Alkylation of Amines with Alcohols and Amines by a Single Catalyst under Mild Conditions

An efficient catalytic system for the alkylation of amines with either alcohols or amines under mild conditions has been developed, using cyclometallated iridium complexes as catalysts. The method has broad substrate scope, allowing for the synthesis of a diverse range of secondary and tertiary amines with good to excellent yields. By controlling the ratio of substrates, both mono‐ and bis‐alkylated amines can be obtained with high selectivity. In particular, methanol can be used as the alkylating reagent, affording N‐methylated products selectively. A strong solvent effect is observed for the reaction.     

Colloid and nanodimensional catalysts in organic synthesis: III. Alkylation of amines with primary alcohols catalyzed by colloidal nickel and cobalt

Alkylation of primary amines with primary alcohols has been performed under catalysis by colloidal nickel and cobalt particles. The synthesis of the catalyst and alkylation of amines have been carried out in a one-pot mode. The alkylation at 160–180°C in 6–12 h yields 55–90% of secondary amines.     

Impregnated ruthenium on magnetite as a recyclable catalyst for the N-alkylation of amines, sulfonamides, sulfinamides, and nitroarenes using alcohols as electrophiles by a hydrogen autotransfer process

Various impregnated metallic salts on magnetite have been prepared, including cobalt, nickel, copper, ruthenium, and palladium salts, as well as a bimetallic palladium-copper derivative. Impregnated ruthenium catalyst is a versatile, inexpensive, and simple system for the selective N-monoalkylation of amino derivatives with poor nucleophilic character, such as aromatic and heteroaromatic amines, sulfonamides, sulfinamides, and nitroarenes, using in all cases alcohols as the initial source of the electrophile, through a hydrogen autotransfer process. In the case of sulfinamides, this is the first time that these amino compounds have been alkylated following this strategy, allowing the use of chiral sulfinamides and secondary alcohols to give the alkylated compound with a diastereomeric ratio of 92:8. In these cases, after alkylation, a simple acid deprotection gave the expected primary amines in good yields. The ruthenium catalyst is quite sensitive, and small modifications of the reaction medium can change the final product. The alkylation of amines using potassium hydroxide renders the N-monoalkylated amines, and the same protocol using sodium hydroxide yields the related imines. The catalyst can be easily removed by a simple magnet and can be reused up to ten times, showing the same activity.     

Chromium-Catalyzed Alkylation of Amines by Alcohols

The alkylation of amines by alcohols is a broadly applicable, sustainable, and selective method for the synthesis of alkyl amines, which are important bulk and fine chemicals, pharmaceuticals, and agrochemicals. We show that Cr complexes can catalyze this C−N bond formation reaction. We synthesized and isolated 35 examples of alkylated amines, including 13 previously undisclosed products, and the use of amino alcohols as alkylating agents was demonstrated. The catalyst tolerates numerous functional groups, including hydrogenation-sensitive examples. Compared to many other alcohol-based amine alkylation methods, where a stoichiometric amount of base is required, our Cr-based catalyst system gives yields higher than 90 % for various alkyl amines with a catalytic amount of base. Our study indicates that Cr complexes can catalyze borrowing hydrogen or hydrogen autotransfer reactions and could thus be an alternative to Fe, Co, and Mn, or noble metals in (de)hydrogenation catalysis.     

Pd.Et3B-catalyzed alkylation of amines with allylic alcohols

A combination of catalytic amounts of Pd (0.05 mmol) and Et3B (0.3 mmol) promotes allylic alkylation of primary and secondary aromatic and aliphatic amines (1.0 mmol) by the direct use of allylic alcohols, providing tertiary amines in excellent yields under mild conditions (room temperature approximately 50 degrees C).     

