Synthesis and characterization of metal diselenophosphates: M[Se2P(OR)2]2 (M = Pd,Pt; R = Et,Pr, Pr)

The first Pd(II) and Pt(II) complexes incorporating diselenophosphate (dsep) ligands are presented. Treatment of M(II) (M = Pd, Pt) salts with two equivalents of the dsep ligand in CH₂Cl₂ yielded square-planar compounds of the type M[Se₂P(OR)₂]₂ (M = Pd, Pt; R = Et, ⁱPr, ⁿPr) (1a–2c). These complexes were characterized by elemental analysis, multinuclear NMR spectroscopy and X-ray diffraction (1b and 2b). The dsep ligands coordinate to the metal in an approximately isobidentate fashion and form four-membered Se–P–Se–M chelate rings. Structural elucidations indicated that minute differences exist in the M–Se bond distances and these were observed from solution ³¹P NMR studies, which exhibited two sets of satellites arising from one-bond coupling to ⁷⁷Se nuclei. A packing diagram showed a chain-like motif which was composed of square-planar M[Se₂P(OR)₂]₂ units and occurred via non-covalent Se?Se secondary interactions.     

Bis-aryloxo-functionalized NHC complexes of ytterbium(III): Syntheses and structures of Yb[O-4,6-Bu2-C6H2-2-CH2{C(RNCHCHN)}]2N(Pr)2 (R = Pr, Me)

The transamination of anionic homoleptic amido ytterbium complex, LiYb[N(i-Pr)₂]₄ with aryloxo-functionalized N-heterocyclic carbene (NHC) precursor, HO-4,6-di-^tBu-C₆H₂-2-CH₂{CH[i-Pr-NCHCHN]}Cl (H₂LCl) 1 and HO-4,6-di-^tBu-C₆H₂-2-CH₂{CH[Me-NCHCHN]}Cl (H₂L′Cl) 2, and BuLi in 1:2:1 molar ratio in THF at 0 °C afforded the first bisaryloxo- NHC monoamido ytterbium complexes, L₂Yb [N(i-Pr)₂] 3 and , respectively. The same reactions in the molar ratio of 1:1 without BuLi yields also the complex 3 and 4, not the bis-amido mono aryloxo-NHC complex {LYb[N(i-Pr)₂]₂} and {L′Yb[N(i-Pr)₂]₂}. The in situ low-temperature reaction of 2 with two equivalents of BuLi, followed by addition of one equivalent of YbCl₃ in THF does not afford the expected LYbCl₂, instead, [Li(DME)₃][YbCl₄(DME)] 5 and a dimeric imidazole-aryloxo lithium {[O-4,6-di-^tBu-C₆H₂-2-CH₂{CH(MeNCHCHNH)}]Li(THF)}₂6 which results from the 1,2-benzyl migration in N-heterocyclic carbene, are obtained. Complexes 3, 4, 5 and 6 have been characterized by elemental analysis and X-ray crystallography, and by NMR spectroscopy for 6.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Reactions of Co2(CO)8 and of Co2(CO)6L (L = 3-pentyn-1-ol, 1,4-butyn-diol or 2-methyl-3-butyn-2-ol) with 2(diphenylphosphino)ethyl-trietoxysilane and tris(hydroxymethyl)phosphine for applications to new sol-gel materials

The complex Co₂(CO)₆[μ-η²-(H₃CCCCH₂CH₂OH)] (1) with the ligand 3-pentyn-1-ol (pol) has been synthesized following established procedures. Its structure has been determined by X-ray analysis. The complex Co₂(CO)₆(mbo) (mbo = 2-methyl-3-butyn-2-ol, HCCC(CH₃)₂OH), (3), along with the already known Co₂(CO)₆(bud) (bud = 1,4-butyn-diol, HOCH₂CCCH₂OH) (2), and Co₂(CO)₈ were reacted with 2(diphenylphosphino)ethyl-triethoxysilane [Ph₂PCH₂CH₂Si(OCH₂CH₃)₃] (dpts) and tris(hydroxymethyl)phosphine [P(CH₂OH)₃] (thp). With dpts, mono- and di-substituted complexes were obtained: these were characterized by analytical and spectroscopic techniques. The structures of Co₂(CO)₆(dpts)₂ (5) and of Co₂(CO)₄(pol)(dpts)₂ (8) have been determined by X-ray analysis.Complex (1) was reacted with 3-(triethoxysilyl)propyl isocyanate [(H₃CCH₂O)₃Si(CH₂)₃NCO] (tsi): the new complex Co₂(CO)₆[H₃CCCCH₂CH₂OC(O)NH(CH₂)₃Si(OCH₂CH₃)₃] (9) was obtained and spectroscopically characterized. The complex has also been reacted with tetraethyl orthosilicate (teos); a new inorganic-organometallic material was obtained. Complex (5) has been grafted on the mesoporous material SBA-15. The hybrid inorganic-organometallic materials obtained have been characterized by inductively coupled plasma-mass spectrometry (ICP-MS), infrared spectroscopy (FT-IR) under vacuum conditions, X-ray diffraction (XRD) and scanning electron microscopy coupled to EDS probe (SEM-EDS).     

