Color tuning of iridium complexes for organic light-emitting diodes: The electronegative effect and π-conjugation effect

Novel red phosphorescent emitter bis(4-phenylquinazolinato-N,C^2′) iridium(acetylacetonate) [(pqz)₂Ir(acac)], bis(1-(1′-naphthyl)-5-methylisoquinolinato-N,C^2′)iridium(acetylacetonate) [(1-mniq)₂Ir(acac)] and bis(1-(2′-naphthyl)-5-methylisoquinolinato-N,C^2′)iridium(acetylacetonate) [(2-mniq)₂Ir(acac)] have been synthesized and fully characterized. The electronegative effect of (pqz)₂Ir(acac) ligand shows almost the same influence as the extended π-conjugation effect of (2-mniq)₂Ir(acac). Density functional theory (DFT) was applied to calculate the Kohn-Sham orbitals of HOMOs and LUMOs in the iridium complexes to illustrate the N(1) electronegative atom effect. Finally, lowest triplet state (T₁) energies calculated by time-dependent DFT (TDDFT) were compared with the experimental electroluminescent data. The calculated data for the iridium complexes agreed fairly well with experimental data. Electroluminescent devices with a configuration of ITO/NPB/CBP:dopant/BCP/AlQ₃/LiF/Al were fabricated. The device using (pqz)₂Ir(acac) as a dopant showed deep-red emission with 1931 CIE (Commission International de L’Eclairage) chromaticity coordinates x = 0.70, y = 0.30.     

Synthesis and photoluminescence of iridium complexes with benzothiazol-2-yl carbazole derivative ligand

Two new iridium(III) complexes containing benzothiazol-2-yl carbazole derivative as a cyclometalated ligand (L) and picolinate (pic) or acetylacetonate (acac) as the ancillary ligand, Ir(III) bis(3-(benzothiazol-2-yl)-9-butyl-carbazole)(picolinate) [Ir(L)₂(pic)] and Ir(III) bis(3-(benzothiazol-2-yl)-9-butyl-carbazole)(acetylacetonate) [Ir(L)₂(acac)], were synthesized and characterized by elemental analysis, ¹H NMR, FT-IR, and UV–Vis absorption spectra. Both the iridium(III) complexes emit intense green–yellow emissions, indicating that they are useful for the fabrication of organic light-emitting diodes.     

Highly phosphorescent bis-cyclometalated iridium complexes: synthesis, photophysical characterization, and use in organic light emitting diodes.

The synthesis and photophysical study of a family of cyclometalated iridium(III) complexes are reported. The iridium complexes have two cyclometalated (C(**)N) ligands and a single monoanionic, bidentate ancillary ligand (LX), i.e., C(**)N2Ir(LX). The C(**)N ligands can be any of a wide variety of organometallic ligands. The LX ligands used for this study were all beta-diketonates, with the major emphasis placed on acetylacetonate (acac) complexes. The majority of the C(**)N2Ir(acac) complexes phosphoresce with high quantum efficiencies (solution quantum yields, 0.1-0.6), and microsecond lifetimes (e.g., 1-14 micros). The strongly allowed phosphorescence in these complexes is the result of significant spin-orbit coupling of the Ir center. The lowest energy (emissive) excited state in these C(**)N2Ir(acac) complexes is a mixture of (3)MLCT and (3)(pi-pi) states. By choosing the appropriate C(**)N ligand, C(**)N2Ir(acac) complexes can be prepared which emit in any color from green to red. Simple, systematic changes in the C(**)N ligands, which lead to bathochromic shifts of the free ligands, lead to similar bathochromic shifts in the Ir complexes of the same ligands, consistent with "C(**)N2Ir"-centered emission. Three of the C(**)N2Ir(acac) complexes were used as dopants for organic light emitting diodes (OLEDs). The three Ir complexes, i.e., bis(2-phenylpyridinato-N,C2')iridium(acetylacetonate) [ppy2Ir(acac)], bis(2-phenyl benzothiozolato-N,C2')iridium(acetylacetonate) [bt2Ir(acac)], and bis(2-(2'-benzothienyl)pyridinato-N,C3')iridium(acetylacetonate) [btp2Ir(acac)], were doped into the emissive region of multilayer, vapor-deposited OLEDs. The ppy2Ir(acac)-, bt2Ir(acac)-, and btp2Ir(acac)-based OLEDs give green, yellow, and red electroluminescence, respectively, with very similar current-voltage characteristics. The OLEDs give high external quantum efficiencies, ranging from 6 to 12.3%, with the ppy2Ir(acac) giving the highest efficiency (12.3%, 38 lm/W, >50 Cd/A). The btp2Ir(acac)-based device gives saturated red emission with a quantum efficiency of 6.5% and a luminance efficiency of 2.2 lm/W. These C(**)N2Ir(acac)-doped OLEDs show some of the highest efficiencies reported for organic light emitting diodes. The high efficiencies result from efficient trapping and radiative relaxation of the singlet and triplet excitons formed in the electroluminescent process.     

