Effect of laser annealing on crystallinity of the Si layers in Si/SiO2 multiple quantum wells

We report on continuous-wave laser induced crystallisation processes occurring in Si/SiO₂ multiple quantum wells (MQW), prepared by remote plasma enhanced chemical vapour deposition of amorphous Si and SiO₂ layers on quartz substrates. The size and the volume fraction of the Si nanocrystals in the layers were estimated employing micro-Raman spectroscopy. It was found that several processes occur in the Si/SiO₂ MQW system upon laser treatment, i.e. amorphous to nanocrystalline conversion, Si oxidation and dissolution of the nanocrystals. The speed of these processes depends on laser power density and the wavelength, as well as on the thickness of Si-rich layers. At optimal laser annealing conditions, it was possible to achieve ∼100% crystallinity for 3, 5 and 10 nm thickness of deposited amorphous Si layers. Crystallization induced variation of the light absorption in the layers can explain the complicated process of Si nanocrystals formation during the laser treatment.     

Nanostructuring Si surface and Si/SiO2 interface using porous-alumina-on-Si template technology. Electrical characterization of Si/SiO2 interface

In this work, anodic porous alumina thin films with pores in the nanometer range are grown on silicon by electrochemistry and are used as masking material for the nanopatterning of the silicon substrate. The pore diameter and density are controlled by the electrochemical process. Through the pores of the alumina film chemical oxidation of the silicon substrate is performed, leading to the formation of regular arrays of well-separated stoichiometric silicon dioxide nanodots on silicon, with a density following the alumina pores density and a diameter adjustable by adjusting the chemical oxidation time. The alumina film is dissolved chemically after the SiO₂ nanodots growth, revealing the arrays of silicon dioxide dots on silicon. In a next step, the nanodots are also removed, leaving a nanopatterned bare silicon surface with regular arrays of nanopits at the footprint of each nanodot. This silicon surface structuring finds interesting applications in nanoelectronics. One such application is in silicon nanocrystals memories, where the structuring of the oxidized silicon surface leads to the growth of discrete silicon nanocrystals of uniform size. In this work, we examine the electrical quality of the Si/SiO₂ interface of a nanostructured oxidized silicon surface fabricated as above and we find that it is appropriate for electronic applications (an interface trap density below 1–3×10¹⁰ eV⁻¹ cm⁻² is obtained, indicative of the high quality of the thermal silicon oxide).     

Electroluminescence from Si／SiO2 films deposited on p—Si substrates

The structure of Au/Si/SiO₂/p-Si has been fabricated using the magnetron sputtering technique. It has a very good rectifying behaviour. Visible electroluminescence (EL) has been observed from the Au/Si/SiO₂/p-Si structure at a forward bias of 5V or larger. A broad band with one peak around 650－660 nm appears in all the EL spectra of the structure. The effects of the thickness of the Si layer in the Si/SiO₂ films and of the input electrical power on EL spectra are studied systematically.     

Room temperature visible light emission from Si/SiO2 multilayers: Roles of interface electronic states and silicon phase

We have studied luminescence properties and microstructure of 20 patterns Si/SiO₂ multilayers. The photoluminescence spectra consist of two gaussian bands in the visible-infrared spectral region. It has been demonstrated that the strong PL band is caused by the radiative recombination in the Si/SiO₂ interfaces states, whereas the weaker band originates from radiative recombination in the nanosized Si layers. The peak shift of this latter band shows a discontinuity that corresponds to a crystalline-to-amorphous phase change when the Si layers are thinner than 30 Å. The peak energy as a function of the layer thickness is interpreted using a quantum confinement model in the case of amorphous Si layers.     

SiO2/Si衬底上石墨烯的制备与结构表征

在分子束外延(MBE)设备中,利用直接沉积C原子的方法在覆盖有SiO₂的Si衬底(SiO₂/Si)上生长石墨烯,并通过Raman光谱和近边X射线吸收精细结构谱等实验技术对不同衬底温度(500℃,600℃,700℃,900℃,1100℃,1200℃)生长的薄膜进行结构表征.实验结果表明,在衬底温度较低时生长的薄膜是无定形碳,在衬底温度高于700℃时薄膜具有石墨烯的特征,而且石墨烯的结晶质量随着衬底温度的升高而改善,但过高的衬底温度会使石墨烯质量降低.衬底温度为1100℃时结晶质量最好.衬底温度较低时C原子活性较低,难以形成有序的C-sp²六方环.而衬底温度过高时(1200℃),衬底表面部分SiO₂分解,C原子与表面的Si原子或者O原子结合而阻止石墨烯的形成,并产生表面缺陷导致石墨烯结晶变差.     

