Synthesis of 4-Methyl-2-Isopropyl- 1,3 -Dioxolane by TiSiW12O40/ TiO2 as Catalyst

Acetals and ketals are a kind of the important compounds and used to protect carbonyl,middle material of the organic synthesis. What's more, they are a sort of the widely use flavor substance. 4-Methyl-2-isopropyl-1,3-dioxolane has fresh fruit odor and apple note. It is used to producing many sorts of essence. And the conventional method to synthesize 4-methyl-2-isopropyl-1,3-dioxolane makes use of sulfuric acid as catalyst in factories. But it causes many problems, such as the erosion of production equipment, difficulty after-treatment, low quality of the products, etc. HPA and its salts shows excellent catalytic activity to the esterification and have recently attracted much attention as catalysts for various industrial processes, because their acidic and redox properties can be controlled at atomic/molecular levels. Misono, Pope [1], and Wang [2]have reviewed the homogeneous catalysis and fine organic synthesis catalyzed by heteropoly compounds. However, there is no report on the synthesis of 4-methyl-2-isopropyl-1,3-dioxolane catalyzed by TiSiW12O40/TiO2. TiSiW12O40/TiO2 was prepared according to reference [3] and identified by means of IR and XRD. The reaction was carried out in a three-neck flask equipped with a stirrer, a reflux condenser, and a thermometer. A certain amounts of isobutyraldehyde,1,2-propanediol and the catalyst was heated to boiling and refluxed until no water flowed off. The purified product was analyzed by IR spectra and 1HNMR.In this paper, we report 4-methyl-2-isopropyl-1,3-dioxolane was synthesized from isobutyraldehyde and 1,2-propanediol in the presence of TiSiW12O40/TiO2. The factors influencing the yield of product and the optimum reaction conditions were discussed. The optimum conditions are molar ratio of isobutyraldehyde to 1,2-propanediol was 1:1.5, the quantity of catalyst was equal to 0.5% feed stock, and the reaction time was 1.0 h. TiSiW12O40/TiO2 was an excellent catalyst to synthesize 4-methyl-2-isopropyl-1,3-dioxolane and the yield can be up to 92.1%. IR spectra of 4-methyl-2-isopropyl- 1,3-dioxolane shows peaks at 1191,1100,1022,950 cm-1; 1HNMR (δH, ppm):4.65-4.67 (d, 1H, CH), 4.02-4.20 (m, 1H, CH), 3.81-3.92 (d, 1H, CH), 3.35-3.43 (t, 1H, CH),1.61～1.85 (m, 1H, CH), 1.14-1.29 (d, 3H, CH3), 0.96 (m, 6H, CH3); nD20=1.4135; b.p. 127-130 ℃.And we found that the catalyst can be utilized repeatedly, moreover, the catalytic activities of the catalyst are almost unchanged after it has been used five times. From the above results and discussion, we can see that the synthesis of 4-methyl-2-isopropyl-1,3-dioxolane catalyzed by TiSiW12O40/TiO2 instead of sulfuric acid has a great prospect of application.     

Dawson型磷钼钒杂多酸催化合成1,3-二噁戊烷的研究

考察了Dawson型磷钼钒杂多酸和各种结构反应底物对1，3-二噁戊烷合成催化活性的影响．研究表明：H6P2Mo17VO62的催化效果最好，反应条件温和，环氧化物的转化率接近100％，1，3-二噁戊烷的选择性在90％以上。     

微波增强H3PW12O40／TiO2光催化降解染料和水杨酸的研究

以孔雀石绿为模型分子, 考察了微波无极灯的形状、微波功率和溶液初始浓度对光催化降解效果的影响. 并且在最佳微波反应条件下, 考察了通过溶胶-凝胶再结合程序升温水热法制备的复合材料H3PW12O40/TiO2对刚果红、酸性黑、酸性品红和水杨酸的光催化降解情况. 结果表明, 微波无极灯具有更好地增强H3PW12O40/TiO2光催化降解有机污染物的作用.     

Hydrothermal Synthesis of H3PW12O40/TiO2 Nanometer Photocatalyst and Its Catalytic Performance for Methyl Orange

H3PW12O40/TiO2 nanometer photocatalyst was prepared by one step hydrothermal synthesis from H3PW12O40′nH2O and Ti(OBu)4,simultaneously realizing the load and modification of H3PW12O40.The catalyst was ...     

