Formation and structural characterization of mercury complexes from Te(R)CH2SiMe3 (R = Ph, CH2SiMe3) and HgCl2

The reaction of HgCl₂ and Te(R)CH₂SiMe₃ [R = CH₂SiMe₃ (1), Ph (2)] in ethanol yielded a mononuclear complex [HgCl₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 3a; R = CH₂SiMe₃, 3b). The recrystallization of 3a or 3b from CH₂Cl₂ produced a dinuclear complex [Hg₂Cl₂(μ-Cl)₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 4a; R = CH₂SiMe₃, 4b). When 3a was dissolved in CH₂Cl₂, the solvent quickly removed, and the solid recrystallized from EtOH, a stable ionic [HgCl{Te(Ph)CH₂SiMe₃}₃]Cl·2EtOH (5a·2EtOH) was obtained. Crystals of [HgCl₂{Te(CH₂SiMe)₂}]·2HgCl₂·CH₂Cl₂ (6b·2HgCl₂·CH₂Cl₂) were obtained from the CH₂Cl₂ solution of 3b upon prolonged standing. The complex formation was monitored by ¹²⁵Te-, and ¹⁹⁹Hg NMR spectroscopy, and the crystal structures of the complexes were determined by single crystal X-ray crystallography.     

New stable germylenes, stannylenes, and related compounds: 6. Heteroleptic germanium(II) and tin(II) compounds [(SiMe3)2N-E-OCH2CH2NMe2]n (E = Ge, n = 1; Sn, n = 2): synthesis and structure

New stable heteroleptic germanium(II) and tin(II) compounds [(SiMe₃)₂N-E¹⁴-OCH₂CH₂NMe₂]_n (E¹⁴ = Ge, n = 1 (1), Sn, n = 2 (2)) have been synthesized and their crystal structures have been determined by X-ray diffraction analysis. While compound 1 is monomer stabilized by intramolecular Ge ← N coordination, compound 2 is associated to dimer via intermolecular dative Sn ← O interactions.     

Aqueous syntheses of [(Cp-R)M(CO)3] type complexes (Cp = cyclopentadienyl, M = Mn, Tc, Re) with bioactive functionalities

We describe reactions of [^99mTc(H₂O)₃(CO)₃)]⁺ (1) with Diels-Alder products of cyclopentadiene such as “Thiele’s acid” (HCp-COOH)₂ (2) and derivatives thereof in which the corresponding [(Cp-COOH)^99mTc(CO)₃)] (3) complex did form in water. We propose a metal mediated Diels-Alder reaction mechanism. To show that this reaction was not limited to carboxylate groups, we synthesized conjugates of 2 (HCp-CONHR)₂ (4a-c) (4a, R = benzyl amine; 4b, R = N_α-Boc-l-2,3-diaminopropionic acid and 4c, R = glycine). The corresponding ^99mTc complexes [(4a)^99mTc(CO)₃)] 6a, [(4b)^99mTc(CO)₃)] 6b and [(4c)^99mTc(CO)₃)] 6c have been prepared along the same route as for Thiele’s acid in aqueous media demonstrating the general applicability of this synthetic strategy. The authenticity of the ^99mTc complexes on the no carrier added level have been confirmed by chromatographic comparison with the structurally characterized manganese or rhenium complexes.Studies of the reaction of 1 with Thiele’s acid bound to a solid phase resin demonstrated the formation of [(Cp-COOH)^99mTc(CO)₃)] 3 in a heterogeneous reaction. This is the first evidence for the formation of no carrier added ^99mTc radiopharmaceuticals containing cyclopentadienyl ligands via solid phase syntheses. Macroscopically, the manganese analogue 5a and the rhenium complexes 5b-c have been prepared and characterized by IR, NMR, ESI-MS and X-ray crystallography for 5a (monoclinic, P2₁/c, a = 9.8696(2) Å, b = 25.8533(4) Å, c = 11.8414(2) Å, β = 98.7322(17)°) in order to unambiguously assign the authenticity of the corresponding ^99mTc complexes.     