Application of heteroleptic iridium complexes with fluorenyl-modified 1-phenylisoquinoline ligand for high-efficiency red polymer light-emitting devices

A series of new heteroleptic iridium complexes bearing fluorenyl-modified 1-phenylisoquinoline as the first ligand and different ancillary ligands has been prepared and characterized. These complexes bis(1-(3-(9,9-dimethyl-fluoren-2-yl)phenyl)isoquinoline-C2,N′)iridium(III)acetylacetonate(Ir(DMFPQ)₂acac)), bis(1-(3-(9,9-dimethyl-fluoren-2-yl)phenyl)isoquinoline-C2,N′)iridium(III)(3-(pyridin-2-yl)-1,2,4-triazolate)(Ir(DMFPQ)₂pt) and bis(1-(3-(9,9-dimethyl-fluoren-2-yl)phenyl)isoquinoline-C2,N′)iridium(III)(2-(2-pyridyl)benzimidazolate)(Ir(DMFPQ)₂pbi) showed red phosphorescent emissions of 615-630 nm in dichloromethane solution. The device fabricated with these complexes doped into a host polyfluorene (PFO) blend with 30% of an electron transport material 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) showed high device efficiencies. Ir(DMFPQ)₂acac exhibited red emission with an external quantum efficiency(η_ext) of 14.3% and luminous efficiency(η_c) of 7.8 cd/A at 1.2 mA/cm² and the maximum brightness reached 10 006 cd/m² (Commission Internationale de I’Eclairage(CIE) chromaticity coordinates: (0.67, 0.32)) at 412 mA/cm². Ir(DMFPQ)₂pt showed a η_ext of 13.0% and η_c of 9.2 cd/A at 17 mA/cm², 1532 cd/m², and the maximum brightness reached 15085 cd/m² (CIE: 0.64, 0.34) at 360 mA/cm².     

Acid-induced degradation of phosphorescent dopants for OLEDs and its application to the synthesis of tris-heteroleptic iridium(III) bis-cyclometalated complexes

Investigations of blue phosphorescent organic light emitting diodes (OLEDs) based on [Ir(2-(2,4-difluorophenyl)pyridine)(2)(picolinate)] (FIrPic) have pointed to the cleavage of the picolinate as a possible reason for device instability. We reproduced the loss of picolinate and acetylacetonate ancillary ligands in solution by the addition of Br?nsted or Lewis acids. When hydrochloric acid is added to a solution of a [Ir(C^N)(2)(X^O)] complex (C^N = 2-phenylpyridine (ppy) or 2-(2,4-difluorophenyl)pyridine (diFppy) and X^O = picolinate (pic) or acetylacetonate (acac)), the cleavage of the ancillary ligand results in the direct formation of the chloro-bridged iridium(III) dimer [{Ir(C^N)(2)(μ-Cl)}(2)]. When triflic acid or boron trifluoride are used, a source of chloride (here tetrabutylammonium chloride) is added to obtain the same chloro-bridged iridium(III) dimer. Then, we advantageously used this degradation reaction for the efficient synthesis of tris-heteroleptic cyclometalated iridium(III) complexes [Ir(C^N(1))(C^N(2))(L)], a family of cyclometalated complexes otherwise challenging to prepare. We used an iridium(I) complex, [{Ir(COD)(μ-Cl)}(2)], and a stoichiometric amount of two different C^N ligands (C^N(1) = ppy; C^N(2) = diFppy) as starting materials for the swift preparation of the chloro-bridged iridium(III) dimers. After reacting the mixture with acetylacetonate and subsequent purification, the tris-heteroleptic complex [Ir(ppy)(diFppy)(acac)] could be isolated with good yield from the crude containing as well the bis-heteroleptic complexes [Ir(ppy)(2)(acac)] and [Ir(diFppy)(2)(acac)]. Reaction of the tris-heteroleptic acac complex with hydrochloric acid gives pure heteroleptic chloro-bridged iridium dimer [{Ir(ppy)(diFppy)(μ-Cl)}(2)], which can be used as starting material for the preparation of a new tris-heteroleptic iridium(III) complex based on these two C^N ligands. Finally, we use DFT/LR-TDDFT to rationalize the impact of the two different C^N ligands on the observed photophysical and electrochemical properties.     

