C2-symmetric bis(oxazolinato)lanthanide catalysts for enantioselective intramolecular hydroamination/cyclization

C(2)-symmetric bis(oxazolinato)lanthanide complexes of the type [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), [(4S,5R)-Ar(2)Box]La[N(TMS)(2)](2), and [(4S)-Ph-5,5-Me(2)Box]La[N(TMS)(2)](2) (Box = 2,2'-bis(2-oxazoline)methylenyl; Ar = 4-tert-butylphenyl, 1-naphthyl; TMS = SiMe(3)) serve as precatalysts for the efficient enantioselective intramolecular hydroamination/cyclization of aminoalkenes and aminodienes. These new catalyst systems are conveniently generated in situ from the known metal precursors Ln[N(TMS)(2)](3) or Ln[CH(TMS)(2)](3) (Ln = La, Nd, Sm, Y, Lu) and 1.2 equiv of commercially available or readily prepared bis(oxazoline) ligands such as (4R,5S)-Ph(2)BoxH, (4S,5R)-Ar(2)BoxH, and (4S)-Ph-5,5-Me(2)BoxH. The X-ray crystal structure of [(4S)-(t)BuBox]Lu[CH(TMS)(2)](2) provides insight into the structure of the in situ generated precatalyst species. Lanthanides having the largest ionic radii exhibit the highest turnover frequencies as well as enantioselectivities. Reaction rates maximize near 1:1 BoxH:Ln ratio (ligand acceleration); however, increasing the ratio to 2:1 BoxH:Ln decreases the reaction rate, while affording enantiomeric excesses similar to the 1:1 BoxH:Ln case. A screening study of bis(oxazoline) ligands reveals that aryl stereodirecting groups at the oxazoline ring 4 position and additional substitution (geminal dimethyl or aryl) at the 5 position are crucial for high turnover frequencies and good enantioselectivities. The optimized precatalyst, in situ generated [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), exhibits good rates and enantioselectivities, comparable to or greater than those achieved with chiral C(1)-symmetric organolanthanocene catalysts, even for poorly responsive substrates (up to 67% ee at 23 degrees C). Kinetic studies reveal that hydroamination rates are zero order in [amine substrate] and first order in [catalyst], implicating the same general mechanism for organolanthanide-catalyzed hydroamination/cyclizations (intramolecular turnover-limiting olefin insertion followed by the rapid protonolysis of an Ln-C bond by amine substrate) and implying that the active catalytic species is monomeric.     

Using a tripod as a chiral chelating ligand: chemical exchange between equivalent molecular structures in palladium catalysis with 1,1,1-tris(oxazolinyl)ethane ("trisox")

Threefold symmetrical chiral podands may simplify the stereochemistry of key catalytic intermediates for cases in which they only act as bidentate ligands. This applies to systems in which chemical exchange between the different kappa2-coordinated forms takes place and in which the non-coordinated sidearm may play a direct or indirect role at some earlier or later stage in the catalytic cycle. Palladium(II)-catalysed allylic substitutions provide appropriate test reactions along these lines. A series of neutral dichloropalladium(II) complexes, [PdCl2(iPr-trisox)] (1a), [PdCl2(Ph-trisox)] (1b), [PdCl2(Bn-trisox)] (1c) and [PdCl2(Ind-trisox)] (1d) (trisox=1,1,1-tris(oxazolinyl)ethane) were synthesised by reaction of the respective trisox derivative with [PdCl2(PhCN)2] and characterised inter alia by 15N NMR spectroscopy. Direct detection of the heteronuclei without isotope enrichment and with "normal" sample concentrations was achieved with the aid of a cryogenically cooled NMR probe on a 600 MHz NMR spectrometer. Whereas the 15N nuclei of the coordinated oxazoline rings resonate at delta=160-167 ppm and appear as two singlets due to their diastereotopicity, the signal assigned to the dangling oxazoline "arm" is observed at delta=238-240 ppm. Variable-temperature NMR studies along with a systematic series of magnetisation transfer experiments established exchange between ligating and non-ligating oxazoline rings. Reaction of [Pd(allyl)(cod)]BF4 (cod=cyclooctadiene) with Ph-trisox in CH(2)Cl(2) gave the corresponding allyl complex 2, for which fast exchange between the three oxazoline heterocycles as well as between the exo and endo diastereomers was observed along with a very slow eta3-eta1-eta3 process of the allyl fragment (magnetisation transfer). Palladium(0) complexes were prepared by reaction of trisox derivatives or sidearm-functionalised BOX (BOX=bis(oxazolinyl)dimethylmethane) ligands with [Pd(nbd)(alkene)] (nbd=norbornadiene, alkene=maleic anhydride or tetracyanoethylene). X-ray diffraction studies of the iPr-trisox and Ph-trisox complexes (3a and 3b) established Y-shaped trigonal planar coordination geometries with the trisox ligand coordinated in a bidentate fashion, whilst the pi-coordinated maleic anhydride ligand adopts one of the two possible diastereotopic orientations. As the catalytic test reaction, the allylic alkylation of 1,3-diphenylprop-2-enyl acetate substrate with dimethyl malonate as nucleophile (in the presence of N,O-bis(trimethylsilyl)acetamide) was investigated for the trisox derivatives, their BOX analogues, and a series of less symmetric "sidearm" functionalised bisoxazolines. The trisoxazoline-based catalysts generally induce a better enantioselectivity compared to their bisoxazoline analogues and display significant reduction of the induction period as well as rate enhancement.     