Synthesis and characterization of metal diselenophosphates: M[Se2P(OR)2]2 (M = Pd,Pt; R = Et,Pr, Pr)

The first Pd(II) and Pt(II) complexes incorporating diselenophosphate (dsep) ligands are presented. Treatment of M(II) (M = Pd, Pt) salts with two equivalents of the dsep ligand in CH₂Cl₂ yielded square-planar compounds of the type M[Se₂P(OR)₂]₂ (M = Pd, Pt; R = Et, ⁱPr, ⁿPr) (1a–2c). These complexes were characterized by elemental analysis, multinuclear NMR spectroscopy and X-ray diffraction (1b and 2b). The dsep ligands coordinate to the metal in an approximately isobidentate fashion and form four-membered Se–P–Se–M chelate rings. Structural elucidations indicated that minute differences exist in the M–Se bond distances and these were observed from solution ³¹P NMR studies, which exhibited two sets of satellites arising from one-bond coupling to ⁷⁷Se nuclei. A packing diagram showed a chain-like motif which was composed of square-planar M[Se₂P(OR)₂]₂ units and occurred via non-covalent Se?Se secondary interactions.     

Functionalized cyclodiphosphazanes cis-[BuNP(OR)]2 (R=C6H4OMe-o, CH2CH2OMe, CH2CH2SMe, CH2CH2NMe2) as neutral 2e, 4e or 8e donor ligands

Cyclodiphosphazanes having donor functionalities such as cis-[^tBuNP(OR)]₂ (R = C₆H₄OMe-o (2); R = CH₂CH₂OMe (3); R = CH₂CH₂SMe (4); R = CH₂CH₂NMe₂ (5)) were obtained in good yield by reacting cis-[^tBuNPCl]₂ (1) with corresponding nucleophiles. The reactions of 2-5 with [RuCl₂(η⁶-cymene)]₂, [MCl(COD)]₂ (M = Rh, Ir), [PdCl₂(PEt₃)]₂ and [MCl₂(COD)] (M=Pd, Pt) result in the formation of exclusively monocoordinated mononuclear complexes of the type cis-[{^tBuNP(OR)}₂ML_n-κP] irrespective of the reaction stoichiometry and the reaction conditions. In contrast, 2-5 react with [RhCl(CO)₂]₂, [PdCl(η³-C₃H₅)]₂, CuX (X=Cl, Br, I) to give homobinuclear complexes. Interestingly, CuX produces both mono and binuclear complexes depending on the stoichiometry of the reactants and the reaction conditions. The mononuclear complexes on treatment with appropriate metal reagents furnish heterometallic complexes.     

Syntheses, crystal structures and DFT studies of [Me3EM(CO)5] (E = Sb, Bi; M = Cr, W), cis-[(Me3Sb)2Mo(CO)4], and [Bu3BiFe(CO)4]

Syntheses of [Me₃SbM(CO)₅] [M = Cr (1), W (2)], [Me₃BiM(CO)₅] [M = Cr (3), W (4)], cis-[(Me₃Sb)₂Mo(CO)₄] (5), [^tBu₃BiFe(CO)₄] (6), crystal structures of 1-6 and DFT studies of 1-4 are reported.     

New versatile organyltellurium(IV) halides: Synthesis and X-ray structural features of the telluronium tellurolate salts [PhTe(CH3)2]2[TeX6] (X = Cl, Br) and [Ph3Te][PhTeX4] (X = Cl, Br, I)

