水杨酸盐敏化BaF2∶Tb3+纳米粒子中的Tb3+离子发光

采用水热法制备了均匀、单分散的BaF₂∶Tb³⁺纳米粒子,并采用离子交换法制备了水杨酸钠敏化的BaF₂∶Tb³⁺纳米粒子(SS-BaF₂∶Tb³⁺)。 系统地研究了样品的结构、形貌和光致发光性质。 结果表明,监测Tb³⁺离子在547 nm的⁵D₄→⁷F₅跃迁,SS-BaF₂∶Tb³⁺纳米粒子获得了从200 nm到385 nm波长范围宽的激发带;激发SS的π-π^*电子跃迁吸收,由于SS到Tb³⁺的能量传递(“天线效应”),SS-BaF₂∶Tb³⁺纳米粒子产生了增强的Tb³⁺离子绿光发射;敏化纳米粒子中Tb³⁺离子光致发光寿命比未敏化纳米粒子中Tb³⁺离子寿命长。     

SYNTHESES AND SPECTROSCOPIC PROPERTIES OF LANTHANIDE COMPLEXES, Ln(acac)_3(Ph_3PO)_3

A series of new complexes of formula Ln(acac)_s(Ph_3PO)_3 (where Ln~(3+)=Nd~(3+), Sm~(3+), Eu~(3+), Tb~(3+), Ho~(3+)) have been prepared and characterized. The coordination of two ligands with lanthanide ions are studied by IR spectra, ~1H, ~(13)C, ~(31)P-NMR and metal-ligand charge tranafer tranaition is also discussed via electronic adaorption and luminescence spectroscopy.     

Covalently assembly and photophysical properties of novel lanthanide centered hybrid materials by functionalized thioacylureas bridge

A novel molecular precursor (abbreviated as TAM-Si) derives from thioacetaminde (TAM) modified by 3-(triethoxysilyl)-propyl isocyanate (TEPIC) though the hydrogen transfer addition reaction. Then TAM-Si behaves as functional molecular bridge which coordinates to RE³ (Eu³⁺, Tb³⁺) as well as form SiO network with inorganic precursor (TEOS) after a sol–gel process (cohydrolysis and copolycondensation reaction), resulting in the covalently bonded hybrid materials (RE–TAM-Si). On the other hand, the hybrid material of TAM-Si without introduction of RE³⁺ as well has been obtained. SEM pictures indicate that the TAM-Si show the sphere micromorphology with particle size of micrometer dimension while RE–TAM-Si hybrids present different nanometer particle, which suggests that lanthanide ions has influence on the microstructure of hybrid systems through its coordinated effect. The blue emission for TAM-Si hybrids and the narrow-width green and red emissions were achieved for Tb³⁺ and Eu³⁺ ions, respectively, indicating that the intramolecular energy transfer process take place from photoactive group to Tb³⁺ and Eu³⁺ ions in these hybrid microsphere systems. Especially the lifetime and quantum efficiency for europium hybrids have been determined.     

The dependence of photoinduced energy transfer on the orientation of the acceptor with respect to the π-plane of the donor in naphthalene-linked crown ether–Tb complexes

The photoinduced energy transfer (ET) from naphthalene (N) to Tb³⁺ has been studied in the complexes of Tb³⁺ ion with 2,3-naphtho-17-crown-5 ether(I), 2,3-naphtho-20-crown-6 ether(II), 1,8-naphtho-21-crown-6 ether(III) and 1,5-naphtho-22-crown-6 ether(IV), respectively, using nitrate (NO₃⁻) ion as the counter anion in EtOH glass at 77 K. The ligands are so designed that the Tb³⁺ ion can be complexed with a predetermined orientation with respect to the naphthalene molecular plane. In systems I and II, the Tb³⁺ ion is along the Z-axis; in system III, it is along the Y-axis and in IV, it is along the X-axis, where Z- and Y- are the molecular in-plane long and short axes of the naphthalene molecular plane respectively and X- is the out-of plane axis perpendicular to the naphthalene molecular plane. Present studies indicate that the efficiency of energy transfer (ET) and the quenching of naphthalene phosphorescence show a strong dependence on the orientation of the acceptor metal ion (Tb³⁺) with respect to the π-plane of the donor naphthalene moiety. The ET studies suggest that an exchange mechanism involving the lowest (ππ^*) triplet state of N and the ⁵D₄ state of Tb³⁺ ion is predominantly operating. Our observation further indicates that for a given orientation in a complex the emission intensity of the various transitions (⁵D₄ → ⁷F_J, J=2–6) for Tb³⁺, vis-a-vis ET efficiency varies considerably with ΔJ values (=0, +1 and +2).     