Three-coordinate [Cu(II)X(3)](-) (X=Cl, Br), trapped in a molecular crystal

Mixtures of [Ph(3)PNPPh(3)](+)Cl(-) with CuBr(2) (or CuBr(2)+CuCl(2)) in ethanol/dichloromethane yield crystals containing three-coordinate copper(II) with mixed chloride and bromide ligands, namely [Ph(3)PNPPh(3)](+)[CuCl(0.9)Br(2.1)](-) (1) and [Ph(3)PNPPh(3)](+)[CuCl(2.4)Br(0.6)](-) (2). The trigonal-planar coordination of copper(II) is angularly distorted but unambiguous, as there is no other halide ligand within 6.7 A of the copper atom. Density functional theory (DFT) calculations on planar [CuClBr(2)](-) show that the energy surface for angle bending is very soft. Crystallisation in the presence of CH(3)CN yields [Ph(3)PNPPh(3)](+)[CuCl(0.7)Br(2.3)(NCCH(3))](-) (3), in which there is additional secondary coordination by NCCH(3) (Cu-N 2.44 A). DFT calculations of the potential energy surface for this secondary coordination show that it is remarkably flat (<3 kcal mol(-1) for a variation of Cu-N by 0.8 A). The crystal packing in 1, 2 and 3, which involves multiple phenyl embraces between [Ph(3)PNPPh(3)](+) ions and numerous C-H...Cl and C-H...Br motifs, is associated with intermolecular energies that are larger than the variations in intramolecular energies. For reference, the crystal structures of [Ph(3)PNPPh(3)(+)](2)[Cu(2)Cl(6)](2-) (4) and [Ph(3)PNPPh(3)(+)](2)[Cu(2)Br(6)](2-) (5) are described. We conclude 1) that three-coordinate copper(II) with monatomic halide ligands, although uncommon, can be regarded as normal, 2) that steric control by ligands is not necessary to enforce three-coordination, 3) that a hydrophobic aryl environment stabilises [Cu(Cl/Br)(3)](-), and 4) that the energy change in the transition from three- to four-coordinate copper(II) is very small (ca 5 kcal mol(-1)).     

Chiral induction via the disassembly of diruthenium(II,III) tetraacetate by chiral diphosphines

[Ru(2)(μ-O(2)CCH(3))(4)(MeOH)(2)](PF(6)) reacts with chiral diphosphines (R,R)- and (S,S)-chiraphos, leading to disassembly and production of the enantiomers Λ-[Ru(η(2)-O(2)CCH(3))(η(2)-(R,R)-chiraphos)(2)](PF(6)) and Δ-[Ru(η(2)-O(2)CCH(3))(η(2)-(S,S)-chiraphos)(2)](PF(6)) in high yield and purity. X-ray crystallography and solid-state circular dichroism (CD) show that only the indicated isomers are present in the solid state. Solution CD measurements also indicate their predominance in solution.     

