气相色谱法测定生物柴油中脂肪酸甲酯含量

生物柴油是利用动植物油脂等可再生资源通过酯交换技术制造的可以替代石化柴油的新型清洁安全燃料[1-3]它的主要成分是脂肪酸甲酯。由于不同油脂原料所生产的生物柴油的脂肪酸甲脂组成不同因而测定时所需的气相色谱条件与方法也不尽相同[4-6]。本文采用HP-innowax毛细管色谱柱,     

Characterization of fatty acid methyl esters by thermal analysis

The thermal stability of selected straight-chain (C₆-C₁₄) esters of fatty acids has been studied by TG-DTG and DTA analysis. In DTG, a peak is detected between 84° and 125° C followed by a main effect in the range 105°–215°C, whereas in DTA only an exothermic peak appears in the range of 126.5° to 187°C (onset temperatures). The temperatures of these effects have been related with ignition points, molecular weights and boiling points. The characteristics of melting and recrystallization of the above fatty acid methyl esters and those with carbon numbers between C₁₄ and C₂₄ have been established by DSC along the melting range between ?83° and 50°C. Polymorphism appears in caproic, heptanoic, palmitic and stearic acid methyl esters.     

Catalytic hydrogenation of fatty acid methyl esters

Catalytic hydrogenation of a mixture of fatty acid methyl esters, which are produced by re-esterification of vegetable (sunflower) oil and are contained in biodiesel fuel, was studied.     

Determination of potassium in fatty acid methyl esters applying an ion-selective potassium electrode

An easy and inexpensive method of potassium determination in fatty acid methyl esters (FAME) applying an ion-selective potassium electrode (ISE-K) is presented. FAME are considered alternative fuel for diesel engines. Simple apparatus and procedure were developed to avoid contact of ester samples with the sensitive ISE-K membrane, which can damage the ISE membrane surface in long time operation. Using different FAME samples with a wide range of known potassium content a calibration curve was constructed. Among all samples, ISE-K satisfactory predicted potassium content in FAME as identified by the AAS reference method.     

超高效液相色谱法测定生物柴油中的11种脂肪酸及脂肪酸甲酯

建立了采用超高效液相色谱(UPLC)-蒸发光散射检测器(ELSD)测定生物柴油中11种常见的脂肪酸及脂肪酸甲酯含量的方法。这11种常见的脂肪酸及脂肪酸甲酯为豆蔻酸、亚油酸、棕榈酸、油酸、亚麻酸甲酯、硬脂酸、亚油酸甲酯、棕榈酸甲酯、油酸甲酯、芥酸和硬脂酸甲酯。样品经提取后用甲醇溶解,采用Acquity UPLC BEH Phenyl C18柱(100 mm×2.1 mm,1.7 μm)分离,乙腈-水（体积比为3∶1)混合液为流动相进行等度洗脱,采用的ELSD条件为增益80,漂移管温度为45 ℃,载气压力为172 kPa,雾化器为冷却模式,并用外标法进行定量分析。结果表明,在一定的质量浓度范围内,峰面积的对数和质量浓度的对数线性关系良好。与其他检测生物柴油成分的方法相比,该方法简单,分离效果好,速度快,特别是此方法可以同时实现脂肪酸及脂肪酸甲酯的分离,并进行定量分析,能有效测定反应的进行程度,从而满足生物柴油工艺研究的需要。     

Quantification of primary fatty acid amides in commercial tallow and tallow fatty acid methyl esters by HPLC-APCI-MS

Primary fatty acid amides are a group of biologically highly active compounds which were already identified in nature. Here, these substances were determined in tallow and tallow fatty acid methyl esters for the first time. As tallow is growing in importance as an oleochemical feedstock for the soap manufacturing, the surfactant as well as the biodiesel industry, the amounts of primary fatty acid amides have to be considered. As these compounds are insoluble in tallow as well as in the corresponding product e.g. tallow fatty acid methyl esters, filter plugging can occur. For the quantification in these matrices a purification step and a LC-APCI-MS method were developed. Although quantification of these compounds can be performed by GC-MS, the presented approach omitted any derivatization and increased the sensitivity by two orders of magnitude. Internal standard calibration using heptadecanoic acid amide and validation of the method yielded a limit of detection of 18.5 fmol and recoveries for the tallow and fatty acid methyl ester matrices of 93% and 95%, respectively. A group of commercially available samples were investigated for their content of fatty acid amides resulting in an amount of up to 0.54%m/m (g per 100 g) in tallow and up to 0.16%m/m (g per 100 g) in fatty acid methyl esters.     

