Reaction of the novel Ru<Subscript>3</Subscript>(CO)<Subscript>10</Subscript>[Ph<Subscript>2</Subscript>P(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>Si(OEt<Subscript>3</Subscript>)]<Subscript>2</Subscript> complex on SBA-15 and MCM-41 mesoporous silicas

The reaction of Ru₃(CO)₁₂ with 2(diphenylphosphino)ethyl-triethoxysilane (DPTS) in hydrocarbons, leads to the functionalized Ru₃(CO)_12−n [Ph₂P(CH₂)₂Si(OEt₃)] _n (n = 1,2) complexes. The complex with two phosphine substituents was chemically anchored on mesoporous silicas, SBA-15 and MCM-41, in order to obtain two hybrid materials characterized by a different localization of the metal centre on the surface of the porous supports. A detailed investigation of the cluster, before and after chemical anchoring on the mesoporous silicas, was pursued. Particular attention was also devoted to the study of the morphological, structural and textural properties of the metal-functionalised silicas (Ru/SBA-15 and Ru/MCM-41) by infrared spectroscopy (FT-IR), scanning electron microscopy, X-ray diffraction and N₂ physisorption analysis.     

Fabrication of Cu-Doped CeO<Subscript>2</Subscript> Catalysts with Different Dimension Pore Structures for CO Catalytic Oxidation

Transition metal oxides (TMOs) applied as catalysts whose catalytic activities are directly affected by their pores size and pores distributions. Herein, two-dimensional Cu-doped CeO₂ (2D@Cu–CeO₂) and three-dimensional Cu-doped CeO₂ (3D@Cu–CeO₂) were prepared by adopting the mesoporous silica SBA-15 and KIT-6 as templates, respectively. Nanometer Cu-doped CeO₂ (nano@Cu–CeO₂) was synthesized by the method of precipitation. All catalysts were evaluated for the catalytic oxidation of CO, and the 3D@Cu–CeO₂ catalyst exhibited the highest catalytic activity (complete conversion temperature T₁₀₀?=?50?°C), which can be ascribed to the three-dimensional porous channel structure, larger specific surface area and abundant active surface oxygen species. In addition, complete conversion of CO had remained the same after 3D@Cu–CeO₂ was observed for 12 h, indicating it has the best catalytic stability for CO.     

The application of pore size tunable SBA-15 molecular sieves in direct conversion of syngas to ethanol catalyzed by RhCl<Subscript>3</Subscript> and Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>

Four kinds of mesoporous molecular sieve SBA-15 (SBA-15-HCl, SBA-15-HPMo, SBA-15-HPW, and SBA-15-HSiW) were synthesized by different methods or materials. Loaded with RhCl₃ and Fe(NO₃)₃, the SBA-15-HPMo supported catalyst performed well in catalyzing direct conversion of syngas to ethanol.     

Catalytic efficiency of cesium and potassium salts of dodecatungstophosphoric acid supported on silica and comparison with H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>/SiO<Subscript>2</Subscript>

Pure tungstophosphoric acid, potassium tungstophosphate, and cesium tungstophosphate with varying extent of substitution of protons by Cs or K ions x (x = 1, 2, 2.5, and 3) have been prepared and are supported on silica by the wet impregnation method. The extent of loading was fixed at 20 wt %. For the sake of comparison, unloaded Cs _x and K _x (x = 1) salts of tungstophosphoric acid were prepared by the precipitation method. The supported catalysts were characterized by FT-IR, XRD, specific surface area measurements, and catalytic conversion of tert-butanol. The results revealed that the catalytic conversion of tert-butanol proceeds mainly via dehydration yielding isobutene. The Cs₁PW/SiO₂, HPW/SiO₂, and K₁PW/SiO₂ catalysts were more active than their unsupported samples. The previous solids showed greater catalytic activity and stability. Unexpectedly, substitution of one proton of tungstophosphoric acid by a cesium or potassium ion exerted no measurable effect on the catalytic activity of the treated solids, in spite of decreasing the Brønsted acidity of Cs₁PW/SiO₂ and K₁PW/SiO₂ indicating that the acidity of HPW/SiO₂ decrease may be due to the interaction between HPW and the SiO₂ surface. On the other hand, significant decrease in the catalytic activity took place upon increasing the cation content (x) to x = 2, 2.5, and 3.     