Synthesis and characterization of new sulfide aggregates of the type [{Pt2(μ3-S)2(P-P)2}M(C6F5)2] (M=Ni, Pd, Pt; P-P=2PPh3, 2PMe2Ph, dppf)

The reaction of [Pt₂(μ-S)₂(P-P)₂] (P-P=2PPh₃, 2PMe₂Ph, dppf) [dppf=1,1^′-bis(diphenylphosphino)ferrocene] with cis-[M(C₆F₅)₂(PhCN)₂] (M=Ni, Pd) or cis-[Pt(C₆F₅)₂(THF)₂] (THF=tetrahydrofuran) afforded sulfide aggregates of the type [{Pt₂(μ₃-S)₂(P-P)₂}M(C₆F₅)₂] (M=Ni, Pd, Pt). X-ray crystal analysis revealed that [{Pt₂(μ₃-S)₂(dppf)₂}Pd(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Ni(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Pd(C₆F₅)₂] and [{Pt₂(μ₃-S)₂(PMe₂Ph)₂}Pt(C₆F₅)₂] have triangular M₃S₂ core structures capped on both sides by μ₃-sulfido ligands. The structural features of these polymetallic complexes are described. Some of them display short metal-metal contacts.     

Mixed-metal cluster chemistry VI: Phosphine substitution at CpMoIr3(μ-CO)3(CO)8; X-ray crystal structure of CpMoIr3(μ-CO)3(CO)7(PPh3)

Reactions of CpMoIr₃(μ-CO)₃(CO)₈ (1) with stoichiometric amounts of phosphines afford the substitution products CpMoIr₃(μ-CO)₃(CO)_8−x (L)_x (L = PPh₃, x = 1 (2), 2 (3); L = PMe₃, x = 1 (4), 2 (5), 3 (6)) in fair to good yields (23–54%); the yields of both 3 and 6 are increased on reacting 1 with excess phosphine. Products 2–5 are fluxional in solution, with the interconverting isomers resolvable at low temperatures. A structural study of one isomer of 2 reveals that the three edges of an MoIr₂ face of the tetrahedral core are spanned by bridging carbonyls, and that the iridium-bound triphenyiphosphine ligates radially and the molybdenum-bound cyclopentadienyl coordinates axially with respect to this Molr₂ face. Information from this crystal structure, ³¹P NMR data (both solution and solid-state), and results with analogous tungsten—triiridium and tetrairidium clusters have been employed to suggest coordination geometries for the isomeric derivatives.     

Simple protocol for the synthesis of the asymmetric PCP pincer ligand [C6H4-1-(CH2PPh2)-3-(CH(CH3)PPh2)] and its Pd(II) derivative [PdCl{C6H3-2-(CH2PPh2)-6-(CH(CH3)PPh2)}]

The asymmetric PCP pincer ligand [C₆H₄-1-(CH₂PPh₂)-3-(CH(CH₃)PPh₂)] (4) has been synthesized in a facile manner in three simple steps in high yield. Metallation of PCP pincer ligand (4) with [Pd(COD)Cl₂] affords complex [PdCl{C₆H₃-2-(CH₂PPh₂)-6-(CH(CH₃)PPh₂)}] (7) in good yield.     

Molecular structure and IR absorption spectra of perfluorinated aldehyde hydrates (n-CxF2x+1CH(OH)2, x = 1-4)

Structures and IR absorption spectra of the conformational isomers of perfluorinated aldehyde hydrates, n-C_xF_2x+1CH(OH)₂, (x = 1-4) have been calculated using density functional theory (DFT) and compared to experimental FT-IR measurements. Two absorption peaks around 3600-3700 cm⁻¹ were observed and are assigned to OH stretching modes of OH groups with, and without, intramolecular hydrogen bonding. For n-C₃F₇CH(OH)₂, two absorption bands around 900-1000 cm⁻¹ were observed in the experimental spectra, whereas only a single in-phase stretching mode of the (CF₃)(C₂F₄CH(OH)₂) and (C₃F₇)(CH(OH)₂) bonds was calculated for each conformer. The experimental spectra were well described by composite spectra of the thermal equilibrium mixture of different conformational isomers of n-C_xF_2x+1CH(OH)₂ calculated by DFT.     

