Studies on orally active cephalosporin esters. II. Chemical stability of pivaloyloxymethyl esters in phosphate buffer solution

The degradation kinetics of pivaloyloxymethyl (POM) esters of cephalosporins in phosphate buffer solution (pH 6-8) were investigated. The degradation of the starting delta 3 cephalosporin ester proceeded mainly via isomerization to the delta 2 ester and subsequent hydrolysis to the delta 2 acid. Hydrolysis to the delta 3 acid (the parent acid) was very slow. Analysis of the rate constants indicated that the isomerization rate k12 was approximately equal to the apparent degradation rate of the delta 3 ester kdeg, and slower than the hydrolysis rate of the delta 2 ester k24. The isomerization process to the delta 2 ester was found to be the rate-determining step in the degradation of cephalosporin esters. The substituent at the C-3 position of the cephalosporins affected the degradation kinetics. The degradation was accelerated by increase of pH, buffer concentration and added protein.     

Studies on orally active cephalosporin esters. IV. Effect of the C-3 substituent of cephalosporin on the gastrointestinal absorption in mice

The effect of the C-3 substituent on the oral absorbability of pivaloyloxymethyl (POM) ester of cephalosporin in mice is described. The C-3 substituent affects the physicochemical and biochemical properties of POM ester, such as lipophilicity, water solubility, chemical stability and enzymatic stability. Quantitative analyses of the relationships between these properties and the oral bioavailability have been attempted. Lipophilicity made a parabolic contribution to the absorption. The optimum log P octanol/water value was estimated to be around 2.22. The chemical isomerization of the cephem double bond from delta 3 to delta 2 in the intestinal lumen prior to absorption contributed linearly to decrease of absorption. In the case of POM ester having a larger isomerization rate, more delta 2 isomer was detected in feces and urine. Enzymatic hydrolysis of POM ester to the parent acid in intestinal tissue was faster for a more lipophilic ester. Hydrolytic activity, which was detected in the content of the intestinal lumen, would lower the absorption. The effect of the C-3 substituent on water solubility was not important for the absorption of cephalosporin employed in the present study. Isomerization of the double bond, which was found to be characteristic for cephalosporin ester, presented a problem in the prodrug approach for oral use.     

Correlation of Electronic Effects in N-Alkylnicotinamides with NMR Chemical Shifts and Hydride Transfer Reactivity

The (13)C and (15)N NMR chemical shifts for ring atoms of a series of N-alkylnicotinamides are shown to be correlated with their reduction potentials and reactivities toward NaBH(3)CN. The nicotinamide compounds include N-ethyl-N-benzyl-N-[p-(trifluoromethyl)benzyl]-, N-(p-cyanobenzyl)-, N-(carbomethoxymethyl)-, and N-(cyanomethyl)nicotinamides. The values of delta()13(C) for all the ring carbons increase with increasing electron-withdrawing power of the N-alkyl substituent. The value for C-4 increases the most, a range of 2.4 ppm in this series, whereas those for other atoms increase on the order of 1 ppm. The value of delta()15(N) for N-1 decreases with increasing electron-withdrawing power over a range of 20 ppm. The NMR data indicate that inductive electron withdrawal by N-alkyl substituents polarizes the pi-electron system to decrease electron density on ring carbons and increase electron density on the ring nitrogen. The values of log k (second order) for reduction of these compounds by NaBH(3)CN are proportional to the values of delta()13(C) for C-4 and inversely proportional to delta()15(N) for N-1. The reduction potentials are proportional to delta()13(C). The substituent effects are qualitatively similar to the substrate-induced electrostatic effects on the nicotinamide ring of NAD(+) at the active site of UDP-galactose 4-epimerase (Burke, J. R.; Frey, P. A. Biochemistry 1993, 32, 13220-13230). However, they differ quantitatively in that the upfield perturbation at N-1 is smaller in the enzyme and the signal for C-6 is also shifted upfield. The substrate-induced enzymatic perturbation of electron density at C-4 of NAD(+) quantitatively accounts for its increase in reactivity at the active site, but the perturbation at N-1 is less closely correlated with reactivity.     