Investigation of macro-/mesoporous Re<Subscript>2</Subscript>O<Subscript>7</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts prepared by a particle-template method for butylene metathesis

Macro-/mesoporous Al₂O₃ supports were prepared by using monodisperse polystyrene (PS) microspheres as a template. The pore volume and BET surface area of the Al₂O₃ supports increased considerably with increasing amounts of the PS microspheres; further investigation showed that PS template only increased the volume of macro-pores but did not change the volume of meso-pores or micro-pores. Macro-/mesoporous Re₂O₇/Al₂O₃ metathesis catalysts were prepared through loading Re₂O₇ onto the as-prepared macro-/mesoporous Al₂O₃ supports, and their catalytic performance was tested in a fixed-bed tubular reactor using the metathesis of normal butylenes as a probe reaction. The results showed that the prepared macro-/mesoporous Re₂O₇/Al₂O₃ catalyst had high activity with consistent selectivity; propylene and pentene accounted for more than 90 wt% of the metathesis products, while the amount of ethylene plus hexane was less than 10 wt%, the majority of which was hexane. These Re₂O₇/Al₂O₃ catalysts had not only higher activity, but also longer working life span and higher tolerance to carbon residues than conventional Re₂O₇/Al₂O₃ catalysts.     

A Novel NiWS-TiO<Subscript>2</Subscript>(w) Catalyst Using NiWO<Subscript>4</Subscript> Nanoparticles as Precursor with Enhanced Hydrodesulfurization Activity

In this work, NiWO₄ nanoparticles were prepared by a novel simple method and loading on the mesoporous TiO₂ whiskers (TiO₂(w)) carrier as the precursor of NiWS. In addition, the NiWS-TiO₂(w) catalysts showing high hydrodesulfurization (HDS) activity is described. The structure and chemical composition of the as-prepared samples were characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, temperature-programmed reduction, NH₃-temperature programmed desorption and transmission electron microscopy, respectively. Results indicate that smaller crystallite size and better dispersion of active NiWO₄ particles could be achieved by using TiO₂(w) as the support to disperse NiWO₄ nanoparticles. TiO₂(w) can also decrease the reduction temperature of Ni–W metal oxide and promote a highly sulfidation degree of Ni and W active sites. The obtained NiWS-TiO₂(w) catalysts show much higher dibenzothiop HDS activity than the unsupported NiWS catalyst, and the sulphur content of desulfurated oil can reach 20 ppm at the mild condition of 260 °C and 2 Mpa.     

Effect of tungsten oxide loading on metathesis activity of ethene and 2-butene over WO<Subscript>3</Subscript>/SiO<Subscript>2</Subscript> catalysts

The metathesis of ethene and 2-butene to propene was studied over WO₃/SiO₂ catalysts with various WO₃ loadings (2, 4, 8, 12, 16, and 24 wt%). The 2-butene conversion and propene selectivity increased greatly with WO₃ loading increasing from 2 to 8 wt%, reached maximum at 8–12 wt% WO₃ loading, and then decreased when the WO₃ loading was higher than 12 wt%. From the above results and taking the economics into account, the optimal amount of WO₃ loading was ~8 wt%. The catalysts were characterized by physico-chemical and spectroscopic techniques to elucidate the effect of different tungsten oxide loadings on the metathesis reactivity of ethene and 2-butene. The characterization data indicated that three types of tungsten species (i.e., surface tetrahedral tungsten species, surface octahedral polytungstate species, and WO₃ crystallites) were present in the catalysts. It was found that WO₃ was not the active centers, and surface tetrahedral tungsten species might be more active than octahedral polytungstate species in metathesis reaction. The reduced form of tungsten species [W⁺⁴, W⁺⁵, and W^+(6−y) (0 < y < 1)] may be the suitable state of W species acting as metathesis active centers.     