Backbone modified small bite-angle diphosphines: Synthesis and molecular structures of [M(CO)4{X2PC(RR)PX2}] (M = Mo, W; X = Ph, Cy; R = H, Me, Et, Pr, allyl, R = Me, allyl)

A range of new small bite-angle diphosphine complexes, [M(CO)₄{X₂PC(R¹R²)PX₂}] (M = Mo, W; X = Ph, Cy; R¹ = H, Me, Et, Pr, allyl, R² = Me, allyl), have been prepared via elaboration of the methylene backbones in [M(CO)₄(X₂PCH₂PX₂)] as a result of successive deprotonation and alkyl halide addition. When X = Ph it proved possible to replace both methylene protons but for X = Cy only one substitution proved possible. This is likely due to the electron-releasing nature of the cyclohexyl groups but may also be due to steric constraints. Attempts to prepare the bis(allyl) substituted complex [Mo(CO)₄{Ph₂PC(allyl)₂PPh₂}] were only moderately successful. The crystal structures of nine of these complexes are presented.     

Self-assembly directed by C-H activation: Synthesis and characterization of [(CpIr)2(R-NC-Ph-CNR)]2(4,4-bipyridine)2·(OTf)4 (R = Ph, Me)

Self-assembly of a novel class of bis-imine-cyclometalated macrocycles [(Cp^∗Ir)₂(Ph-NC-Ph-CN-Ph)]₂(4,4′-bipyridine)₂·(OTf)₄ (3a) and [(Cp^∗Ir)₂(Me-NC-Ph-CN-Me)]₂(4,4′-bipyridine)₂·(OTf)₄ (3b) was directed by double-site C-H activations of aromatic bis-imine substrates. Two synthetic routes were established, using either (i) binuclear cyclometalated complexes (Cp^∗Ir)₂L1Cl₂ (1a) and (Cp^∗Ir)₂L2Cl₂ (1b) or (ii)4,4′-bipyridine(bpy)-bridged complex (Cp^∗IrCl₂)₂(bpy) (2) as starting materials. All the products were characterized by IR, ¹H NMR and EA. Isomers were found in macrocyclic complexes, which were thermodynamically stable from reversible transformation in days. Highly robust structure of the cyclometalated macrocycles was indicated by the existence of stable isomer pairs. One isomer of 3b was determined by single-crystal X-ray diffraction. It was a rare case for half-sandwich metallosupramolecular macrocycles that weak interactions between macrocycles and OTf ions were fully captured in detail, and were demonstrated to be essential for the maintenance of tunnel structures of macrocycles in crystal packing.     

Chelate structures of 5-(H/Br)-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazones (H2L): Synthesis and structural characterizations of [Ni(L)(PPh3)] and [Ru(HL)2(PPh3)2]

The reactions of 5-R-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazone {R: H (L¹); Br (L²)} with [M^II(PPh₃)nCl₂] (M = Ni, n = 2 and M = Ru, n = 3) in a 1:1 molar ratio have given stable solid complexes corresponding to the general formula [Ni(L)(PPh₃)] and [Ru(HL)₂(PPh₃)₂]. While the 1:1 nickel complexes are formed from an ONS donor set of the thiosemicarbazone and the P atom of triphenylphosphine in a square planar structure, the 1:2 ruthenium complexes consist of a couple from each of N, S and P donor atoms in a distorted octahedral geometry. These mixed-ligand complexes have been characterized by elemental analysis, IR, UV–Vis, APCI-MS, ¹H and ³¹P NMR spectroscopies. The structures of [Ni(L²)(PPh₃)] (II) and [Ru(L¹H)₂(PPh₃)₂] (III) were determined by single crystal X-ray diffraction.     

