross flow surface shear stress is small.     

Mixed convection flow over a vertical plate with localized heating (cooling), magnetic field and suction (injection)

An analysis is carried out to study the effects of localized heating (cooling), suction (injection), buoyancy forces and magnetic field for the mixed convection flow on a heated vertical plate. The localized heating or cooling introduces a finite discontinuity in the mathematical formulation of the problem and increases its complexity. In order to overcome this difficulty, a non-uniform distribution of wall temperature is taken at finite sections of the plate. The nonlinear coupled parabolic partial differential equations governing the flow have been solved by using an implicit finite-difference scheme. The effect of the localized heating or cooling is found to be very significant on the heat transfer, but its effect on the skin friction is comparatively small. The buoyancy, magnetic and suction parameters increase the skin friction and heat transfer. The positive buoyancy force (beyond a certain value) causes an overshoot in the velocity profiles.A mass transfer constant - B magnetic field - C_fx skin friction coefficient in the x-direction - C_p specific heat at constant pressure, kJ.kg^–1.K - C_v specific heat at constant volume, kJ.kg^–1.K^–1 - E electric field - g acceleration due to gravity, 9.81 m.s^–2 - Gr Grashof number - h heat transfer coefficient, W.m².K^–1 - Ha Hartmann number - k thermal conductivity, W.m^–1.K - L characteristic length, m - M magnetic parameter - Nu_x local Nusselt number - p pressure, Pa, N.m^–2 - Pr Prandtl number - q heat flux, W.m^–2 - Re Reynolds number - Re_m magnetic Reynolds number - T temperature, K - T_o constant plate temperature, K - u,v velocity components, m.s^–1 - V characteristic velocity, m.s^–1 - x,y Cartesian coordinates - thermal diffusivity, m².s^–1 - coefficient of thermal expansion, K^–1 - , transformed similarity variables - dynamic viscosity, kg.m^–1.s^–1 - ₀ magnetic permeability - kinematic viscosity, m².s^–1 - density, kg.m^–3 - buoyancy parameter - electrical conductivity - stream function, m².s^–1 - dimensionless constant - dimensionless temperature, K - w, conditions at the wall and at infinity     

Effect of Hall current on MHD mixed convection boundary layer flow over a stretched vertical flat plate

In this paper, the steady magnetohydrodynamic (MHD) mixed convection boundary layer flow of an incompressible, viscous and electrically conducting fluid over a stretching vertical flat plate is theoretically investigated with Hall effects taken into account. The governing equations are solved numerically using an implicit finite-difference scheme known as the Keller-box method. The effects of the magnetic parameter, the Hall parameter and the buoyancy parameter on the velocity profiles, the cross flow velocity profiles and the temperature profiles are presented graphically and discussed. Investigated results indicate that the Hall effect on the temperature is small, and the magnetic field and Hall currents produce opposite effects on the shear stress and the heat transfer at the stretching surface.     

Effects of the chemical reaction and heat generation or absorption on a mixed convection boundary layer flow over a vertical stretching sheet with nonuniform slot mass transfer

An analysis is performed to study the effects of the chemical reaction and heat generation or absorption on a steady mixed convection boundary layer flow over a vertical stretching sheet with nonuniform slot mass transfer. The governing boundary layer equations with boundary conditions are transformed into the dimensionless form by a group of nonsimilar transformations. Nonsimilar solutions are obtained numerically by solving the coupled nonlinear partial differential equations using the quasi-linearization technique combined with an implicit finite difference scheme. The numerical computations are carried out for different values of dimensionless parameters to display the distributions of the velocity, temperature, concentration, local skin friction coefficient, local Nusselt number, and local Sherwood number. The results obtained indicate that the local Nusselt and Sherwood numbers increase with nonuniform slot suction, but nonuniform slot injection produces the opposite effect. The local Nusselt number decreases with heat generation and increases with heat absorption.     

Analysis of a laminar boundary layer flow over a flat plate with injection or suction

An analysis is performed to study a laminar boundary layer flow over a porous flat plate with injection or suction imposed at the wall. The basic equations of this problem are reduced to a system of nonlinear ordinary differential equations by means of appropriate transformations. These equations are solved analytically by the optimal homotopy asymptotic method (OHAM), and the solutions are compared with the numerical solution (NS). The effect of uniform suction/injection on the heat transfer and velocity profile is discussed. A constant surface temperature in thermal boundary conditions is used for the horizontal flat plate.     

Unsteady natural convection from a vertical flat plate with suction

Summary Exact solutions of the Navier-Stokes equations and the energy equation neglecting dissipation terms for natural convection from a porous vertical flat plate have been obtained in the following two cases: (i) when the plate is suddenly raised to a uniform higher temperature, (ii) when the plate suddenly begins to generate a uniform heat flux at its surface. Expressions for the skin friction and coefficient of heat transfer at the plate have been obtained. Skin friction decreases with suction in both cases.     