General base and general acid catalyzed intramolecular aminolysis of esters. Cyclization of esters of 2-aminomethylbenzoic acid to phthalimidine

Plots of log k(0) vs pH for the cyclization of trifluoroethyl and phenyl 2-aminomethylbenzoate to phthalimidine at 30 degrees C in H(2)O are linear with slopes of 1.0 at pH >3. The values of the second-order rate constants k(OH) for apparent OH(-) catalysis in the cyclization reactions are 1.7 x 10(5) and 5.7 x 10(7) M(-)(1) s(-)(1), respectively. These rate constants are 10(5)- and 10(7)-fold greater than for alkaline hydrolysis of trifluoroethyl and phenyl benzoate. The k(OH) for cyclization of the methyl ester is 7.2 x 10(3) M(-)(1) s(-)(1). Bimolecular general base catalysis occurs in the intramolecular nucleophilic reactions of the neutral species. The value of the Bronsted coefficient beta for the trifluoroethyl ester is 0.7. The rate-limiting step in the general base catalyzed reaction involves proton transfer in concert with leaving group departure. The mechanism involving rate-determining proton transfer exemplified by the methyl ester in this series (beta = 1.0) can then be considered a limiting case of the concerted mechanism. General acid catalysis of the neutral species reaction or a kinetic equivalent also occurs when the leaving group is good (pK(a) 相似文献   

Hemiortho esters and hydrotrioxides as the primary products in the low-temperature ozonation of cyclic acetals: an experimental and theoretical investigation

Low-temperature ozonation (-78 degrees C) of 1,3-dioxolanes 1a-1f and 1,3-dioxanes 1g and h in acetone-d6, methyl acetate, and tert-butyl methyl ether produced both the corresponding hemiortho esters (2a-h, ROH) and acetal hydrotrioxides (3a-h, ROOOH) in molar ratios ROH/ROOOH ranging from 0.5 to 23. Both types of intermediates were fully characterized by 1H, 13C, and 17O NMR spectroscopy. DFT calculations suggest that ozone abstracts a hydride ion from 1 to form an ion pair, R+ -OOOH, which subsequently collapses to either the corresponding hemiortho ester (ROH) or the acetal hydrotrioxide (ROOOH). Hemiortho esters decomposed quantitatively into the corresponding hydroxy esters. Experimentally obtained activation parameters for the decomposition of 2a (E(a) = 13.5 +/- 1.0 kcal/mol, log A = 8.3 +/- 1.0) are in accord with a highly oriented transition state involving, according to B3LYP calculations (deltaH(a)(298) = 13.2 kcal/mol), two molecules of water as a bifunctional catalyst. This mechanism is also supported by the magnitude of the solvent isotope effect for the decomposition of 2e, i.e., k(H2O)/k(D2O) = 4.6 +/- 1.2. Besides the hydroxy esters and oxygen (3O2/1O2), dihydrogen trioxide (HOOOH) was formed in the decomposition of most of the acetal hydrotrioxides (ROOOH) investigated. The activation parameters for the decomposition of the hydrotrioxides 3a-e in various solvents were E(a) = 20 +/- 2 kcal/mol, log A = 13.5 +/- 1.5. Several mechanistic possibilities for the decomposition of ROOOH were tested by experiment and theory. The formation of the hydroxy esters and oxygen could be explained by the intramolecular transfer of the proton to form the hydroxy ester. The assistance of water in the decomposition of ROOOH to form the hydroxy esters, either directly or via hemiortho esters, was also investigated. According to DFT calculations, the formation of a hydroxy ester via hemiortho ester is energetically more favorable (deltaH(a)(298) = 14.5 kcal/mol), again due to the catalytic effect of two water molecules. HOOOH generation requires the involvement of water in the decomposition of ROOOH where the direct formation out of ROOOH is energetically preferred. The energy for a reaction between two molecules of water and singlet oxygen (delta1O2) is too high to occur in solution.     

Investigation on the regioselectivities of intramolecular oxidation of unactivated C-H bonds by dioxiranes generated in situ

We found that dioxiranes generated in situ from ketones 1-6 and Oxone underwent intramolecular oxidation of unactivated C-H bonds at delta sites of ketones to yield tetrahydropyrans. From the trans/cis ratio of oxidation products 1a and 2a as well as the retention of the configuration at the delta site of ketone 5, we proposed that the oxidation reaction proceeds through a concerted pathway under a spiro transition state. The intramolecular oxidation of ketone 6 showed the preference for a tertiary delta C-H bond over a secondary one. This intramolecular oxidation method can be extended to the oxidation of the tertiary gamma' C-H bond of ketones 9 and 10. For ketone 11 with two delta C-H bonds and one gamma' C-H bond linked respectively by a sp(3) hydrocarbon tether and a sp(2) ester tether, the oxidation took place exclusively at the delta C-H bonds. Finally, by introducing proper tethers, regioselective hydroxylation of steroid ketones 12-14 have been achieved at the C-17, C-16, C-3, and C-5 positions.     