Synthesis and coordinating properties of the facultative Sb2O- and As2O-donor ligands O{(CH2)2ER2}2 (E = Sb or As; R = Ph or Me)

The new mixed Sb₂O-donor ligands O{(CH₂)₂SbR₂}₂ (R = Ph, 1; R = Me, 2) with flexible backbones have been prepared in good yields as air-sensitive oils from reaction of NaSbR₂ with 0.5 mol equivalents of O(CH₂CH₂Br)₂ in thf solution. The As₂O-donor analogues, O{(CH₂)₂AsR₂}₂ (R = Ph, 3; R = Me, 4) were obtained similarly from LiAsPh₂ or NaAsMe₂, respectively and O(CH₂CH₂Br)₂, although ligand 4 appears to be considerably less stable with respect to C-O bond fission under some conditions than the other ligands. Using O(CH₂CH₂Cl)₂ leads only to partial substitution by the SbPh₂⁻ or AsPh₂⁻ nucleophile. These ligands behave as bidentate chelating Sb₂- or As₂-donors in the distorted tetrahedral [M(L-L)₂]BF₄ (M = Cu or Ag; L-L = 1-4) on the basis of solution ¹H and ⁶³Cu NMR spectroscopic studies, mass spectrometry and microanalyses. Crystal structures of three representative examples with Cu(I) and Ag(I) confirm the distorted tetrahedral Sb₄ or As₄ coordination at the metal and allow comparisons of geometric parameters. The crystallographic identification of an unexpected Cu(I)-Cu(I) complex, [Cu₂{Me₂As(CH₂)₂OH}₃](BF₄)₂, obtained as a by-product via C-O bond fission within ligand 4 is also reported. The distorted octahedral [RhCl₂(L-L)₂]Cl and the distorted square planar cis-[PtCl₂(L-L)] (L-L = 1 or 2) are also described. The ether O atoms are not involved in coordination to the metal ion in any of the late transition metal complexes isolated.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

Alkaline earth metal poly(hydrogen fluorides) hexafluoroarsenates(V) and hexafluorophosphate(V): M2(H2F3)(HF2)2(AF6) (M = Ca, A = As; M = Sr, A = As, P)

New compounds of the type M₂(H₂F₃)(HF₂)₂(AF₆) with M = Ca, A = As and M = Sr, A = As, P) were isolated. Ca₂(H₂F₃)(HF₂)₂(AsF₆) was prepared from Ca(AsF₆)₂ with repeated additions of neutral anhydrous hydrogen fluoride (aHF). It crystallizes in a space group P4₃22 with a = 714.67(10) pm, c = 1754.8(3) pm, V = 0.8963(2) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(AsF₆) was prepared at room temperature by dissolving SrF₂ in aHF acidified with AsF₅ in mole ratio SrF₂:AsF₅ = 2:1. It crystallizes in a space group P4₃22 with a = 746.00(12) pm, c = 1805.1(5) pm, V = 1.0046(4) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(PF₆) was prepared from Sr(XeF₂)_n(PF₆)₂ in neutral aHF. It crystallizes in a space group P4₁22 with a = 737.0(3) pm, c = 1793.7(14) pm, V = 0.9744(9) nm³ and Z = 4. The compounds M₂(H₂F₃)(HF₂)₂(AF₆) gradually lose HF at room temperature in a dynamic vacuum or during being powdered for recording IR spectra or X-ray powder ray diffraction patterns. All compounds are isotypical with coordination of nine fluorine atoms around a metal center forming a distorted Archimedian antiprism with one face capped. This is the first example of the compounds in which H₂F₃⁻ and HF₂⁻ anions simultaneously bridge metal centers forming close packed three-dimensional network of polymeric compounds with low solubility in aHF. The HF₂⁻ anions are asymmetric with usual F?F distances of 227.3-228.5 pm. Vibrational frequency (ν₁) of HF₂⁻ is close to that in NaHF₂. The anion H₂F₃⁻ exhibits unusually small F?F?F angle of 95.1°-97.6° most probably as a consequence of close packed structure.     

Improved syntheses of bis(ethynyl)-para-carboranes, 1,12-(RCC)2-1,12-C2B10H10 and 1,10-(RCC)2-1,10-C2B8H8 (R = H or Me3Si)

Copper-mediated cross-coupling reactions of the 12-vertex and 10-vertex para carboranes, 1,12-C₂B₁₀H₁₂ and 1,10-C₂B₈H₁₀, with trans-1-iodo-2-chloroethene gave the bis(trans-2-chloroethenyl) carboranes, 1,12-(ClCHCH)₂-1,12-C₂B₁₀H₁₀ and 1,10-(ClCHCH)₂-1,10-C₂B₈H₈, respectively, in good yield. The molecular structures of both compounds were determined by X-ray crystallography, verifying the trans disposition of the chloride and carboranyl substituents across the double bonds. These vinyl carboranes can be converted to bis(ethynyl) carboranes, 1,12-(RCC)₂-1,12-C₂B₁₀H₁₀ and 1,10-(RCC)₂-1,10-C₂B₈H₈ (R = H or Me₃Si), easily, and in high yields. These findings provide the most convenient routes to bis(ethynyl) carboranes from the commercially available carboranes, 1,12-C₂B₁₀H₁₂ and 1,10-C₂B₈H₁₀ reported to date.     