Laminar mixed convection from a continuously moving vertical surface with suction or injection

The boundary layer flow over a uniformly moving vertical surface with suction or injection is studied when the buoyancy forces assist or oppose the flow. Similarity solutions are obtained for the boundary layer equations subject to power law temperature and velocity boundary conditions. The effect is of various governing parameters, such as Prandtl number Pr, temperature exponent n, injection parameter d, and the mixed convection parameter λ=Gr/Re², which determine the velocity and temperature distributions and the heat transfer coefficient, are studied. The heat transfer coefficient increases as λ assisting the flow for all d at Pr=0.72 however, for n=−1 it decreases sharply with λ. On the other hand, increasing λ has no effect on heat transfer coefficient for Pr=10 at n=0, and 1 for almost all values of d studied. However, for n=−1 it has similar effect as for Pr=0.72. It is also found that Nusselt number increases as n increases for fixed λ and d. Received on 26 March 1997     

Effects of blowing or suction on the laminar boundary layer flow over a rotating cone

The effects of suction or blowing at the surface of a rotating cone in a quiet fluid on the skin friction and heat transfer are described. The equations which govern the fluid motion and thermal energy transfer are transformed by the boundary layer approximations and the resulting equations are solved under the condition that the suction or blowing velocity varies as x ⁿ (x: distance measured from the apex of the cone, n: arbitrary constant). The solutions are obtained as a perturbation from the basic laminar flow of an incompressible viscous fluid over the impermeable rotating cone. Detailed numerical calculations are performed for the case of an isothermal rotating cone with uniform blowing or suction, i.e. n=0, the Prandtl number being 0.72. Results are given for the shear stress, heat transfer and velocity and temperature fields. It is shown from the analysis that suction sharply increases the circumferential shear stress and the heat transfer at the surface.Nomenclature c proportional constant - C _fx dimensionless skin friction factor, _x /(V ²) - C _fx0 dimensionless skin friction factor for an impermeable cone - C _fy dimensionless circumferential skin friction factor, _y /(V ²) - C _fy0 dimensionless circumferential skin friction factor for an impermeable cone - c _p specific heat at constant pressure - f _k function of - g _k function of - h heat transfer coefficient, q/(T _w–T ) - k thermal conductivity of fluid - n arbitrary constant - Nu _x local Nusselt number, hx/k - Nu _x0 local Nusselt number for an impermeable cone - Pr Prandtl number - q heat transfer rate - r radius of a circular cross section of the cone, x sin - R _x Reynolds number, Vx/ - T temperature - T _w surface temperature of the cone - T temperature of the surrounding fluid - u fluid velocity in x-direction - v fluid velocity in y-direction - V circumferential velocity at the cone surface, r - w fluid velocity in z-direction - x coordinate along meridional section - y coordinate along a circular cross section - z coordinate perpendicular to both x and y - perturbation parameter, cx ⁿ /(x sin )^1/2 - dimensionless z-coordinate, z( sin /)^1/2 - _k function of - kinematic viscosity - density of fluid - _x skin friction in x-direction - _y circumferential skin friction - stream function - angular speed of the cone     

Effects of surface mass transfer on unsteady mixed convection flow over a vertical cone with chemical reaction

The unsteady mixed convection boundary layer flow over a vertical cone is considered to investigate the combined effects of the buoyancy force, thermal and mass diffusion in the presence of the first order chemical reaction and surface mass transfer. The unsteadiness is caused by the time dependent free stream velocity varying arbitrarily with time. The governing boundary layer equations are transformed into a non-dimensional form by a group of non-similar transformations. The resulting system of coupled non-linear partial differential equations is solved numerically by the combination of quasi-linearization technique and an implicit finite difference scheme. Numerical computations are performed for different values of the parameters to display the velocity, temperature and concentration profiles graphically. Both accelerating and decelerating free stream velocities are considered. Numerical results are presented for the velocity, temperature and concentration profiles as well as for the skin-friction coefficient, local Nusselt number and local Sherwood number. The obtained results are compared with previously reported ones and are found to be in excellent agreement.     

Unsteady MHD mixed convection flow over an impulsively stretched permeable vertical surface in a quiescent fluid

The unsteady mixed convection flow of an incompressible laminar electrically conducting fluid over an impulsively stretched permeable vertical surface in an unbounded quiescent fluid in the presence of a transverse magnetic field has been investigated. At the same time, the surface temperature is suddenly increased from the surrounding fluid temperature or a constant heat flux is suddenly imposed on the surface. The problem is formulated in such a way that for small time it is governed by Rayleigh type of equation and for large time by Crane type of equation. The non-linear coupled parabolic partial differential equations governing the unsteady mixed convection flow under boundary layer approximations have been solved analytically by using the homotopy analysis method as well as numerically by an implicit finite difference scheme. The local skin friction coefficient and the local Nusselt number are found to decrease rapidly with time in a small time interval and they tend to steady-state values for t*≥5. They also increase with the buoyancy force and suction, but decrease with injection rate. The local skin friction coefficient increases with the magnetic field, but the local Nusselt number decreases. There is a smooth transition from the unsteady state to the steady state.     