Stable enols of carboxylic esters. The poly(methoxycarbonyl)cyclopentadiene systems

The structures of the poly(methoxycarbonyl)cyclopentadienes C(5)H(6)(-)(n)()(CO(2)Me)(n)(), n = 5 (Cp-5), n = 4 (Cp-4), n = 3 (1, 2,4-; Cp-3) and n = 2 (1,2-; 1,2-Cp-2-I) were investigated. The X-ray diffractions of Cp-5 (known), Cp-4, and Cp-3 showed an enol of ester structure in the solid state. The enolic hydrogen forms a symmetrical hydrogen bond to a neighboring ester carbonyl, so that the vicinal "enolic" CO(2)Me groups in the 1, 2-C(=CO(2)Me)-C(CO(2)Me)(4) moiety are identical. The relevant X-ray parameters for the three enols are similar. The CP-MAS spectra of Cp-3-Cp-5 generally resemble their (13)C NMR spectra in CDCl(3) except for some differences of mostly <1 ppm. The (1)H, (13)C, and (17)O NMR spectra of Cp-3-Cp-5 in CDCl(3) are consistent with those of the hydrogen bonded enols. Most characteristic are the (1)H and (17)O signals of the OH groups at 19.7-20.1 and 221-225 ppm, respectively. Proton addition to sodium 1, 2-bis(methoxycarbonyl)cyclopentadienide gave a mixture of four 1, 2-bis(methoxycarbonyl)cyclopentadienes. The isomer (1,2-Cp-2-I) formed in 10-20% displays delta(O(1)H) at 19.3 ppm and is the enol analogue of Cp-5 whereas its main isomer (30-55%) (1,2-Cp-2-IV) has the ester structure. In CD(3)CN and DMSO-d(6) only one signal was observed at room temperature for each type of H, C, or O of Cp-5, suggesting a complete ionization to the symmetrical anion of Cp-5. In contrast, Cp-4 and Cp-3 in CD(3)CN at room temperature display OH signals in both (1)H and (17)O NMR spectra, and Cp-5 shows a broad OH signal in the (1)H spectrum at 240 K. The enol of ester structure is the main species, although exchange with the corresponding anion is possible. On standing in DMF-d(7) at room temperature, new signals are observed for Cp-3 and Cp-4. On raising the temperature in Cl(2)CDCDCl(2), Cp-3-Cp-5 show line broadening and appearance of new signals. These were ascribed to rearrangment and decomposition processes.     

Heteropolynuclear palladium complexes with pyrazolate and its 3-tert-butyl derivatives: the effect of heterometal ions on the rate of isomerization

The heteropolynuclear complexes [Pd(2)M'(2)(mu-pz)(6)] (M'=Ag (1), Au (2); pzH=pyrazole), HT-[Pd(2)M'(2)(mu-3-tBupz)(6)] (M'=Ag (3 a), Au (4 a); 3-tBupzH=3-tert-butylpyrazole), and HH-[Pd(2)Au(2)(mu-3-tBupz)(6)] (4 b) have been prepared and some of them were structurally characterized. When 3-tert-butylpyrazolate was employed as a bridging ligand, two linkage isomers (head-to-tail (HT) and head-to-head (HH)) arise from the difference in orientation of the substituent groups on the pyrazolate bridges between the two Pd atoms. (1)H NMR spectroscopy has been used to identify and to follow the reversible stereochemical rearrangement of the HH isomer of [Pd(2)Ag(2)(mu-3-tBupz)(6)] (3 b) to form the HT isomer 3 a in CDCl(3) and the HT isomer of [Pd(2)Au(2)(mu-3-tBupz)(6)] (4 a) to form the HH isomer 4 b in C(6)D(6). Kinetic studies of the reaction have established the rate law to be -d(HH)/dt=d(HT)/dt=k(2)[HH]-k(1)[HT] for 3 b and -d(HT)/dt=d(HH)/dt=k(1)[HT]-k(2)[HH] for 4 a, where k(1) and k(2) denote the rate of isomerization from the HT to the HH isomer and that from the HH to the HT isomer, respectively. For typical runs at 50 degrees C in C(6)D(6), k(1)=13.8x10(-5) s(-1), k(2)=18.6x10(-5) s(-1), and K(eq)=k(2)/k(1)=1.24 for 3 b, and k(1)=1.26x10(-5) s(-1), k(2)=3.52x10(-5) s(-1), and K(eq)=k(1)/k(2)=0.36 for 4 a. Temperature-dependent rate measurements reveal DeltaH(not equal) and DeltaS(not equal) to be 100(1) kJ mol(-1) and 0(3) J mol(-1) K(-1) for 3 b and 112(5) kJ mol(-1) and 20(17) J mol(-1) K(-1) for 4 a, respectively. The rate of isomerization is essentially unaffected by the concentration of the complex or by the presence of neutral bridging ligands. These data and observations imply that the isomerization involves an intramolecular exchange process.     

