强迫摆型碰撞振子的弹性周期解

本文考虑一类具有强迫力的摆型碰撞振子无穷多次调和的弹性周期解的存在性.通过坐标变换的方法把碰撞系统转化为定义在全平面上的等价系统,再运用相平面分析的方法对变换后系统的解的动力行为进行分析,通过在改进的Poincar映射上应用Poincar-Birkhoff扭转定理得到了无穷多次调和的弹性周期解的存在性.     

渐近线性碰撞振子的不变环面

利用后继映射和推广的Moser扭转定理证明了渐近线性碰撞振子的不变环面和拟周期解的存在性.     

一类超线性Hill型对称碰撞方程的周期运动

本文考虑一类超线性Hill型对称碰撞方程的对称碰撞周期解的存在性、重性和分布问题.通过坐标变换的方法把碰撞相平面转化为全平面进行研究,在一类关于时间映射的超线性条件下证明有外力方程无穷多个对称碰撞调和解和对称碰撞次调和解的存在性;同时研究在没有外力时方程的对称碰撞周期解的稠密性分布.本文还给出对称碰撞方程对称碰撞周期解存在的充分条件.     

一维相对论振子运动的研究

该文运用椭圆积分的理论，给出了一维相对论振子运动的解析解以及振子的振动周期. 指出相对论振子的振动周期不但与振子的固有性质有关，而且还与振子的振幅有关.     

一类厄尔尼诺-南方涛动耦合时滞振子动力系统北大核心CSCD

讨论了厄尔尼诺-南方涛动(ENSO)大气物理动力系统.利用对时滞函数幂级数展开和微分方程解析理论,得到了海-气振子系统的幂级数解,并通过弱阻尼和强阻尼两个典型的例子叙述了相应解在对应的相平面上的轨线的发展趋势.从而指出了海-气振子的后效情况.     

一类厄尔尼诺-南方涛动耦合时滞振子动力系统

讨论了厄尔尼诺-南方涛动(ENSO)大气物理动力系统.利用对时滞函数幂级数展开和微分方程解析理论,得到了海-气振子系统的幂级数解,并通过弱阻尼和强阻尼两个典型的例子叙述了相应解在对应的相平面上的轨线的发展趋势.从而指出了海-气振子的后效情况.     

广义达芬振子的广义李对称和完全可积性

本文考虑了广义达芬振子的广义李对称及完全可积性。证明了当达芬振子具无穷多个对称时变系数所满足的条件等价于当达芬振子被变换为可积达芬振子时变系数所满足的条件，同时文章给出了这些对称代数的结构。     

一类碰撞振动系统的余维二分叉和Hopf分叉*

本文研究弹簧质量系统对无穷大平面碰撞振动的分叉问题。证明了在接近完全弹性碰撞和在一些特殊的频率比附近,存在余维二分叉现象。利用映射的正则型理论,将Poincaré映射变换成含两个参数的正则型,通过分析该正则型,我们得到周期倍化分叉、周期1点、2点的Hopf分叉。并进行了数值验证。     

附加非线性振子的双稳态电磁式振动能量捕获器动力学特性研究

随着微机电科技的进步,利用环境振动进行系统自供电已经成为目前非线性动力学研究的热点.将质量-弹簧-阻尼系统与双稳态振动能量捕获系统相结合,提出了附加非线性振子的双稳态电磁式振动能量捕获器,建立系统的力学模型及控制方程.通过数值仿真研究了简谐激励下质量比和调频比发生变化时附加非线性振子的双稳态电磁式振动能量捕获器的动力学响应.通过与附加线性振子双稳态系统的对比,获得了上述参数对附加非线性振子的双稳态电磁式振动能量捕获器发生大幅运动的影响规律,显示出附加非线性振子的双稳态电磁式振动能量捕获器的优越性,并获得了附加非线性振子的双稳态电磁式振动能量捕获器发生连续大幅混沌运动的最优参数配合.上述研究结果为双稳态电磁式振动能量捕获系统的相关研究提供了理论基础.     

关于一维相对论振子

本文用求解相对论振子运动方程的方法,不仅得出了R.Penfield和H.Zatzkis从能量守恒原理出发推得的振子位置、振子速度与时间的关系式,且还得到了一个较之更一般(即不必附加t值甚大条件)的关系式。     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

Peridynamics via finite element analysis

Peridynamics is a recently developed theory of solid mechanics that replaces the partial differential equations of the classical continuum theory with integral equations. Since the integral equations remain valid in the presence of discontinuities such as cracks, the method has the potential to model fracture and damage with great generality and without the complications of mathematical singularities that plague conventional continuum approaches. Although a discretized form of the peridynamic integral equations has been implemented in a meshless code called EMU, the objective of the present paper is to describe how the peridynamic model can also be implemented in a conventional finite element analysis (FEA) code using truss elements. Since FEA is arguably the most widely used tool for structural analysis, this implementation may hasten the verification of peridynamics and significantly broaden the range of problems that the practicing analyst might attempt. Also, the present work demonstrates that different subregions of a model can be solved with either the classical partial differential equations or the peridynamic equations in the same calculation thus combining the efficiency of FEA with the generality of peridynamics. Several example problems show the equivalency of the FEA and the meshless peridynamic approach as well as demonstrate the utility and robustness of the method for problems involving fracture, damage and penetration.     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

The Cauchy problem for ut=Δu+|∇u|

With q a positive real number, the nonlinear partial differential equation in the title of the paper arises in the study of the growth of surfaces. In that context it is known as the generalized deterministic KPZ equation. The paper is concerned with the initial-value problem for the equation under the assumption that the initial-data function is bounded and continuous. Results on the existence, uniqueness, and regularity of solutions are obtained.     