beta-Diiminato ligand (L) transformations in reactions of KL with PI3 and I2 [L = {N(C6H3Pr(i)2-2,6)C(H)}2CPh

The reaction of the potassium beta-diiminate KL (L = [{N(Ar)C(H)}(2)CPh](-); Ar = C(6)H(3)Pr(i)(2)-2,6) with PI(3) unexpectedly produced a phosphenium salt of the intermolecularly C,C-coupled ligand [P(I){N(Ar)CH}(2)C(C(6)H(4)-4)C(Ph)(CH[double bond, length as m-dash]NAr)(2)](+)[I(3)](-), while an intramolecularly N,N-coupled salt [N[upper bond 1 start](Ar)C(H)C(Ph)C(H)N[upper bond 1 end](Ar)](+)[I(5)](-) was isolated from KL + I(2).     

Chiral fluorous dialkoxy-diamino zirconium complexes: synthesis and use in stereospecific polymerization of 1-hexene

New catalysts for the isospecific polymerization of 1-hexene based on cationic zirconium complexes incorporating the tetradentate fluorous dialkoxy-diamino ligands [OC(CF(3))(2)CH(2)N(Me)(CH(2))(2)N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(2)NO)(2-)] and [OC(CF(3))(2)CH(2)N(Me)(1R,2R-C(6)H(10))N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(Cy)NO)(2-)] have been developed. The chiral fluorous diamino-diol [(ON(Cy)NO)H(2), 2] was prepared by ring-opening of the fluorinated oxirane (CF(3))(2)COCH(2) with (R,R)-N,N'-dimethyl-1,2-cyclohexanediamine. Proligand 2 reacts cleanly with [Zr(CH(2)Ph)(4)] and [Ti(OiPr)(4)] precursors to give the corresponding dialkoxy complexes [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3) and [Ti(OiPr)(2)(ON(Cy)NO)] (4), respectively. An X-ray diffraction study revealed that 3 crystallizes as a 1:1 mixture of two diastereomers (Lambda-3 and Delta-3), both of which adopt a distorted octahedral structure with trans-O, cis-N, and cis-CH(2)Ph ligands. The two diastereomers Lambda-3 and Delta-3 adopt a C(2)-symmetric structure in toluene solution, as established by NMR spectroscopy. Cationic complexes [Zr(CH(2)Ph)(ON(2)NO)(THF)(n)](+) (n=0, anion=[B(C(6)F(5))(4)](-), 5; n=1, anion=[PhCH(2)B(C(6)F(5))(3)](-), 6) and [Zr(CH(2)Ph)(ON(Cy)NO)(THF)](+)[PhCH(2)B(C(6)F(5))(3)](-) (7) were generated from the neutral parent precursors [Zr(CH(2)Ph)(2)(ON(2)NO)] (H) and [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3), and their possible structures were determined on the basis of (1)H, (19)F, and (13)C NMR spectroscopy and DFT methods. The neutral zirconium complexes H and 3 (Lambda-3/Delta-3 mixture), when activated with B(C(6)F(5))(3) or [Ph(3)C](+)[B(C(6)F(5))(4)](-), catalyze the polymerization of 1-hexene with overall activities of up to 4500 kg PH mol Zr(-1) h(-1), to yield isotactic-enriched (up to 74 % mmmm) polymers with low-to-moderate molecular weights (M(w)=4800-47 200) and monodisperse molecular-weight distributions (M(w)/M(n)=1.17-1.79).     

Spontaneous Resolution of a Mixed-Ligand Nickel(II) Coordination Polymer with Achiral Precursors

Metal-center-driven spontaneous resolution of a chiral coordination polymer, [Ni(SDB)(BIX)](n) (1), from achiral precursors has been probed by single-crystal X-ray diffraction and circular dichroism spectroscopy. Enantiomorphs 1P and 1M showed a parallel interpenetrated 2D → 3D chiral framework with (8(2).10) topology. Switching of the metal center under the same reaction parameters resulted in isostructural achiral and noninterpenetrating (4,4) grid-type sql networks [M(SDB)(BIX)](n), where M = Co(II), Zn(II), and Cd(II) for 2-4, respectively.     