Catalytic Oxidation of Dimethyl Ether to Dimethoxymethane over Cs Modified HaPW12O40/SiO2 Catalysts

The attractive utilization route for one-step catalytic oxidation of dimethyl ether to dimethoxymethane was successfully carried out over the H3PW12O40（40%）/SiO2 catalyst, modified by Cs, K, Ni, and V. The Cs modification of H3PW12O40（40%）/SiO2 gave the most promising result of 20% dimethyl ether conversion and 34.8% dimethoxymethane selectivity. Dimethoxymethane could be synthe- sized via methoxy groups decomposed from dimethyl ether through the synergistic effect between the acid sites and the redox sites of Cs modified H3PW12O40（40%）/SiO2.     

Preparation and Photocatalytic Activity of Ce,H3PW12O40 co-doped TiO2 Hollow Fibers

A series of Ce, H3PW12O40 co-doped TiO2 hollow fibers photocatalysts have been prepared by sol-gel method using ammonium ceric nitrate, H3PW12O40 and tetrabutyltitanate as precursors and cotton fibers as template, followed by calcination at 500 ℃ in N2 atmosphere for 2 h. Scanning electron microscopy, X-ray diffraction, nitrogen adsorption-desorption mea- surements, and UV-Vis spectroscopy are employed to characterize the morphology, crystal structure, surface structure, and optical absorption properties of the samples. The photo- catalytic performance of the samples has been studied by photodegradation phenol in water under UV and visible light irradiation. The results show that the TiO2 fiber materials have hollow structures, and the co-doped TiO2 hollow fibers exhibit higher photocatalytic activities for the degradation of phenol than un-doped, single-doped TiO2 hollow fibers under UV and visible light. In addition, the recyclability of co-doped TiO2 fibers is also confirmed that the TiO2 fiber retains ca. 90% of its activity after being used four times. It is shown that the co-doped TiO2 fibers can be activated by visible light and may be potentially applied to the treatment of water contaminated by organic pollutants. The synergistic effect of Ce and H3PW12O40 co-doping plays an important role in improving the photocatalytic activity.     

三维有序大孔H3PW12O40-SiO2功能材料的制备、表征及催化性能研究

以杂多酸 H₃PW₁₂O₄₀ (PW₁₂)与正硅酸乙酯(TEOS)混合溶胶, 采用胶晶模板法结合煅烧去除模板工艺, 成功地制备了PW₁₂/SiO₂物质的量比在1/10～1/40之间的三维有序大孔(3DOM) PW₁₂-SiO₂催化剂. 经SEM, N₂吸附, XRD和FTIR等研究表明, PW₁₂含量较低的样品, 大孔结构三维规整性十分好. 在410 ℃氧化分解胶晶的条件下, PW₁₂基本保持一级Keggin结构. PW₁₂在样品中以分子簇或微晶存在, 其大小随含量增加而增大. PW₁₂高含量时, 其含氧键的FTIR振动与纯PW₁₂的基本一致, 但低含量时含氧键振动有一定偏移, 显示PW₁₂/SiO₂相互作用较显著. 样品酸性随杂多酸含量增加而增加, 但PW₁₂/SiO₂物质的量比超过1/30时酸性便减小, 呈火山型曲线变化规律. 对1-十二烯烷基化反应的催化活性随PW₁₂/SiO₂物质的量比的变化与酸性变化有相同的规律. 但所有样品的催化反应活性均远高于纯PW₁₂, 并且有良好的重复使用性能, 使用4次后仍保持新鲜催化剂活性的78%.     

Preparation and Catalytic Activity of SO42-/TiO-La2O3 in Synthesis of Butyl Butyrate

Butyl butyrate is a very important compound, which is transparent liquid and has the pear,apple flavor. Natural exist is in the fruit, such as apple, pear, banana, grape and strawberry, etc.Primarily used for to prepare the edible spice and is also widely used in industrial intermediate product, solvent and synthetic perfumery. Until now, there are many methods to synthesize it.Conventionally H2SO4 was reported, but it causes many problems, such as the erosion of equipment,easily causes the vice-reaction, difficulty for after-treatment, environment pollution etc. A new environmentally friendly catalyst, SO42-/TiO2-La2O3 was prepared. And catalytic activity of catalyst in esterification of n-butanoic acid and n-butyl alcohol with SO42-/TiO2-La2O3 as catalyst has been no report up to now. Therefore, studying on the synthetic catalyst has theoretical and practical significances. The catalytic activity of catalyst in esterification of n-butanoic acid and n-butyl alcohol was measured.In this paper, we fast reported the preparation of SO42-/riO2-La2O3 and discussed the factors influencing the synthesis catalyst. The catalyst rare earth solid superacid SO42-/TiO2-La2O3 was The precipitate was filtered and washed thoroughly with distilled water until chloride ions were free.furnace at 480 ℃ for 3 h, and finally stored in a desiccator until use.The factors influencing the synthesis were discussed and the best conditions were found out. The experiment indicated that this catalyst has the following advantage. The amount of catalyst was little and getting high yield, its product has a good quanlity and is favour of reducing erosion of equipment, avoiding environment pollution. The optimum conditions are: molar ratio of n-butanoic acid to n-butyl alcohol was 1:1.5, the quantity of catalyst was equal to 1.5% of feed stocks, the reaction temperature was 93-114 ℃, and the reaction time was 1.0 h. Rare earth solid superacid SO42-/TiO2-La2O3 is an excellent catalyst for synthetizing butyl butyrate and its yield can reach over 90.0%.A good catalyst should be able to be used repeatedly. The reusing of the catalyst was studied. We found that the catalytic activities of our catalyst are almost unchanged after it had been used five times. From the above results and discussion, we can see that the synthesis of n-butyl butyrate by SO42-/TiO2-La2O3 instead of H2SO4 has a great prospect of application. It has a good applied foreground.     

