A micellar electrokinetic chromatography approach using diastereomeric derivatization and a volatile surfactant for the enantioselective separation of selenomethionine

A MEKC methodology with UV detection was developed for the enantioselective separation of selenomethionine (SeMet). The use of (+)‐1‐(9‐fluorenyl)ethyl chloroformate (FLEC) as chiral derivatization reagent to form SeMet diastereomers enabled their subsequent separation using ammonium perfluorooctanoate (APFO) as a volatile pseudostationary phase. The effect of APFO concentration and pH, temperature, injection volume, and derivatization conditions (time and FLEC/SeMet ratio) were evaluated in order to select the best separation conditions. A chiral resolution of 4.4 for DL‐SeMet was achieved in less than 6 min using 100 mM APFO at pH 8.5 as electrophoretic buffer. Satisfactory results were obtained in terms of linearity, precision (RSD from 3.4 to 5.1% for migration times and from 1.8 to 4.6% for corrected peak areas), accuracy, and LODs (3.1 × 10^?6 M and 3.7 × 10^?6 M for d and l enantiomers, respectively). The method was successfully applied to the determination of l ‐SeMet in food supplements.     

Determination of Proteinogenic Amino Acids in Human Plasma by Capillary Electrophoresis with Contactless Conductivity Detection

Capillary electrophoresis (CE) with contactless conductivity detection (CCD) represents a viable alternative to liquid chromatography in the analysis of amino acids (AA) in human plasma. After optimizing the composition of the background electrolyte (BGE), and introducing simple plasma pretreatment to remove spurious protein components, the CE/CCD methods allows determination of 18 from 20 proteinogenic AAs, three nonproteinogenic AAs and creatinine in 60 minutes. AAs are separated in their cationic forms in BGE containing 1.7 M acetic acid and 0.1% hydroxyethylcellulose, pH 2.2. LODs for individual AAs vary in an acceptable range with minimum of 4.3 μM for Arg and maximum of 42.9 μM for Cys. Mean concentrations and concentrations ranges for AAs in human plasma samples from 9 healthy individuals are found to agree well with those determined by an LC method in other two laboratories.     

GC separation of amino acid enantiomers via derivatization with heptafluorobutyl chloroformate and Chirasil‐L‐Val column

Heptafluorobutyl chloroformate (HFBCF), a recently introduced derivatization reagent, was examined in enantioseparation of amino acids (AAs) by GC. Twenty proteinogenic AAs, plus ornithine, cystine and 4‐fluorophenylalanine (internal standard) were treated with the reagent and separation properties of the derivatives were assessed on a Chirasil‐Val capillary column. Nineteen AA enantiomers were efficiently separated in 43 min except proline, arginine and cystine. The HFBCF derivatives of the studied DL ‐AAs show improved separation over other chloroformate‐based derivatives hitherto reported. A combination of the improved and faster separation with a simple derivatization protocol, involving an immediate one‐step reaction–extraction in two‐phase aqueous‐organic medium, and low elution temperatures extend application of HFBCF to chiral AA analysis.     

Characterization of conformers and dimers of antithrombin by capillary electrophoresis-quadrupole-time-of-flight mass spectrometry

Antithrombin (AT) is a plasma glycoprotein which possesses anticoagulant and anti-inflammatory properties. AT exhibits various forms, among which are native, latent and heterodimeric ones. We studied the potential of capillary electrophoresis-mass spectrometry (CE-MS) using a sheath liquid interface, electrospray ionization (ESI), and a quadrupole-time-of-flight (Q-TOF) mass spectrometer to separate and quantify the different AT forms. For CE separation, a neutral polyvinyl alcohol (PVA) coated capillary was employed. The protein conformation was preserved by using a background electrolyte (BGE) at physiological pH. A sheath liquid of isopropanol-water 50:50 (v/v) with 14 mM ammonium acetate delivered at a flow rate of 120 μL h⁻¹ resulted in optimal signal intensities. Each AT form exhibited a specific mass spectrum, allowing unambiguous distinction. Several co-injection experiments proved that latent AT had a higher electrophoretic mobility (μ_ep) than native AT, and that these conformers could associate to form a heterodimer during the CE analysis. The developed CE-MS method enabled the detection and quantitation of latent and heterodimeric forms in a commercial AT preparation stored at room temperature for three weeks.     