Chromium‐Catalyzed Alkylation of Amines by Alcohols

The alkylation of amines by alcohols is a broadly applicable, sustainable, and selective method for the synthesis of alkyl amines, which are important bulk and fine chemicals, pharmaceuticals, and agrochemicals. We show that Cr complexes can catalyze this C?N bond formation reaction. We synthesized and isolated 35 examples of alkylated amines, including 13 previously undisclosed products, and the use of amino alcohols as alkylating agents was demonstrated. The catalyst tolerates numerous functional groups, including hydrogenation‐sensitive examples. Compared to many other alcohol‐based amine alkylation methods, where a stoichiometric amount of base is required, our Cr‐based catalyst system gives yields higher than 90 % for various alkyl amines with a catalytic amount of base. Our study indicates that Cr complexes can catalyze borrowing hydrogen or hydrogen autotransfer reactions and could thus be an alternative to Fe, Co, and Mn, or noble metals in (de)hydrogenation catalysis.     

Development of a General Non‐Noble Metal Catalyst for the Benign Amination of Alcohols with Amines and Ammonia

The N‐alkylation of amines or ammonia with alcohols is a valuable route for the synthesis of N‐alkyl amines. However, as a potentially clean and economic choice for N‐alkyl amine synthesis, non‐noble metal catalysts with high activity and good selectivity are rarely reported. Normally, they are severely limited due to low activity and poor generality. Herein, a simple NiCuFeO_x catalyst was designed and prepared for the N‐alkylation of ammonia or amines with alcohol or primary amines. N‐alkyl amines with various structures were successfully synthesized in moderate to excellent yields in the absence of organic ligands and bases. Typically, primary amines could be efficiently transformed into secondary amines and N‐heterocyclic compounds, and secondary amines could be N‐alkylated to synthesize tertiary amines. Note that primary and secondary amines could be produced through a one‐pot reaction of ammonia and alcohols. In addition to excellent catalytic performance, the catalyst itself possesses outstanding superiority, that is, it is air and moisture stable. Moreover, the magnetic property of this catalyst makes it easily separable from the reaction mixture and it could be recovered and reused for several runs without obvious deactivation.     

An efficient conversion of nitroaromatics and aromatic amines to tertiary amines in one-pot way

Reductive alkylation and reductive methylation of aromatic primary amines with carbonyls and 37% formaldehyde using decaborane in one-pot way gave the corresponding tertiary amines in high yields. The reaction condition was extended for the reduction of nitroaromatic using decaborane and Pd/C followed by the reductive alkylation and reductive methylation using decaborane to give the corresponding tertiary amines in high yields.     

The “Borrowing Hydrogen Strategy” by Supported Ruthenium Hydroxide Catalysts: Synthetic Scope of Symmetrically and Unsymmetrically Substituted Amines

The N‐alkylation of ammonia (or its surrogates, such as urea, NH₄HCO₃, and (NH₄)₂CO₃) and amines with alcohols, including primary and secondary alcohols, was efficiently promoted under anaerobic conditions by the easily prepared and inexpensive supported ruthenium hydroxide catalyst Ru(OH)_x/TiO₂. Various types of symmetrically and unsymmetrically substituted “tertiary” amines could be synthesized by the N‐alkylation of ammonia (or its surrogates) and amines with “primary” alcohols. On the other hand, the N‐alkylation of ammonia surrogates (i.e., urea and NH₄HCO₃) with “secondary” alcohols selectively produced the corresponding symmetrically substituted “secondary” amines, even in the presence of excess amounts of alcohols, which is likely due to the steric hindrance of the secondary alcohols and/or secondary amines produced. Under aerobic conditions, nitriles could be synthesized directly from alcohols and ammonia surrogates. The observed catalysis for the present N‐alkylation reactions was intrinsically heterogeneous, and the retrieved catalyst could be reused without any significant loss of catalytic performance. The present catalytic transformation would proceed through consecutive N‐alkylation reactions, in which alcohols act as alkylating reagents. On the basis of deuterium‐labeling experiments, the formation of the ruthenium dihydride species is suggested during the N‐alkylation reactions.     

