Dense passivating poly(ethylene glycol) films on indium tin oxide substrates

We describe the formation and characterization of surface-passivating poly(ethylene glycol) (PEG) films on indium tin oxide (ITO) glass substrates. PEG chains with a molecular weight of 2000 and 5000 D were covalently attached to the substrates in a systematic approach using different coupling schemes. The coupling strategies included the direct grafting with PEG-silane, PEG-methacrylate, and PEG-bis(amine), as well as the two-step functionalization with aldehyde-bearing silane films and subsequent coupling with PEG-bis(amine). Elemental analysis by X-ray photoelectron spectroscopy (XPS) confirmed the successful surface modification, and XPS and ellipsometry provided values for film thicknesses. XPS and ellipsometry thickness values were almost identical for PEG-silane films but differed by up to 400% for the other PEG layers, suggesting a homogeneous layer for PEG-silane but an inhomogeneous distribution for other PEG coatings on the molecularly rough ITO substrates. Atomic force microscopy (AFM) and water contact angle goniometry confirmed the different degrees of surface homogeneity of the polymer films, with PEG-silane reducing the AFM rms surface roughness by 50% and the water contact angle hysteresis by 75% compared to uncoated ITO. The ability of the PEG layers to passivate the substrate against the nonspecific adsorption of biopolymers was tested using fluorescence-labeled immunoglobulin G and DNA oligonucleotides in combination with fluorescence microscopy. The results indicate a positive relationship between film density and homogeneity on one hand and the ability to passivate against biopolymer adhesion on the other hand. The most homogeneous layers prepared with PEG-silane reduced the nonspecific adsorption of fluorescence-labeled DNA by a factor of 300 compared to uncoated ITO. In addition, the study finds that the ratio of film thicknesses derived by ellipsometry and XPS is a useful parameter to quantify the structural integrity of PEG layers on molecularly rough ITO surfaces. The findings may be applied to characterize PEG or other polymeric films on similarly coarse substrates.     

Catch and release cell sorting: electrochemical desorption of T-cells from antibody-modified microelectrodes

The development of integrated microsystems capable of interrogation, characterization and sorting of mammalian cells is highly significant for further advancement of point-of-care diagnostics and drug discovery fields. The present study sought to design a novel strategy for releasing antibody-bound cells through electrochemical disruption of the underlying antibody (Ab) layer. A microsystem for selective capture and release of cells consisted of an array of individually addressable gold microelectrodes fabricated on a glass substrate. Poly(ethylene glycol) (PEG) hydrogel photolithography was employed to make the glass regions non-fouling, thus, ensuring selective localization of proteins and cells on the microelectrodes. The gold surfaces were decorated with anti-CD4 Ab molecules using standard alkanethiol self-assembly and carbodiimide coupling approaches. The Ab-functionalized electrodes selectively captured model T-lymphocytes (Molt-3 cells) expressing CD4 antigen while minimal cell adhesion was observed on PEG hydrogel-modified glass substrates. Importantly, application of a reductive potential (-1.2V vs. Ag/AgCl reference electrode) resulted in release of surface-bound T-cells from the electrode surface. Cyclic voltammetry and fluorescence microscopy were employed to verify that the detachment of captured T-cells was indeed due to the electrochemical disruption of the underlying alkanethiol-Ab layer. In the future, the cell sorting approach described here may be combined with microfluidic delivery to enable Ab-mediated capture of T-lymphocytes or other cell types followed by release of select cells for downstream gene expression studies or re-cultivation.     

Nafion基氧化还原聚合物在空气中的电荷传输性能

利用三明治电池和伏安法测试了不同制备条件的Nafion基氧化还原聚合物膜在空气中的电荷传输性能. 研究结果表明, 混合适量聚乙二醇(PEG)的Nafion基金属联吡啶配合物{Nafion[M(bpy)2+3, PEG](M=Ru, Fe)}膜的表观电荷传递扩散系数(Dct)达到10-6-10-7 cm2·s-1 , 电子或空穴迁移率(μ)达到10-4-10-5 cm2·V-1·s-1. 在导电玻璃(ITO)电极与Nafion基氧化还原聚合物膜界面引入一层导电聚苯胺(PANI)后, 降低了其接触电阻, 使氧化还原聚合物膜的Dct提高至10-5-10-6 cm2·s-1, μ提高至10-3-10-4 cm2·V-1·s-1, 且工作电流提高了近两个数量级. 该固态氧化还原聚合物膜的性能比较稳定, 在空气中放置30天后其Dct和μ降低得很少.     