Jahn-Teller-distorted dimeric anions in (cat)[Mn2F8(H2O)2]·2H2O (cat = pipzH2, dabcoH2) and (dabcoH2)2[Mn2F8(H2PO4)2]

Using biprotonated dabco (1,4-diazabicyclo[2.2.2]octane) or pipz (piperazine) as counter cations, mixed-ligand fluoromanganates(III) with dimeric anions could be prepared from hydrofluoric acid solutions. The crystal structures were determined by X-ray diffraction on single crystals: dabcoH₂[Mn₂F₈(H₂O)₂]·2H₂O (1), space group P2₁, Z = 2, a = 6.944(1), b = 14.689(3), c = 7.307(1) Å, β = 93.75(3)°, R₁ = 0.0240; pipzH₂[Mn₂F₈(H₂O)₂]·2H₂O (2), space group , Z = 2, a = 6.977(1), b = 8.760(2), c = 12.584(3) Å, α = 83.79(3), β = 74.25(3), γ = 71.20(3)°, R₁ = 0.0451; (dabcoH₂)₂[Mn₂F₈(H₂PO₄)₂] (3), space group P2₁/n, Z = 4, a = 9.3447(4), b = 12.5208(4), c = 9.7591(6) Å, β = 94.392(8)°, R₁ = 0.0280. All three compounds show dimeric anions formed by [MnF₅O] octahedra (O from oxo ligands) sharing a common edge, with strongly asymmetric double fluorine bridges. In contrast to analogous dimeric anions of Al or Fe(III), the oxo ligands (H₂O (1,2) or phosphate (3)) are in equatorial trans-positions within the bridging plane. The strong pseudo-Jahn-Teller effect of octahedral Mn(III) complexes is documented in a huge elongation of an octahedral axis, namely that including the long bridging Mn-F bond and the Mn-O bond. In spite of different charge of the anion in the fluoride phosphate, the octahedral geometry is almost the same as in the aqua-fluoro compounds. The strong distortion is reflected also in the ligand field spectra.     

[Pb2(TNR)2(CHZ)2(H2O)2]4H2O的结构及热分解机理

The coordination compound of [Pb 2(TNR) 2(CHZ) 2(H 2O) 2]•4H 2O was prepared by using the aqueous solution of carbohydrazide, lead nitrate and sodium styphnate. The molecular structure of [Pb 2(TNR) 2(CHZ) 2(H 2O) 2]•4H 2O(C 7H 13 N 7O 12 Pb, Mr=594.43) was determined by using a single crystal diffraction analysis .The thermal decomposition mechanism of the title compound was studied by TGDTG, DSC and IR techniques. The crystal belongs to monoclinic with space group P2 1/n.The unit cell parameters are as follows: a=0.64700(10)nm, b=1.6074(3)nm, c=1.4883(3)nm,β=97.42(2)°,V=1.5349(5)nm3, Z=2, DC=2.572g•cm -3 ,μ(Mo, Kα)=11.080cm -1 , F(000)=1128. R=0.0422, Rw=0.0735. The binuclear lead coordination compound is bridged by two carbohydrazide molecules. The molecule has a symmetrical center. TNR 2- ,CHZ and H 2O coordinate with the central ions simultaneously.     

Synthesis, structure and butadiene polymerization behavior of CoCl2(PRxPh3 − x)2 (R = methyl, ethyl, propyl, allyl, isopropyl, cyclohexyl; x = 1, 2). Influence of the phosphorous ligand on polymerization stereoselectivity

Several cobalt(II) phosphine complexes have been synthesized by reacting cobalt(II) chloride with various mono- and diphenylalkylphosphines (PR_xPh_3 − x; R = methyl, ethyl, allyl, propyl, isopropyl, cyclohexyl; x = 1, 2). For some of these complexes single crystals were obtained and their molecular structure, were determined by X-ray diffraction method. All the complexes were then used in association with MAO for the polymerization of 1,3-butadiene and they were found to be extremely active. Predominantly 1,2 polymers having different tacticity (predominantly iso- or syndiotactic), depending on the type of phosphine ligand bonded to the cobalt atoms were obtained. An interpretation of this particular behavior, based on the diene polymerization mechanism previously proposed, is reported.