Beyond the Roger Brown rearrangement: long-range atom topomerization in conjugated polyynes

Long-range carbon atom topomerization in a 1,3-diyne has been demonstrated for the first time. 1-Phenyl-4-p-tolyl-1,3-butadiyne, (13)C-enriched at C-1, was synthesized and subjected to flash vacuum pyrolysis. At 800 degrees C and 0.01 Torr, this resulted in nearly complete (13)C label equilibration between C-1 and C-2, as seen by NMR analysis. Pyrolysis at 900 degrees C further led to ca. 35% of the label migrating about equally to C-3 and C-4. These results demonstrate that both intrabond and interbond atom exchange processes are operative, with the former having a lower activation barrier. DFT and Moller-Plesset calculations support a mechanism that passes through Brown rearrangement (1,2-shift), closure to trialene (bicyclo[1.1.0]-1,3-butadiene), bond-shift isomerization to exchange C-2 and C-3, and ring opening. The resulting vinylidene can rearrange to a butadiyne with the isotopic label at C-3 or C-4. Consistent with earlier calculations, trialene is predicted to have alternating peripheral bonds, with a weak central sigma bond and significant diradical character. Trialene is predicted [(B3LYP/6-311+G(2d,p)] to lie 64.6 kcal/mol above butadiyne, with barriers of 2.2 and 4.4 kcal/mol, respectively, for ring opening or bond-shift isomerization. Other potential rearrangement mechanisms which pass through tetrahedrene (E(rel) = 167.2 kcal/mol) or 1,2,3-cyclobutatriene (E(rel) = 161.1 kcal/mol) lie at much higher energies.     

Stable simple enols. Self-catalyzed E/Z-isomerization of the sterically crowded 2-(m-methoxymesityl)-1,2-dimesitylethenol

(E)-2-(m-methoxymesityl)-1,2-dimesitylethenol (3a) isomerizes in the absence of a catalyst in solution to a 1.0:0.9 E/Z (3a/3b) equilibrium mixture. In CDCl3 the isomerization is first order in 3a within a run, but the plot of the rate constant k(obs) vs the changing [3a]0 in different runs is a half-parabola, indicating self-catalysis by more than one enol molecule. At 0.09 M enol, the isotope effect k(3a)/k(3a)-OD = 2.1. In the presence of 0.025-0.25 M pyridine-d5, the k(obs) vs [pyridine-d5] plot displays a bell-shaped profile. The change in the shape of the OH signals of the 3a/3b mixture at 295-430 K in C6D5NO2 was followed by DNMR. The four signals of the diastereomeric 3a/3b mixture observed at 330 K coalesce at 350 K with barriers of 18.3 and 18.4 kcal x mol(-1) due to the diastereomerization of the vinyl propellers. The resulting two signals observed at >360 K further coalesce at 425 K with a barrier of 22.9 kcal x mol(-1) due either to oxygen-to-oxygen proton exchange or to E/Z isomerization. The estimated upper limit for the rate of proton exchange of k(ex) < or = (2-4) x 10(3) M(-1) x s(-1) at 425 K between the enol molecules is sufficiently slow to be a rate-controlling step in the isomerization. A process in which several enol molecules catalyze the isomerization is suggested, and several mechanistic routes are analyzed.     

