How to design a kinetic-catalytic method of analysis based on ligand substitution reactions

From a mechanistic consideration on the formation constant of a metal complex, the catalytic effect of a third ligandA on ligand substitution reaction is found to be given by log(k _f ^A )=E(A)+H(A)+E(A), wherek _f andk _f ^A refer to the rate constants for a non-catalyzed reaction path and catalyzed reaction path, respectively, andE andH are the electron donor constant and basicity constant of the specified ligand, respectively,,, and are constants characteristic of a metal ion and their values have been estimated from the mechanistic consideration on the reactivity of a metal ion and its complex. With this equation and the parameters,,,E, andH, the acceleration effect of halide ions on the ligand substitution reaction of mercury(II)-4-(2-pyridylazo)resorcinol complex with l,2-cyclohexanediamine-N,N,N,N-tetraacetic acid was quantitatively demonstrated. With the same parameters some possibilities to design a new kinetic-catalytic method of analysis based on ligand substitution reactions were proposed.     

Syntheses of homopolymer and water-soluble polymers containing tetraphenylporphinatomanganese(III) complex,and ligand substitution reaction for anionic ligand

A vinyl monomer containing the pendant tetraphenylporphyrin (TPP) group, 4-vinyltetraphenylporphyrin (VTPP), was synthesized. A homopolymer (PVTPP) which is insoluble in water, and three water-soluble polymers were obtained by radical polymerization. The water-soluble polymers are two anionic polymers (PVPTSPP and PVTPP-StSO₃) and a cationic polymer (PVTPP-VPyM). PVPTSPP has sulfonic acid groups in a TPP group and very high charge density. PVTPP-StSO₃ was obtained by copolymerization of VTPP and sodium 4-styrenesulfonate. PVTPP-VPyM was obtained by quarternarization of a copolymer of VTPP and 4-vinylpyridine. Polymeric manganese(III) complexes (PMn-VTPP, PMnVPTSPP, PMnVTPP-StSO₃, and PMnVTPP-VPyM) were prepared from the polymers and manganese acetate. The acetate ligand in PMnVTPP can be easily substituted by another ligand such as Cl^?, AcO^?, OH^?, and SCN^?. The substitution reaction occurs in the interface between water and chloroform. The sulfonated homopolymer, PMnVPTSPP, cannot incorporate with anionic ligands because of the strong electrostatic repulsion. In the anionic copolymer, PMnVTPP-StSO₃, the ligand substitution reaction with SCN ligand needs activation energy of 53 kJ/mol. In the cationic polymer complex, PMnVTPP-VPyM, the OH ligand can be easily substituted with the SCN ligand and the equilibrium constant of the reaction was estimated at 1.38 × 10^?3. © 1994 John Wiley & Sons, Inc.     

A kinetics study of ligand substitution reaction on dinuclear platinum complexes: Stochastic versus deterministic approach

The kinetics on a basic ligand substitution reaction on dinuclear platinum complexes [Pt(PEt₃)₂PhPt(PEt₃)₂]²⁺ and [Pt(PEt₃)₂PhCOPhPt(PEt₃)₂]²⁺ , with the ligands pyridine and 3-chloropyridine, is studied. This is a fundamental step in a self-assembly, and the time evolution has been observed with a new experimental technique, QASAP (quantitative analysis of self-assembly process), which is recently developed by Hiraoka's group. As a result of numerical calculations based on master equation, we succeed in specifying the reaction rate constants with a simple reaction model. In addition, the time evolutions of all the intermediate components produced and consumed in chemical reaction are revealed, including those unobserved in the experiments. The convergence behavior of the existence ratios of specific chemical species calculated with the stochastic algorithm method is compared with those obtained from deterministic formalism based on rate equations, revealing a clear dependence on the number of constituent molecules. © 2018 Wiley Periodicals, Inc.     