Influence of the substrate type on the microstructural,optical and electrical properties of sol–gel ITO films

Indium tin oxide (ITO) is recognized as the best transparent and conductive material [transparent conducting oxide (TCO)] until now and its properties are dependent on the preparation method. In the present work ITO films with In:Sn atomic ratio 9:1 were prepared by a sol–gel route on different substrates (microscope glass slides, microscope glass covered with one layer of SiO₂ and Si wafers) for TCO applications. The multilayer ITO films were obtained by successive deposition by the dip-coating method and the films were characterized from the structural, morphological, optical, and electrical points of view using X-ray diffraction, scanning electron microscopy, atomic force microscopy, spectroscopic ellipsometry and by Hall effect measurements, respectively. The results showed that the thickness, optical constants and carrier numbers depend strongly on the type of substrate, number of deposited layers and sol concentration. The optical properties of ITO films are closely related to their electrical properties. The enhancement of the conductivity was possible with the increase of crystallite size (which occurred after thermal treatment) and with the reduction of surface roughness.     

Facile construction of sulfanyl-terminated poly(ethylene glycol)-brushed layer on a gold surface for protein immobilization by the combined use of sulfanyl-ended telechelic and semitelechelic poly(ethylene glycol)s

A sulfanyl-terminated poly(ethylene glycol) (PEG)-brushed layer was constructed on a gold sensor platform by consecutive treatment with a sulfanyl-ended semitelechelic PEG (2 kDa, hereafter "MeO-PEG-SH (2k)") and a sulfanyl-ended telechelic PEG (5 kDa, hereafter "SH-PEG-SH (5k)"). Our strategy of constructing the sulfanyl-terminated PEG-brushed gold surface is based on mixed-PEG-brush formation from the longer SH-PEG-SH (5k) and the shorter MeO-PEG-SH (2k), where the preimmobilized shorter MeO-PEG-SH (2k) prevents loop formation in the longer SH-PEG-SH (5k) on the surface and the free sulfanyl group at one end of the longer SH-PEG-SH is exposed to the mixed-PEG tethered-chain surface. From the experimental results obtained from surface plasmon resonance analysis, it became apparent that the immobilization density and the orientation of the longer SH-PEG-SH (5k) on the gold surface could be controlled by the amount of preimmobilized shorter MeO-PEG-SH (2k). Under the optimized conditions of MeO-PEG-SH (2k) premodification, the constructed MeO-PEG-SH (2k)/SH-PEG-SH (5k) mixed layer conjugated efficiently with the maleimide-installed proteins and the antibody Fab' fragments, accompanied by an appreciable nonfouling characteristic against bovine serum albumin as strong as that of the MeO-PEG-SH (5k)/MeO-PEG-SH (2k) mixed surface, which was reported in our previous work; it also showed a superior nonfouling characteristic compared to the commercially available carboxymethylated dextran surface (Uchida, K.; et al. Biointerphase 2007, 2 (4), 126-130). Furthermore, from the experimental results of the X-ray photoelectron spectrometry analysis, the presence of both Au-bound and Au-unbound sulfur species was confirmed on the SH-PEG-SH (5k)/MeO-PEG-SH (2k)-modified gold surface. These results clearly indicate that the preimmobilized shorter MeO-PEG-SH (2k) not only increased the nonfouling characteristic of the PEG tethered-chain surface but also prevented loop formation in the longer SH-PEG-SH (5k) on the gold surface. Since the protein-installed SH-PEG-SH (5k)/MeO-PEG-SH (2k)-modified surface showed a strongly nonfouling characteristic and recognized the target molecules selectively, this new mixed-brush-formation technique using longer sulfanyl-ended telechelic PEGs and shorter semitelechelic PEGs is a simple yet effective method of constructing a strongly nonfouling terminal-functionalized gold surface for protein immobilization.     

