Oxyfunctionalization of non-natural targets by dioxiranes. 5. Selective oxidation of hydrocarbons bearing cyclopropyl moieties

The powerful methyl(trifluoromethyl)dioxirane (1b) was employed to achieve the direct oxyfunctionalization of 2,4-didehydroadamantane (5), spiro[cyclopropane-1,2'-adamantane] (9), spiro[2.5]octane (17), and bicyclo[6.1.0]nonane (19). The results are compared with those attained in the analogous oxidation of two alkylcyclopropanes, i.e., n-butylcyclopropane (11) and (3-methyl-butyl)-cyclopropane (14). The product distributions observed for 11 and 14 show that cyclopropyl activation of alpha-C-H bonds largely prevails when no tertiary C-H are present in the open chain in the tether; however, in the oxyfunctionalixation of 14 cyclopropyl activation competes only mildly with hydroxylation at the tertiary C-H. The application of dioxirane 1b to polycyclic alkanes possessing a sufficiently rigid framework (such as 5 and 9) demonstrates the relevance of relative orientation of the cyclopropane moiety with respect to the proximal C-H undergoing oxidation. At one extreme, as observed in the oxidation of rigid spiro compound 9, even bridgehead tertiary C-H's become deactivated by the proximal cyclopropyl moiety laying in the unfavorable "eclipsed" (perpendicular) orientation; at the other end, a cyclopropane moiety constrained in a favorable "bisected" orientation (as for didehydroadamantane 5) can activate an "alpha" methylene CH2 to compete effectively with dioxirane O-insertion into tertiary C-H bonds. Comparison with literature reports describing similar oxidations by dimethyldioxirane (1a) demonstrate that methyl(trifluoromethyl)dioxirane (1b) presents similar selectivity and remarkably superior reactivity.     

Selective hydroxylation of methane by dioxiranes under mild conditions

The direct conversion of methane to methanol at low temperatures was achieved selectively using dioxiranes 1a,b either in the isolated form or generated in situ from aqueous potassium caroate and the parent ketone at a pH close to neutrality. Results suggest that the more powerful dioxirane TFDO (1b) should be the oxidant of choice.     

Stereoselective Epoxidation of Cyclic Dienes and Trienes by Dioxiranes

Epoxides are essential building blocks in organic chemistry. The epoxidation of unsubstituted cyclic dienes 2 , 3 , 4 and triene 5 using dimethyldioxirane ( 1a ) and its trifluoro analog 1b methyl(trifluoromethyl)dioxirane has been investigated. The excellent yields obtained (90–98%) are accompanied by outstandingly high diastereoselectivities (90–98%). Interpretation of results based upon the early idea that polar groups can direct the dioxirane attack by dipole–dipole interaction provides a likely rationale, along with a more generalized mechanistic view.     

Concerning the efficient conversion of epoxy alcohols into epoxy ketones using dioxiranes

Representative epoxy alcohols are cleanly converted into the corresponding epoxy ketones in high yield by selective oxidation using dimethyldioxirane (1a) and its trifluoro analogue (1b) under mild conditions. The oxidation is found to take place leaving the configuration at the epoxy functionality unaffected. The direct oxyfunctionalization of simple cyclic epoxides with the powerful dioxirane 1b provides another attractive method to access epoxy ketones regioselectively.     

Concerning the reactivity of dioxiranes. Observations from experiments and theory

The challenging hypothesis of a "biphilic" (i.e., electrophilic vs nucleophilic) character for dioxirane reactivity, which envisages that electron-poor alkenes are attacked by dioxiranes in a nucleophilic fashion, could not be sustained experimentally. Rate data, which estimate Hammett "rho" values for the epoxidation of 3- or 4-substituted cinnamonitriles X x Ph-CH=CH-CN, unequivocally allow one to establish that dioxiranes epoxidize electrophilically even alkenes carrying electron-withdrawing groups. The greater propensity of methyl(trifluoromethyl)dioxirane TFDO (1b) to act as an electrophilic oxidant with respect to dimethyldioxirane DDO (1a) parallels the cathode reduction potentials for the two dioxiranes, as measured by cyclic voltammetry. A simple FMO approach for alkene epoxidation is helpful to conceive a likely rationale for the greater oxidizing power of TFDO as compared to DDO.     