Mechanistic studies of the cycloisomerization of dimethyl diallylmalonate catalyzed by a cationic palladium phenanthroline complex.

The mechanism of the cycloisomerization of dimethyl diallylmalonate (1) catalyzed by the cationic palladium phenanthroline complex [(phen)Pd(Me)CNCH(3)](+)[BAr(4)](-) [Ar = 3,5-C(6)H(3)(CF(3))(2)] (2) has been investigated. Heating a solution of 1 and 2 (5 mol %) in DCE at 40 degrees C led to zero-order decay of 1 to approximately 80% conversion (k(obs) = (7.1 +/- 0.3) x 10(-7) M s(-1)) with formation of a 27:2.2:1.0 mixture of 3,3-bis(carbomethoxy)-1,5-dimethylcyclopentene (3), 4,4-bis(carbomethoxy)-1,2-dimethylcyclopentene (4), and 1,1-bis(carbomethoxy)-4-methyl-3-methylenecyclopentane (5) and traces ( approximately 3.5%) of ethyl-substituted carbocycles 6 of the chemical formula C(12)H(18)O(4). Cyclopentenes 3 and 4 were formed both kinetically (3:4 = 30:1 at 40 degrees C) and via secondary isomerization of 5 (3:4 = 1:2.5 at 40 degrees C); the kinetic pathway accounted for the 93% of cyclopentene formation at 40 degrees C. Carbocycles 6 were formed predominantly (> or =90%) within the first two catalyst turnovers as byproducts of catalyst activation. Stoichiometric reaction of 1 and 2 at room temperature for 1.5 h led to the isolation of the palladium cyclopentyl chelate complex [carbohydrate structure-see text] in 26% yield as a approximately 2:1 mixture of isomers. The structure of trans,trans-7 was determined by X-ray crystallography. Kinetic studies of the formation of 7 established the rate law: rate = k[1][2], where k = (2.1 +/- 0.3) x 10(-2) M(-1) s(-1) (Delta G(*)(298K) = 19.7 +/- 0.1 kcal mol(-1)) at 25 degrees C. Thermolysis of 7 at 50 degrees C formed carbocycles 6 in 65% yield by GC analysis. (1)H and (13)C NMR analysis of an active catalyst system generated from 1 and a catalytic amount of 2 led to the identification of the cyclopentyl chelate complex [carbohydrate structure-see text] as the catalyst resting state. Cycloisomerization of 1-2,6-d(2) formed predominantly (approximately 90%) 3,3-bis(carbomethoxy)-5-deuterio-1-(deuteriomethyl)-5-methylcyclopentene (3-d(2)); no significant (< or =10%) kinetic isotope effect or intermolecular H/D exchange was observed. Cycloisomerization of 1-3,3,5,5-d(4) formed a 1:2.6 mixture of 3,3-bis(carbomethoxy)-2,4,4-trideuterio-1,5-dimethylcyclopentene (3-d(3)) and 3,3-bis(carbomethoxy)-2,4,4-trideuterio-5-(deuteriomethyl)-1-methylcyclo pentene (3-d(4)); while no significant (< or =10%) kinetic isotope effect was detected, extensive intermolecular H/D exchange was observed. These data are consistent with a mechanism involving hydrometalation of an olefin of 1, intramolecular carbometalation, isomerization via reversible beta-hydride elimination/addition, and turnover-limiting displacement of the cyclopentenes from palladium.     

Synthesis and decomposition of an ester derivative of the procarcinogen and promutagen, PhIP, 2-amino-1-methyl-6-phenyl-1H-imidazo[4,5-b]pyridine: unusual nitrenium ion chemistry