Phosphorescent Cyclometalated Iridium(III) Complexes That Contain Substituted 2‐Acetylbenzo[b]thiophen‐3‐olate Ligand for Red Organic Light‐Emitting Devices

We report the synthesis of a new class of thermally stable and strongly luminescent cyclometalated iridium(III) complexes 1 – 6 , which contain the 2‐acetylbenzo[b]thiophene‐3‐olate (bt) ligand, and their application in organic light‐emitting diodes (OLEDs). These heteroleptic iridium(III) complexes with bt as the ancillary ligand have a decomposition temperature that is 10–20 % higher and lower emission self‐quenching constants than those of their corresponding complexes with acetylacetonate (acac). The luminescent color of these iridium(III) complexes could be fine‐tuned from orange (e.g., 2‐phenyl‐6‐(trifluoromethyl)benzo[d]thiazole (cf₃bta) for 4 ) to pure red (e.g., lpt (Hlpt=4‐methyl‐2‐(thiophen‐2‐yl)quinolone) for 6 ) by varying the cyclometalating ligands (C‐deprotonated C^N). In particular, highly efficient OLEDs based on 6 as dopant (emitter) and 1,3‐bis(carbazol‐9‐yl)benzene (mCP) as host that exhibit stable red emission over a wide range of brightness with CIE chromaticity coordinates of (0.67, 0.33) well matched to the National Television System Committee (NTSC) standard have been fabricated along with an external quantum efficiency (EQE) and current efficiency of 9 % and 10 cd A^?1, respectively. A further 50 % increase in EQE (>13 %) by replacing mCP with bis[4‐(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)phenyl]diphenylsilane (BIQS) as host for 6 in the red OLED is demonstrated. The performance of OLEDs fabricated with 6 (i.e., [(lpt)₂Ir(bt)]) was comparable to that of the analogous iridium(III) complex that bore acac (i.e., [(lpt)₂Ir(acac)]; 6 a in this work) [Adv. Mater.­ 2011 , 23, 2981] fabricated under similar conditions. By using ntt (Hnnt=3‐hydroxynaphtho[2,3‐b]thiophen‐2‐yl)(thiophen‐2‐yl)methanone) ligand, a substituted derivative of bt, the [(cf₃bta)₂Ir(ntt)] was prepared and found to display deep red emission at around 700 nm with a quantum yield of 12 % in mCP thin film.     

Rhodium and iridium complexes of N-heterocyclic carbenes: Structural investigations and their catalytic properties in the borylation reaction

Bridged and unbridged N-heterocyclic carbene (NHC) ligands are metalated with [Ir/Rh(COD)₂Cl]₂ to give rhodium(I/III) and iridium(I) mono- and biscarbene substituted complexes. All complexes were characterized by spectroscopy, in addition [Ir(COD)(NHC)₂][Cl,I] [COD = 1,5-cyclooctadiene, NHC =  1,3-dimethyl- or 1,3-dicyclohexylimidazolin-2-ylidene] (1, 4), and the biscarbene chelate complexes 12 [(η⁴-1,5-cyclooctadiene)(1,1′-di-n-butyl-3,3′-ethylene-diimidazolin-2,2′-diylidene)iridium(I) bromide] and 14 [(η⁴-1,5-cyclooctadiene)(1,1′-dimethyl-3,3′-o-xylylene-diimidazolin-2,2′-diylidene)iridium(I) bromide] were characterized by single crystal X-ray analysis. The relative σ-donor/π-acceptor qualities of various NHC ligands were examined and classified in monosubstituted NHC-Rh and NHC-Ir dicarbonyl complexes by means of IR spectroscopy. For the first time, bis(carbene) substituted iridium complexes were used as catalysts in the synthesis of arylboronic acids starting from pinacolborane and arene derivatives.     