Enhanced electrochemical activity of redox-labels in multi-layered protein films on indium tin oxide nanoparticle-based electrode

Facile electrical communication between redox-active labeling molecules and electrode is essential in the electrochemical detection of bio-affinity reactions. In this report, nanometer-sized indium tin oxide (ITO) particles were employed in the fabrication of porous thick film electrodes to enhance the otherwise impeded electrochemical activity of redox labels in multi-layered protein films, and to enable quantitative detection of avidin/biotin binding interaction. To carry out the affinity reaction, avidin immobilized on an ITO electrode was reacted with mouse IgG labeled with both biotin and ruthenium Tris-(2,2′-bipyridine) (Ru-bipy). The binding reaction between avidin and biotin was detected by the catalytic voltammetry of Ru-bipy in an oxalate-containing electrolyte. On sputtered ITO thin film electrode, although a single layer of Ru-bipy labeled avidin exhibited substantial anodic current, attaching the label to the outer IgG layer of the avidin/biotin-IgG binding pair resulted in almost complete loss of the signal. However, electrochemical current was recovered on ITO film electrodes prepared from nanometer-sized particles. The surface of the nanoparticle structured electrode was found by scanning electron microscopy to be very porous, and had twice as much surface binding capacity for avidin as the sputtered electrode. The results were rationalized by the assumption of different packing density of avidin inner layer on the two surfaces, and consequently different electron transfer distance between the electrode and Ru-bipy on the IgG outer layer. A linear relationship between electrochemical current and IgG concentration was obtained in the range of 40-4000 nmol L⁻¹ on the nanoparticle-based electrode. The approach can be employed in the electrochemical detection of immunoassays using non-enzymatic redox labels.     

Electron transfer of heme proteins on the ITO electrode in polymer solvents

The redox reaction of poly(ethylene oxide) (PEO)-modified hemoglobin (PEO–Hb) was analyzed in PEO oligomers with cyclic voltammetry. The PEO–Hb was made soluble in PEO with molecular weight of 200 (PEO₂₀₀) containing 0.5 M KCI. Quasi-reversible redox signals of PEO–Hb were obtained by using an indium tin oxide (ITO) glass working electrode. PEO–Hb, cast on the ITO electrode, also showed the redox response in PEO with molecular weight of 400 (PEO₄₀₀). The peak current of PEO–Hb on the ITO electrode gradually increased during potential cycling. The effect of the scan rate on the quantity of electricity (Q) was analyzed after the peak current reached a constant value. The constant Q value was observed at the scan rate ranging from 30 to 500 mV/sec. The number of reactive PEO–Hb molecules was estimated from this constant Q-value. It was suggested that the electron transfer was carried out at the first layer of the PEO–Hb which was in direct contact with the ITO electrode. The quantity of electricity of PEO–Hb increased when the ITO electrode was first washed in an aqueous medium with ultrasonicator. This strongly suggested that the more effective surface area of the ITO electrode turned to be covered with PEO–Hb when the microporous region of the ITO particles was more hydrated.     

溶菌酶在裸金电极和疏基乙酸或正十二疏烷基醇修饰电极上的吸附

电化学石英晶体阻抗系统;疏基乙酸;溶菌酶在裸金电极和疏基乙酸或正十二疏烷基醇修饰电极上的吸附     

A novel ferroceneylazobenzene self-assembled monolayer on an ITO electrode: photochemical and electrochemical behaviors