Palladium-catalyzed asymmetric tandem allylic substitution using chiral 2-(phosphinophenyl)pyridine ligand

Palladium-catalyzed asymmetric tandem allylic substitution of (Z)-1,4-diacyloxy- and (Z)-1,4-bis(alkoxycarbonyloxy)-2-butene (2a-c) using 2-(phosphinophenyl)pyridine 1 as chiral ligand provided optically active six-membered 2-vinyl-1,4-diheterocyclic compounds with good to high enantioselectivity. For example, the reactions with catechol, 2-(benzylamino)phenol, or 1,2-bis(benzylamino)ethane as a nucleophile gave 2-vinyl-1,4-benzodioxane (71% ee), 4-benzyl-2-vinyl-1,4-benzoxazine (86% ee), and 1,4-dibenzyl-2-vinylpiperazine (86% ee), respectively.     

Equilibrium and kinetic studies on ligand substitution reactions of chloromethyl(aquo)cobaloxime with aromatic and aliphatic N-donor ligands

Equilibria and kinetics of the reactions of chloromethyl(aquo)cobaloxime with histamine, histidine, glycine and ethyl glycine ester were studied as a function of pH at 25°C, 10 M ionic strength (KCl) by spectrophotometric techniques. Comparison of equilibrium constants and rate constants tells that the order isK _Hisdn >K _Hiamn >K _Gly >K _EtGlyest. The rate of substitution of H₂O varies with the pKa of the incoming ligand and nucleophilic participation of the ligand in the transition state. The rate constants and equilibrium constants are correlated to the hardness and softness of the ligands and the Co(III) of cobaloxime.     

Rates of ligand substitution by bromide,thiocyanate, and azide lons at iron (III) ion in dimethyl sulfoxide as solvent

Rate constants for ligand substitution by bromide, thiocyanate and azide ions at iron(III) ion in dimethyl sulfoxide as solvent, determined by stopped-flow spectrophotometry, are similar and are consistent with a dissociative mechanism. In addition, azide ion gives a second much slower, reaction, attributed to formation of a binuclear complex. Results of similar measurements with thiocyanate ion in acetonitrile were more complicated, attributed to a marked influence of residual water on the reactivity of iron (III) ion.     

Microwave-assisted synthesis of tin sulfide nanoflakes and their electrochemical performance as Li-inserting materials

A novel and quick method has been developed for the preparation of tin sulfide (SnS and SnS₂) nanoflakes in high yield (≈93%) by a microwave irradiation technique for 10–40 min. The sulfides were synthesized in a simple domestic microwave oven (DMO) using stannic chloride and stanous chloride as the precursors of tin and thiourea as the precursor of sulfur in ethylene glycol under argon atmosphere. Elemental sulfur and sodium thiosulfate were also tried as precursors of sulfur. The structures, morphologies, compositions, and physical properties of the products were characterized by powder X-ray diffraction (XRD), differential scanning calorimetry, energy dispersive X-ray analysis, transmission electron microscopy, selected area electron diffraction, Raman spectroscopy, and standard electrochemical techniques. The XRD patterns indicate that the as-synthesized product, obtained after microwave irradiation, is crystalline orthorhombic in the case of the SnS phase and amorphous in the case of SnS₂. Heat treatment of this SnS₂ produced a crystalline hexagonal phase. A possible mechanism for the formation of the tin sulfide nanoflakes is proposed herein. The electrochemical performance of these materials as Li-insertion materials was investigated in a number of electrolyte solutions and was found to be highly sensitive to the solution composition. A stable reversible capacity higher than 600 mAh/g could be obtained with SnS electrodes.     

Synthesis,crystal structure and antimicrobial properties of a copper(II) complex of an unsymmetrical tripodal ligand

A new copper(II) complex of an unsymmetrical tripodal ligand (NN₂O222) derived from tris(2-aminoethylamine)amine (tren) by substitution of one aminoethyl group by an hydroxyethyl group has been synthesized and characterized by X-ray crystallographic methods as [(NN₂O222)Cu(ImH)](ClO₄)₂·0.5H₂O (NN₂O222?=?2-[bis(2-aminoethyl)amino]ethanol; ImH?=?imidazole). Crystals of the complex are orthorhombic, space group Pna2₁, with a?=?29.983(10), b?=?15.568(5), c?=?8.127(3)?Å. Two similar monometallic cations exist in the asymmetric unit and in each case the Cu(II) ion is five-coordinate with tetragonally distorted trigonal bipyramidal geometry. Variable-temperature magnetic measurements show that there is very weak antiferromagnetic interaction between the metal ions. Cyclic voltammetry indicates quasi-reversible Cu^II/Cu^I redox behavior at +44?mV vs SCE. An antimicrobial activity study found that the complex is active against Candida albican, Staphylococcus aureus, Bacillus pumilus, Klebosiella pneumoniae and Escherichia coli, but to no greater extent than Cu(ClO₄)₂·6H₂O.     