The food-derived heterocyclic amine (HCA) carcinogen 2-amino-1-methyl-6-phenyl-1H-imidazo[4,5-b]pyridine, PhIP, is often generated in the highest concentration of the HCAs formed during broiling and frying of meat and fish. Although it is considered to be an important contributor to human cancer risk from exposure to HCAs, the chemistry of PhIP metabolites that presumably react with DNA to initiate carcinogenesis has received only cursory attention. We have synthesized the ester derivative N-pivaloxy-2-amino-1-methyl-6-phenyl-1H-imidazo[4,5-b]pyridine, 1b, and investigated its chemistry in aqueous solution. Although 1b was too unstable to isolate, we could characterize it by NMR methods in DMF-d7, a solvent in which it is stable at -40 degrees C. It decomposed rapidly in aqueous solution, but its conjugate acid, 1bH+, is not reactive. The nitrenium ion, 2, was trapped by N(3)(-) to form the unusual tetrazole adduct, 16. In the absence of N3-, the expected hydration products of 2 were not detected, but the reduction product, 12, was detected. Although such products are often taken as evidence of triplet nitrenium ions, the efficient trapping of 2 by N(3)(-) indicates that it is a ground state singlet species. The product 12 appears to be generated by reduction of an initially formed hydration product of 2. An alternative addition-elimination mechanism for the formation of 12 does not fit the available kinetic data. The selectivity of 2, measured as kaz/ks, the ratio of the second-order rate constant for its reaction with N(3)(-) and the first-order rate constant for its reaction with the aqueous solvent, is (2.3 +/- 0.6) x 10(4) M(-1), a value that is in the middle of the range of k(az)/k(s) of 10-10(6) M(-1) observed for nitrenium ions derived from other HCAs. The mutagenicity of aromatic amines (AAs) and HCAs, measured as the log of histidine revertants per nanomole of amine, log m, in Salmonella typhimurium TA 98 and TA 100 correlates with log(k(az)/k(s)) for a wide variety of carbocyclic and heterocyclic amine mutagens including PhIP. Previously developed linear regression models for mutagenicity that include log(k(az)/k(s)) as an independent variable predict log m for PhIP with good accuracy in both TA 98 and TA 100. Quantitative carcinogenicity data are less strongly correlated with log(k(az)/k(s)), so prediction of the carcinogenicity of PhIP and other HCAs or AAs based primarily on log(k(az)/k(s)) is less successful.     

Metalation of Biginelli compounds. A general unprecedented route to C-6 functionalized 4-aryl-3,4-dihydropyrimidinones

4-Aryl-6-methyl-3,4-dihydro-2(1H)-pyrimidinone esters (DHPMs) readily undergo metalation at the C-6 methyl (vinylogous ester) position on treatment with lithium diisopropylamide at -10 degrees C. The resulting anion intermediates can be treated with electrophilic reagents to afford functionalized DHPMs that have been chemically elaborated mainly at the C-6 position. Di- and trianion formation is also possible at both the vinylogous methyl and NH positions when reactions are performed with excess equivalents of the base.     

N,N'-Diisopropyl-O-Diphenylmethyl Isourea: A Mild and Convenient Alkylating Agent for the Formation of Cephalosporin Derivatives

N,N-Diisopropyl-O-diphenylmethyl isourea reacts with cephalosporin-4-carboxylic acid in tetrahydrofuran at room temperature to give the diphenylmethyl (DPM) ester in good yields without isomerization of the double bond from C-3 to C-2.     

Reversed phase high performance liquid chromatographic separation of hydroxy steroidal unsaturated esters and their hemisuccinates.

The high performance liquid chromatographic (HPLC) separation and identification of 12 isomeric and/or highly chemically related steroids with an unsaturated ester moiety at position 17 beta has been achieved. The main stereochemical features of the steroid skeleton cover 3 alpha/beta, 5 alpha/beta or delta, and 20 E/Z, bearing the alcohol or hemisuccinate group at the 3 position. The isocratic reversed phase C18 HPLC separation employed ethanol, methanol and its mixtures with water or 0.01 M phosphoric acid as the mobile phase. The best separation of the respective alcohols from their hemisuccinates has been achieved with 20% of aqueous phase content. The best separation among isomeric or related steroids has been achieved with methanol:water 8:2 and 85:15 and similar systems containing phosphoric acid.     

Photochemical investigation of Roussin's red salt esters: Fe2(mu-SR)2(NO)4

The photochemistry of various Roussin's red ester compounds of the general formula Fe(2)(SR)(2)(NO)(4), where R = CH(3), CH(2)CH(3), CH(2)C(6)H(5), CH(2)CH(2)OH, and CH(2)CH(2)SO(3)(-), were investigated. Continuous photolyses of these ester compounds in aerated solutions led to the release of NO with moderate quantum yields for the photodecomposition of the ester (Phi(RSE) = 0.02-0.13). Electrochemical studies using an NO electrode demonstrated that 4 mol of NO are generated for each mole of ester undergoing photodecomposition. Nanosecond flash photolysis studies of Fe(2)(SR)(2)(NO)(4) (where R = CH(2)CH(2)OH and CH(2)CH(2)SO(3)(-)) indicate that the initial photoreaction is the reversible dissociation of NO. In the absence of oxygen, the presumed intermediate, Fe(2)(SR)(2)(NO)(3), undergoes second-order reaction with NO to regenerate the parent cluster with a rate constant of k(NO) = 1.1 x 10(9) M(-1) s(-1) for R = CH(2)CH(2)OH. Under aerated conditions the intermediate reacts with oxygen to give permanent photochemistry.     