A multi-color and white-light emissive cucurbituril/ terpyridine/ lanthanide supramolecular nanofiber

The enhanced lanthanide white-emission in solid by cucurbituril-based supramolecular assembly may provide a new strategy for smart light-emitting materials.     

Peculiarities of the excitation energy transfer in europium and terbium aromatic carboxylates and nitrate complexes with sulfoxides: Blocking effect

The influence of modification of the aromatic ligands on the excitation energy transfer to Ln³⁺ ions in europium and terbium carboxylates and nitrates was examined. The luminescence excitation spectra of three groups of the europium and terbium compounds: phenyl-, diphenyl-, triphenylacetates, phenoxyacetates and triphenylpropionates; 1- and 2-naphthylcarboxylates and 2-naphthoxyacetates; lanthanide nitrates with diarylsulfoxides (diphenyl- and dibenzylsulfoxides) and dialkylsulfoxides were investigated. The spectra of adducts of terbium phenylcarboxylates with 1,10-phenanthroline were also analyzed. The effect of the aliphatic bridges, which decouple the π–π- or p–π-conjugation in the ligand, on the energy transfer to Ln³⁺ ions (so-called blocking effect) was investigated. It was shown, that this decoupling leads to significant lowering of the energy of “ligand–metal ion” charge transfer states (LM CTS) in the europium carboxylate salts, just down to 27,800 cm⁻¹ in europium 2-naphthoxyacetate. As a consequence, the probability of the LM CTS participation in the excitation energy dissipation processes increases. A channel of the excitation energy dissipation in the region of 31,750 cm⁻¹ related to ligand electronic transitions was found in the europium and terbium nitrates with sulfoxides. It was demonstrated that a part of the energy absorbed by the aromatic ligand having aliphatic bridge can be emitted as the ligand fluorescence.     

Preparation and Luminescence Properties of Color-tunable Single-phased LaPO4: Eu3+/Tb3+ Phosphors

A novel series of color-tunable single-phased phosphors La_1-x-yPO₄:xEu³⁺/yTb³⁺(x=0, 0.01, 0.02, 0.03, 0.04, 0.05; y=0, 0.05, 0.10, 0.15, 0.20) was synthesized via microwave-assisted co-precipitation method with diammonium hydrogen phosphate as precipitant. The morphology, crystal structure and photoluminescence properties of the as-prepared samples were characterized by means of X-ray diffraction(XRD), scanning electron microscopy(SEM) and fluorescence spectrophotometer. The results reveal that the as-synthesized samples calcined at 1100℃ display spherical morphology with uniform distribution. Upon excitation with 350 nm ultraviolet radiation, the LaPO₄:Eu³⁺/Tb³⁺ phosphors showed a green light peaking at 543 nm assigned to the characteristic ⁵D₄-⁷F₅ emission of Tb³⁺ and a red light peaking at 591 nm corresponding to the characteristic ⁵D₀-⁷F₁ emission of Eu³⁺ simultaneously. For the Eu³⁺/Tb³⁺ co-activated phosphors, Tb³⁺ acts as an efficient sensitizer to enhance the emission intensity of Eu³⁺ ions. The energy transfer mechanism and the emission color tunability of LaPO₄:Eu³⁺/Tb³⁺ have been studied. The results indicate that a color-tunable luminescence(from green to white to red) can be achieved by adjusting the Eu³⁺/Tb³⁺ doping ratio in the LaPO₄ host matrix.     