Bis-cyclometalated Ir(III) complexes as efficient singlet oxygen sensitizers

We report the singlet oxygen sensitization properties of a series of bis-cyclometalated Ir(III) complexes (i.e., (bt)2Ir(acac), (bsn)2Ir(acac), and (pq)2Ir(acac); bt = 2-phenylbenzothiazole, bsn = 2-(1-naphthyl)benzothiazole, pq = 2-phenylquinoline, and acac = acetylacetonate). Complexes with acetylacetonate ancillary ligands give singlet oxygen quantum yields near unity (PhiDelta = (0.7-1.0) +/- 0.1), whether exciting the ligand-based state or the lowest energy excited state (MLCT + 3LC). The singlet oxygen quenching rates for these beta-diketonate complexes were found to be small [(5 +/- 2) x 105 to (6 +/- 0.2) x 106 M-1 s-1], roughly 3 orders of magnitude slower than the corresponding phosphorescence quenching rate. Similar complexes were prepared with glycine or pyridine tethered to the Ir(III) center (i.e., (bsn)2Ir(gly) and (bt)2Ir(py)Cl; gly = glycine and py = pyridine). The glycine and pyridine derivatives give high singlet oxygen yields (PhiDelta = (0.7-1.0) +/- 0.1).     

Synthesis and characterization of cyclometalated iridium(III) complexes containing benzoxazole derivatives and different ancillary ligands

The synthesis, structures, electrochemistry, and photophysics of a series of cyclometalated iridium(III) complexes based on benzoxazole derivatives and different β-diketonate ligands are reported. These complexes have a general formula C^∧N₂Ir(LL′) [where C^∧N is a monoanionic cyclometalating ligand; 2-phenylbenzoxazolato (pbo), 2-(4-chlorophenyl)benzoxazolato (cpbo), 2-phenyl-5-chlorobenzoxazolato (pcbo), 2-(3,5-difluorophenyl)benzoxazole (fpbo), or 2-(2-naphthyl)benzoxazolato (nbo), and LL′ is an ancillary ligand; acetylacetonate (acac), dibenzoylmethanate (dbm), or 1,1,1,5,5,5-hexafluoroacetylacetonate (hfacac)]. The complexes (pcbo)₂Ir(acac) (3), (dfpbo)₂Ir(acac) (4), (cpbo)₂Ir(dbm) (7), (dfpbo)₂Ir(dbm) (8), and (dfpbo)₂Ir(hfacac) (9) have been structurally characterized by X-ray crystallography. All of the complexes show reversible oxidation between 0.45 and 1.07 V, versus Fc/Fc⁺, and have short luminescence lifetime (τ = 0.1-1.3 μs) at room temperature. Except complex 9, the radiative decay rate (k_r) and nonradiative decay rate (k_nr) of the (C^∧N)₂Ir(LL′) complexes have been determined by using the lifetime and quantum efficiency. The k_r ranges between 2.0 × 10³ and 3.0 × 10⁵ s⁻¹ and k_nr spans a narrower range of values (5.0 × 10⁵ to 7.0 × 10⁶ s⁻¹).     

Emissive metallomesogens based on 2-phenylpyridine complexes of iridium(III)

Preparation of Ir(III) complexes using anisotropic 2,5-di(4-alkoxyphenyl)pyridine ligands leads to emissive, liquid-crystalline complexes containing bound Cl and dimethyl sulfoxide. Using analogous poly(alkoxy) ligands allows the preparation of bis(2-phenylpyridine)iridium(III) acac complexes, which are also mesomorphic. The observation of liquid crystallinity in octahedral complexes of this type is without precedent.     

Single‐Site Zeolite‐Anchored Organoiridium Carbonyl Complexes: Characterization of Structure and Reactivity by Spectroscopy and Computational Chemistry

A family of HY zeolite‐supported cationic organoiridium carbonyl complexes was formed by reaction of Ir(CO)₂(acac) (acac=acetylacetonate) to form supported Ir(CO)₂ complexes, which were treated at 298 K and 1 atm with flowing gas‐phase reactants, including C₂H₄, H₂, ¹²CO, ¹³CO, and D₂O. Mass spectrometry was used to identify effluent gases, and infrared and X‐ray absorption spectroscopies were used to characterize the supported species, with the results bolstered by DFT calculations. Because the support is crystalline and presents a nearly uniform array of bonding sites for the iridium species, these were characterized by a high degree of uniformity, which allowed a precise determination of the species involved in the replacement, for example, of one CO ligand of each Ir(CO)₂ complex with ethylene. The supported species include the following: Ir(CO)₂, Ir(CO)(C₂H₄)₂, Ir(CO)(C₂H₄), Ir(CO)(C₂H₅), and (tentatively) Ir(CO)(H). The data determine a reaction network involving all of these species.     