Mass spectrometry of 3-methoxy fatty acid methyl esters

Fatty acids with a hydroxyl moiety at the C-3 position are found widely in bacterial lipids, but only rarely in mammalian lipids. The mass spectra of the methyl ether derivative of these hydroxy acids exhibit an intense ion at m/e 75, rather than the rearrangement ion at m/e 74 more typical of fatty acid methyl esters. The mass spectrometric behavior of several 3-methoxy fatty acid methyl esters were studied, and the origin of the unique ion at m/e 75 was established using ¹⁸O and ²H labeled analogs and metastable ion transitions. this ion was shown to arise from the loss of ketene from the 3,4 cleavage ion at m/e 117.     

Unconventional air-stable interdigitated bilayer formed by 2,3-disubstituted fatty acid methyl esters

A single-chain fatty acid methyl ester, racemic anti-3-fluoro-2-hydroxyeicosanoic acid methyl ester (beta-FHE), forms an unconventional air-stable interdigitated bilayer at the air-water interface. The interdigitated bilayer transferred onto solid substrate by the Langmuir-Blodgett (LB) technique keeps air-stable without any substrate modification or protein inclusion. There are two visible plateaus in the surface pressure-molecular area (pi-A) isotherms of beta-FHE Langmuir film during continuous compression. According to Brewster angle microscopy (BAM), grazing incidence X-ray diffraction (GIXD), X-ray reflectivity (XR), fluorescence microscopy (FM), and atomic force microscopy (AFM) measurements, the first plateau is attributed to the coexistence of liquid expanded (LE) and liquid condensed (LC) phases in the monolayer, while the second plateau is interpreted as the transition from LC monolayer to interdigitated bilayer. The coupling between tilt and curvature associated with the packing mismatch between headgroup and chain gives rise to buckling and folding of the monolayer, leading to the transition of the LC monolayer to a bilayer structure. The diffusion-limited aggregation (DLA) model is applied to describe the formation of the fractal structures of the bilayer as observed in the second plateau. In addition, the transition between monolayer and bilayer is reversible. The present works are interesting for understanding biological processes, for example, the behavior of lung surfactants.     

Detection of phytoconstituents present in Azadirachta indica L. seeds extract by GC-MS analysis

Azadirachta indica L., commonly known as "Neem," belongs to the Meliaceae family. Traditionally, "Neem" has been used to cure diabetes, leprosy, and respiratory disorders. Azadirachta indica L. seed n-hexane extract was tested using GC-MS to determine the Phyto-components present. The analysis of A. indica L. seeds revealed the existence of Hexadecanoic acid, methyl ester (0.32%), n-Hexadecanoic acid (23.77%), 9-Octadecenoic acid (Z)- (0.07%), Methyl stearate (0.21%), Agaricic acid (0.06%), (E)-9-Octadecenoic acid ethyl ester (0.10%), 9-Octadecenoic acid (Z)-, methyl ester (0.48%), 6-Octadecenoic acid, (Z)- (64.25%), 9-Octadecenamide (0.06%), Oleic Acid (0.16%), Heneicosane (0.04%), Tetratetracontane (0.16%), Pentacosane (0.09%), Squalene (1.17%), Tetracontane (0.36%), γ-Tocopherol (0.16%), 2-[2-(6,6-Dimethylbicyclo[3.1.1]hept-2-en-2-yl) ethyl]-6,6-dimethylbicyclo[3.1.1]hept-2-ene (0.44%), γ-Sitosterol (0.25%), Kryptogenin dioxime (1.53%.), 9-Hexadecenoic acid, 9-octadecenyl ester, (Z,Z)- (1.34%.), and Lupa-13(18),20(30)-dien-3-yl acetate (0.17%). The findings of this study provide a foundation for employing A. indica L. seeds as a herbal option for a variety of ailments. GC-MS analysis was used to determine the quality of these substances. In the pharmaceutical industry, GC-MS reports will be useful for identifying a wide range of phyto-bioconstituents in various plant extracts, polyherbal extracts, and the standardization of specific plant materials.     