Enhancement of luminescence efficiency of f–f transitions from Tb due to energy transfer from Ce in Al2O3 crystalline ceramic powders prepared by low temperature direct combustion synthesis

In this Letter, we report the structural and luminescent properties of Tb:Ce:Al₂O₃ crystalline ceramic powders prepared through combustion synthesis at low temperature (280 °C). The presence of Ce³⁺ (1.0 mol%) in the sample resulted in an enhancement of Tb³⁺ (1.0 mol%) overall emission intensity by a factor of 50. The analysis of the luminescence dynamics for the ⁵D₄ → ⁷F₆ transition (545 nm) of Tb³⁺ demonstrated that the mechanism responsible for the large enhancement of luminescence observed is efficient energy transfer from Ce³⁺ to Tb³⁺.     

Ce3+、Tb3+离子及Ce3+-Tb3+离子对在Sr4Si3O8Cl4基质中发光的研究

研究了Ce³⁺、Tb³⁺、离子及Ce³⁺-Tb³⁺离子对在Sr₄Si₃O₈Cl₄基质中的发射光谱和激发光谱。初步讨论了Ce³⁺、Tb³⁺离子之间发光敏化的机理。     

基于四唑功能位点的Tb~(3+)配位聚合物的构筑及其金属离子荧光检测性能

镧系金属配位聚合物因其独特的组成、结构和性质被广泛应用于荧光识别检测性质研究,但其功能导向构筑依然具有挑战性。本文基于双功能基团配体构筑策略构筑了一例Tb~(3+)配位聚合物[Tb(TZI)(DMF)_2(H_2O)]·(H_2O)(1)((H_3TZI=5-(1-氢-5-四唑基)间苯二甲酸,DMF=N,N-二甲基甲酰胺)),在对其进行详细结构表征的基础上研究了其金属离子识别检测性质。结果表明,基于羧酸和四唑基团与Tb~(3+)离子配位能力的不同,在确保Tb~(3+)配位聚合物成功构筑的同时可将四唑作为识别位点引入配位聚合物框架,使得配合物1可展现出基于金属离子与四唑功能位点配位导致的荧光增强,可实现对Zn~(2+)和Na~+离子的识别检测。本文所报道的结果可为镧系金属配位聚合物的荧光识别检测性质导向构筑提供有价值的参考。     

“Weakley型稀土多金属氧酸盐的制备与发光性质”在无机化学实验教学中的应用

采用理论与实验相结合的方法对稀土多金属氧酸盐的发光性质进行探究。首先,通过常规水溶液法合成了一系列稀土多金属氧簇Na9LnW10O36(Ln^3+=Sm^3+、Eu^3+、Tb^3+、Dy^3+);其次,利用粉末X射线衍射、红外光谱、拉曼光谱对簇合物的结构进行表征;最后,利用紫外-可见光谱、荧光光谱对簇合物的光学性质进行考查。通过系统性的实验使学生对稀土簇合物的结构表征以及发光性质有全面、深刻的认识。     

超微NaY分子筛的合成(Ⅰ)──添加轻稀土离子的影响

导向剂的陈化时间和反应胶的晶化温度可以影响NaY分子筛的晶化行为.随导向剂陈化时间的增加,NaY分子筛的晶化速度加快,晶粒尺寸减小;随晶化温度的升高,NaY分子筛的晶化速度加快,但晶粒尺寸增加.而向合成体系中添加轻稀土离子(Ln³⁺)对NaY分子筛的晶化行为影响更为明显.与未添加稀土离子时相比较,在一定的稀土离子添加量范围内[n(Ln³⁺)/n(Al³⁺)<0.2],NaY分子筛的晶化速度明显加快而晶粒尺寸显著减小,同时所合成出的NaY分子筛的n(SiO₂)/n(Al₂O₃)比也有较大的提高.添加稀土离子使合成体系中形成异晶晶种的Ln(OH)₃微晶,从而进一步引发NaY分子筛的成核.     