The reaction of allene with β-diketonatoiridium(I) complexes: synthesis,properties and crystal structures of bis(η3-allyllic) complexes of iridium(III) and of iridocyclopentane derivatives

Allene reacts with compounds of the type (β-diketonato)Ir(η-C₈H₁₄)₂| (I) to give iridium(III) derivatives of formula (β-diketonato)IrC₁₂H₁₆ (II) in which an allene tetramer i.e. the 2,3,6,7-tetramethyleneoctane-1,8-diyl group, is bonded to the iridium atom by two η₃-allylic groups. The molecular structures of these complexes were deduced by ¹H NMR studies and by single-crystal X-ray analysis of (hfacac)IrC₁₂H₁₆ (IIb). The reactions of the complexes II with hydrogen and with CO are described.The reaction of (acac)Ir(η-C₈H₁₄)₂ with allene, at -78°C, gives a thermally unstable compound of probable stoichiometry (acac)Ir(C₃H₄)₄ (VI). Its low-temperature IR spectrum and its reaction with bromine indicate that VI contains two η²-bonded allene molecules and teh 3,4-dimethyleneiridocyclopentane moiety. VI reacts with pyridine with loss of an allene molecule to give an iridium(III) derivative of formula (acac)Ir(C₆H₈)(C₃H₄)py (IX). Complex IX was shown by single-crystal X-ray analysis to contain the 3,4-dimethyleneiridocyclopentane moiety and one η²-bonded allene molecule.The role of irido cycles as precursors of the bis(allylic) complexes II is discussed.     

A promising phosphorescent iridium complex with fluorine substituents: synthesis, crystal structure, photo- and electro-luminescence performance

In this paper, we report a phosphorescent Ir(III) emitter of Ir(acac-F6)(F-BT)₂, where acac-F6 = 1,1,1,5,5,5-hexafluoropentane-2,4-dione and F-BT = 2-(2-fluorophenyl)benzo[d]thiazole, including its crystal structure, electronic nature, photophysical characteristics, thermal and electrochemical properties. Data suggest that Ir(acac-F6)(F-BT)₂ is a promising emitter with high quantum yield of 0.19 and good thermal stability, along with its proper energy levels for charge carrier transportation. Electroluminescence (EL) devices using Ir(acac-F6)(F-BT)₂ as emitter are also fabricated, and their electroluminescence performances are investigated in detail. The optimal EL device shows a maximum luminance of 27,000 cd/cm² and a peak current efficiency of 8.7 cd/A.     

Synthese,Struktur und Photochemie von Olefiniridium(I)‐Komplexen mit Acetylacetonatoliganden

Synthesis, Structure, and Photochemical Behavior of Olefine Iridium(I) Complexes with Acetylacetonato Ligands The bis(ethene) complex [Ir(κ²‐acac)(C₂H₄)₂] ( 1 ) reacts with tertiary phosphanes to give the monosubstitution products [Ir(κ²‐acac)(C₂H₄)(PR₃)] ( 2 – 5 ). While 2 (R = iPr) is inert toward PiPr₃, the reaction of 2 with diphenylacetylene affords the π‐alkyne complex [Ir(κ²‐acac)(C₂Ph₂)(PiPr₃)] ( 6 ). Treatment of [IrCl(C₂H₄)₄] with C‐functionalized acetylacetonates yields the compounds [Ir(κ²‐acacR^1,2)(C₂H₄)₂] ( 8 , 9 ), which react with PiPr₃ to give [Ir(κ²‐acacR^1,2)(C₂H₄)(PiPr₃)] ( 10 , 11 ) by displacement of one ethene ligand. UV irradiation of 5 (PR₃ = iPr₂PCH₂CO₂Me) and 11 (R² = (CH₂)₃CO₂Me) leads, after addition of PiPr₃, to the formation of the hydrido(vinyl)iridium(III) complexes 7 and 12 . The reaction of 2 with the ethene derivatives CH₂=CHR (R = CN, OC(O)Me, C(O)Me) affords the compounds [Ir(κ²‐acac)(CH₂=CHR)(PiPr₃)] ( 13 – 15 ), which on photolysis in the presence of PiPr₃ also undergo an intramolecular C–H activation. In contrast, the analogous complexes [Ir(κ²‐acac)(olefin)(PiPr₃)] (olefin = (E)‐C₂H₂(CO₂Me)₂ 16 , (Z)‐C₂H₂(CO₂Me)₂ 17 ) are photochemically inert.     