TiSiW12O40/TiO2催化合成己酸异戊酯

报道了以固载杂多酸盐TiSiW12O40/TiO4为多相催化剂，通过己酸和异戊醇反应合成了己酸异戊酯，探讨了TiSiW12O40/TiO4对酯化反应的催化活性，较系统地研究了醇酸摩尔比，催化剂用量，反应时间诸因素对收率的影响，实验表明：TiSiW12O40/TiO4是合成己酸异戊酯的良好催化剂，在n(醇）：n(酸）＝1．6：1，催化剂用量为反应物总质量的1．5％，反应时间45min，使用环己烷为带水剂的适宜条件下，己酸异戊酯的收率可达91．9％。     

Preparation and Photocatalytic Activity of Mesoporous TiO2 Photocatalyst Co‐doped with Fe and H3PW12O40

The mesoporous titanium dioxide (MTiO₂) photocatalysts co‐doped with Fe and H₃PW₁₂O₄₀ were synthesized by template method using tetrabutyl titanate (Ti(OC₄H₉)₄), Fe(NO₃)k₃9H₂Oand H₃PW₁₂O₄₀ as precursors and Pluronic P123 as template. The as‐prepared photocatalyst was characterized by N₂ adsorption‐desorption measurements, X‐ray diffraction (XRD), scanning electron microscopy (SEM) and UV‐vis adsorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl blue (MB) (50 mg/L) in an aqueous solution. The characterizations indicated that the photocatalysts possessed a homogeneous pore diameter of ca. 10 nm with high surface area of ca. 150 m²/g. The results of MB photodecomposition showed that co‐doped mesoporous TiO₂ exhibited higher photocatalytic activities than un‐doped, single‐doped mesoporous TiO₂ under UV and visible light irradiation. It was shown that the co‐doped MTiO₂ could be activated by visible light and could thus be used as an effective catalyst in photo‐oxidation reactions. The synergistic effect of Fe and H₃PW₁₂O₄₀ co‐doping played an important role in improving the photocatalytic activity.     

微波液相法一步合成H3PW12O40/Bi2WO6光催化剂及其脱氮性能

采用微波液相法一步合成了固载型H₃PW₁₂O₄₀/Bi₂WO₆光催化剂. 通过紫外-可见漫反射光谱(UV-Vis)、 场发射扫描电子显微镜(SEM)、 表面积及孔隙度(BET)测定、 氨气程序升温脱附(NH₃-TPD)、 吡啶吸附红外光谱(Py-FTIR)和X射线衍射(XRD)对所合成催化剂的结构和性质进行了考察, 并以吡啶浓度为15 mg/g的模拟油对光催化剂的脱氮效果进行评价. 结果表明, 与传统浸渍固载法相比, 微波液相一步法不仅能高效合成H₃PW₁₂O₄₀/Bi₂WO₆光催化剂, 且所合成的催化剂能被低能量的光激发. 固载H₃PW₁₂O₄₀不但能提高Bi₂WO₆纳米颗粒的表面酸量, 还能通过改变Bi₂WO₆前驱液的酸强度来调控催化剂形貌. 在H₃PW₁₂O₄₀固载量为15%(质量分数), 微波功率为800 W, 反应时间为90 min条件下得到的H₃PW₁₂O₄₀/Bi₂WO₆的光催化脱氮活性最高, 在催化剂与模拟油质量比为1/300, 500 W氙灯光照60 min的最佳光催化反应条件下, 模拟油脱氮率达到92.63%.     