Chiral capillary electrophoresis-mass spectrometry of amino acids in foods

In this work, the development of a new chiral capillary electrophoresis-mass spectrometry (CE-MS) method to separate D- and L-amino acids is shown. On-line coupling between CE and MS is established through an electrospray-coaxial sheath flow interface. Enantiomer separation is achieved by using a cheap, nonvolatile, chiral selector as beta-cyclodextrin in the background electrolyte (BGE) together with a physically coated capillary that is aimed to prevent contamination of the electrospray. The capillary coating is simple and easy to obtain as it only requires flushing of the capillary with a polymer aqueous solution for 3 min. Optimization of CE parameters (pH of BGE, type and concentration of chiral selector, and capillary inner diameter) and electrospray-MS parameters (nature and flow rate of the sheath liquid, nebulizer pressure) is carried out. Two different derivatization protocols of amino acids using dansyl chloride (DNS) and fluorescein isothiocyanate (FITC) are compared in terms of MS sensitivity and chiral resolution. Under optimum CE-MS conditions it is observed that the MS sensitivity obtained for FITC- and DNS-amino acids is similar (with limit of detection (LOD) in the microM range, corresponding to amounts injected in the fmol range) while chiral resolution is better for FITC-amino acids. The optimized method is demonstrated to provide the simultaneous analysis of 15 selected amino acids (i.e., FITC-D/L-Asp, -Glu, -Ser, -Asn, -Ala, -Pro, -Arg, and FITC-gamma-aminobutyric acid (GABA) in a single chiral CE-MS run, corresponding to the main amino acids that can be found in orange. Moreover, as a result of the high resolution achieved, it is possible to detect down to 2% of D-Asp in the presence of 98% of L-Asp. The good possibilities of chiral CE-MS in food analysis are corroborated through the detection of the main amino acids in a commercial orange juice (i.e., FITC-L-Asp, -Glu, -Ser, -Asn, -Pro, -Arg, and the nonchiral FITC-GABA) as well as the determination of the fraudulent addition of synthetic amino acids (containing D- and L-forms) to a fresh orange juice.     

Performance of a sheathless porous tip sprayer for capillary electrophoresis-electrospray ionization-mass spectrometry of intact proteins

The performance of a prototype porous tip sprayer for sheathless capillary electrophoresis-mass spectrometry (CE-MS) of intact proteins was studied. Capillaries with a porous tip were inserted in a stainless steel needle filled with static conductive liquid and installed in a conventional electrospray ionization (ESI) source. Using a BGE of 100 mM acetic acid (pH 3.1) and a positively charged capillary coating, a highly reproducible and efficient separation of four model proteins (insulin, carbonic anhydrase II, ribonuclease A and lysozyme) was obtained. The protein mass spectra were of good quality allowing reliable mass determination of the proteins and some of their impurities. Sheath-liquid CE-MS using the same porous tip capillary and an isopropanol-water-acetic acid sheath liquid showed slightly lower to similar analyte responses. However, as noise levels increased with sheath-liquid CE-MS, detection limits were improved by a factor 6.5-20 with sheathless CE-MS. The analyte response in sheathless CE-MS could be enhanced using a nanoESI source and adding 5% isopropanol to the BGE, leading to improved detection limits by 50-fold to 140-fold as compared to sheath liquid interfacing using the same capillary - equivalent to sub-nM detection limits for three out of four proteins. Clearly, the sheathless porous tip sprayer provides high sensitivity CE-MS of intact proteins.     

Quality by design-assisted development of a capillary electrophoresis method for the enantiomeric purity determination of tenofovir

A CE method was developed and validated for the assessment of the chiral purity of the drug tenofovir applying a quality by design approach. Following selection of a quaternary ammonium β-CD as chiral selector, a fractional factorial resolution V+ design was employed for identification of the critical process parameters, while a central composite design served for method optimization. The final method used a 40/50.2 cm, 50 μm id fused-silica capillary, a BGE composed of a 100 mM sodium phosphate buffer, pH 6.4, containing 45 mg/mL quaternary ammonium β-CD, an applied voltage of 18 kV, and a capillary temperature of 22°C. Robustness was assessed by a Plackett–Burman design. The method was validated according to guideline Q2(R1) of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use and enabled the determination of the (S)-enantiomer of tenofovir at the 0.1% level.     