Unsteady mixed convection flow in stagnation region adjacent to a vertical surface

The unsteady two-dimensional laminar mixed convection flow in the stagnation region of a vertical surface has been studied where the buoyancy forces are due to both the temperature and concentration gradients. The unsteadiness in the flow and temperature fields is caused by the time-dependent free stream velocity. Both arbitrary wall temperature and concentration, and arbitrary surface heat and mass flux variations have been considered. The Navier-Stokes equations, the energy equation and the concentration equation, which are coupled nonlinear partial differential equations with three independent variables, have been reduced to a set of nonlinear ordinary differential equations. The analysis has also been done using boundary layer approximations and the difference between the solutions has been discussed. The governing ordinary differential equations for buoyancy assisting and buoyancy opposing regions have been solved numerically using a shooting method. The skin friction, heat transfer and mass transfer coefficients increase with the buoyancy parameter. However, the skin friction coefficient increases with the parameter , which represents the unsteadiness in the free stream velocity, but the heat and mass transfer coefficients decrease. In the case of buoyancy opposed flow, the solution does not exist beyond a certain critical value of the buoyancy parameter. Also, for a certain range of the buoyancy parameter dual solutions exist.Die zweidimensionale laminare Mischkonvektionsströmung im Staubereich einer vertikalen Oberfläche, in der Temperatur- und Konzentrationsgradienten die Auftriebskräfte erzeugen, wurde untersucht. Die Unstetigkeiten im Strömungs- und im Temperaturfeld liegen in der zeitabhängigen freien Strömungsge-schwindigkeit begründet. Die willkürliche Wandtempereratur und Konzentration sowie die willkürliche Oberflächenwärme- und die Massenstromschwankungen wurden in Betracht gezogen. Die Navier-Stokes-Gleichung, die Energiegleichung und die Konzentrationsgleichung, die drei nicht lineare, partielle Differentialgleichungen mit drei unabhängigen Variablen darstellen, sind auf eine Gruppe von nicht linearen, gewöhnlichen Differentialgleichungen reduziert worden. Die Berechnung ist auch mit der Grenzflächenap-proximation gemacht worden und die Unterschiede der Ergebnisse wurden diskutiert.Die bestehenden gewöhnlichen Differentialgleichungen für auftriebsuntertützte und auftriebshemmende Bereiche sind numerisch mit dem Shooting-Verfahren gelöst worden. Die Oberflächenreibung, die Wärme- und Stoffübertragungskoeffizienten steigen mit dem Auftriebsparameter. Der Oberflächenreibungskoeffizient steigt mit dem Parameter, der auch für die Unstetigkeit der freien Strömungsgeschwindigkeit verantwortlich ist. Die Wärme- und Stoffübertragungskoeffizienten sinken dann. Im Fall der auftriebsgehemmten Strömung, existiert nach einem bestimmten kritischen Wert des Auftriebsparameters keine Lösung mehr. Für eine bestimmte Reihe von Auftriebsparametern gibt es zwei Lösungen.     

Mixed convection boundary layer flow over a horizontal plate with thermal radiation

The effects of thermal radiation and thermal buoyancy on the steady, laminar boundary layer flow over a horizontal plate is investigated. The plate temperature is assumed to be inversely proportional to the square root of the distance from the leading edge. The set of similarity equations is solved numerically, and the solutions are given for some values of the radiation and buoyancy parameters for Prandtl number unity. It is found that dual solutions exist for negative values of the buoyancy parameter, up to certain critical values. Beyond these values, the solution does no longer exist. Moreover, it is found that there is no local heat transfer at the surface except in the singular point at the leading edge. The radiation parameter is found to increase the local Stanton number.     

Unsteady mixed convection on the stagnation-point flow adjacent to a vertical plate with a magnetic field

An analysis is performed to study the unsteady combined forced and free convection flow (mixed convection flow) of a viscous incompressible electrically conducting fluid in the vicinity of an axisymmetric stagnation point adjacent to a heated vertical surface. The unsteadiness in the flow and temperature fields is due to the free stream velocity, which varies arbitrarily with time. Both constant wall temperature and constant heat flux conditions are considered in this analysis. By using suitable transformations, the Navier–Stokes and energy equations with four independent variables (x, y, z, t) are reduced to a system of partial differential equations with two independent variables (, ). These transformations also uncouple the momentum and energy equations resulting in a primary axisymmetric flow, in an energy equation dependent on the primary flow and in a buoyancy-induced secondary flow dependent on both primary flow and energy. The resulting system of partial differential equations has been solved numerically by using both implicit finite-difference scheme and differential-difference method. An interesting result is that for a decelerating free stream velocity, flow reversal occurs in the primary flow after certain instant of time and the magnetic field delays or prevents the flow reversal. The surface heat transfer and the surface shear stress in the primary flow increase with the magnetic field, but the surface shear stress in the buoyancy-induced secondary flow decreases. Further the heat transfer increases with the Prandtl number, but the surface shear stress in the secondary flow decreases.