Isomerisierung von Methoxy- und Carbomethoxysubstituierten Cycloalkyl- und Alken-radikalkationen

The very complex isomerization patterns of methoxy and carbomethoxy substituted cycloalkanes (3- to 7-membered rings) have been investigated using collisional activation, metastable ion characteristics and field ionization kinetics. The extent of isomerization depends on both the ring size and the substituent. Irrespective of the electronic properties of the substituent, ring opening involves exclusively the C-1? C-2 bond whereby linear alkene radical cations are formed. In the case of OCH₃- and COOCH₃ substituents the position of the resulting double bond (terminal or α,β-unsaturated) is determined more by the ring size of the precursor molecules and less by the electronic properties of the substituents. Contrary to these findings alklyl substituted cycloalkanes (3- to 5-membered rings) rearrange exclusively to terminal alkene radical cations. The barrier for double bond isomerization seems to be substantially influenced by substituents.     

Kinetic isotope effects in cycloreversion of rhenium (V) diolates

Cycloreversion of 4-methoxystyrene from the corresponding Tp'Re(O)(diolato) complex (Tp' = hydrido-tris-(3,5-dimethylpyrazolyl)borate) was measured competitively for various isotopomers at 103 degrees C. Primary ((12)C/(13)C) and secondary ((1)H/(2)H) kinetic isotope effects were determined. The primary KIEs were k(12C)/k(13C) = 1.041 +/- 0.005 at the alpha position and 1.013 +/- 0.006 at the beta position. Secondary KIEs were k(H)/k(D) = 1.076 +/- 0.005 at the alpha position and 1.017 +/- 0.005 at the beta position. Computational modeling (B3LYP/LACVP+) located a transition state for concerted cycloreversion of styrene from TpRe(O)(OCH(2)CHPh) exhibiting dramatically different C-O bond lengths. A Hammett study on cycloreversions of substituted styrenes from a series of Tp'Re(O)(diolato) showed dichotomous behavior for electron donors and electron-withdrawing groups as substituents: rho = -0.65 for electron donors, but rho = +1.13 for electron-withdrawing groups. The data are considered in light of various mechanistic proposals. While the extrusion of 4-methoxystyrene is concluded to be a highly asynchronous concerted reaction, the Hammett study reflects a likelihood that multiple reaction mechanisms are involved.     

Oxidation of iodide by a series of Fe(III) complexes in acetonitrile

The oxidations of iodide by [Fe(III)(bpy)2(CN)2]NO3, [Fe(III)(dmbpy)2(CN)2]NO3, [Fe(III)(CH3Cp)2]PF6, and [Fe(III)(5-Cl-phen)2(CN)2]NO3 at 25 degrees C, ionic strength of 0.10 M in acetonitrile, are catalyzed by trace levels of copper ions. This copper catalysis can be effectively masked with the addition of 5.0 mM 2,2'-bipyridine (bpy), which permits the rate law of the direct reactions to be determined: -d[Fe(III)]/dt = 2(k1[I-] + k2[I-]2)[Fe(III)]. According to 1H NMR and UV-vis spectra, the products of the reaction are I3- and the corresponding Fe(II) complexes, with the stoichiometric ratio (delta[I3-]/delta[Fe(II)]) of 1:2. Linear free-energy relationships (LFERs) are obtained for both log k1 and log k2 vs E(1/2) with slopes of 16.1 and 13.3 V(-1), respectively. A mechanism is inferred in which k1 corresponds to simple electron transfer to form I* plus Fe(II), while k2 leads directly to I2(-*). From the mild kinetic inhibition of the k1 path by [Fe(II)(bpy)2(CN)2] the standard potential (Eo) of I*/I- is derived: Eo = 0.60 +/- 0.01 V (vs [Fe(Cp)2](+/0)).