Study of Fe-doped V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> catalyst for an enhanced NH<Subscript>3</Subscript>-SCR in diesel exhaust aftertreatment

Selective catalytic reduction (SCR) with ammonia has been considered as the most promising technology, as its effect deals with the NO_X. Novel Fe-doped V₂O₅/TiO₂ catalysts were prepared by sol–gel and impregnation methods. The effects of iron content and reaction temperature on the catalyst SCR reaction activity were explored by a test device, the results of which revealed that catalysts could exhibit the best catalytic activity when the iron mass ratio was 0.05%. It further proved that the VTiFe (0.05%) catalyst performed the best in denitration and its NO_X conversion reached 99.5% at 270 °C. The outcome of experimental procedures: Brunauer–Emmett–Teller surface area, X-ray powder diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, temperature-programmed reduction and adsorption (H₂-TPR, NH₃-TPD) techniques showed that the iron existed in the form of Fe³⁺ and Fe²⁺ and the superior catalytic performance was attributed to the highly dispersed active species, lots of surface acid sites and absorbed oxygen. The modified Fe-doped catalysts do not only have terrific SCR activities, but also a rather broad range of active temperature which also enhances the resistance to SO₂ and H₂O.     

Study on chemisorption of H<Subscript>2</Subscript>, O<Subscript>2</Subscript>, CO and C<Subscript>2</Subscript>H<Subscript>4</Subscript>on Pt-Ag/SiO<Subscript>2</Subscript>catalysts by microcalorimetry and FTIR

Adsorption microcalorimetry has been employed to study the interaction of ethylene with the reduced and oxidized Pt-Ag/SiO₂catalysts with different Ag contents to elucidate the modified effect of Ag towards the hydrocarbon processing on platinum catalysts. In addition, microcalorimetric adsorption of H₂, O₂, CO and FTIR of CO adsorption were conducted to investigate the influence of Ag on the surface structure of Pt catalyst. It is found from the microcalorimetric results of H₂and O₂adsorption that the addition of Ag to Pt/SiO₂leads to the enrichment of Ag on the catalyst surface which decreases the size of Pt surface ensembles of Pt-Ag/SiO₂catalysts. The microcalorimetry and FTIR of CO adsorption indicates that there still exist sites for linear and bridged CO adsorption on the surface of platinum catalysts simultaneously although Ag was incorporated into Pt/SiO₂. The ethylene microcalorimetric results show that the decrease of ensemble size of Pt surface sites suppresses the formation of dissociative species (ethylidyne) upon the chemisorption of C₂H₄on Pt-Ag/SiO₂. The differential heat vs. uptake plots for C₂H₄adsorption on the oxygen-preadsorbed Pt/SiO₂and Pt-Ag/SiO₂catalysts suggest that the incorporation of Ag to Pt/SiO₂could decrease the ability for the oxidation of C₂H₄.     

No-Glycerol rapid heterogeneous biodiesel production on K<Subscript>2</Subscript>CO<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by coupling process

Biodiesel containing almost no glycerol has been produced by coupling reaction carried out over K₂CO₃ supported by calcium oxide as solid base catalysts. The solid base catalysts synthesized by wet impregnation exhibit an exceedingly high activity in biodiesel production. It was found that the reaction time required for the highest yield of biodiesel, 99.2%, can be shortened to 30 min over K₂CO₃/Al₂O₃ under the optimum reaction conditions: 8: 1: 1 molar ratio of methanol/DMC/oil, 30 wt % K₂CO₃/Al₂O₃ catalyst, and 65°C reaction temperature. Solid basic catalysts examined in the study were characterized by BET surface area, XRD, CO₂-TPD, and SEM techniques. The strong interaction between K₂CO₃ and the support yields a new basic active site, which can be probably responsible for the high activity of K₂CO₃/Al₂O₃.     