固体超强酸催化剂SO2-4/TiO2-WO3的制备及其催化性能研究

制备了固体超强酸催化剂SO2-4/TiO2-WO3,并以丁酸丁酯的合成作为探针反应,系统考察了WO3的含量、硫酸浸渍浓度、焙烧温度等制备条件对SO2-4/TiO2-WO3催化活性的影响.实验表明:制备催化剂的适宜条件为m(H2WO4)=12.5%,硫酸浸渍浓度为1.0 mol·L-1,焙烧温度为580℃,活化时间3 h.利用优化条件下制备的催化剂SO2-4/TiO2-WO3催化合成缩醛(酮),在醛/酮与二元醇(乙二醇,1,2-丙二醇)的投料摩尔比为1:1.5,催化剂的用量占反应物总投料质量的0.5%,反应时间为l h条件下,2-甲基-2-乙氧羰甲基-1,3-二氧环戊烷的收率为78.7%,2,4-二甲基-2-乙氧羰甲基-1,3-二氧环戊烷的收率为83.0%,环己酮-乙二醇缩酮的收率为85.9%,环己酮-1,2-丙二醇缩酮的收率为84.6%,丁酮-乙二醇缩酮的收率为70.7%,丁酮-1,2-丙二醇缩酮的收率为88.3%,2-丙基-1,3-二氧环戊烷的收率为80.6%,4-甲基-2-丙基-1,3-二氧环戊烷的收率为79.6%,2-异丙基-1,3-二氧环戊烷的收率为64.2%,4-甲基-2-异丙基-1,3-二氧环戊烷的收率为83.3%,2-苯基-l,3-二氧环戊烷的收率为75.3%,4-甲基-2-苯基-1,3-二氧环戊烷的收率为95.1%.     

Synthesis and Structure Characterization of Novel Triazole Compounds Containing 1,3-Dioxolane

Five novel triazole compounds containing group 1,3-dioxolane were designed and synthesized by taking difenoconazole as the start compound and changing diphenyl ether for benzyl phenyl ether. Their structure swere confirmed by elemental analyses, ^1H NMR and IR spectra. The single crystal structure of 2-[-4-(2,4-dichlorophenylmethoxy] phenyl-2-(1,2,4-triazol-l-yl ) methane-I, 3-dioxolane was determined by means of X-ray diffraction. The preliminary bioassays showed that the synthesized compounds exhibited some activities of fungicides and plant growth regulators.     

环境友好催化剂TiSiW_(12)O_(40j)/TiO_2的制备及其催化性能研究

制备了新型固载杂多酸盐TiSiW_(12)O_(40)/TiO_2环境友好催化剂，并以丁酸 丁酯的合成作为探针反应，系统考察了原料H_4SiW_(12)O_(40)·xH_2O与TiO_2摩 尔比、焙烧温度、焙烧时间等制备条件对TiSiW_(12)O_(40)/TiO_2催化活性的影响 。实验表明：制备催化剂的适宜条件为原料H_4SiW_(12)O_(40)·xH_2O与TiO_2摩 尔比为0.47，焙烧温度为350 ℃，焙烧时间为3.0 h。利用该条件下制备的催化剂 TiSiW_(12)O_(40)/TiO_2合成了丁酸丁酯正丁醇与正丁醇的投料摩尔比n(醇):n(酸 ) = 1.3:1，催化剂的用量占反应物总投料质量的1.3%，反应时间为1 h，丁酸丁酯 的产率为97.2%。该催化剂TiSiW_(12)O_(40)/TiO_2用于制备其它丁酸酯类（如乙 酯、丙酯、戊酯、异戊酯）时同样取得了好的结果。     

Ce_2Mo_3O_(12)超微粒子的制备及催化性能

以硝酸铈和钼酸铵为原料 ,采用溶胶 -凝胶法和微波加热技术制备了Ce2 Mo3 O12 超微粒子催化剂 ,使用DTA -TG ,IR ,XRD以及BET比表面测试等表征手段 ,考察了制备条件对复合氧化物超微粒子形成 ,晶相和比表面积的影响 .同时 ,测试了该样品对甲苯选择性氧化制苯甲醛反应的催化性能 .结果表明 :制备Ce2 Mo3 O12 超微粒子的适宜条件为 :初始溶液pH =1.0 ,柠檬酸 / (铈 +钼 )摩尔比等于 0 .4 ,在此条件下制得的干凝胶 ,经微波加热处理后 ,粒子的比表面积为 35 .8m2 /g ,粒径约为 4 0nm .在由甲苯气相选择氧化制苯甲醛的反应中表现出较好的催化活性     