Shaping and enforcing coordination spheres: the implications of C3 and C1 chirality in the coordination chemistry of 1,1,1-tris(oxazolinyl)ethane ("trisox")

A key feature of tris(oxazolinyl)ethane ("trisox") ligands, which have shown broad scope in asymmetric catalysis, is the orientation and steric demand of their oxazoline substituents. This, along with the modularity of their synthesis determines their coordination chemistry. The possibility to combine oxazolines, in which the stereogenic centers adjacent to the N-donor atoms have different absolute configuration, whilst retaining their ability to coordinate as tripodal ligands, has been demonstrated by the synthesis of the enantiomerically pure C3-symmetric iPr-trisox(S,S,S) and C1-symmetric iPr-trisox(S,S,R) and their reaction with [Mo(CO)3(NCMe)3] yielding [Mo{iPr-trisox(S,S,S)}(CO)3] (1 a) and [Mo{iPr-trisox(S,S,R)}(CO)3] (1 b), respectively. The non-autocomplementarity of two homochiral trisox ligands at one metal center has been demonstrated by reaction of rac-C3 iPr-trisox with one equivalent of [Co(ClO4)2].6 H2O, giving the centrosymmetric heterochiral complex [Co(iPr-trisox)2](ClO4)2 (3), whereas an analogous reaction with the enantiopure ligand yielded a mixture of Co(II) complexes, which is characterized by the total absence of a [(trisox)2Co](+/2+) ion. The scope of the trisox ligand in terms of facial coordination to both early and late transition metals was demonstrated by the synthesis and structural characterization of the mononuclear complexes [ScCl3(iPr-trisox)] (4), [Fe(tBu-trisox)(NCMe)3](BF4)2 (5), and [Ru(eta6-p-cymene)(iPr-trisox)](PF6)2 (6). The facial coordination of their three ligating atoms to a metal center may be impeded if the transition-metal center stereoelectronically strongly favors a non-deltahedral coordination sphere, which is generally the case for the heavier d8-transition-metal atoms/ions. Reaction of iPr-trisox with [Rh(cod)2]BF4 led to the formation of the 16-electron d8-configured complex [Rh(iPr-trisox)(cod)](BF4) (7), which is oxidized by CsBr3 to give the Rh(III) complex [RhBr3(iPr-trisox)] (8) possessing a C3-symmetric structure with a kappa3-N-trisox ligand. The crystalline salts [M2(mu-Cl3)(iPr-trisox)2](PF6) (M=Fe(II): 9, Co(II): 10, Ni(II): 11), were prepared by addition of one molar equivalent of iPr-trisox and an excess of KPF6 to solutions of the anhydrous (FeCl2) or hydrated metal halides (CoCl2.6 H2O, NiCl2.6 H2O). All dinuclear complexes display weak magnetic coupling. For the mononuclear species [CuCl2(iPr-trisox)] (12) the removal of a chloride anion and thus the generation of a dinuclear chloro-bridged structure failed due to Jahn-Teller destabilization of a potential octahedral coordination sphere.     

Redox-adaptable copper hosts. Pyridazine-linked cryptands accommodate copper in a range of redox States

A series of structurally characterized copper complexes of two pyridazine-spaced cryptands in redox states + (I,I), (II,I), (II), (II,II) are reported. The hexaimine cryptand L(I) [formed by the 2 + 3 condensation of 3,6-diformylpyridazine with tris(2-aminoethyl)amine (tren)] is able to accommodate two non-stereochemically demanding copper(I) ions, resulting in [Cu(I)(2)L(I)](BF(4))(2) 1, or one stereochemically demanding copper(II) ion, resulting in [Cu(II)L(I)()](BF(4))(2) 3. Complex 3 crystallizes in two forms, 3a and 3b, with differing copper(II) ion coordination geometries. Addition of copper(I) to the monometallic complex 3 results in the mixed-valence complex [Cu(I)Cu(II)L(I)](X)(3) (X = PF(6)(-), 2a; X = BF(4)(-), 2b) which is well stabilized within this cryptand as indicated by electrochemical studies (K(com) = 2.1 x 10(11)). The structurally characterized, octaamine cryptand L(A), prepared by sodium borohydride reduction of L(I), is more flexible than L(I) and can accommodate two stereochemically demanding copper(II) ions, generating the dicopper(II) cryptate [Cu(II)(2)L(A)](BF(4))(4) 4. Electrochemical studies indicate that L(A) stabilizes the copper(II) oxidation state more effectively than L(I); no copper redox state lower than II,II has been isolated in the solid state using this ligand.     