Capillary electrophoresis-mass spectrometry of intact basic proteins using Polybrene-dextran sulfate-Polybrene-coated capillaries: System optimization and performance

A capillary electrophoresis-mass spectrometry (CE-MS) method using sheath liquid electrospray ionization interfacing was studied and optimized for the analysis of intact basic proteins. To prevent protein adsorption, capillaries with a noncovalent positively charged coating were utilized. Capillaries were coated by subsequent rinsing with solutions of Polybrene, dextran sulfate and Polybrene. The coating proved to be fully compatible with MS detection, causing no background signals and ionization suppression. The composition of the sheath liquid and BGE was optimized using the model proteins α-chymotrypsinogen A, ribonuclease A, lysozyme and cytochrome c. A sheath liquid of isopropanol-water-acetic acid (75:25:0.1, v/v/v) at 2 μL min⁻¹ resulted in optimal signal intensities for most proteins, but caused dissociation of the heme group of cytochrome c. Optimum protein responses were obtained with a BGE of 50 mM acetic acid (pH 3.0), which allowed a baseline separation of the test protein mixture. Several minor impurities present in the mixture could be detected and provisionally identified using accurate mass and a protein modification database. The selectivity of the CE-MS system was investigated by the analysis of acetylated lysozyme. Eight highly related species, identified as non-acetylated lysozyme and lysozyme acetylated in various degrees, could be distinguished. The CE-MS system showed good reproducibility yielding interday (three weeks period) RSDs for migration time and peak area within 2% and 10%, respectively. With the CE-MS system, determination coefficients (R²) for protein concentration and peak area were higher than 0.996, whereas detection limits were between 11 and 19 nM.     

Enantioseparation of dansyl amino acids and dipeptides by chiral ligand exchange capillary electrophoresis based on Zn(II)-l-hydroxyproline complexes coordinating with γ-cyclodextrins

A chiral ligand exchange capillary electrophoresis (CLE-CE) method using Zn(II) as the central ion and l-4-hydroxyproline as the chiral ligand coordinating with γ-cyclodextrin (γ-CD) was developed for the enantioseparation of amino acids (AAs) and dipeptides. The effects of various separation parameters, including the pH of the running buffer, the ratio of Zn(II) to l-4-hydroxyproline, the concentration of complexes and cyclodextrins (CDs) were systematically investigated. After optimization, it has been found that eight pairs of labeled AAs and six pairs of labeled dipeptides could be baseline-separated with a running electrolyte of 100.0 mM boric acid, 5.0 mM ammonium acetate, 3.0 mM Zn(II), 6.0 mM l-hydroxyproline and 4.0 mM γ-CD at pH 8.2. The quantitation of AAs and dipeptides was conducted and good linearity (r² ≥ 0.997) and favorable repeatability (RSD ≤ 3.6%) were obtained. Furthermore, the proposed method was applied in determining the enantiomeric purity of AAs and dipeptides. Meanwhile, the possible enantiorecognition mechanism based on the synergistic effect of chiral metal complexes and γ-CD was explored and discussed briefly.     

Rapid stereoselective separations of amphetamine derivatives with highly sulfated gamma-cyclodextrin

The highly sulfated gamma-CD (HS-gamma-CD) is a chiral selector widely used in CE for the enantioseparation of pharmaceutical compounds. This paper investigated different approaches to reduce the stereoselective analysis time of amphetamine (AT) derivatives according to the chiral selector concentration in the BGE. With high HS-gamma-CD concentration, tested analytes were separated in 3.5 min as anionic complexes with short-end injection technique in reversed polarity mode. However, this procedure presented some limitations in terms of efficiency and resolution, excessive Joule heating and poor compatibility with MS detection. With low HS-gamma-CD concentration, compounds were separated as cations. Conventional approaches to reduce CE analysis time demonstrated critical resolution between some analytes. Therefore, the use of the partial-filling technique compatible with MS detection was carried out. Under optimized conditions, the analysis time for the chiral separation of seven AT like compounds was reduced to 6 min. Moreover, sensitivity of CE-MS was sufficient for the determination of ATs in plasma following a simple liquid-liquid extraction.     