Highly efficient synthesis of α-amino amidines from ynamides by the Cu-catalyzed three-component coupling reactions

Using ynamides as one of the reacting components, the Cu-catalyzed three-component reaction of sulfonyl or phosphoryl azides and amines affords α-amino amidines in high yields under mild conditions. Synthetic utility of the produced compounds was demonstrated in the diastereoselective alkylation of α-amino amidines bearing a chiral oxazolidinone moiety. It was also shown that α-amino imidates could be readily prepared by employing alcohols instead of amines.     

Nickel‐Catalyzed N‐Alkylation of Acylhydrazines and Arylamines Using Alcohols and Enantioselective Examples

A borrowing‐hydrogen reaction between amines and alcohols is an atom‐economic way to prepare alkylamines, ideally with water as the sole byproduct. Herein, nickel catalysts are used for direct N‐alkylation of hydrazides and arylamines using racemic alcohols. Moreover, a nickel catalyst of (S )‐binapine was used for an asymmetric N‐alkylation of benzohydrazide with racemic benzylic alcohols.     

Approach to a better understanding and modelling of β-pyrrolidinoalcohol ligands for enantioselective alkylation

A series of pyrrolidine-based β-amino alcohols derived from malic acid, citramalic acid and pantolactone with primary amines was prepared and their activity as chiral ligands in the enantioselective alkylation of benzaldehyde using diethylzinc was studied.     

Palladium‐Catalyzed N‐Alkylation of Amides and Amines with Alcohols Employing the Aerobic Relay Race Methodology

Possibly because homogeneous palladium catalysts are not typical borrowing hydrogen catalysts and ligands are thus ineffective in catalyst activation under conventional anaerobic conditions, they had not been used in the N‐alkylation reactions of amines/amides with alcohols in the past. By employing the aerobic relay race methodology with Pd‐catalyzed aerobic alcohol oxidation being a more effective protocol for alcohol activation, ligand‐free homogeneous palladiums are successfully used as active catalysts in the dehydrative N‐alkylation reactions, giving high yields and selectivities of the alkylated amides and amines. Mechanistic studies implied that the reaction most probably proceeds via the novel relay race mechanism we recently discovered and proposed.     

Direct N-alkylation of amines with alcohols using AlCl3 as a Lewis acid

A substitution reaction of amines with alcohols for N-alkylated amines has been developed using inexpensive AlCl_3 without any ligand or additive.Either aromatic or aliphatic amines and primary or secondary alcohols perform the AlCl_3-mediated reaction smoothly to afford various N-alkylated amines in satisfactory yields.     

Ritter Reaction with Cyclopropyl Ketones and Cyclopropyl Alcohols: Synthesis of N-Actyl- γ-Keto and N-Acyl Hohoallyl Amines

A variety of conjugated cyclopropyl ketones and cyclopropylcarbinyl alcohols were reacted with two nitriles viz. CH₃ CN and CH₂[dbnd]CH-CN in presence of cone. H₂ SO₄. It was found that with appropriate substitutions cyclopropyl ketones gave N-Acyl-γ-keto amines whereas cyclopropylcarbinyl alcohols gave the corresponding N-Acyl homoallylic amines in reasonably good yields. The olefins obtained had E-stereo-chemistry. With bicyclic cyclopropylcarbinyl alcohols the ring expanded products were formed. A plausible rationale is provided to account for these observations     

O‐Alkylation of Pyridine Aldo‐ and Ketoximes with Dihalohydrins under Phase‐Transfer Conditions

Phase‐transfer‐catalyzed alkylation of (E)‐pyridine aldo‐ and (E)‐ketoximes with dihalohydrins in the benzene (or DMSO)/10% aq. NaOH system in the presence of tetradecylammonium bromide proceeds regiospecifically to afford the corresponding O‐halohydrins in good yields. In this study, first O‐halohydrin derivatives were converted into glycidyl ether derivatives, and then a new series of amino alcohols were synthesized by the condensation of amines with these glycidyl ethers.     