Studies of a series of [Ni(P(R)2N(Ph)2)2(CH3CN)]2+ complexes as electrocatalysts for H2 production: substituent variation at the phosphorus atom of the P2N2 ligand

A series of [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes containing the cyclic diphosphine ligands [P(R)(2)N(Ph)(2) = 1,5-diaza-3,7-diphosphacyclooctane; R = benzyl (Bn), n-butyl (n-Bu), 2-phenylethyl (PE), 2,4,4-trimethylpentyl (TP), and cyclohexyl (Cy)] have been synthesized and characterized. X-ray diffraction studies reveal that the cations of [Ni(P(Bn)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) and [Ni(P(n-Bu)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) have distorted trigonal bipyramidal geometries. The Ni(0) complex [Ni(P(Bn)(2)N(Ph)(2))(2)] was also synthesized and characterized by X-ray diffraction studies and shown to have a distorted tetrahedral structure. These complexes, with the exception of [Ni(P(Cy)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2), all exhibit reversible electron transfer processes for both the Ni(II/I) and Ni(I/0) couples and are electrocatalysts for the production of H(2) in acidic acetonitrile solutions. The heterolytic cleavage of H(2) by [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes in the presence of p-anisidine or p-bromoaniline was used to determine the hydride donor abilities of the corresponding [HNi(P(R)(2)N(Ph)(2))(2)](BF(4)) complexes. However, for the catalysts with the most bulky R groups, the turnover frequencies do not parallel the driving force for elimination of H(2), suggesting that steric interactions between the alkyl substituents on phosphorus and the nitrogen atom of the pendant amines play an important role in determining the overall catalytic rate.     

Homochiral nickel coordination polymers based on salen(Ni) metalloligands: synthesis, structure, and catalytic alkene epoxidation

One-dimensional (1D) homochiral nickel coordination polymers [Ni(3)(bpdc)(RR-L)(2)·(DMF)](n) (2R, RR-L = (R,R)-(-)-1,2-cyclohexanediamino-N,N'-bis(3-tert-butyl-5-(4-pyridyl)salicylidene), bpdc = 4,4'-biphenyldicarboxylic acid) and [Ni(3)(bpdc)(SS-L)(2)·(DMF)](n) (2S, SS-L = (S,S)-(-)-1,2-cyclohexanediamino-N,N'-bis(3-tert-butyl-5-(4-pyridyl)salicylidene) based on enantiopure pyridyl-functionalized salen(Ni) metalloligand units NiL ((1,2-cyclohexanediamino-N,N'-bis(3-tert-butyl-5-(4-pyridyl)salicylidene))Ni(II)) have been synthesized and characterized by microanalysis, IR spectroscopy, solid-state UV-vis spectroscopy, thermogravimetric analysis (TGA), circular dichroism (CD) spectroscopy, cyclic voltammetric measurement, and powder and single crystal X-ray diffraction. Each NiL as unbridging pendant metalloligand uses one terminal pyridyl group to coordinate achiral unit (nickel and bpdc(2-)) building a helical chain, while the other pyridyl group remains uncoordinated. Both 2R and 2S contain left- and right-handed helical chains made of the achiral building blocks, while the NiL as remote external chiral source is perpendicular to the backbone of the helices. The nickel coordination polymers 2R and 2S containing unsaturated active nickel center in metalloligand NiL can be used as self-supported heterogeneous catalysts. They show catalytic activity comparable with their homogeneous counterpart in alkene epoxidation and exhibit great potential as recyclable catalysts.     

Solid-to-solid formation at the solid-liquid interface leading to a chiral coordination polymer from an achiral monomer

An achiral crystal of a simple mononuclear copper complex [Cu(II)(C(6)H(8)N(2))(2)SO(4)]·H(2)O (1), on dipping into an aqueous azide solution, transforms into a chiral crystal of a coordination polymer [Cu(II)(C(6)H(8)N(2))(N(3))(2)](n) (2) in a solid-liquid interface reaction demonstrating replacement of a sulfate anion by an azide anion from an aqueous solution.     