Capillary electrophoresis-mass spectrometry analysis of trehalose-6-phosphate in Arabidopsis thaliana seedlings

Trehalose-6-phosphate (T6P) is an intermediate in the plant metabolic pathway that results in trehalose production. T6P has been shown to inhibit the sucrose nonfermenting-1-related protein kinase 1, which is a major regulator of metabolism. The quantitation of T6P has proven difficult due to the complexity of the plant matrix and the low abundance of T6P in plant tissues. The aim of this work was to develop a quantitation method for T6P present in Arabidopsis tissues, with capillary electrophoresis (CE) coupled to electrospray ionization-mass spectrometry (MS) with a sheath liquid (SL) interface. The CE-MS method was first optimized with respect to T6P signal intensity and separation of isomers by studying the composition of the background electrolyte (BGE) and SL. The use of triethylamine (TEA) in the BGE was favorable, providing separation of T6P from sucrose-6-phosphate and minimizing ionization suppression. Replacing ammonium acetate with TEA enhanced T6P signal intensities more than four times. The optimized method allowed quantification of T6P in plant extracts with good linearity (r ² > 0.99) within a biologically relevant concentration range. The limit of quantification was 80 nM in Arabidopsis extracts, corresponding to 33 pmol/g plant fresh weight. The CE-MS method was applied to the determination of T6P in seedlings from wild type (WT) Arabidopsis and mutants lacking the trehalase AtTRE1, tre1-1, challenged with trehalose or sorbitol. T6P accumulation in tre1-1 plants grown on sorbitol was about twice the level of T6P found in WT. CE-MS is shown to be a fast and reliable technique to analyze phosphodisaccharides for seedling extracts. The low sample volume requirement of CE and its direct MS coupling makes it an attractive alternative for anion-exchange liquid chromatography–MS.     

Improving detection sensitivity of amino acids in thyroid tissues by using phthalic acid as a mobile phase additive in hydrophilic interaction chromatography-electrospray ionization-tandem mass spectrometry

In this work, 0.08 mmol L⁻¹ of phthalic acid was introduced as a mobile phase additive to quantify free amino acids (AAs) by hydrophilic interaction liquid chromatography (HILIC) coupled with electrospray ionization tandem mass spectrometry (ESI-MS/MS). The addition of phthalic acid significantly increased the signal intensity of protonated AA ions, resulting from the decrease of the relative abundance of AA sodium adducts. Meanwhile, the chromatographic peak shapes of AAs were optimized. As a consequence, there was a noticeable increase in the sensitivity of detection for AAs. The limits of detection (LOD) and quantification (LOQ) of the AAs ranged from 0.0500 to 20.0 ng mL⁻¹ and from 0.100 to 50.0 ng mL⁻¹, respectively, which were 4–50 times lower compared to the values measured without the addition of phthalic acid. The enhanced detection and separation of AAs were obtained by merely adding phthalic acid to the mobile phase without changing other conditions. Eventually, this simple method was validated and successfully applied to the analysis of twenty-four kinds of free AAs in human thyroid carcinoma and para-carcinoma tissues, demonstrating a significant increase of most AAs in thyroid carcinoma tissues (p < 0.05).     

Analyses of quaternary ammonium drugs in horse urine by capillary electrophoresis-mass spectrometry

A capillary electrophoresis-mass spectrometry (CE-MS) method for the analysis of quaternary ammonium drugs in equine urine was developed. Quaternary ammonium drugs were first extracted from equine urine by ion-pair extraction and then analysed by CE-MS in the positive electrospray ionization (ESI) mode. Within 12 min, eight quaternary ammonium drugs, each at 1 ng/mL in horse urine, could be detected. The confirmation of these drugs in urine samples was achieved by capillary electrophoresis tandem mass spectrometry (CE-MS/MS). A direct comparison of this method was made with existing liquid chromatography/mass spectrometry (LC-MS) methods in the detection and confirmation of glycopyrrolate and ipratropium bromide in horse urine. While the two drugs could be detected within the same CE-MS run at 1 ng/mL in urine, they could only be detected in separate LC-MS runs at 5 ng/mL in urine. In addition, CE-MS consumed a much smaller volume of extract; the analyte peak widths, in some cases, were much narrower; and as the quaternary ammonium ions were well separated electrophoretically from the mainly neutral urine matrix, a much cleaner background in the CE-MS total ion trace was observed.     