Si/SiO2 multilayers: synthesis by reactive magnetron sputtering and photoluminescence emission

This paper relates a complete study of Si/SiO₂ multilayer (ML) structures. First, we suggest an original way of synthesis based on reactive magnetron sputtering of a pure silica target. The photoluminescence spectra of these MLs consist of two Gaussian bands in the visible-near infrared spectral region. The stronger one (I band) is fixed at about 780 nm and probably due to interface states. The weaker one (Q band) is tuneable with the Si sublayer thickness and originates from a radiative recombination within the nanosized Si layers. For this latter band the peak position is a function of the Si sublayer thickness and shows a discontinuity at 30 Å. This corresponds to an Si phase change. For thicknesses above 30 Å, the sublayers are composed of nanocrystalline silicon whereas below 30 Å the sublayers are made of amorphous silicon. We develop a model based on a quantum well to which we have added an interfacial region between Si and SiO₂. It is characterised by an interfacial potential of 0.3 eV. This model depicts the simultaneous behaviour of Q and I bands for an Si sublayer thickness below 30 Å.     

XPS investigation of diffusion of two-layer ZrO2/SiO2 and SiO2/ZrO2 sol–gel films

Two-layer ZrO₂/SiO₂ and SiO₂/ZrO₂ films were deposited on K9 glass substrates by sol–gel dip coating method. X-ray photoelectron spectroscopy (XPS) technique was used to investigate the diffusion of ZrO₂/SiO₂ and SiO₂/ZrO₂ films. To explain the difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films, porous ratio and surface morphology of monolayer SiO₂ and ZrO₂ films were analyzed by using ellipsometry and atomic force microscopy (AFM). We found that for the ZrO₂/SiO₂ films there was a diffusion layer with a certain thickness and the atomic concentrations of Si and Zr changed rapidly; for the SiO₂/ZrO₂ films, the atomic concentrations of Si and Zr changed relatively slowly, and the ZrO₂ layer had diffused through the entire SiO₂ layer. The difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films was influenced by the microstructure of SiO₂ and ZrO₂.     

Further indication of a low quartz structure at the SiO2/Si interface from coincidence Doppler broadening spectroscopy

Results from coincidence Doppler broadening (CDB) measurements on various Si samples and Brazilian quartz having low quartz structure are presented with the aim to give further strong indication of the existence of a low quartz structure, but not of Si divacancies as frequently considered, at the SiO₂/Si interface.     

Anneal temperature dependence of Si/SiO2 superlattices photoluminescence

Photoluminescence spectroscopy, Fourier transform infrared spectroscopy, X-ray reflectometry and high resolution electron microscopy have been used to interpret the photoluminescence properties of annealed (3/19 nm) Si/SiO₂ multilayers grown by reactive magnetron sputtering. The multilayers show an emission in the visible and near-infrared range after heat treatment from 900°C which tends to decrease from 1200°C. Three different origins for the photoluminescence activity have been found. An anneal temperature of 1200°C is necessary to optimise the silicon crystallisation within the silicon sublayers.     

Preparation and characterization of novel Pd/SiO2 and Ca-Pd/SiO2 egg-shell catalysts with porous hollow silica

Novel egg-shell structured monometallic Pd/SiO₂ and bimetallic Ca-Pd/SiO₂ catalysts were prepared by an impregnation method using porous hollow silica (PHS) as the support and PdCl₂ and Ca(NO₃)₂·4H₂O as the precursors. It was found from transmission electron microscope (TEM), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) that Pd was loaded on PHS with a particle size of 5-12 nm in Pd/SiO₂ samples and the Pd particle size in Ca-Pd/SiO₂ was smaller than that in Pd/SiO₂ since Ca could prevent Pd particles from aggregating. X-ray photoelectron spectroscopy (XPS) analyses exhibited that Pd 3d_5/2 binding energies of Pd/SiO₂ and Ca-Pd/SiO₂ were 0.2 and 0.9 eV lower than that of bulk Pd, respectively, as a result of the shift of the electron cloud from Pd to oxygen in Pd/SiO₂ and to both oxygen and Ca in Ca-Pd/SiO₂. The activity of Ca-Pd/SiO₂ egg-shell catalyst for CO hydrogenation and the selectivity to methanol, with a value of 36.50 mmol_CO mol⁻¹_Pd s⁻¹ and 100%, respectively, were much higher than those of the catalysts prepared with traditional silica gel as the support, owing to the porous core-shell structure of the PHS support.     