A C2-symmetric, basic Fe(III) carboxylate complex derived from a novel triptycene-based chelating carboxylate ligand

A triptycene-based bis(benzoxazole) diacid ligand H(2)L2(Ph4) bearing sterically encumbering groups was synthesized. Treatment of H(2)L2(Ph4) with Fe(OTf)(3) afforded a C(2)-symmetric trinuclear iron(III) complex, [NaFe(3)(L2(Ph4))(2)(μ(3)-O)(μ-O(2)CCPh(3))(2)(H(2)O)(3)](OTf)(2) (8). The triiron core of this complex adopts the well known "basic iron acetate" structure where the heteroleptic carboxylates, comprising two Ph(3)CCO(2)(-) and two (L2(Ph4))(2-) ligands, donate the six carboxylate bridges. The (L2(Ph4))(2-) ligand undergoes only minor conformational changes upon formation of the complex.     

Ruthenium(II) and ruthenium(IV) complexes containing kappa1-P-, kappa2-P,O-, and kappa3-P,N,O-iminophosphorane-phosphine ligands Ph2PCH2P[=NP(=O)(OR)2]Ph2 (R = Et,Ph): synthesis,reactivity, theoretical studies,and catalytic activity in transfer hydrogenation of cyclohexanone

[(Ru(eta(6)-p-cymene)(mu-Cl)Cl)(2)] and [(Ru(eta(3):eta(3)-C(10)H(16))(mu-Cl)Cl)(2)] react with Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2) (R = Et (1a), Ph (1b)) affording complexes [Ru(eta(6)-p-cymene)Cl(2)(kappa(1)-P-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))] (R = Et (2a), Ph (2b)) and [Ru(eta(3):eta(3)-C(10)H(16))Cl(2)(kappa(1)-P-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))] (R = Et (6a), Ph (6b)). While treatment of 2a with 1 equiv of AgSbF(6) yields a mixture of [Ru(eta(6)-p-cymene)Cl(kappa(2)-P,O-Ph(2)PCH(2)P[=NP(=O)(OEt)(2)]Ph(2))][SbF(6)] (3a) and [Ru(eta(6)-p-cymene)Cl(kappa(2)-P,N-Ph(2)PCH(2)P[=NP(=O)(OEt)(2)]Ph(2))][SbF(6)] (4a), [Ru(eta(6)-p-cymene)Cl(kappa(2)-P,O-Ph(2)PCH(2)P[=NP(=O)(OPh)(2)]Ph(2))][SbF(6)] (3b) and [Ru(eta(3):eta(3)-C(10)H(16))Cl(kappa(2)-P,O-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))][SbF(6)] (R = Et (7a), Ph (7b)) are selectively formed from 2b and 6a,b. Complexes [Ru(eta(6)-p-cymene)(kappa(3)-P,N,O-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))][SbF(6)](2) (R = Et (5a), Ph (5b)) and [Ru(eta(3):eta(3)-C(10)H(16))(kappa(3)-P,N,O-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))][SbF(6)](2) (R = Et (8a), Ph (8b)) have been prepared using 2 equiv of AgSbF(6). The reactivity of 3-5a,b has been explored allowing the synthesis of [Ru(eta(6)-p-cymene)X(2)(kappa(1)-P-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))] (R = Et, Ph; X = Br, I, N(3), NCO (9-12a,b)). The catalytic activity of 2-8a,b in transfer hydrogenation of cyclohexanone, as well as theoretical calculations on the models [Ru(eta(6)-C(6)H(6))Cl(kappa(2)-P,N-H(2)PCH(2)P[=NP(=O)(OH)(2)]H(2))]+ and [Ru(eta(6)-C(6)H(6))Cl(kappa(2)-P,O-H(2)PCH(2)P[=NP(=O)(OH)(2)]H(2))]+, has been also studied.     