Triplet level-dependent photoluminescence and photoconduction properties of π-conjugated polymer thin films doped by iridium complexes

Triplet energy level-dependent decay pathways of excitons populated on iridium (Ir) complexes within π-conjugated polymeric matrices were studied by means of photoluminescence (PL) and photoconduction action spectroscopy. We chose a set of matrices, poly(9-vinylcarbazole) (PVK), poly[9,9-bis(2-ethylhexyl)fluorene-2,7-diyl] (PF2/6), poly [2-(5′-cyano-5′-methyl-hexyloxy)-1,4-phenylene] (CNPPP), and poly [2-(5′-cyano-5′-methyl-hexyloxy)-1,4-phenylene-co-pridine] (CNPPP-py10 and CNPPP-Py20), having triplet energy levels ranging from 2.2 up to 3.0 eV. As Ir-complex dopants, we selected three phosphorescent emitters, iridium(III)bis(2-(2′-benzothienyl) pyridinato-N-acetylacetonate) (Ir(btp)₂acac), iridium(III)fac-tris(2-phenylpyridine) (Ir(ppy)₃), and iridium(III)bis[(4,6-fluorophenyl)-pyridinato-N,C^2′]picolinate (FIrpic), having triplet energy levels of 2.1, 2.5, and 2.7 eV, respectively. It was found that the triplet emission from the dopants, being populated via energy transfer from the matrices, was strongly dependent on the matching of triplet energy levels between matrix polymers and Ir-complexes. Photocurrent action spectra confirm effective exciton confinement at the dopants sites in the case of PVK matrix systems.     

Photophysical and electrochemical properties of heteroleptic tris-cyclometallated Ir(III) complexes

Some new heteroleptic tris-cyclometallated iridium(III) complexes have been synthesized and fully characterized. Among these iridium(III) complexes, bis(1-phenylpyrazolato-N,C^2′)iridium(III)[5-(2′-pyridyl)tetrazolate] (3) and bis(3-methyl-1-phenylpyrazolato-N,C^2′)iridium(III)[5-(2′-pyridyl)tetrazolate] (4) show excellent quantum yields at room temperature, the electron density being perturbed by introducing the pyridyltetrazole ligand, making k_r > k_nr. This destroys the concept of phenylpyrazole based iridium complexes.     

Novel iridium complex with carboxyl pyridyl ligand for dye-sensitized solar cells: High fluorescence intensity, high electron injection efficiency?

Novel iridium-based sensitizers Iridium(III) bis[2-phenylpyridinato-N,C^2′]-5-carboxylpicolinate) (Ir1), Iridium(III) bis[2-(naphthalen-1-yl) pyridinato-N,C^2′]-5-carboxyl-picolinate) (Ir2), Iridium(III) bis[2-phenylpyridinato-N,C^2′]-4,4′-(dicarboxylicacid)-2,2′-bipyridine (Ir3) were synthesized for sensitization of mesoscopic titanium dioxide injection solar cells. By changing the ligand, the absorption spectra can be extended and molar extinction coefficient was enhanced. The dye-sensitized nanocrystalline TiO₂ solar cells (DSSCs) based on dye Ir3 showed the best photovoltaic performance: a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 85%, a short-circuit photocurrent density (J_sc) of 9.59 mA cm⁻², an open-circuit photovoltage (V_oc) of 0.552 V, and a fill factor (ff) of 0.54, corresponding to an overall conversion efficiency of 2.86% under AM 1.5 sun light. Moreover, the HOMO and LUMO energy levels tuning can be conveniently accomplished by alternating the ligand. The high oxidative potential of Ir3 enables it to be used along with redox electrolyte and the photovoltage was found to be enhanced greatly.     