TeX₄ (X = Cl, Br) react in HCl/HBr with [Ph(CH₃)₂Te]X (X = Cl, Br) to give [PhTe(CH₃)₂]₂[TeCl₆] (1) and [PhTe(CH₃)₂]₂[TeBr₆] (2). The reaction of PhTeX₃ (X = Cl, Br, I) in cooled methanol with [(Ph)₃Te]X (X = Cl, Br, I) leads to [Ph₃Te][PhTeCl₄] (3), [Ph₃Te][PhTeBr₄] (4) and [Ph₃Te][PhTeI₄] (5). In the lattices of the telluronium tellurolate salts 1 and 2, octahedral TeCl₆ and TeBr₆ dianions are linked by telluronium cations through Te?Cl and Te?Br secondary bonds, attaining bidimensional (1) and three-dimensional (2) assemblies. The complexes 3, 4 and 5 show two kinds of Te?halogen secondary interactions: the anion-anion interactions, which form centrosymmetric dimers, and two identical sets of three telluronium-tellurolate interactions, which accomplish the centrosymmetric fundamental moiety of the supramolecular arrays of the three compounds, with the tellurium atoms attaining distorted octahedral geometries. Also phenyl C-H?halogen secondary interactions are structure forming forces in the crystalline structures of compounds 3, 4 and 5.     

Preparation, crystal structures, EPR and reflectance spectra of two new charge-transfer salts, [CpFeCpCH2N(CH3)3]4[XMo12O40] · nCH3CN (n = 0 for X = P or n = 1 for X = Ge)

Two new charge-transfer salts, [CpFeCpCH₂N(CH₃)₃]₄[PMo₁₂O₄₀] · CH₃CN (1) and [CpFeCpCH₂N(CH₃)₃]₄[GeMo₁₂O₄₀] (2), were synthesized by the traditional solution synthetic method and their structures were determined by single-crystal X-ray analysis. Salt 1 belongs to the triclinic space group P1, and salt 2 belongs to the triclinic space group . There exist the complex interactions of the cationic ferrocenyl donor and Keggin polyanion in the solid state. The solid state UV-Vis diffuse reflectance spectra indicate the presence of a charge-transfer band climbing from 450 nm to well beyond 900 nm for 1, a charge-transfer band from 460 to 850 nm with λ_max = 630 nm for 2.The EPR spectra of salts 1 and 2 at 77 K show a signal at g = 2.0048 and 1.9501, respectively, ascribed to the delocalization of one electron in reduced Keggin ion in salt 1 and the Mo^VI in [GeMo₁₂O₄₀]⁴⁻ is partly reduced to Mo^V owing to the charge-transfer transitions taking place between the ferrocenyl donors and the POM acceptors. The two compounds were also characterized by IR spectroscopy and cyclic voltammetry.     

Quantum chemical study of ethylene addition to group-7 oxo complexes MO2(CH3)(CH2) (M = Mn, Tc, Re)

Quantum chemical calculations using DFT at the B3LYP level have been carried out for the reaction of ethylene with the group-7 compounds ReO₂(CH₃)(CH₂) (Re1), TcO₂(CH₃)(CH₂) (Tc1) and MnO₂(CH₃)(CH₂) (Mn1). The calculations suggest rather complex scenarios with numerous pathways, where the initial compounds Re1-Mn1 may either engage in cycloaddition reactions or numerous addition reactions with concomitant hydrogen migration. There are also energetically low-lying rearrangements of the starting compounds to isomers which may react with ethylene yielding further products. The [2 + 2]_Re,C cycloaddition reaction of the starting molecule Re1 is kinetically and thermodynamically favored over the [3 + 2]_C,O and [3 + 2]_O,O cycloadditions. However, the reaction which leads to the most stable product takes place with initial rearrangement to the dioxohydridometallacyclopropane isomer Re1a that adds ethylene with concomitant hydrogen migration yielding Re1a-1. The latter reaction has a slightly higher barrier than the [2 + 2]_Re,C cycloaddition reaction. The direct [3 + 2]_C,O cycloaddition becomes more favorable than the [2 + 2]_M,C reaction for the starting compounds Tc1 and Mn1 of the lighter metals technetium and manganese but the calculations predict that other reactions are kinetically and thermodynamically more favorable than the cycloadditions. The reactions with the lowest activation barriers lead after rearrangement to the ethyl substituted dioxometallacyclopropanes Tc1a-1 and Mn1a-1. The manganese compound exhibits an even more complex reaction scenario than the technetium compounds. The thermodynamically most stable final product of ethylene addition to Mn1 is the ethoxy substituted metallacyclopropane Mn1a-2 which has, however, a high activation barrier.     