H2O2-reactivity of copper(II) complexes supported by tris[(pyridin-2-yl)methyl]amine ligands with 6-phenyl substituents

The structure and H(2)O(2)-reactivity of a series of copper(II) complexes supported by tris[(pyridin-2-yl)methyl]amine (TPA) derivatives having a phenyl group at the 6-position of pyridine donor group(s) [(6-phenylpyridin-2-yl)methyl]bis[(pyridin-2-yl)methyl]amine (Ph(1)TPA), bis[(6-phenylpyridin-2-yl)methyl][(pyridin-2-yl)methyl]amine (Ph(2)TPA), and tris[(6-phenylpyridin-2-yl)methyl]amine (Ph(3)TPA) have systematically been examined to get insights into the aromatic substituent (6-Ph) effects on the coordination chemistry of TPA ligand system. The X-ray crystallographic analyses have revealed that [Cu(II)(TPA)(CH(3)CN)](ClO(4))(2) (CuTPA) and [Cu(II)(Ph(3)TPA)(CH(3)CN)](ClO(4))(2) (3) exhibit a trigonal bipyramidal structure, whereas [Cu(II)(Ph(1)TPA)(CH(3)CN)](ClO(4))(2) (1) shows a slightly distorted square pyramidal structure and [Cu(II)(Ph(2)TPA)(CH(3)CN)](ClO(4))(2) (2) has an intermediate structure between trigonal bipyramidal and square pyramidal. On the other hand, the UV-vis and ESR data have suggested that all the copper(II) complexes have a similar trigonal bipyramidal structure in solution. The redox potentials of CuTPA, 1, 2, and 3 have been determined as E(1/2) = -0.34, -0.28, -0.16, and -0.04 mV vs Ag/AgNO(3), respectively, demonstrating that introduction of each 6-Ph group causes positive shift of E(1/2) about 0.1 V. Notable difference in H(2)O(2)-reactivity has been found among the copper(II) complexes. Namely, CuTPA and 1 afforded mononuclear copper(II)-hydroperoxo complexes CuTPA-OOH and 1-OOH, respectively, whereas complex 2 provided bis(mu-oxo)dicopper(III) complex 2-oxo. On the other hand, copper(II) complex 3 was reduced to the corresponding copper(I) complex 3(red). On the basis of the H(2)O(2)-reactivity together with the X-ray structures and the redox potentials of the copper(II) complexes, the substituent effects of 6-Ph are discussed in detail.     

Tetranuclear manganese complexes with dimer-of-dimer and ladder structures from the use of a bis-bipyridyl ligand

The reaction of the bis-chelating ligand 1,2-bis(2,2'-bipyridine-6-yl)ethane (L) with the trinuclear species of formula [Mn(3)O(O(2)CR)(6)(py)(3)](ClO(4)) (R = Me (1); R = Et (2); R = Ph (3)) has afforded the new tetranuclear mixed-valent complexes [Mn(4)O(2)(O(2)CR)(4)L(2)](ClO(4))(2) (R = Me (4); R = Et (5); R = Ph (6)) and [Mn(4)O(2)(OMe)(3)(O(2)CR)(2)L(2)(MeOH)](ClO(4))(2) (R = Me (7); R = Et (8); R = Ph (9)). Complexes 4-6 were obtained in yields of 20%, 44%, and 37%, respectively. They are mixed-valent, with an average Mn oxidation state of +2.5. Complexes 7-9 were obtained in yields of 57%, 65%, and 70%, respectively. They are also mixed-valent, but with an average Mn oxidation state of +2.75. Complexes 4 x 2THF and 9 x 3MeOH x H(2)O crystallize in the triclinic space group P1 macro and contain [Mn(4)(mu(3)-O)(2)](6+) and [Mn(4)(mu(3)-O)(2)(mu-OMe)(2)](5+) cores, respectively, the latter being a new structural type in the family of Mn(4) complexes. Reactivity studies of 4-9 have shown that 4-6 can be converted into 7-9, respectively, and vice versa. The magnetic properties of 5 and 9 have been studied by dc and ac magnetic susceptibility techniques. Complex 5 displays antiferromagnetic coupling between its Mn ions resulting in a spin ground state of S = 0. Complex 9 also displays antiferromagnetic coupling, but the resulting ground state is S = (7)/(2), as confirmed by fitting magnetization versus field data collected for 9 at low temperatures, which gave S = (7)/(2), D = -0.77 cm(-1), and g = 1.79. Complex 9 exhibits a frequency-dependent out-of-phase ac susceptibility peak, indicative of the slow magnetization relaxation that is diagnostic of single-molecule magnetism behavior.     