Oxovanadium(IV) and dioxomolybdenum(VI) salen complexes tethered onto amino-functionalized SBA-15 for the epoxidation of cyclooctene

Oxovanadium(IV) and dioxomolybdenum(VI) salen complexes were firstly tethered onto amino-functionalized mesoporous SBA-15 materials by a stepwise procedure and were screened as catalysts for the epoxidation of cyclooctene. The mesoporous structural integrity throughout the tethering procedure, the successful tethering of the organometallic complexes, the loadings of metal ions and organic ligands as well as the catalyst surface constitution and location of active organometallic species on the SBA-15 support were determined by comprehensive characterization techniques such as XRD, N₂ adsorption/desorption, FT-IR, UV–vis spectroscopy, ICP-AES, XPS and TG/DTA. Catalytic properties in the epoxidation of cyclooctene demonstrate that both tethered oxovanadium(IV) and dioxomolybdenum(VI) catalysts were more active than their respective homogeneous analogue, and the tethered oxovanadium(IV) complex showed the best activity (64.3%) with H₂O₂ as the oxidant and CH₃CN as the solvent.     

Mechanistic study of Ce-modified MnO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/TiO<Subscript>2</Subscript> catalysts with high NH<Subscript>3</Subscript>-SCR performance and SO<Subscript>2</Subscript> resistance at low temperatures

A series of Ce–MnO _x /TiO₂ catalysts were prepared using a novel sol–gel template method and investigated for low-temperature selective catalytic reduction (SCR) of NO with NH₃ at temperatures ranging from 353 to 473 K. The 0.07Ce–MnO _x /TiO₂ catalyst showed the highest activity and best resistance to SO₂ poisoning. The structure and properties of the catalysts were characterized using X-ray diffraction (XRD) analysis, thermogravimetric analysis (TGA), thermogravimetry (TG)–differential scanning calorimetry (DSC)–mass spectroscopy (MS), high-resolution transmission electron microscopy (HRTEM), Brunauer–Emmett–Teller (BET) measurements, H₂-temperature-programmed reduction (TPR), and NH₃-temperature-programmed desorption (TPD). The superior catalytic activity of the 0.07Ce–MnO _x /TiO₂ catalyst was probably due to a change in the active components, an increase in surface active oxygen and surface acid sites, and lower crystallinity and larger surface area with Ce doping. Furthermore, the reduction ability also became stronger. The SO₂ poisoning resistance of the 0.07Ce–MnO _x /TiO₂ catalyst improved because doping with Ce can effectively decrease the formation of ammonium salt on the catalyst surface and the sulfation of MnO _x . In situ diffuse-reflectance infrared Fourier-transform (DRIFT) spectroscopy experiments indicated that addition of Ce could promote adsorption of NH₃ and inhibit generation of some nitryl species. The SCR reactions over the catalysts mainly followed the Eley–Rideal mechanism accompanied with a partial Langmuir–Hinshelwood mechanism.     

Immobilization of hemoglobin on SBA-15 applied to the electrocatalytic reduction of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

The direct electron transfer between hemoglobin (Hb) and an electrode was realized by first immobilizing the protein onto SBA-15.The results of the immobilization showed that the adsorption was pH-dependent with a maximum adsorption near the isoelectric point of the protein, and SBA-15 with a larger pore diameter showed greater adsorption capacity for Hb. UV–vis spectroscopy and nitrogen adsorption analysis indicated that Hb was adsorbed within the channel of SBA-15 and no significant denaturation occurred to the protein. The Hb/SBA-15 composite obtained was used for the fabrication of a Hb biosensor to detect hydrogen peroxide. A pair of well-defined redox peaks at −0.337 and −0.370 V on the Hb/SBA-15 composite modified glassy carbon electrode was observed, and the electrode reactions showed a surface-controlled process with a single proton transfer at a scan rate range from 20 to 1,000 mV/s. The sensor showed a fast amperometric response, a low detection limit (2.3 × 10⁻⁹ M) and good stability for the detection of H₂O₂. The electrochemical results indicated that the immobilized Hb still retained its biological activity.     