A novel ferroceneylazobenzene self-assembled monolayer (SAM) has been constructed on an indium-tin oxide (ITO) electrode via the covalent attachment of 4-(4'-11-ferrocenyl-undecanoxyphenylazo)benzoic acid ( FcAzCOOH) onto a silanized ITO substrate surface and verified by reflectance infrared spectroscopy and water contact angle. Atomic force microscopy (AFM) and cyclic voltammogram (CV) indicated that the FcAzCOOH formed a uniform and reproducible SAM on the ITO electrode with a surface coverage of ca. 1.9 x 10 (-10) mol/cm (2) (87 A (2)/molecule). The reversible photoisomerization behavior of the SAM was characterized by UV-vis spectra. The azo pi-pi* transition band intensity of the SAM gradually decreased with UV (365 nm) irradiation and was almost recovered again when subsequent exposure to ambient room light (400-800 nm). The increased tilt angle of the molecules on the ITO substrate after UV irradiation further confirmed the trans-to- cis isomerization of azobenzene moieties. The CV of the trans- FcAzCOOH modified ITO electrode showed a pair of waves due to redox of the ferrocene groups in the potential range of 0 to +800 mV (vs SCE), and the peak separation of the redox wave became larger after UV irradiation and almost returned to its original value after subsequent exposure to the visible light. Rate-dependent CV curves indicated that the charge transfer rate between the ferrocene species in the SAM and the ITO electrode was slowed down after UV irradiation due to the smaller porosity of the monolayer film and the more compact barrier layer between the redox species and the ITO electrode. It is the first time to directly observe the influence of photoisomerization of the azobenzene moiety on the redox behavior of redox species in the ferroceneylazobenzene-functionalized SAM. The present results provide profound insight into the role of redox microenvironment on electron transfer kinetics and also provide a simple and facile approach to the preparation of photocontrollable electrodes.     

Integrated Antimicrobial and Nonfouling Zwitterionic Polymers

Zwitterionic polymers are generally viewed as a new class of nonfouling materials. Unlike their poly(ethylene glycol) (PEG) counterparts, zwitterionic polymers have a broader chemical diversity and greater freedom for molecular design. In this Minireview, we highlight recent microbiological applications of zwitterionic polymers and their derivatives, with an emphasis on several unique molecular strategies to integrate antimicrobial and nonfouling properties. We will also discuss our insights into the bacterial nonfouling performance of zwitterionic polymers and one example of engineering zwitterionic polymer derivatives for antimicrobial wound‐dressing applications.     

铕离子在乙二醇低聚物中的配合作用与电化学行为

研究了乙二醇低聚物（ＰＥＧ）与Ｅｕ（２＋）及Ｅｕ（３＋）所形成配合物的结构，荧光性质和电化学行为．Ｅｕ（３＋）的配合物是由ＥｕＣｌ３溶于具有不同摩尔质量的ＰＥＧ而成的．它们在３９４ｎｍ和６１４ｎｍ处分别有很强的激发和发射光谱峰，并且这两峰的强度随着ＰＥＧ的摩尔质量的增大而加强．Ｅｕ（２＋）的配合物是通过用涂布有氧化铟及氧化锡的玻璃板作为工作电极，在氮气气氛下，加－２Ｖ（ｖｓＡｇ）电压还原ＥｕＣｌ３的ＰＥＧ溶液来制备的．它们的荧光性质和１８—Ｃ—６冠醚与Ｅｕ（２＋）所形成配合物的性质非常接近，从而表明ＰＥＧ的化学环境与大环聚醚配体的很相似．进一步的红外与荧光谱实验结果表明：铕离子不但与聚乙二醇的末端－ＯＨ基团结合，而且亦能与链中间的氧原子作用．随着聚合物分子量的增大，铕离子的点对称性不断下降．Ｅｕ（３＋）在聚合物中的氧化还原很不可逆．添加支持盐对其电化学行为有很大影响．     

Protein adhesion on silicon-supported hyperbranched poly(ethylene glycol) and poly(allylamine) thin films

Hyperbranching poly(allylamine) (PAAm) and poly(ethylene glycol) (PEG) on silicon and its effect on protein adhesion was investigated. Hyperbranching involves sequential grafting of polymers on a surface with one of the components having multiple reactive sites. In this research, PAAm provided multiple amines for grafting PEG diacrylate. Current methodologies for generating PEG surfaces include PEG-silane monolayers or polymerized PEG networks. Hyperbranching combines the nanoscale thickness of monolayers with the surface coverage afforded by polymerization. A multistep approach was used to generate the silicon-supported hyperbranched polymers. The silicon wafer surface was initially modified with a vinyl silane followed by oxidation of the terminal vinyl group to present an acid function. Carbodiimide activation of the surface carboxyl group allowed for coupling to PAAm amines to form the first polymer layer. The polymers were hyperbranched by grafting alternating PEG and PAAm layers to the surface using Michael addition chemistry. The alternating polymers were grafted up to six total layers. The substrates remained hydrophilic after each modification. Static contact angles for PAAm (32-44 degrees) and PEG (33-37 degrees) were characteristic of the corresponding individual polymer (30-50 degrees for allylamine, 34-42 degrees for PEG). Roughness values varied from approximately 1 to 8 nm, but had no apparent affect on protein adhesion. Modifications terminating with a PEG layer reduced bovine serum albumin adhesion to the surface by approximately 80% as determined by ELISA and radiolabel binding studies. The hyperbranched PAAm and PEG surfaces described in this paper are nanometer-scale, multilayer films capable of reducing protein adhesion.     