Luminescent Properties of Terbium（Ⅲ） and Europium（Ⅲ）Complexes with Six 4-Acetyl-bispyrazolones

The lowest triplet energy levels of the six ligands（T） were determined to be 22989 cm-1[1,3-bis-（1＇-phenyl-3＇-methyl-5＇-pyrazolon-4＇）-1,3-propanedione,BPMPTD],23148 cm-1[1,4-bis-（1＇-phenyl-3＇-methyl-5＇-pyrazolon-4＇）-1,4-butanedione,BPMPBD],23419 cm-1[1,5-bis-（1＇-phenyl-3＇-methyl-5＇-pyrazolon-4＇）-1,5-pentane-dione,BPMPPD],23310 cm-1[1,6-bis-（1＇-phenyl-3＇-methyl-5＇-pyrazolon-4＇）-1,6-hexanedione,BPMPHD],21978 cm-1[1,9-bis-（1＇-phenyl-3＇-methyl-5＇-pyrazolon-4＇）-l,9-nonanedione,BPMPND] and 21930 cm-1[1,10-bis-（1＇-phenyl-3＇-methyl-5＇-pyrazoion-4＇）-1,10-decanedione,BPMPDD],respectively.It was explained satisfactorily that the six ligands are more efficient for sensitizing the luminescence of Tb3＋ than that of Eu3＋ at room temperature,and the order of the luminescent intensities for the Tb3＋ complexes is explained by the relative energy gap between T and 5DJ of Tb3＋ or Eu3＋.As a conclusion,when 2700 cm-1＜△E（T-5D4）＜3000 cm-1,the luminescent intensity of the Tb3＋ complex is the strongest.This means that the lowest triplet energy level of the ligand is a chief factor to dominate RE3＋luminescence.     

锌-稀土矩形纳米簇的构筑及近红外发光性能

本文设计了一个新型含苯-甲基-苯骨架的席夫碱配体,构筑了两个具有矩形结构的锌-稀土纳米簇[Ln₂Zn₂L₂(OAc)₆] (Ln = Yb (1)和Er (2))。该席夫碱配体以“伸展型”配位模式与稀土离子进行配位,使这些锌-稀土纳米簇表现出较大的分子尺寸结构(0.7 nm × 1.1 nm × 2.2 nm)。荧光性质研究表明,由Zn/L组成的发色基团能有效敏化1和2中Yb³⁺和Er³⁺离子的近红外发光。通过对荧光量子产率及寿命进行分析发现,Zn/L对Yb³⁺离子的传能效率要高于Er³⁺离子。     

Covalently bonded assembly and photoluminescent properties of rare earth/silica/poly(methyl methacrylate-co-maleic anhydride) hybrid materials

Copolymer (MMA-co-MAL) of methyl methacrylate (MMA) and maleic anhydride (MAL) was prepared and grafted by 3-aminopropyltriethoxysilane (APES), which behaves as the structural precursor for functional bridge to assemble the covalently bonded systems through the coordination to rare earth ions (Eu³⁺, Tb³⁺) with carboxylic groups of maleic anhydride. On the other hand, 1,10-phenanthroline (phen) is engaged in a second functional ligand to sensitize the luminescence of RE³⁺ (rare earth ions) by intramolecular energy transfer process. Meanwhile, the cohydrolysis and copolycondensation processes happened between triethoxysilyl of modified copolymer (MMA-co-MAL-APES) and tetraethoxysilane (TEOS) with Si–O covalent bonds, resulting in the polymer-inorganic hybrids (phen-RE-MMA MMA-co-MAL-Si) exhibiting characteristic red or green emissions of Eu or Tb ions. Especially the luminescent quantum efficiencies of europium hybrid systems are estimated and discussed in detail.     

半乳糖醇与氯化稀土配合物的合成及荧光光谱研究

测定了半乳糖醇铽配合物的晶体结构.结果表明,糖的羟基和水分子同时与稀土离子配位,糖的羟基、水分子及氯离子之间形成广泛的氢键网络.红外光谱结果表明,铕和铽对半乳糖醇具有相同的配位方式.本文还测定了荧光光谱,得到稀土离子的特征光谱.     