Formation of transient intermediates in low-temperature photosensitized oxidation of an 8-(13)C-guanosine derivative

An 8-(13)C-labeled guanosine derivative, 2',3',5'-O-tert-butyldimethylsilyl-N-tert-butyldimethylsilyl-8-(13)C-guanosine, was synthesized and its photosensitized oxidation with singlet oxygen carried out below -100 degrees C. Two transient intermediates that decompose directly to the final major product 5 and CO(2) were detected by (13)C NMR between -100 and -43 degrees C. The two intermediates are carbamic acids based on (13)C NMR and 2D NMR (HMQC, HMBC) spectra and the formation of final product 5 and of 8-CO(2). No endoperoxide intermediate could be detected by low-temperature NMR spectroscopy even at -100 degrees C. A reaction mechanism is proposed involving initial [4 + 2] cycloaddition of singlet oxygen to the imidazole ring to form an unstable endoperoxide, subsequent rearrangement of the endoperoxide to a dioxirane, and decomposition of the dioxirane to the two observed intermediates. Both oxygen atoms of CO(2) are derived from a single oxygen molecule, which strongly supports a dioxirane structure for the precursor of the two observed intermediates. The distribution of products estimated by (13)C NMR accounts for all the (13)C-containing products in the reaction mixture.     

Oxidation of peptides by methyl(trifluoromethyl)dioxirane: the protecting group matters

Representative Boc-protected and acetyl-protected peptide methyl esters bearing alkyl side chains undergo effective oxidation using methyl(trifluoromethyl)dioxirane (1b) under mild conditions. We observe a protecting group dependency in the chemoselectivity displayed by the dioxirane 1b. N-Hydroxylation occurs in the case of the Boc-protected peptides, and side chain hydroxylation takes place in the case of acetyl-protected peptides. Both are attractive transformations since they yield derivatized peptides that serve as valuable synthons.     

Mechanism of the oxidation of sulfides by dioxiranes. 1. Intermediacy of a 10-S-4 hypervalent sulfur adduct

Earlier studies established that dimethyldioxirane (1a) reacts with sulfides 2 in two consecutive concerted electrophilic oxygen-transfer steps to give first sulfoxides 3 and then sulfones 4. The same sequential electrophilic oxidation model was assumed for the reaction of sulfides 2 with the strongly electrophilic methyl(trifluoromethyl)dioxirane (1b). In this paper we report on a systematic and general study on the mechanism of the reaction of simple sulfides 2 with DMDO (1a) and TFDO (1b) which provides clear evidence for the involvement of hypervalent sulfur species in the oxidation process. In the oxidation of sulfides 2a-c, diphenyl sulfide (2d), para-substituted aryl methyl sulfides 2e-i, and phenothiazine 2k with 1b, the major product was the corresponding sulfone 4, even when a 10-fold excess of sulfide relative to 1b was used. The sulfone:sulfoxide 4:3 ratio depends among other factors on the dioxirane 1a or 1b used, the sulfide substitution pattern, the polar, protic, or aprotic character of the solvent, and the temperature. The influence of these factors and also deuterium and (18)O tracer experiments performed allow a general mechanism to be depicted for these oxidations in which the key step is the reversible cyclization of a zwitterionic intermediate, 6, to form a hypervalent sulfur species, 7. The classical sequential mechanism which establishes that sulfides are oxidized first to sulfides and then to sulfones can be enclosed in our general picture of the process and represents just those particular cases in which the zwitterionic intermediate 6 decomposes prior to undergoing ring closure to afford the hypervalent sulfurane intermediate 7.     