薄层法研究十二烷基苯磺酸钠对硝基苯/水界面电子转移的影响

用薄层法研究了阴离子表面活性剂十二烷基苯磺酸钠(SDBS)对硝基苯/水界面电子转移的影响. 实验结果表明, 随着水相中十二烷基苯磺酸钠浓度的增加, 有机相中十甲基二茂铁(DMFc)和水相中Fe(CN)₆^3-发生的界面双分子反应的阴极平台电流呈现递减趋势, 但是界面双分子反应速率常数却呈递增趋势. 这是由于阴离子表面活性剂十二烷基苯磺酸钠在硝基苯/水界面形成了修饰层, 影响了界面双电层结构. SDBS在液/液界面的吸附为Langmuir吸附.     

Elucidation of the mechanism of redox grafting of diazotated anthraquinone

Redox grafting of aryldiazonium salts containing redox units may be used to form exceptionally thick covalently attached conducting films, even in the micrometers range, in a controlled manner on glassy carbon and gold substrates. With the objective to investigate the mechanism of this process in detail, 1-anthraquinone (AQ) redox units were immobilized on these substrates by electroreduction of 9,10-dioxo-9,10-dihydroanthracene-1-diazonium tetrafluoroborate. Electrochemical quartz crystal microbalance was employed to follow the grafting process during a cyclic voltammetric sweep by recording the frequency change. The redox grafting is shown to have two mass gain regions/phases: an irreversible one due to the addition of AQ units to the substrate/film and a reversible one due to the association of cations from the supporting electrolyte with the AQ radical anions formed during the sweeping process. Scanning electrochemical microscopy was used to study the relationship between the conductivity of the film and the charging level of the AQ redox units in the grafted film. For that purpose, approach curves were recorded at a platinum ultramicroelectrode for AQ-containing films on gold and glassy carbon surfaces using the ferro/ferricyanide redox system as redox probe. It is concluded that the film growth has its origin in electron transfer processes occurring through the layer mediated by the redox moieties embedded in the organic film.     

Zinc oxide-potassium ferricyanide composite thin film matrix for biosensing applications

Thin film of zinc oxide-potassium ferricyanide (ZnO-KFCN) composite has been deposited on indium tin oxide (ITO) coated corning glass using pulsed laser deposition (PLD). The composite thin film electrode has been exploited for amperometric biosensing in a mediator-free electrolyte. The composite matrix has the advantages of high iso-electric point of ZnO along with enhanced electron communication due to the presence of a redox species in the matrix itself. Glucose oxidase (GOx) has been chosen as the model enzyme for studying the application of the developed matrix to biosensing. The sensing response of the bio-electrode, GOx/ZnO-KFCN/ITO/glass, towards glucose was studied using cylic voltammetry (CV) and photometric assay. The bio-electrode exhibits good linearity from 2.78 mM to 11.11 mM glucose concentration. The low value of Michaelis-Menten constant (1.69 mM) indicates an enhanced affinity of the immobilized enzyme towards its substrate. A quassireversible system is obtained with the composite matrix. The results confirm promising application of the ZnO-KFCN composite matrix for amperometric biosensing applications in a mediator-less electrolyte that could lead to the realization of an integrated lab-on-chip device.     