Asymmetric construction of quaternary carbon stereocenter by Pd-hemilabile ligand-catalyzed allylic substitution

The catalyst comprised [PdCl(η³-C₃H₅)]₂ and a simple chiral hemilabile ferrocene ligand, 1′,2-bis(diphenylphosphinoethyl)ferrocenyl alcohol, provides synthetically acceptable results for an enantioselective Pd-catalyzed allylic alkylation of cyclohexanone derivatives bearing an electron-withdrawing group at the α-position to form the quaternary carbon with up to 90% enantioselectivity under mild reaction conditions.     

Advances in detection of magnetic fields induced by electrochemical reactions—a review

The paper summarizes achievements in applications of superconducting quantum interference device (SQUID) magnetometry in electrochemical activity sensing, especially in that related to remote corrosion detection. The studies deal with application of the SQUIDs operating in liquid helium or nitrogen with a spatial resolution of magnetic field detection of the order of a millimeter or greater. This made it possible to observe macroscopic magnetic fields, which originated from the large-scale surface currents (ionic and electronic), which resulted from electrochemical potential gradients on electrochemical interfaces. The gradients owed to variations in temperature, alloy composition, sample geometry, electrolyte flow characteristics (velocity, direction, and turbulence), etc. The measurements demonstrated the capability of SQUIDs to remotely sense corrosion across the integrated media consisting of gaseous and solid dielectrics, metal, and electrolyte. The results have shown the potential of magnetometry for practical corrosion detection in the restricted locations such as in ground or concrete. Despite significant efforts, the field is considered to be at an early stage from both fundamental and practical points of view. Contribution to special issue “Magnetic field effects in Electrochemistry”.     

Mechanistic insight into water exchange and aqua/fluoride ligand substitution reactions on aqueous species of Al,Ga and In

Abstract

Two ligand substitution reactions on aqueous complexes of Al, Ga and In, water-exchange and aqua/fluoride substitution reactions, were investigated using density functional theory (DFT), and the preferred substituted mechanisms were estimated based on the activated energy barriers. A series of mechanistic changeovers were found and interpreted at the molecular level. Four factors influencing substitution mechanisms were summarized, i.e. the size of central metal ions, the volume of entering ligands, the charge of clusters, and structural rigidity. The present study provides an approach to probe the ligand substitution mechanism of some reactions inaccessible experimentally.     

Palladium-catalyzed enantioselective allylic substitution by chiral p,n-heterodonor ligands

Summary Chiral P,N-heterodonor ligands are effective in the enantioselective allylic substitution of 1,2-diphenyl-2-propenyl acetate with dimethylmalonate. The reactions are conveniently carried out at ambient temperature. The excellent levels of enantiomeric excess up to 98% were obtained in good conversion.     

Promoting effect of ionic liquids on ligand substitution reactions

Ionic liquid solvents N-hexylpyridinium bistrifylimide ([C₆pyr][Tf₂N]] and 1-butyl-3-methylimidazolium hexafluorophosphate ([C₄mim][PF₆]) promoted the displacement of anionic ligands by pyridine derivatives in trans-(Ph₃P)₂Rh(CO)NO₃ to a much greater extent than did dichloromethane. Thus, addition of a slight excess of 2-fluoropyridine to trans-(Ph₃P)₂Rh(CO)NO₃ in [C₄mim][PF₆] gave a 29:71 product mixture of trans-(Ph₃P)₂Rh(CO)NO₃:[trans-(Ph₃P)₂Rh(CO)(2-fluoropyridine)][NO₃], while the ratio was 91:9 in dichloromethane.     

Synthesis and electrochemical properties of bis(bipyridine)ruthenium(II) complexes bearing pyridinyl- and pyridinylidene ligands induced by cyclometalation of N′-methylated bipyridinium analogs

Ruthenium complexes with bipyridine-analogous quaternized (N,C) bidentate ligands [RuL(bpy)₂](PF₆)₂ (bpy = 2,2′-bipyridine, (1), L = L¹ = N′-methyl-2,4′-bipyridinium; (2), L = L² = N′-methyl-2,3′-bipyridinium) were synthesized and characterized. The structure of complex 2 was determined by the X-ray structure analysis. The ¹³C{¹H} NMR spectroscopic and cyclic voltammetric studies indicate that the coordination modes of these ligands are quite different, that is, the C-coordinated rings of (N,C)-ligands in 1 and 2 are linked to ruthenium(II) with a pyridinium manner and a pyridinylidene one, respectively. The ligand-localized redox potentials of 1 and 2 also revealed the substantial difference in the electron donating ability of both ligands.     

Syntheses, optical and electrochemical properties of 4,4′-bis-[2-(3,4-dibutyl-2-thienylethynyl)]biphenyl and its oligomers

New π-conjugated oligomers (1-3) combined of thiophene rings, CC units, and phenylene rings were synthesized. The monomer (1) was synthesized by Sonogashira cross-coupling reaction. Lithiation and oxidation of the monomer led to the formation of dimer (2) and trimer (3). Optical and electrochemical properties of compounds 1-3 were studied. The oligomers with thioacetyl moieties were synthesized for self-assembly.     

The effect of thiophene ring substitution position on the properties and electrochemical behaviour of alkyne-dicobaltcarbonylthiophene complexes

A large number of Co₂(CO)_6^- and Co₂(CO)₄(L-L)-substituted alkyne complexes (L-L = dppa and dmpm) have been prepared, characterized and studied by cyclic and square-wave voltammetry. In this paper we report a comparative electrochemical study of 2,5-, 2,4-, 3,4- and 2,3-bis(trimethylsilylethynyl)thiophene dicobalt substituted alkyne complexes, in order to evaluate the extent of the electronic interaction between the “Co₂C₂” redox centres depending on the position of the alkynyl substituent on the thiophene ring.     

Reactivity of niobocene dihalogenides toward nitroso derivatives. EPR and IR characterization of the first niobium(IV) complexes containing an ArNO-N,O ligand

The reaction of [Nb(η⁵-C₅H₄R)₂X₂] [1: R = SiMe₃, X = Cl; 2: R = SiMe₃, X = Br; 3: R = H, X = Cl; 4: R =^t, X = Cl] with nitroso derivatives ArNO [a: Ar = Ph; b: Ar = o-CH₃-C₃H₄; c: Ar = p-(CH₃)₂NC₆H₄] yields paramagnetic complexes formulated as [Nb(η⁵-C₅H₄R)(η³-C₅H₄R)X₂(ArNO-N,O) 1a, 1b, 1c, 2a, 3a, 4a and 4c, which have been characterized by ESR and IR spectroscopy.     

Desymmetrization of spiro-activated meso-cyclopropanes via nucleophilic substitution

The spiro-activated cyclopropane 1 undergoes desymmetrization either with Li-thiophenoxide in the presence of a chiral complexing ligand, or with ion pairs formed from thiophenols and aromatic chiral amines. The latter procedure is more efficient and provides the ring-opened thioether 6 in up to 79% yield and up to 60% ee.     

Synthesis and characterization of manganese and copper corrole xanthene complexes as catalysts for water oxidation

Two corrole xanthene ligands and four corresponding Mn^IV and Cu^III complexes have been synthesized and spectroscopically characterized. This kind of complexes, comprising of xanthene and corrole linked by an amide bond, were designed as bio-inspired models for the oxygen evolving complex (OEC) in Photosystem II. We find that both manganese complexes 4a and 5a have efficiency on catalyzing oxygen evolution at low potential (about 0.80 V) by electrochemical method, which is a significant progress in the study of dioxygen formation.     

Strategies toward the sustainable electrochemical oxidation of methane to methanol

1. Download : Download high-res image (283KB)
2. Download : Download full-size image