Method development for the analysis of particle phase substituted methoxy phenols and aromatic acids from biomass burning using capillary electrophoresis/electrospray ionization mass spectrometry (CE/ESI-MS)

A method is developed for the determination of substituted methoxy phenols and aromatic acids in biomass burning aerosol using capillary electrophoresis (CE) coupled to an electrospray ionization mass spectrometer. Background electrolytes (BGEs) containing ammonium acetate, ammonium hydroxide and 10% (v/v) methanol at pH 9.1 and ammonium hydroxide at pH 11 are investigated for their suitability. A good linearity is found for all analytes in the range of 1-50 microM for the ammonium acetate based BGE and 1-40 microM for the ammonium hydroxide BGE. The detection limit ranged from 0.1 to 1.0 microM for the ammonium acetate based BGE and 0.3 to 0.7 microM for the ammonium hydroxide BGE. The relative standard deviation (R.S.D.) is typically less than 0.5% (ammonium acetate based BGE) and 4.2% (ammonium hydroxide BGE) for the migration time and 3-9% (ammonium acetate based BGE) and 2.5-8% (ammonium hydroxide BGE) for the peak area (n = 5). The analytical time was less than 10 min for both methods. The proposed methods are fast, sensitive and quantitative and can be applied to the analysis of complex biomass burning aerosol samples without complex pre-treatment. The results from the analysis of real biomass burning samples demonstrate the suitability of the proposed methods to the analysis of low concentration water soluble organic carbon (WSOC) in biomass burning samples. The fast analytical time and high sensitivity of the proposed methods enables the analysis of a large number of size segregated impactor samples from biomass burning aerosols.     

Development of a non-aqueous capillary electrophoresis method with UV-visible and fluorescence detection for phenolics compounds in olive oil

Response surface methodology has been applied to the optimization of a simple and rapid non-aqueous capillary electrophoresis method for the separation and determination of several phenolic compounds belonging to the different families present in olive oil. A Box–Behnken design was employed and a total of 27 experiments were performed using olive oil samples spiked with the phenols and injected directly in the capillary after dilution 1:1 with 1-propanol. Finally, the background electrolyte (BGE) was constituted of 25 mM boric acid and 18 mM KOH in a mixture of 74:26 (v/v) 1-propanol/methanol. The hydrophobicity of the BGE allows its miscibility with the olive oil and, as a consequence, the possibility of characterizing and determining these kinds of compounds in this sample without any pretreatment. A hydrodynamic injection (6 s, −30 mbar) was applied and the separation was carried out using 35 °C and +20 kV of separation temperature and voltage, respectively. A capillary with two detection windows for serial online UV and fluorescence detection was satisfactorily employed. The validation of the method was carried out by setting the calibration curves, and the figures of merit were finally obtained. A lineal relationship between the corrected peak area and concentration and limits of detection in the order of micrograms per milliliter were found.     

Chiral separation of raltitrexed by cyclodextrin-modified micellar electrokinetic chromatography

A rapid and effective method was developed for the chiral separation of raltitrexed (RD) enantiomers by carboxymethyl-beta-cyclodextrin (CM-β-CD)-modified micellar electrokinetic chromatography (MEKC). Optimization of conditions including the type and concentration of the chiral selector, concentration of sodium dodecyl sulfate (SDS), pH and concentration of the background electrolyte (BGE), capillary temperature, and applied voltage was investigated. The enantiomers of raltitrexed could be separated with satisfactory resolution and linear response by using 75 mM Tris-phosphate at pH 8.0 containing 30 mM SDS and 8 mM CM-β-CD as buffer system. