Microwave-enhanced and ligand-free copper-catalyzed cyanation of aryl halides with K4[Fe(CN)6] in water

Copper-catalyzed cyanation of aryl halides was improved to be more economical and environmentally friendly by using water as the solvent and ligand-free Cu(OAc)₂·H₂O as the catalyst under microwave heating. The suggested methodology was applicable to a wide range of substrates including aryl iodides and activated aryl bromides.     

Potassium hexacyanoferrate(II)--a new cyanating agent for the palladium-catalyzed cyanation of aryl halides

A new advantageous cyanating agent, potassium hexacyanoferrate(II), is described for the palladium-catalyzed cyanation of aryl halides. All cyanide ions on the iron(II) center can be transferred to the aryl halide using palladium(II) acetate and dppf as the catalyst. Under optimized reaction conditions good yields of benzonitriles and unprecedented catalyst productivities are observed.     

Pd-catalyzed cyanation of benzyl chlorides with nontoxic K4[Fe(CN)6]

Non-toxic K₄[Fe(CN)₆] was demonstrated to be effective as a green cyanating agent for the cyanation of alkyl halides using PPh₃/Pd(OAc)₂ as a catalyst system. The presented method allowed a series of benzyl chlorides to be smoothly cyanated in up to 88% yield. In order to avoid or suppress the deactivation of the catalyst, the reaction was required to be performed in a stringent inert ambiance.     

Monodentate phosphorus-coordinated palladium(Ⅱ)complexes as new catalyst for Mizoroki-Heck reaction of aryl halides with electron-deficient olefins

Four novel monodentate phosphorus-coordinated palladium(Ⅱ) complexes derived from 3,5-disubstituted-1H-1,2,4-diazaphospholes were developed as efficient catalyst for Mizoroki-Heck reactions of aryl halides with electron-deficient olefins. The role of these monophosphine ligands in catalysis was illustrated by control experiments using Pd salt and ligands as combined catalyst.     

Triallyl(aryl)silanes serve as a convenient agent for silicon-based cross-coupling reaction of aryl halides

Triallyl(aryl)silanes, stable and easily accessible arylsilanes, were found to react with aryl bromides in the presence of a palladium catalyst (PdCl₂-PCy₃) and tetrabutylammonium fluoride (TBAF) in good yields. The scope of the reaction is broad, and a wide variety of functional groups are tolerant. Allyl groups on Si are readily cleaved upon treatment with TBAF to form fluorosilanes, silanepolyols, siloxanes and/or their mixed forms, which might be responsible for high efficiency of the reaction.     

Regioselective 1,4-conjugate hydrocyanation of dienones using potassium hexacyanoferrate(II) as an eco-friendly cyanide source

A highly regioselective 1,4-conjugate hydrocyanation of dienones using potassium hexacyanoferrate(II) as an original eco-friendly cyanide source, benzoyl chloride as a promoter and potassium carbonate as a catalyst is described. This protocol has advantages of non-toxic cyanating agent, high regioselectivity, high yield, and simple work-up procedure.     

Determination of potassium ions in biodiesel using a nickel(II) hexacyanoferrate-modified electrode

In this work, nickel hexacyanoferrate-modified electrode was developed to determine potassium ions in biodiesel by potentiometry. The modified electrodes exhibit a linear response to potassium ions in the concentration range of 4.0 × 10⁻⁵ to 1.0 × 10⁻² mol L⁻¹, with a detection limit of 1.9 × 10⁻⁵ mol L⁻¹, and a near-Nernstian slope (53–55 mV per decade) at 25 °C. The method developed in this work was compared with flame photometry and the potassium concentration found in biodiesel showed that the modified electrode method gives results similar to those obtained by flame photometry.     

Ruthenium(III) catalyzed oxidation of hexacyanoferrate(II) by periodate in aqueous alkaline medium

Ruthenium(III) catalyzed oxidation of hexacyanoferrate(II) by periodate in alkaline medium is assumed to occurvia substrate-catalyst complex formation followed by the interaction of oxidant and complex in the rate-limiting stage and yield the products with regeneration of catalyst in the subsequent fast step. The reaction exhibits fractional order in hexacyanoferrate(II) and first-order unity each in oxidant and catalyst. The reaction constants involved in the mechanism are derived.     

2-(Trimethylsilyl)ethanesulfonyl amide as a new ammonia equivalent for palladium-catalyzed amination of aryl halides

2-(Trimethylsilyl)ethanesulfonyl amide (SES-NH₂) is an ammonia equivalent for the palladium-catalyzed amination of aryl bromides and aryl chlorides. Using these amine derivatives, it has been observed that anilines and anilines with sensitive functional groups can be readily prepared.     

Intercalation of hydrotalcites with hexacyanoferrate(II) and (III)—a thermoRaman spectroscopic study

Raman spectroscopy using a hot stage indicates that the intercalation of hexacyanoferrate(II) and (III) in the interlayer space of a Mg, Al hydrotalcites leads to layered solids where the intercalated species is both hexacyanoferrate(II) and (III). Raman spectroscopy shows that depending on the oxidation state of the initial hexacyanoferrate partial oxidation and reduction takes place upon intercalation. For the hexacyanoferrate(III) some partial reduction occurs during synthesis. The symmetry of the hexacyanoferrate decreases from O_h existing for the free anions to D_3d in the hexacyanoferrate interlayered hydrotalcite complexes. Hot stage Raman spectroscopy reveals the oxidation of the hexacyanoferrate(II) to hexacyanoferrate(III) in the hydrotalcite interlayer with the removal of the cyanide anions above 250 °C. Thermal treatment causes the loss of CN ions through the observation of a band at 2080 cm⁻¹. The hexacyanoferrate (III) interlayered Mg, Al hydrotalcites decomposes above 150 °C.     