Influence of patterning on the nucleation of Ge islands on Si and SiO2 surfaces

Surface patterning is expected to influence the nucleation site of deposited nanostructures. In the present study, clean Si and SiO₂ surfaces were patterned by a nanolithographic process using a Focused Ion Beam (FIB). Ge was evaporated in ultra high vacuum at 873 K on these substrates, resulting in the formation of island arrays. Based on scanning tunneling microscopy and atomic force microscopy images, a statistical analysis was performed in order to highlight the effect of patterning on the size distribution of islands compared to a non-patterned surface. We find that the self-organization mechanism on patterned substrates results in a very good arrangement and positioning of Ge nanostructures, depending on growth conditions and holes distance, both on Si and SiO₂ surfaces.     

Silicon nanoparticles formation in annealed SiO/SiO2 multilayers

We present a study on amorphous SiO/SiO₂ superlattice performed by grazing-incidence small-angle X-ray scattering (GISAXS). Amorphous SiO/SiO₂ superlattices were prepared by high-vacuum evaporation of 3 nm thin films of SiO and SiO₂ (10 layers each) onto Si(1 0 0) substrate. After the deposition, samples were annealed at 1100 °C for 1 h in vacuum, yielding to Si nanocrystals formation. Using a Guinier approximation, the shape and the size of the crystals were obtained. The size of the growing nanoparticles in the direction perpendicular to the film surface is well controlled by the bilayer thickness. However, their size varies more significantly in the direction parallel to the film surface.     

Dielectric properties of barium titanate ceramics modified by SiO2 and by BaO-SiO2

The influence of SiO₂ on the dielectric properties of barium titanate ceramics was investigated. SiO₂ had been doped solely and together with BaO into barium titanate before calcination. X-ray diffraction showed that all the ceramics were of a pure perovskite phase after sintering at 1275 °C for 2 h. For SiO₂-doping, there was about 2.5 °C increase in Curie temperature per molar percentage of doping and the leakage current was obviously increased, especially at low voltages for relatively high doping levels. While for the co-doping of SiO₂ and BaO, there was little change in Curie temperature. The point defects formed through the dopings were proposed responsible for the effects. It was suggested that SiO₂ is important to barium titanate ceramics not only for sintering but also for modifying their properties.     

SiO2的赝晶化及AlN/SiO2纳米多层膜的超硬效应

采用反应磁控溅射法制备了一系列不同SiO₂层厚度的AlN/SiO₂纳米多层膜，利用X射线衍射仪、高分辨透射电子显微镜和微力学探针表征了多层膜的微结构和力学性能，研究了SiO₂层在多层膜中的晶化现象及其对多层膜生长方式及力学性能的影响. 结果表明，由于受AlN六方晶体结构的模板作用，溅射条件下以非晶态存在的SiO₂层在其厚度小于0.6 nm时被强制晶化为与AlN相同的六方结构赝晶体并与AlN形成共格外延生长. 由于不同模量的两调制层存在晶格错配度，多层膜中产生了拉、压交变的应力场，使得多层膜产生硬度升高的超硬效应. SiO₂随层厚的进一步增加又转变为以非晶态生长，多层膜的外延生长结构受到破坏，其硬度也随之降低. 关键词： 2纳米多层膜')" href="#">AlN/SiO₂纳米多层膜 赝晶化 应力场 超硬效应     

The effect of Si surface nitridation on the interfacial structure and electrical properties of (La2O3)0.5(SiO2)0.5 high-k gate dielectric films

Thermal stability, interfacial structures and electrical properties of amorphous (La₂O₃)_0.5(SiO₂)_0.5 (LSO) films deposited by using pulsed laser deposition (PLD) on Si (1 0 0) and NH₃ nitrided Si (1 0 0) substrates were comparatively investigated. The LSO films keep the amorphous state up to a high annealing temperature of 900 °C. HRTEM observations and XPS analyses showed that the surface nitridation of silicon wafer using NH₃ can result in the formation of the passivation layer, which effectively suppresses the excessive growth of the interfacial layer between LSO film and silicon wafer after high-temperature annealing process. The Pt/LSO/nitrided Si capacitors annealed at high temperature exhibit smaller CET and EOT, a less flatband voltage shift, a negligible hysteresis loop, a smaller equivalent dielectric charge density, and a much lower gate leakage current density as compared with that of the Pt/LSO/Si capacitors without Si surface nitridation.     