Crystal structure and spectral characterization of hexanuclear oxo titanium(IV) clusters: [Ti6O6(OSi(CH3)3)6(OOCR)6] (R = Bu,CH2Bu,C(CH3)2Et)

Hexanuclear oxo titanium(IV) siloxo carboxylate complexes with the general formula [Ti₆O₆(OSi(CH₃)₃)₆(OOCR)₆] (R = Bu^t (1), CH₂Bu^t (2), C(CH₃)₂Et (3)) were synthesized in quantitative yield, by the reaction of Ti(OSiMe₃)₄ with the appropriate organic acid. Crystal structure determination revealed that molecules of 1–3 are composed of [Ti₆-(μ₃-O)₆] cores stabilized by six syn–syn carboxylato bridges and six terminal siloxide ligands. Each metal atom is surrounded by six oxo atoms, capping the triangular faces of the distorted octahedron. Spectral characterization (IR, NMR) of 1–3 revealed a significant non-equivalence of the carboxylate group interactions, resulting from the asymmetry of the Ti-μ-OOC bonds of the syn–syn bridges. The thermal stability of the studied compounds was determined from TGA/DTA analysis.     

Synthesis and coordinating properties of the facultative Sb2O- and As2O-donor ligands O{(CH2)2ER2}2 (E = Sb or As; R = Ph or Me)

The new mixed Sb₂O-donor ligands O{(CH₂)₂SbR₂}₂ (R = Ph, 1; R = Me, 2) with flexible backbones have been prepared in good yields as air-sensitive oils from reaction of NaSbR₂ with 0.5 mol equivalents of O(CH₂CH₂Br)₂ in thf solution. The As₂O-donor analogues, O{(CH₂)₂AsR₂}₂ (R = Ph, 3; R = Me, 4) were obtained similarly from LiAsPh₂ or NaAsMe₂, respectively and O(CH₂CH₂Br)₂, although ligand 4 appears to be considerably less stable with respect to C-O bond fission under some conditions than the other ligands. Using O(CH₂CH₂Cl)₂ leads only to partial substitution by the SbPh₂⁻ or AsPh₂⁻ nucleophile. These ligands behave as bidentate chelating Sb₂- or As₂-donors in the distorted tetrahedral [M(L-L)₂]BF₄ (M = Cu or Ag; L-L = 1-4) on the basis of solution ¹H and ⁶³Cu NMR spectroscopic studies, mass spectrometry and microanalyses. Crystal structures of three representative examples with Cu(I) and Ag(I) confirm the distorted tetrahedral Sb₄ or As₄ coordination at the metal and allow comparisons of geometric parameters. The crystallographic identification of an unexpected Cu(I)-Cu(I) complex, [Cu₂{Me₂As(CH₂)₂OH}₃](BF₄)₂, obtained as a by-product via C-O bond fission within ligand 4 is also reported. The distorted octahedral [RhCl₂(L-L)₂]Cl and the distorted square planar cis-[PtCl₂(L-L)] (L-L = 1 or 2) are also described. The ether O atoms are not involved in coordination to the metal ion in any of the late transition metal complexes isolated.     

Synthesis, structures and preliminary biological screening of bis(diphenyl)chlorotin complexes and adducts: Ph2ClSn-CH2-R-CH2-SnClPh2, R = p-C6H4, CH2CH2

The reaction between ClCH₂-R-CH₂Cl, R = p-C₆H₄, and [Ph₃Sn]⁻Li⁺ yields Ph₃Sn-CH₂-R-CH₂-SnPh₃ (1) in high yield. The related known compound R = CH₂CH₂ (1a) is synthesized by the reaction of the di-Grignard reagent BrMg(CH₂)₄MgBr with two equivalents of Ph₃SnCl. Cleavage of a single Sn-Ph group at each tin centre of both compounds using HCl/Et₂O yields the corresponding bis-chlorostannanes Ph₂ClSn-CH₂-R-CH₂-SnClPh₂, R = (CH₂)₄ (2) and R = C₆H₄ (3), respectively. Compounds 1, 2 and 3 are crystalline solid materials and their single crystal X-ray structures are reported. In the solid state both 2 and 3 form self-assembled ladder structures involving alternating intermolecular Cl-Sn?Cl and Cl?Sn-Cl bonded chains at both ends of the distannanes with 5-coordinate tin atoms. Recrystallization of 3 from CH₂Cl₂ in the presence of DMF yields the bis-DMF adduct (4) in which no self-assembled structures were noted. Evaluation of the chlorostannanes 2 and 3 against a suite of bacteria, Staphylococcus aureus, Escherichia coli and Photobacterium phosphoreum is reported and compared to the related mono-chlorostannanes Ph₂(CH₃)SnCl and Ph₂(PhCH₂)SnCl.     