（E）－2－甲基－1，3－戊二烯的振动光谱及其稳定构象的研究

记录了（Ｅ）－２－二甲基－１，３－戊二烯的固、液、气态ＦＴＩＲ光谱（４００～４０００ｃｍ~（－１））和固、液态Ｒａｍａｎ光谱（５０～４０００ｃｍ~（－１）），观测了６８５及６５８ｃｍ~（－１）谱线的变温ＦＴＩＲ光谱（－７３～１０℃）．对所得谱图进行的指认分析发现，该化合物存在两种单键旋转构象异构体ｓ－ｔｒａｎｓ和ｓ－ｃｉｓ，由变温ＦＴＩＲ光谱峰强度随温度的变化得到这两种构象互变的ΔＨ~０和ΔＳ~０。     

固载杂多酸盐催化合成苯甲酸正戊酯

首次报道了以固载杂多酸盐TiSiW12 O4 0 /TiO2 为多相催化剂 ,对以苯甲酸和正戊醇为原料合成苯甲酸正戊酯的反应条件进行了研究 .实验表明 :TiSiW12 O4 0 /TiO2 是合成苯甲酸正戊酯的良好催化剂 .最佳反应条件为 :醇酸物质量比为 4∶1,催化剂用量为反应物料总量的 1.5 % ,反应时间为 2 .5h .上述条件下 ,苯甲酸正戊酯的产率可达 96 .7% .     

固载杂多酸催化合成2,4-二甲基-2-(4-甲基-3-戊烯基)-1,3-二氧五环

环缩酮类香料化合物[1 3]是在催化剂存在下由相应的酮和多元醇经缩合反应而制得。已报道的催化剂有质子酸[1]、固体酸[2,3]和某些金属盐类[4～7]等。本文以大孔阳离子交换树脂固载磷钨酸催化6 甲基 5 庚烯 2 酮与1,2 丙二醇的缩合反应,催化剂活性高,且可重复使用,后处理简便。1　实验1 1　仪器和试剂ＷＹＡ 1Ｓ阿贝折光仪;ＰＥ 2400ＣＨＮ元素分析仪;ＰＥ 783红外光谱仪。6 甲基 5 庚烯 2 酮、1,2 丙二醇、钨酸钠、磷酸氢二钠、盐酸等均为分析纯;大孔阳离子交换树脂(Ｄ001 ＣＣ型)。1 2　制备1 2 1　催化剂　以二水钨酸钠和十二水磷酸氢…     

固体超强酸催化剂SO_4~(2-)/TiO_2-WO_3的制备及其催化性能研究

制备了固体超强酸催化剂SO2 -4/TiO2 WO3 ,并以丁酸丁酯的合成作为探针反应 ,系统考察了WO3 的含量、硫酸浸渍浓度、焙烧温度等制备条件对SO2 -4/TiO2 WO3 催化活性的影响 .实验表明 :制备催化剂的适宜条件为m(H2 WO4) =12 5 % ,硫酸浸渍浓度为 1 0mol·L-1,焙烧温度为 5 80℃ ,活化时间 3h .利用优化条件下制备的催化剂SO2 -4/TiO2 WO3 催化合成缩醛 (酮 ) ,在醛 /酮与二元醇 (乙二醇 ,1,2 丙二醇 )的投料摩尔比为 1∶1 5 ,催化剂的用量占反应物总投料质量的 0 5 % ,反应时间为 1h条件下 ,2 甲基 2 乙氧羰甲基 1,3 二氧环戊烷的收率为 78 7% ,2 ,4 二甲基 2 乙氧羰甲基 1,3 二氧环戊烷的收率为 83 0 % ,环己酮 -乙二醇缩酮的收率为 85 9% ,环己酮 1,2 丙二醇缩酮的收率为 84 6% ,丁酮 -乙二醇缩酮的收率为70 7% ,丁酮 1,2 丙二醇缩酮的收率为 88 3 % ,2 丙基 1,3 二氧环戊烷的收率为 80 6% ,4 甲基 2 丙基 1,3 二氧环戊烷的收率为 79 6% ,2 异丙基 1,3 二氧环戊烷的收率为 64 2 % ,4 甲基 2 异丙基 1,3 二氧环戊烷的收率为 83 3 % ,2 苯基 1,3 二氧环戊烷的收率为 75 3 % ,4 甲基 2 苯基 1,3 二氧环戊烷的收率为 95 1% .     

2-甲基-6-(3-甲基-2-丁烯基)对苯二醌的合成

以邻甲基苯酚为原料,与1-氯-2-甲基-2-丁烯反应生成2-甲基-6-(3-甲基-2-丁烯基)苯酚,然后催化氧化得到目标产物2-甲基-6-(3-甲基-2-丁烯基)对苯二醌。该合成路线简单,易于操作,最终收率51%。