三氟甲基磺酸铜(II)手性衍生物:不对称合成中的一类高效催化剂

三氟甲基磺酸铜 [Cu(OTf) 2 ]与各种手性磷氮配体络合催化不对称合成已取得了巨大进展 .详细评述了近五年来该类手性铜催化剂在各种不对称催化反应中的最新应用     

环丙烷化反应中催化剂固载化的研究进展

总结了近年来关于环丙烷化反应中催化剂固载化的研究进展,包括非手性催化剂与手性催化剂的固载化,其中手性催化剂的固载化包括Schiff碱-铜、手性卟啉-钌、吡咯烷酮羧酸酯-铑、吡咯烷-金属、双唑啉-金属及手性二磺胺等催化剂的固载化.另外,还讨论了离子液体与氟两相体系在该领域的应用研究.     

Synthesis and characterization of heterobimetallic oxo-bridged aluminum-rare earth metal complexes

Reaction of the aluminum hydroxide LAl(OH)[C(Ph)CH(Ph)] (1, L = HC[(CMe)(NAr)](2), Ar = 2,6-iPr(2)C(6)H(3)) with Y(CH(2)SiMe(3))(3)(THF)(2) yielded the oxo-bridged heterobimetallic yttrium dialkyl complex LAl[C(Ph)CH(Ph)](μ-O)Y(CH(2)SiMe(3))(2)(THF)(2) (2). Alkane elimination reaction of 2 with 2-(imino)pyrrole [NN]H ([NN]H = 2-(ArN═CH)-5-tBuC(4)H(2)NH) afforded the yttrium monoalkyl complex LAl[C(Ph)CH(Ph)] (μ-O)Y(CH(2)SiMe(3))[NN](THF)(2) (5). Alternatively, 5 can be prepared in high yield by reaction of 1 with [NN]Y(CH(2)SiMe(3))(2)(THF)(2) (3). The analogous samarium alkyl complex LAl[C(Ph)CH(Ph)](μ-O)Sm(CH(2)SiMe(3))[NN](THF)(2) (6) was prepared similarly. Reactions of 5 and 6 with 1 equiv of iPrOH yielded the corresponding alkoxyl complexes 7 and 8, respectively. The molecular structures of 3, 6, and 8 have been determined by X-ray single-crystal analysis. Complexes 2, 3, 5, 7, and 8 have been investigated as lactide polymerization initiators. The heterobimetallic alkoxyl 8 is highly active to yield high molecular weight (M(n) = 6.91 × 10(4)) polylactides with over 91% conversion at the lactide-to-initiator molar ratio of 2000.     

Synthesis and characterization of methylammonium borohydride

A new borohydride, [CH(3)NH(3)](+)[BH(4)](-), has been synthesized through the metathesis of CH(3)NH(3)F and NaBH(4) in methylamine. Room-temperature X-ray diffraction studies have shown that [CH(3)NH(3)](+)[BH(4)](-) adopts a tetragonal unit cell with considerable hydrogen mobility similar to that observed in NH(3)BH(3). The kinetics and thermodynamics of hydrogen release have been investigated and were found to follow a similar pathway to that of [NH(4)](+)[BH(4)](-). Decomposition of [CH(3)NH(3)](+)[BH(4)](-) occurred slowly at room temperature and rapidly at ca. 40 °C to form [BH(2)(CH(3)NH(2))(2)](+)[BH(4)](-), the methylated analogue of the diammoniate of diborane. The decomposition has been investigated by means of in situ X-ray diffraction and solid state (11)B NMR spectroscopy and occurred in the absence of any detectable intermediates to form crystalline [BH(2)(CH(3)NH(2))(2)](+)[BH(4)](-). [(CH(3))(2)NH(2)](+)[BH(4)](-) and [BH(2){(CH(3))(2)NH}(2)](+)[BH(4)](-) have also been synthesized through analogous routes, indicating a more general applicability of the synthetic method.