α-Fluoro decalones as chiral epoxidation catalysts: fluorine effect

Three rigid monofluorinated trans-decalones 4a, 5e, and 6e (90% ee) have been synthesized from commercially available (−)-(R)-methyl naphthalenone (90% ee). Their structures have been fully characterized (NMR, X-ray): ketones 4a and 5e are Me,F-disubstituted α to the carbonyl with the fluorine axial and equatorial, respectively, while ketone 6e is F-monosubstituted α to the carbonyl with the fluorine equatorial. The use of these ketones as chiral catalysts for the epoxidation of trans-olefins (such as stilbene, β-methylstyrene and p-methoxy cinnamate) through the formation of dioxiranes shows (i) that dioxiranes with an equatorial fluorine α to the dioxirane ring are less reactive and provide lower ee’s than dioxiranes with an axial fluorine and having the same chirality and (ii) that an axial methyl α to the dioxirane ring is significantly less efficient than a fluorine. The results corroborate Armstrong and Houk’s theoretical model and our first hypothesis to rationalize the inverted enantioselectivities observed using α-fluorinated cyclohexanones having the same chirality, i.e.: rapid ring inversion (Curtin–Hammett principle) allows the dioxirane conformation to have the fluorine axial (even if less populated than the other) to contribute significantly to the epoxidation reaction.     

双环氧乙烷对三类亚硝胺的羟基化过程的理论研究

采用量子化学密度泛函(DFT)方法, 在B3LYP/6-31G**水平下研究了双环氧乙烷(Dioxirane)、氧化二甲基亚硝胺(NDMA)、吡咯烷亚硝胺(NPYR)和哌啶烷亚硝胺(NPIP)中的C—H键, 三类亚硝胺化合物均形成α-羟基化产物的反应机理. 得到三类分子的羟基化反应有syn-和anti-两种进攻方式, 在气相和溶剂(CH2Cl2)中, Dioxirane氧化三类亚硝胺分子有相对低的能垒, 均容易进行α-羟基化.     

Epoxidation of chiral camphor N-enoylpyrazolidinones with methyl(trifluoromethyl)dioxirane and urea hydrogen peroxide/acid anhydride: reversal of stereoselectivity

Both diastereomeric isomers of epoxides with high optical purity are obtained when camphor N-methacryloylpyrazolidinone (1a) and N-tigloylpyrazolidinone (1b) are treated with a urea hydrogen peroxide/TFAA and methyl(trifluoromethyl)dioxirane, respectively.     

Mechanism of singlet oxygen generation during catalytic decomposition of methyl(trifluoromethyl)dioxirane by chloride ions

The mechanism of the chloride ion-induced catalytic decomposition of methyl(trifluoromethyl)dioxirane in trifluoroacetone was studied at the MP4//MP2/6-31+G(d) level of theory. The solvated chloride ion interacts with dioxirane to form an ion-dipole pair, which is transformed into the key intermediate ClO—C(Me)(CF₃)—O⁻ acting as a chain carrier in the catalytic decomposition of dioxirane. The generation of singlet oxygen occurs during the transformations of this intermediate on the singlet potential energy surface.     

Effect of geminal substitution on the strain energy of dioxiranes. Origin of the low ring strain of dimethyldioxirane

The strain energies (SE) for dioxirane (DO) dimethyldioxirane (DMDO) and related dioxiranes have been examined by several methods using high-level computational schemes (G2, G2(MP2), CBS-Q). A series of calculated O-O, C-O, and O-H bond dissociation energies (G2) point to special problems associated with classical homodesmotic reactions involving peroxides. The relative SEs of DO, DMDO, methyl(trifluoromethyl)dioxirane (TFDO), and difluorodioxirane (DFDO) have been estimated by combination of the dioxirane with cyclopropane to form the corresponding 1,3-dioxacyclohexane. The relative SE predicted for DMDO (2) is 7 kcal/mol lower than that of DO, while the SE of 1,1-difluorodioxirane (4) is 8 kcal/mol higher. The most reactive dioxirane, methyl (trifluoromethyl)dioxirane (3), has an estimated SE just 1 kcal/mol greater than that of DO but 8 kcal/mol greater than that of DMDO. Six independent methods support the proposed SE for DO of 18 kcal/mol. The SE of the parent dioxirane (DO) has been estimated relative to six-membered ring reference compounds by dimerization of dioxirane and or its combination with cyclopropane. The relative SE of cyclic hydrocarbons, ethers and peroxides have been predicted by the insertion/extrusion of -CH(2)- and -O- fragments into their respective lower and next higher homologues. The moderated SE of DMDO (approximately equal to 11 kcal/mol) has also been estimated on the basis of group equivalent reactions. The unusual thermodynamic stability of DMDO is largely a consequence of combined geminal dimethyl and dioxa substitution effects and its associated strong C-H bonds and C-CH(3) bonds. The data clearly demonstrate that the reference compounds used to estimate the SE for highly substituted small ring cyclic compounds should reflect their molecular architecture having the same substitutents on carbon.     