含有批处理机的三机流水作业加工总长问题在某些情形下的强NP困难性

本文研究含有批处理机的三台机器流水作业加工总长问题在某些情形下的计算复杂性。在批处理机上同时加工的工件组成一个工件批，一个工件批的所有工件同时开始、同时结束。当批处理机的容量有限时，我们证明了下列情形为强NP困难的：第一台机器是批处理机、其余两台机器是单机；第二台机器是单机、其余两台机器是批处理机；第三台机器是批处理机、其余两台机器是单机。     

On a class of Riemann surfaces

It is considered the class of Riemann surfaces with dimT1 = 0, where T1 is a subclass of exact harmonic forms which is one of the factors in the orthogonal decomposition of the spaceΩH of harmonic forms of the surface, namely The surfaces in the class OHD and the class of planar surfaces satisfy dimT1 = 0. A.Pfluger posed the question whether there might exist other surfaces outside those two classes. Here it is shown that in the case of finite genus g, we should look for a surface S with dimT1 = 0 among the surfaces of the form Sg\K , where Sg is a closed surface of genus g and K a compact set of positive harmonic measure with perfect components and very irregular boundary.     

A model for predicting the shear bearing capacity of FRP-strengthened beams

The shear failure of reinforced concrete beams needs more attention than the bending failure since no or only small warning precedes the failure. For this reason, it is of utmost importance to understand the shear bearing capacity and also to be able to undertake significant rehabilitation work if necessary. In this paper, a design model for the shear strengthening of concrete beams by using fiber-reinforced polymers (FRP) is presented, and the limitations of the truss model analogy are highlighted. The fracture mechanics approach is used in analyzing the bond behavior between the FRP composites and concrete. The fracture energy of concrete and the axial rigidity of the FRP are considered to be the most important parameters. The effective strain in the FRP when the debonding occurs is determined. The limitations of the anchorage length over the cross section are analyzed. A simple iterative design method for the shear debonding is finally proposed. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 357–372, May–June, 2008.     

Dynamical Spin Susceptibility in the t–J Model in the Superconducting Phase

Dynamical spin susceptibility is calculated for the t–J model in the superconducting phase using the memory function method in terms of the Hubbard operators. The self-consistent system of equations for the memory function is obtained within the mode-coupling approximation. Both itinerant hole excitations and localized spin fluctuations contribute to the memory function. Moreover, the itinerant contribution itself consists of two parts, i.e., the contribution of Bogoliubov quasiparticles and that of Cooper pairs. The spin dynamics is diffusive in the hydrodynamic limit, but the itinerant part does not contribute to the spin diffusion. In the high frequency region, spin–wave-like excitations continue to exist. We discuss our analytic results in the light of neutron scattering experiments performed on the cuprate superconductors.     

Gaussian Versus Optimal Integration of Analytic Functions

We consider error estimates for optimal and Gaussian quadrature formulas if the integrand is analytic and bounded in a certain complex region. First, a simple technique for the derivation of lower bounds for the optimal error constants is presented. This method is applied to Szeg?-type weight functions and ellipses as regions of analyticity. In this situation, the error constants for the Gaussian formulas are close to the obtained lower bounds, which proves the quality of the Gaussian formulas and also of the lower bounds. In the sequel, different regions of analyticity are investigated. It turns out that almost exclusively for ellipses, the Gaussian formulas are near-optimal. For classes of simply connected regions of analyticity, which are additionally symmetric to the real axis, the asymptotic of the worst ratio between the error constants of the Gaussian formulas and the optimal error constants is calculated. As a by-product, we prove explicit lower bounds for the Christoffel-function for the constant weight function and arguments outside the interval of integration. September 7, 1995. Date revised: October 25, 1996.     

基于VAR风险指标的投资组合模糊优化

在二目标有价证券选择基础上 ,引入目前流行的风险指标 VAR,以收益率与风险损失为目标 ,将模糊概念运用于有价证券组合选择 ,按投资者给定的期望目标及容差 ,讨论了 S型隶属函数模型 .通过 VAR的给定 ,将投资者所能承受的最大损失锁定 ,更好地反映出投资者对目标值的取值意图 .依据深圳股票市场9只股票收益率数据 ,采用进化规划进行优化计算 ,并验证模型的有效性 .