Treatment of acidic palm oil for fatty acid methyl esters production

Acidic crude palm oil (ACPO) produced from palm oil mills with an acid value of 18 mg g⁻¹ was considered to be a possible feedstock for biodiesel production. Due to its high acidity, conventional transesterification cannot be applied directly for biodiesel production. Methane sulphonic acid (MSA, CH₃SO₃H) is used to reduce the acidity prior to the alkaline transesterification reaction. The laboratory-scale experiments involved an MSA to ACPO dosage of 0.25–3.5 %, a molar ratio (methanol to ACPO) from 4: 1 to 20: 1, reaction temperature of 40–80°C, reaction time of 3–150 min, and stirrer speed of 100–500 min⁻¹. The optimum esterification reaction conditions were 1 % of catalyst to ACPO, with a molar ratio of methanol to ACPO of 8: 1, a stirring speed of 300 min⁻¹, for 30 min and at 60°C. Under these conditions, the FFA content was reduced from 18 mg g⁻¹ to less than 1 mg g⁻¹ and with a yield of 96 %. The biodiesel produced met the EN14214 standard specifications. MSA was recycled for three times without losing its activity. The biodiesel produced in a two-stage process has a low acid value (0.14 mg g⁻¹).     

Thermal decomposition and stability of fatty acid methyl esters in supercritical methanol

In recent years, non-catalytic supercritical processes for biodiesel production have been proposed as alternative environmentally friendly technologies. However, conditions of high temperature and pressure that occur while biodiesel is in supercritical fluid can cause fuel degradation, resulting in low yield. In this study, we performed the thermal decomposition of fatty acid methyl esters (FAMEs) in supercritical methanol at temperatures ranging from 325 °C to 420 °C and pressure of 23 MPa to investigate the degradation characteristics and thermal stability of biodiesel. The primary reactions we observed were isomerization, hydrogenation, and pyrolysis of FAMEs. The main pathway of degradation was deduced by analyzing the contents of degradation products. We found that if FAME has shorter chain length or is more saturated, it has higher thermal stability in supercritical methanol. All FAMEs remained stable at 325 °C or below. Based on these results, we recommend that transesterification reactions in supercritical methanol should be carried out below 325 °C (at 23 MPa) and 20 min, the temperature at which thermal decomposition of FAMEs begins to occur, to optimize high-yield biodiesel production.     

On-line hydrogenation of fatty acid methyl esters in capillary gas chromatography

An injection splitter in front of a glass capillary column was used for the hydrogenation of fatty acid methyl esters (FAME) mixtures. Hydrogenation followed by gas chromatographic analysis on capillary columns permitted detection and identification in complicated natural mixtures of branched fatty acids, showing minor structural differences, in quantities down to 10^?8g. The technique described, apart from its suitability for FAME analysis, shows promise for structure determination studies of other classes of compounds.     

Preparation of fatty acid methyl esters by direct transesterification of lipids with aluminium chloride-methanol

A new and simple procedure has been developed that allows the direct transesterification of lipids, using aluminium chloride as a catalyst and methanol as the esterifying alcohol. The concentration of the salt and reaction conditions have been investigated for the different lipid classes. Comparative studies, performed with boron trifluoride-methanol, indicate that the same values are obtained when using either reagent. In addition, the method has been adapted for transesterification in the presence of silica gel and other adsorbents, thus allowing the preparation of fatty acid methyl or ethyl esters directly from samples previously fractionated by thin-layer chromatography. This new reagent is very stable and easy to handle, the fatty acids being generated in the same tube without further purification steps.     

脂肪酶催化合成L-抗坏血酸脂肪酸酯和D-异抗坏血酸脂肪酸酯

用固定化脂肪酶Lipozyme 435作催化剂,分别用直接酯化法和酯交换法合成L-抗坏血酸脂肪酸酯和D-异抗坏血酸脂肪酸酯.产物结构经IR、1HNMR、13CNMR和MS表征.结果表明,对于同一目标化合物,相似条件下,直接酯化法的效果优于酯交换法,原料脂肪酸和脂肪酸甲酯均可回收循环使用.     

Liquid chromatographic separation of fatty acid methyl esters and phosphatidic acid dimethyl esters with silver nitrate-impregnated silica gel columns

Standard fatty acid methyl esters were separated by high-performance liquid chromatography with a silver nitrate-impregnated silica gel column with benzene as eluent and a differential refractometer as the detector. The separation, based on the number of double bonds, was greatly improved when the benzene was dried over calcium chloride for two days. Phosphatidic acid dimethyl esters derived from egg phosphatidylcholines were also resolved into three major fractions on the basis of the degree of unsaturation on a silver(I)-loaded resin column with diethyl ether as eluent and detected with a flame ionization monitor.