Cyclometalated palladium pre-catalyst for N-alkylation of amines using alcohols and regioselective alkylation of sulfanilamide using aryl alcohols

Simple pyrazole based palladacycle-phosphine with a high turnover has been developed and applied for the N-alkylation of amines and sulfanilamide using alcohols as substrates by hydrogen borrowing strategy. N-alkylation of primary and secondary amines resulted in high isolated yields at 100–130 °C, under solvent free conditions. More challenging secondary aliphatic as well as aromatic alcohols were also successfully utilized as alkylating agents under similar reaction conditions. The turn over number reached up to 43000 for N-benzylation of aniline using benzyl alcohol. Notably, regioselective N-alkylation of 2-aminobenzothiazole and 4-aminobenzenesulfonamide to the corresponding 2-N-(alkylamino)azoles and 4-amino-(N-alkyl)benzenesulfonamides using alcohols as alkylating agents have been achieved using our new pre-catalyst-phosphine system.     

Synthesis, structure, properties and immobilization on a gold surface of the monoribbed-functionalized tris-dioximate cobalt(II) clathrochelates and an electrocatalytic hydrogen production from H+ ions

The cycloaddition of the mono- and dichloroglyoximes to the cobalt(II) bis-α-benzyldioximate afforded the cobalt(II) mono- and dichloroclathrochelates in moderate yields (40-60%). These complexes undergo nucleophilic substitution of their reactive chlorine atoms with aliphatic amines, alcohols and thiolate anions. In the case of ethylenediamine and 1,2-ethanedithiol, only the macrobicyclic products with α,α'-N(2)- and α,α'-S(2)-alicyclic six-numbered ribbed fragments were obtained. The cobalt(II) cage complexes with terminal mercapto groups were synthesized using aliphatic dithiols. The crystal and molecular structures of the six cobalt(II) clathrochelates were obtained by X-ray diffraction. Their CoN(6)-coordination polyhedra possess a geometry intermediate between a trigonal prism and a trigonal antiprism, and the encapsulated cobalt(II) ions are shifted from their centres due to the structural Jahn-Teller effect with the Co-N distances varying significantly (by 0.10-0.26 ?). The electrochemistry of the complexes obtained was studied by cyclic voltammetry (CV). The anodic waves correspond to the quasi-reversible Co(2+/3+) oxidations, whereas the cathodic ranges contain the quasi-reversibile waves assigned to the Co(2+/+) reductions; all the cobalt(i)-containing clathrochelate anions formed are stable in the CV time scale. The electrocatalytic properties of the cobalt complexes obtained were studied in the production of hydrogen from H(+) ions: the addition of HClO(4) resulted in the formation of the same catalytic cathodic reduction Co(2+/+) waves. The controlled-potential electrolysis with gas chromatography analysis confirmed the production of H(2) in high Faraday yields. The efficiency of this electrocatalytic process was enhanced by an immobilization of the complexes with terminal mercapto groups on a surface of the working gold electrode.     

Parallel supported synthesis of polyamine-imidazole conjugates

[reaction: see text] A small collection of nine polyamine-imidazole conjugates, potentially acting as RNases A mimics, has been synthesized on SynPhase lanterns using amino alcohols and diamines as building blocks. Couplings were performed via S(N)2 alkylation of methanesulfonates with amines. The final introduction of N-4-nitrobenzyloxycarbonyldiamines allowed easy purification of the cleaved compounds.     

Preparation of bis(beta-trimethylsilylethanesulfonyl)imide and its use in the synthesis of protected amine derivatives

Bis(beta-trimethylsilylethanesulfonyl)imide (SES(2)NH) can be easily prepared in 85% yield by alkylation of the trianion of bismethanesulfonimide with 2 equiv of commerically available (iodomethyl)trimethylsilane. This synthon undergoes effective Mitsunobu alkylation reactions with both primary and secondary alcohols to afford the corresponding bis-SES imides. These imides can be selectively cleaved to the mono-SES-protected amines, and in addition undergo a one-pot cleavage/N-alkylation to afford SES derivatives of secondary amines.