Tunable photoluminescence and electroluminescence of size-controlled silicon nanocrystals in nanocrystalline-Si/SiO2 superlattices

We present photoluminescence and electroluminescence of silicon nanocrystals deposited by plasma-enhanced chemical vapor deposition (PECVD) using nanocrystalline silicon/silicon dioxide (nc-Si/SiO₂) superlattice approach. This approach allows us to tune the nanocrystal emission wavelength by varying the thickness of the Si layers. We fabricate light emitting devices (LEDs) with transparent indium tin oxide (ITO) contacts using these superlattice materials. The current-voltage characteristics of the LEDs are measured and compared to Frenkel-Poole and Fowler-Nordheim models for conduction. The EL properties of the superlattice material are studied, and tuning, similar to that of the PL spectra, is shown for the EL spectra. Finally, we observe the output power and calculate the quantum efficiency and power conversion efficiency for each of the devices.     

Characteristics of nodular defect in HfO2/SiO2 multilayer optical coatings

Laser-induced damage is associated with nodular defects in HfO₂/SiO₂ multilayer films. In order to investigate the damage characteristics of HfO₂/SiO₂ multilayer mirrors and find the information of improving laser-induced damage threshold, nodular defects are characterized by multiple analytical techniques; the damage morphologies induced by nodular-ejections are presented; the depths of nodular-ejection pits are investigated; the laser-induced damage threshold of zero probability and the stabilities of nodular-ejection pits exposed to repetitive illuminations are studied. Results show that domes in the film surface are nodular defects. Reliable depth information of nodular-ejection pits is obtained by counting layers from the damage edge. The depth statistical result implies nodular defects in these samples are usually originated from deep seeds. Some process optimizations suggestions are given based on the depth information. A simple tractable method is proposed to determine the functional damage threshold of these HfO₂/SiO₂ multilayer films basing on the damage experiments.     

Enhanced nonlinear optical absorption of Au/SiO2 nano-composite thin films

Nano metal-particle dispersed glasses are the attractive candidates for nonlinear optical material applications.Au/SiO 2 nano-composite thin films with 3 vol% to 65 vol% Au are prepared by inductively coupled plasma sputtering.Au particles as perfect spheres with diameters between 10 nm and 30 nm are uniformly dispersed in the SiO 2 matrix.Optical absorption peaks due to the surface plasmon resonance of Au particles are observed.The absorption property is enhanced with the increase of Au content,showing a maximum value in the films with 37 vol% Au.The absorption curves of the Au/SiO 2 thin films with 3 vol% to 37 vol% Au accord well with the theoretical optical absorption spectra obtained from Mie resonance theory.Increasing Au content over 37 vol% results in the partial connection of Au particles,whereby the intensity of the absorption peak is weakened and ultimately replaced by the optical absorption of the bulk.The band gap decreases with Au content increasing from 3 vol% to 37 vol % but increases as Au content further increases.     

Theoretical analysis of structure, thermodynamic properties, and optical properties of Ge-doped amorphous SiO2

Different stable geometric configurations of Ge doped amorphous SiO₂ (a-SiO₂) system, originating from one, two, or three Si atoms in various places of the a-SiO₂ substituted by Ge atoms randomly have been investigated using interatomic potentials in this work. The most stable structures have been identified and corresponding evolutional rules obtained. The structural growth pattern for Ge-doped a-SiO₂ system is that Ge atoms tend to spread far away from each other and keep away from the center. Furthermore, the thermodynamic properties including speci?c heat, Debye temperature, vibrational entropy, and so on are calculated from the structure with 16 Si atoms of the constructed a-SiO₂ cell replaced by Ge atoms and with the biggest Ge-Ge distance. It can be seen that entropy of Ge doped system with larger specific heat is higher than that of the pure system with smaller specific heat. At last, optical properties including optical absorption spectrum and electron energy loss function of nGe-doped a-SiO₂ (n=0-3, 8) system is also obtained.     

ZnSe/SiO2复合薄膜光学常数与荧光光谱的研究

采用溶胶-凝胶工艺与原位生长技术，制备了ZnSe/SiO₂复合薄膜.X射线衍射分 析表明薄膜中ZnSe晶体呈立方闪锌矿结构.X射线荧光分析结果显示薄膜中Zn与Se摩尔比为1 ∶1.01—1∶1.19.利用场发射扫描电子显微镜观察了复合薄膜的表面形貌，结果表明复合薄 膜表面既存在尺寸约为400nm的ZnSe晶粒，也存在尺寸小于100nm的ZnSe晶粒.利用椭偏仪测 量了薄膜椭偏角Ψ，Δ与波长λ的关系，采用Maxwell-Garnett有效介质理论对薄膜的光学 常数、厚度、气孔率、ZnS 关键词： 2复合薄膜')" href="#">ZnSe/SiO₂复合薄膜 光学性质 椭偏光度法 荧光光谱