Iridium(III) Complexes with [−2, −1, 0] Charged Ligand Realized Deep-Red/Near-Infrared Phosphorescent Emission

A series of [−2, −1, 0] charged-ligand based iridium(III) complexes of [Ir(bph)(bpy)(acac)] ( 1 ), [Ir(bph)(2MeO-bpy)(acac)] ( 2 ), [Ir(bph)(2CF₃-bpy)(acac)] ( 3 ), [Ir(bph)(bpy)(2^tBu-acac)] ( 4 ) and [Ir(bph)(bpy)(CF₃-acac)] ( 5 ), which using biphenyl as dianionic ligand [−2], acetylacetone (or its derivatives) as monoanionic ligand [−1], and 2,2′-bipyridine (or its derivatives) as neutral ligand [0] were designed and synthesized. The chemical structures were well characterized. All of the ligands have simple chemical structures, thus further making the complexes have excellent thermal stability and are easy to sublimate and purify. Phosphorescent characteristics with short emission lifetime were demonstrated for these emitters. Notably, all of the complexes exhibit remarkable deep red/near infrared emission, which is quite different from the reported [−1, −1, −1] charged-ligand based iridium(III) complexes. The photophysical properties of these complexes are regularly improved by introducing electron-donating or -withdrawing groups into [−1] or [0] charged-ligand. The related organic light-emitting diodes exhibited deep red/near infrared emission with acceptable external quantum efficiency and low turn-on voltage (<2.6 V). This work provides a new idea for the construction of new type phosphorescent iridium(III) emitters with different valence states of [−2, −1, 0] charged ligands, thus offering new opportunities and challenges for their optoelectronic applications.     

Synthesis and characterization of phosphorescent cyclometalated iridium complexes containing 2,5‐diphenylpyridine based ligands

A series of phosphorescent cyclometalated iridium complexes with 2,5‐diphenylpyridine‐based ligands has been synthesized and characterized to investigate the effect of the simple ligand modification on photophysics, thermostability and electrochemistry. The complexes have the general structure (C^∧N)₂Ir(acac), where C^∧N is a monoanionic cyclometalating ligand [e.g. 2,5‐diphenylpyridyl (dppy), 2,5‐di(4‐methoxyphenyl)pyridyl (dmoppy), 2,5‐di(4‐ethoxyphenyl)pyridyl (deoppy) and 2,5‐di(4‐ethylphenyl)pyridyl (deppy)]. The absorption, emission, cyclic voltammetry and thermostability of the complexes were systematically investigated. The (dppy)₂Ir(acac) has been characterized using X‐ray crystallography. Calculation on the electronic ground state of (dppy)₂Ir(acac) was carried out using B3LYP density functional theory. The highest occupied molecular orbital (HOMO) level is a mixture of Ir and ligand orbitals, while the lowest occupied molecular orbital (LUMO) is predominantly dppy ligand‐based. Electrochemical studies showed the oxidation potentials of (dmoppy)₂Ir(acac), (deoppy)₂Ir(acac), (deppy)₂Ir(acac) were smaller than that of (ppy)₂Ir(acac), while the oxidation potential of (dppy)₂Ir(acac) was larger relative to (ppy)₂Ir(acac). The 10% weight reduction temperatures of these complexes were above that of (ppy)₂Ir(acac). All complexes exhibited intense green photoluminescence, which has been attributed to MLCT triplet emission. The maximum emission wavelengths in CH₂Cl₂ at room temperature were in the range 531–544 nm, which is more red‐shifted than that of (ppy)₂Ir(acac). Copyright © 2005 John Wiley & Sons, Ltd.     

Acid induced acetylacetonato replacement in biscyclometalated iridium(III) complexes

Biscyclometalated iridium(III) complexes with an ancillary acetylacetone ligand, Ir(L)(2)(acac), (L = 2-(benzo[b]thiophen-2-yl)pyridine (btp), 1-phenylisoquinoline (piq), 2-phenylbenzothiazole (bt), 2-phenylpyridine (ppy), acac = deprotonated acetylacetone), demonstrate spectroscopic changes in their UV-Vis absorption and luminescent emission under acidic conditions. Such changes were found to be the same as those observed when certain mercury salts exist in the systems. Because some iridium(III) complexes have sulfur-containing ligands (i.e., btp and bt), a question was then raised as for whether or not the spectroscopic changes are associated with the specific affinity of Hg(2+) to the sulfur atom. Extensive studies performed in this work unambiguously proved that the observed spectroscopic changes were solely the results of the acid induced departure of acac and the follow-up coordination of solvent acetonitrile to the iridium(III) center and that the generally anticipated Hg(2+)-S affinity and its effect on the photophysical properties of iridium(III) luminophores did not play a role.