Palladium catalyzed alkynylation of aryl halides (Sonogashira reaction) in water

The palladium catalyzed alkynylation of aryl halides (Sonogashira reaction) has been achieved in pure water without any additives or phase transfer catalysts. The reaction, which requires only 0.5 mol % of Pd(PPh₃)₄ catalyst, is remarkably fast (30 min at 70 °C) producing high yields of the aryl alkyne products.     

Copper-catalyzed direct preparation of diaryl sulfides from aryl iodides using potassium thiocyanate as a sulfur transfer reagent

A method for direct preparation of diaryl sulfides from aryl iodides using potassium thiocyanate as a sulfur-transfer agent is reported. A catalyst system comprising of a simple copper salt, tetrabutylammonium bromide as a phase-transfer agent and water as the solvent is used. Microwave heating at 200 °C for 60 min allows for the conversion of a range of aryl iodides to the corresponding diaryl sulfides.     

An efficient palladium catalytic system for microwave assisted cyanation of aryl halides

Application of a new catalytic system for cyanation reaction of various aryl halides using K₄[Fe(CN)₆] as cyanating source was examined. The reactions were performed under microwave irradiation and results showed that application of this catalytic system and DMF at 130 °C minimized the reaction times from hours to minutes in good to excellent yields.     

Microwave-assisted, Mo(CO)6-mediated, palladium-catalyzed amino-carbonylation of aryl halides using allylamine: from exploration to scale-up

Palladium-catalyzed aminocarbonylations of various (hetero)aryl halides with allylamine using Mo(CO)₆ as a solid, in situ CO source, were explored. Microwave-enhanced conditions proved to be highly useful in promoting the conversions in a mere 10-20 min with various (hetero)aryl iodides, bromides and chlorides. The scale-up of a microwave-enhanced aminocarbonylation to 25 mmol scale was performed successfully.     

Development of a palladium-catalyzed decarboxylative cross-coupling of (2-azaaryl)carboxylates with aryl halides

A catalytic method for the decarboxylative coupling of 2-(azaaryl)carboxylates with aryl halides is described. The decarboxylative cross-coupling presented is mediated by a system catalytic in both palladium and copper without requiring stoichiometric amounts of organometallic reagents or organoboronic acids. This method circumvents additional synthetic steps required to prepare 2-azaaryl organometallics and organoborates as nucleophilic coupling partners, which are prone to protodemetallation and protodeborylation and produce potentially toxic byproducts.     

Palladium(II) chloride/EDTA-catalyzed biaryl homo-coupling of aryl halides in aqueous medium in the presence of ascorbic acid

Both electron-deficient and electron-rich aryl bromides undergo biaryl homo-coupling in a basic aqueous-ethanolic medium in the presence of PdCl₂-EDTA (1:1 molar ratio, 3 mol %) as catalyst and ascorbic acid as reductant (1 mol equiv) in acceptable to good yields.     

Voltammetric determination of isoprenaline in pharmaceutical preparations using a copper(II) hexacyanoferrate(III) modified carbon paste electrode

The electroanalytical determination of isoprenaline in pharmaceutical preparations of a homemade carbon paste electrode modified with copper(II) hexacyanoferrate(III) (CuHCF) was studied by cyclic voltammetry. Several parameters were studied for the optimization of the sensor such as electrode composition, electrolytic solution, pH effect, potential scan rate and interferences in potential. The optimum conditions were found in an electrode composition (in mass) of 15% CuHCF, 60% graphite and 25% mineral oil in 0.5 mol l⁻¹ acetate buffer solution at pH 6.0. The analytical curve for isoprenaline was linear in the concentration range from 1.96×10⁻⁴ to 1.07×10⁻³ mol l⁻¹ with a detection limit of 8.0×10⁻⁵ mol l⁻¹. The relative standard deviation was 1.2% for 1.96×10⁻⁴ mol l⁻¹ isoprenaline solution (n=5). The procedure was successfully applied to the determination of isoprenaline in pharmaceutical preparations; the CuHCF modified carbon paste electrode gave comparable results to those results obtained using a UV spectrophotometric method.     

Carbamic acid 2-trimethylsilylethyl ester as a new ammonia equivalent for palladium-catalyzed amination of aryl halides

Carbamic acid 2-trimethylsilylethyl ester (Teoc-NH₂) serves as an ammonia equivalent in the palladium-catalyzed amination of aryl bromides and aryl chlorides. Anilines with sensitive functional groups can be readily prepared using these amine derivatives.     

Triphenylphosphine-Mediated Eco-Friendly Synthesis of (Z)-Diisopropyl-2-(Cyano(Aryl)Methylene)Hydrazine-1,1-Dicarboxylates Using Potassium Hexacyanoferrate(II) as a Cyanide Source

Abstract

A triphenylphosphine-mediated synthetic method for (Z)-diisopropyl-2-(cyano (aryl)methylene)hydrazine-1,1-dicarboxylates via one-pot three-component reactions using potassium hexacyanoferrate(II) as a cyanide source was described. This protocol has advantages of no use of strong toxic cyanating agents, high yield, and simple work-up procedure.