Synthesis of highly ordered mesoporous CeO<Subscript>2</Subscript> and low temperature CO oxidation over Pd/mesoporous CeO<Subscript>2</Subscript>

Highly ordered mesoporous cerium dioxide (meso-CeO₂) was successfully synthesized using a facile solvent-free infiltration method from a mesoporous silica template, KIT-6. The meso-CeO₂ material, thus obtained, exhibited well-defined mesostructure and high surface area (153 m² g⁻¹). The physicochemical properties of meso-CeO₂ material and Pd-supported on meso-CeO₂ (Pd/meso-CeO₂) were characterized by electron microscopy, X-ray diffraction, N₂ adsorption–desorption, and temperature-programmed experiments. The Pd/meso-CeO₂ catalyst exhibited excellent catalytic activity for CO oxidation compared with those of other Pd/CeO₂ catalysts which were prepared using nanocrystalline CeO₂ and bulk-CeO₂ as the supports. Moreover, a hydrogen pretreatment of the Pd/meso-CeO₂ catalyst resulted in a remarkable increase of catalytic activity (T ₁₀₀ = 52 °C).     

Performance and characterisation of CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>-WO<Subscript>3</Subscript> catalysts for selective catalytic reduction of NO with NH<Subscript>3</Subscript>

Ce-Ti-W-O _x catalysts were prepared and applied to the NH₃-selective catalytic reduction (SCR) reaction. The experimental results showed that the Ce-Ti-W-O _x catalyst prepared by the hydrothermal method exhibited higher NO conversion than those synthesised via the sol-gel and impregnating methods, while the optimal content of WO₃ and molar ratio of Ce/Ti were 20 mass % and 4: 6, respectively. Under these conditions, the catalyst exhibited the highest level of catalytic activity (the NO conversion reached values higher than 90 %) across a wide temperature range of 225–450°C, with a range of gas hourly space velocity (GHSV) of 40000–140000 h^?1. The catalyst also exhibited good resistance to H₂O and SO₂. The influences of morphology, phase structure, and surface properties on the catalytic performance were investigated by N₂ adsorption-desorption measurement, XRD, XPS, H₂-TPR, and SEM. It was found that the high efficiency of NO removal was due to the large BET surface area, the amorphous surface species, the change to element valence states, and the strong interaction between Ce, Ti, and W.     

Gold catalysts supported on ZnO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for low-temperature CO oxidation

Gold catalysts with loadings ranging from 0.5 to 7.0 wt% on a ZnO/Al₂O₃ support were prepared by the deposition–precipitation method (Au/ZnO/Al₂O₃) with ammonium bicarbonate as the precipitation agent and were evaluated for performance in CO oxidation. These catalysts were characterized by inductively coupled plasma-atom emission spectrometry, temperature programmed reduction, and scanning transmission electron microscopy. The catalytic activity for CO oxidation was measured using a flow reactor under atmospheric pressure. Catalytic activity was found to be strongly dependent on the reduction property of oxygen adsorbed on the gold surface, which related to gold particle size. Higher catalytic activity was found when the gold particles had an average diameter of 3–5 nm; in this range, gold catalysts were more active than the Pt/ZnO/Al₂O₃ catalyst in CO oxidation. Au/ZnO/Al₂O₃ catalyst with small amount of ZnO is more active than Au/Al₂O₃ catalyst due to higher dispersion of gold particles.     

Promoted porous Co<Subscript>3</Subscript>O<Subscript>4</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for ammonia decomposition

Transition metal catalysts have been considerably used for NH₃ decomposition because of the potential application in CO_x-free H₂ generation for fuel cells. However, most transition metal catalysts prepared via traditional synthetic approaches performed the inferior stability due to the agglomeration of active components. Here, we adopted an efficient method, aerosol-assisted self-assembly approach (AASA), to prepare the optimized cobalt-alumina (Co₃O₄-Al₂O₃) catalysts. The Co₃O₄-Al₂O₃ catalysts exhibited excellent catalytic performance in the NH3 decomposition reaction, which can reach 100% conversion at 600 °C and maintain stable for 72 h at a gaseous hourly space velocity (GHSV) of 18000 cm³ g_cat^?1 h^?1. The catalysts were characterized by various techniques including transmission electron microscope (TEM), scanning electron microscope (SEM), nitrogen sorption, temperature-programmed reduction by hydrogen (H₂-TPR), ex-situ/in-situ Raman and ex-situ/in-situ X-ray diffraction (XRD) to obtain the information about the structure and property of the catalysts. H₂-TPR and in-situ XRD results show that there is strong interaction between the cobalt and alumina species, which influences the redox properties of the catalysts. It is found that even a low content of alumina (10 at%) is able to stabilize the catalysts due to the adequate dispersion and rational interaction between different components, which ensures the high activity and superior stability of the cobalt-alumina catalysts.     