Oxime-substituted NCN-pincer palladium and platinum halide polymers through non-covalent hydrogen bonding (NCN = [C6H2(CH2NMe2)2-2,6])

The oxime-substituted NCN-pincer molecules HONCH-1-C₆H₃(CH₂NMe₂)₂-3,5 (2a) and HONCH-4-C₆H₂(CH₂NMe₂)₂-2,6-Br-1 (2b) were accessible by treatment of the benzaldehydes H(O)C-4-C₆H₃(CH₂NMe₂)₂-3,5 (1a) and H(O)C-4-C₆H₂(CH₂NMe₂)₂-2,6-Br-1 (1b) with an excess of hydroxylamine. In the solid state both compounds are forming polymers with intermolecular O-H?N connectivities between the Me₂NCH₂ substituents and the oxime entity of further molecules of 2a and 2b, respectively. Characteristic for 2a and 2b is a helically arrangement involving a crystallographic 2₁ screw axis of the HONCH-1-C₆H₃(CH₂NMe₂)₂-3,5 and HONCH-4-C₆H₂(CH₂NMe₂)₂-2,6-Br-1 building blocks.The reaction of 2b with equimolar amounts of [Pd₂(dba)₃ · CHCl₃] (3) (dba = dibenzylidene acetone) or [Pt(tol)₂(SEt₂)]₂ (4) (tol = 4-tolyl) gave by an oxidative addition of the C-Br unit to M coordination polymers with a [(HONCH-4-C₆H₂(CH₂NMe₂)₂-2,6)MBr] repeating unit (5: M = Pd, 6: M = Pt). Complexes 5 and 6 are in the solid state linear hydrogen-bridged polymers with O-H?Br contacts between the oxime entities and the metal-bonded bromide.     

Synthesis, characterization, and substituent effects of mononuclear ruthenium complexes [RuCl(CO)(PMe3)3(CHCH-C6H4-R-p)] (R = H, CH3, OCH3, NO2, NH2, NMe2)

A series of mononuclear ruthenium complexes [RuCl(CO)(PMe₃)₃(CHCH-C₆H₄-R-p)] (R = H (2a), CH₃ (2b), OCH₃ (2c), NO₂ (2d), NH₂ (2e), NMe₂ (2f)) has been prepared. The respective products have been characterized by elemental analyses, NMR spectrometry, and UV-Vis spectrophotometry. The structures of complexes 2c and 2d have been established by X-ray crystallography. Electrochemical studies have revealed that electron-releasing substituents facilitate monometallic ruthenium complex oxidation, and the substituent parameter values (σ) show a strong linear correlation with the anodic half-wave or oxidation peak potentials of the complexes.     

X-ray and multinuclear NMR study of the mixed aggregate [(Ph2P(O)N(CH2Ph)CH3) · LiOC6H2-2,6-{C(CH3)3}2-4-CH3) · C7H8]2: a model for the directed metalation of phosphinamides

The addition of LiBuⁿ to a toluene solution of Ph₂P(O)N(CH₂Ph)CH₃1 and 2,6-di-tert-butyl-4-methylphenol 5 leads to the formation of the mixed dimer [(Ph₂P(O)N(CH₂Ph)CH₃) · LiOC₆H₂-2,6-{C(CH₃)₃}₂-4-CH₃) · C₇H₈]₂6. The single crystal X-ray structure shows that two lithium aryloxide moieties dimerize giving rise to a Li₂O₂ core in which each lithium atom is additionally coordinated to a phosphinamide 1 ligand. The multinuclear magnetic resonance study (¹H, ⁷Li, ¹³C, ³¹P) indicates that the solid-state structure is preserved in toluene solution. Complex 6 may be considered as a model for the pre-complexation step preceding the metalation of phosphinamides by an organolithium base.     