Effects of pretreatments and modifiers on electrochemical properties of carbon paste electrodes

The electrochemical properties of carbon paste electrodes (CPEs), including unmodified and modified with protein and polycations, were investigated by impedance spectroscopy (IS) using ferricyanide and ferrocene monocarboxylic acid (FcMA) as redox probes. Various electrochemical pretreatments were applied to the unmodified CPE. The heterogeneous charge transfer rate constant of ferro/ferricyanide couple is enhanced by 2 to 10 times compared with that obtained at untreated electrodes. It was found that for ferricyanide the more suitable pretreatments are successive cyclic voltammetric scans, cathodization and a square wave-like stepping rather than high-potential anodization. However, the pretreatment only exhibits a slight effect on the kinetics of FcMA. At the CPEs containing modifier, the electron transfer rate of the redox couple depends more on the pH of electrolyte solution if ferro/ferricyanide is used. The results can be explained by the differently charged states of the CPEs that were caused by the protonation or deprotonation of the modifiers in various pH solutions and demonstrate the importance of the electrostatic interaction on the kinetics of the highly polar species such as ferricyanide. The different adsorptive behavior of ferricyanide and FcMA is also discussed.     

Surface control and cryogenic durability of transparent CNT coatings on dip-coated glass substrates

Transparent carbon nanotube (CNT) coatings were deposited on boro-silicate glass substrates by dip-coating. Ultraviolet-visible (UV) spectra, surface resistance measurement, and the wettability tests were used to investigate the optical transmittance and electrical properties of these CNT coatings. The changes in electrical and optical properties of these coatings were observed to be functions of the number of dip-coating cycles. The surface resistance of the CNT coated substrates decreased dramatically as the number of dip-coatings was increased, whereas the increases in the CNT layer thickness beyond that for the first dipping cycle had little effect on the transparent-properties. Static contact angle measurements proved to be an effective means for evaluating the surface morphology of CNT coatings. The interfacial durability of the CNT coatings on a glass substrate was much better than that of ITO coatings over the temperature range from -150°C to +150°C.     

Protein resistance of titanium oxide surfaces modified by biologically inspired mPEG-DOPA

In the present study, we have utilized X-ray photoelectron spectroscopy (XPS), spectroscopic ellipsometry (ELM), and optical waveguide lightmode spectroscopy (OWLS) to examine the surface adsorption and protein resistance behavior of bio-inspired polymers consisting of poly(ethylene glycol) (PEG) conjugated to peptide mimics of mussel adhesive proteins. Peptides containing up to three residues of 3,4-dihydroxyphenylalanine (DOPA), a key component of mussel adhesive proteins, were conjugated to monomethoxy-terminated PEG polymers. These mPEG-DOPA polymers were found to be highly adhesive to TiO2 surfaces, with quantitative XPS analysis providing useful insight into the binding mechanism. Additionally, the antifouling properties of immobilized PEG were reflected in the excellent resistance of mPEG-DOPA-modified TiO2 surfaces to protein adsorption. Measurements of mPEG-DOPA and human serum adsorption were related in terms of ethylene glycol (EG) surface density and serum mass adsorbed and demonstrated a threshold of approximately 15-20 EG/nm2, above which substantially little protein adsorbs. With respect to surface density of adsorbed PEG and the associated nonfouling behavior of the adlayers, strong parallels exist between the nonfouling properties of the surface-bound mPEG-DOPA polymers and PEG polymers immobilized to surfaces using other approaches. Peptide anchors containing three DOPA residues resulted in PEG surface densities higher than those achieved using several existing PEG immobilization strategies, suggesting that peptide mimics of mussel adhesive proteins may be useful for achieving high densities of protein-resistant polymers on surfaces.     

Bifunctional electroactive nanostructured membranes

The advent of techniques based upon the spontaneous assembly of different materials with control over molecular architecture has afforded the fabrication of composite thin films for many nanotechnological applications. The layer-by-layer technique (LbL), in particular, has largely been used in the molecular level processing of nanohybrid systems in the form of multilayers, owing to its low cost and experimental simplicity. In this study we describe the fabrication of a novel, bifunctional film containing platinum nanoparticles/polyamidoamine (PAMAM) dendrimers. Pt nanoparticles were chemically synthesized/stabilized in the presence of PAMAM dendrimers and incorporated in LbL films in conjunction with nickel tetrasulfonated phthalocyanine (NiTsPc). A metallophthalocyanine was chosen because of its well-defined redox activity. Indium tin oxide (ITO)-covered glass plates were used as substrates for film deposition. The nanocomposites displayed high electrocatalytic activity toward dopamine and hydrogen peroxide molecules, two compounds with dissimilar chemical properties.