Selective catalytic oxidation of ammonia into nitrogen and water vapour over transition metals modified Al<Subscript>2</Subscript>O<Subscript>3</Subscript>, TiO<Subscript>2</Subscript> and ZrO<Subscript>2</Subscript>

Copper or iron supported on commercially available oxides, such as γ-Al₂O₃, TiO₂ (anatase) and monoclinic tetragonal ZrO₂ (mt-ZrO₂) were tested as catalysts for selective catalytic oxidation of ammonia into nitrogen and water vapour (NH₃-SCO) in the low temperature range. Different commercial oxides were used in this study to determine the influence of the specific surface area, acidic nature of the support and crystalline phases as well as of the type of species and aggregation state of transition metals on the catalytic performance in selective ammonia oxidation. Copper modified oxide supports were found to be more active and selective to nitrogen than catalysts impregnated with iron. Activities of both transition metal modified samples decreased in the following order: mt-ZrO₂, TiO₂ (anatase), γ-Al₂O₃. Quantitative total ammonia conversion was achieved with the Cu/ZrO₂ catalytic system at 400°C. Characterisation techniques, e.g. H₂-temperature programmed reduction, UV-VIS-diffuse reflectance spectroscopy, suggest that easily reducible copper oxide species are important in achieving high catalytic performances at low temperatures.     

Study of <Emphasis Type="Italic">n</Emphasis>-hexane isomerization on Pt/SO<Subscript>4</Subscript>/ZrO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts: Effect of the state of platinum on catalytic and adsorption properties

The state of surface Pt atoms in the Pt/SO₄/ZrO₂/Al₂O₃ catalyst and the effect of the state of platinum on its adsorption and catalytic properties in the reaction of n-hexane isomerization were studied. The Pt-X/Al₂O₃ alumina-platinum catalysts modified with various halogens (X = Br, Cl, and F) and their mechanical mixtures with the SO₄/ZrO₂/Al₂O₃ superacid catalyst were used in this study. With the use of IR spectroscopy (CO_ads), oxygen chemisorption, and oxygen-hydrogen titration, it was found that ionic platinum species were present on the reduced form of the catalysts. These species can adsorb to three hydrogen atoms per each surface platinum atom. The specific properties of ionic platinum manifested themselves in the formation of a hydride form of adsorbed hydrogen. It is believed that the catalytic activity and operational stability of the superacid system based on sulfated zirconium dioxide were due to the participation of ionic and metallic platinum in the activation of hydrogen for the reaction of n-hexane isomerization.     

Synergetic effect in PdAu/CeO<Subscript>2</Subscript> catalysts for the low-temperature oxidation of CO

Gold-palladium catalysts supported on cerium oxide were synthesized with the double complex salts. X-ray photoelectron spectroscopy (XPS) and other physicochemical methods (TEM, TPR) were used to demonstrate that synthesis of highly active palladium catalysts requires the oxidative treatment stimulating the formation of a catalytically active surface solid solution Pd _x Ce_1?x O₂, which is responsible for the lowtemperature activity (LTA) in the reaction CO + O₂. In the case of gold catalysts, active sites for the lowtemperature oxidation of CO are represented by gold nanoparticles and its cationic interface species. Simultaneous deposition of two metals increases the catalyst LTA due to interaction of both gold and palladium with the support surface to form a Pd_1?x CexO₂ solid solution and cationic interface species of palladium and gold on the boundary of Pd-Au alloy particles anchored on the solid solution surface.