-Fluoro decalones as chiral epoxidation catalysts: fluorine effect

Three rigid monofluorinated trans-decalones 4a, 5e, and 6e (90% ee) have been synthesized from commercially available (−)-(R)-methyl naphthalenone (90% ee). Their structures have been fully characterized (NMR, X-ray): ketones 4a and 5e are Me,F-disubstituted to the carbonyl with the fluorine axial and equatorial, respectively, while ketone 6e is F-monosubstituted to the carbonyl with the fluorine equatorial. The use of these ketones as chiral catalysts for the epoxidation of trans-olefins (such as stilbene, β-methylstyrene and p-methoxy cinnamate) through the formation of dioxiranes shows (i) that dioxiranes with an equatorial fluorine to the dioxirane ring are less reactive and provide lower ee’s than dioxiranes with an axial fluorine and having the same chirality and (ii) that an axial methyl to the dioxirane ring is significantly less efficient than a fluorine. The results corroborate Armstrong and Houk’s theoretical model and our first hypothesis to rationalize the inverted enantioselectivities observed using -fluorinated cyclohexanones having the same chirality, i.e.: rapid ring inversion (Curtin–Hammett principle) allows the dioxirane conformation to have the fluorine axial (even if less populated than the other) to contribute significantly to the epoxidation reaction.     

A practical procedure for the large-scale preparation of methyl (2R,3S)-3-(4-methoxyphenyl)glycidate,a key intermediate for diltiazem

A practical synthesis of methyl (2R,3S)-3-(4-methoxyphenyl)glycidate (-)-2, a key intermediate for diltiazem (1), was developed. Treatment of methyl (E)-4-methoxycinnamate 3 with chiral dioxirane, generated from chiral ketone 4, provided (-)-2 in 77% ee and 89% yield. The crude mixture of (-)-2 and 4 was efficiently separated by the use of novel and simple equipment performing a lipase-catalyzed transesterification and a continuous dissolution and crystallization to furnish the optically pure (-)-2 and recovery of 4 in 74% and 91% yield, respectively.     

Continued Progress towards Efficient Functionalization of Natural and Non-natural Targets under Mild Conditions: Oxygenation by C−H Bond Activation with Dioxirane

The successful isolation and characterization of a dioxirane species in 1988 opened up one of the most attractive methods for the efficient oxidation of simple and/or structurally complex molecules. Dioxirane today rank among the most powerful tools in organic chemistry, with numerous applications in commercially important processes. They were quickly recognized as efficient oxygen transfer agents, especially for epoxidations and for a wide range of O-insertion reactions into C−H bonds. Dioxirane possess catalytic activity and appear as highly (chemo-, regio-, and stereo-) selective oxidants, despite their reactivity under mild and strictly neutral conditions being controlled by a combination of steric and electronic factors. In this review, we discuss some of the most recent and significant developments in the selective homogeneous and heterogeneous oxyfunctionalization of non-activated C−H bonds in hydrocarbons of natural and non-natural targets by using isolated dioxirane or, more generally, by using the ketones (i.e., the dioxirane precursors) as organocatalysts.     

Dimesitylketone O-oxide: spectroscopic characterization, conformation, and reaction modes: OH formation and OH capture.