Studies on beta-type reaction and kinetics of lanthanides with p-bromochloroarsenazo

The reaction behaviour of the β-type chelates of lanthanide ions (Ln³⁺) with p-bromochloroarsenazo (4-CAsA-pB) in 0.01 mol l⁻¹ HClO₄ solution has been studied systematically by a spectrophotometric method. All the lanthanide ions can form β-type chelates with p-bromochloroarsenazo. The maximum absorption wavelength is in the range 727–731 nm, the molar absorptivities are about 6.0 × 10⁴ – 9.0 × 10⁴ cm² mol⁻¹, the composition ratio of Ln³⁺ ions with 4-CAsA-pB is 1:2 and the actual combining ratio is 2:4. The optimum acidity range (ΔpH value) of the formation of β-type chelates has been obtained. Kinetic parameters, such as the reaction order and rate constants, have also been studied and a formation mechanism for the β-type chelates has been proposed.     

尖吻蝮蛇毒抗凝血因子Ⅱ的稀土离子荧光探针研究

尖吻蝮蛇毒抗凝血因子(ACF)分子中有两个钙离子结合位点,钙离子对ACF的内源荧光有增强作用,稀土离子(Nd³⁺,Sm³⁺,Eu³⁺,Gd³⁺和Tb³⁺)能取代ACF分子中的钙离子,并对ACF的内源荧光有不同程度的猝灭作用,其中Tb³⁺接受ACF分子中Trp残基传递的能量后,特征荧光增强.稀土离子与ACF荧光滴定表明,ACF分子中有两个稀土离子结合位点,稀土离子和钙离子在ACF分子中两个结合部位是共同的竞争结合部位.ACF与不同稀土离子之间有相近的表观结合常数K₁或K₂.Tb³⁺与RE³⁺(RE=Nd,Sm,Eu或Gd)间线性自由能关系表明,稀土离子与ACF结合时,没有明显的空间效应.ACF分子中的两个结合位点在结构上都有较大的柔性,这种结构柔性为钙离子在ACF与活化凝血因子X的结合反应中起到的促进作用提供了结构基础.     

Determination of adenosine disodium triphosphate using prulifloxacin-terbium(III) as a fluorescence probe by spectrofluorimetry

A new spectrofluorimetric method is developed for determination of adenosine disodium triphosphate (ATP). The interactions between prulifloxacin (PUFX)–Tb³⁺ complex and adenosine disodium triphosphate has been studied by using UV–vis absorption and fluorescence spectra. Using prulifloxacin–Tb³⁺ as a fluorescence probe, under the optimum conditions, ATP can remarkably enhance the fluorescence intensity of the prulifloxacin–Tb³⁺ complex at λ = 545 nm and the enhanced fluorescence intensity is in proportion to the concentration of ATP. Optimum conditions for the determination of ATP were also investigated. The dynamic range for the determination of ATP is 4.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹, and the detection limit (3 σ/k) is 1.7 × 10⁻⁸ mol L⁻¹. This method is simple, practical and relatively free interference from coexisting substances and can be successfully applied to determination of ATP in real pharmaceutical samples. The mechanism of fluorescence enhancement of prulifloxacin–Tb³⁺ complex by ATP was also discussed.     

Facile Chemical Conversion Synthesis and Luminescence Properties of Uniform YF3 Nanowires

Well-dispersed YF₃ nanowires were synthesized by a designed hydrothermal conversion method with Y(OH)₃ nanowires as precursor. Various equipments were used to characterize the samples. The results show that Y(OH)₃ nanowires precursor was prepared through a simple hydrothermal process, which then served as the precursor for the fabrication of YF₃ nanowires by a hydrothermal process. The whole process was carried out under aqueous conditions without any organic solvent, surfactant or catalyst. The conversion process from Y(OH)₃ precursor to YF₃ nanowires was investigated by time-dependent experiments. The possible formation mechanism of YF₃ nanowires was presented in detail. Under UV excitation, 5%(mass fraction) Eu³⁺ or 5%(mass fraction) Tb³⁺ doped YF₃ samples exhibit strong red or green emission, corresponding to the characteristic lines of Eu³⁺ and Tb³⁺, respectively. Moreover, the luminescence colors of the Eu³⁺ and Tb³⁺ codoped YF₃ samples can be tuned from red, yellow and green-yellow to green by simply adjusting the relative doping concentrations of the activator ions under a single wavelength excitation, which might find potential applications in the fields of, such as, light display systems and opto- electronic devices.