Dimeric and trimeric diorganosilicon chalcogenides (PhRSiE)2,3 (E = S, Se, Te; R = Ph, Me)

Ph₂SiCl₂ and PhMeSiCl₂ react with Li₂E (E = S, Se, Te) under formation of trimeric diorganosilicon chalcogenides (PhRSiE)₃ (R = Ph: 1a-3a, R = Me: cis/trans-4a (E = S), cis/trans-5a (E = Se)). In case of E = S, Se dimeric four-membered ring compounds (PhRSiE)₂ (R = Ph: 1b-2b, R = Me: cis/trans-4b (E = S), cis/trans-5b (E = Se)) have been observed as by-products. 1a-5b have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹²⁵Te). Four- and six-membered ring compounds differ significantly in ²⁹Si and ⁷⁷Se chemical shifts as well as in the value of ¹J_SiSe.The molecular structures of 2a, 3a and trans-5a reported in this paper are the first examples of compounds with unfused six-membered rings Si₃E₃ (E = Se, Te). The Si₃E₃ rings adopt twisted boat conformations. The crystal structure of 3a reveals an intermolecular Te-Te contact of 3.858 Å which yields a dimerization in the solid state.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

Syntheses and structures of [Me2Si{As(PBu)3}2] and [(CyP)3SiMe2] (Cy = cyclohexyl, C6H11)

The reaction of the anion [(^tBuP)₃As]⁻ (1) with Me₂SiCl₂ results in nucleophilic substitution of the Cl⁻ anions, giving the di- and mono-substituted products [Me₂Si{As(P^tBu)₃}₂] (3a) and [Me₂Si(Cl){As(P^tBu)₃}] (3b). Analogous reactions of the pre-isolated [(CyP)₄As]⁻ anion (2) (Cy = cyclohexyl) with Me₂SiCl₂ produced mixtures of products, from which no pure materials could be isolated. However, reaction of 2 [generated in situ from CyPHLi and As(NMe₂)₃] gives the heterocycle [(CyP)₃SiMe₂] (4). The X-ray structures of 3a and 4 are reported.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Theoretical study on the substitution and insertion reactions of silylenoid H2SiLiF with CH3XHn−1 (X = F, Cl, Br, O, N; n = 1, 1, 1, 2, 3)

The substitution and insertion reactions of H₂SiLiF (A) with CH₃XH_n−1 (X = F, Cl, Br, O, N; n = 1, 1, 1, 2, 3) have been studied using density functional theory. The results indicate that the substitution reactions of A with CH₃XH_n−1 proceed via two reaction paths, I and II, forming the same product H₂SiFCH₃. The insertion reactions of A with CH₃XH_n−1 form H₂SiXH_n−1CH₃. The following conclusions emerge from this work. (i) The substitution reactions of A with CH₃XH_n−1 occur in a concerted manner. The substitution barriers of A with CH₃XH_n−1 for both pathways decrease with the increase of the atomic number of the element X for the same family systems or for the same row systems. Path I is more favorable than path II. (ii) A inserts into a C-X bond via a concerted manner, and the reaction barriers increase for the same-row element X from right to left in the periodic table, whereas change very little for the systems of the same-family element X. (iii) The substitution reactions occur more readily than the insertion reactions for A with CH₃XH_n−1 systems. (iv) All substitution and insertion reactions of A with CH₃XH_n−1 are exothermic. (v) In solvents, the substitution reaction process of A with CH₃XH_n−1 is similar to that in vacuum. The barrier heights in solvents increase in the order CH₃F < CH₃Cl < CH₃Br < CH₃OH < CH₃NH₂. The solvent polarity has little effects on the substitution barriers. The calculations are in agreement with experiments.