Dimesitylketone O-oxide 1b was synthesized by photolysis of dimesityldiazomethane dissolved in an oxygen saturated CCl3F solution at 140 K. Conformation and geometry of 1b were determined by comparing measured NMR chemical shifts with the corresponding chemical shifts calculated at the DFT-IGLO level of theory where it had to be considered that the molecule exists in two enantiomeric forms. Measured and calculated 1H chemical shifts agree within 0.1 ppm while the calculated 13C shift of the COO carbon (210.6 ppm) differs by only 0.4 ppm from the measured shift of 211.0 ppm. The two mesityl rings are perpendicular to each other and enclose angles of 40 and 57 degrees with the COO plane. The preferred rearrangement process of 1b is an H migration from one of the ortho-methyl groups to the terminal O atom of the COO unit. The calculated activation enthalpy of this process is 12.7 kcal/mol (B3LYP/cc-pVTZ). In contrast, the activation enthalpy for isomerization to dioxirane is 5 kcal/mol higher. In CCl3F, the activation barrier for the thermal decay was determined to be 13.8 +/- 0.2 kcal/mol and in acetonitrile 13.1 +/- 0.4 kcal/mol. H migration initiates cleavage of the OO bond and the production of an OH and a benzyl radical. Recombination of the latter in the solvent cage leads to the formation of 2-methylhydroxy-pentamethylbenzophenone, while escape of the OH radical from the solvent cage yields a ketone. These results confirm the possibility of OH production from carbonyl oxides in the solution phase.     

Inokosterone, an insect metamorphosing substance from Achyranthes fauriei : Absolute configuration and synthesis

Inokosterone, a phytoecdysone isolated from Achyranthes fauriei (Amaranthaceae), has been partially acetylated to give the 2,26-diacetate (4) which has been converted into methyl 5 - acetoxy - 4 - methylpentanoate (7), showing no apparent []_D, and 2β - acetoxy - 3β,14 - dihydroxy - 5β - pregn - 7 - ene - 6,20 - dione (8). Chemical and physiochemical studies have shown the configurations at C-20 and C-22 to be R. Inokosterone has thus been concluded to be a mixture of C-25 epimers of (20R,22R) - 2β,3β,14,20,22,26 - hexahydroxy - 5β - cholest - 7 - en - 6 - one (1). After the synthesis of the model compound, a C-25 epimeric mixture of (20R,22R) - 3β,20,22,26 - tetrahydroxy - 5 - cholestane (23), inokosterone has been synthesized via (20R) - 2β,3β,14,20 - tetrahydroxy - 20 - formyl - 5β - pregn - 7 - en - 6 - one (25) by Grignard reaction with 4 - (tetrahydrofuran - 2 - yloxy) - 3 - methylbutynylmagnesium bromide (15) followed by hydrogenation and hydrolysis. The use of an NMR shift reagent with the inokosterone acetates (9, 29) and the optical activity measurement of - methylglutaric acid (3) derived from inokosterone have established that inokosterone is a 1:2 mixture of the C-25 R and S epimers.     

Mechanism of the oxidation of sulfides by dioxiranes: conformational mobility and transannular interaction in the oxidation of thianthrene 5-oxide

The detailed study of the oxidation of thianthrene 5-oxide (1) with methyl(trifluoromethyl)dioxirane (5b) in different solvents and in the presence of (18)O isotopic tracers is reported. Thianthrene 5-oxide (1) is a flexible molecule in solution, and this property allows for transannular interaction of the sulfoxide group with the expected zwitterionic 7 and hypervalent 10-S-4 sulfurane 9 intermediates formed in the oxidation and biases the course of the reaction toward the monooxygenation pathway.     

Absolute structure of panaxytriol

Diastereomeric mixture at C-3 of (9R,10R)-panaxytriol acetonide (3) and (9S,10S)-panaxytriol acetonide (4) were enantioselectively acetylated to give (3R)-acetates (3a-Ac, 4a-Ac) and (3S)-alcohols (3b, 4b) by enzyme mediated-acetylation using CHIRAZYME and vinyl acetate, respectively. Hydrolysis of (3R)-acetate (3a-Ac, 4a-Ac) with CHIRAZYME and phosphate buffer afforded (3R)-alcohols (3a, 4a), respectively. Deprotection of panaxytriol acetonides (3a, 3b, 4a, 4b) gave panaxatriol and its isomers, respectively. Comparison of optical rotation values of the synthetic panaxatriols with that of the natural one confirmed that the absolute configuration of panaxytriol sould be 3R,9R,10R.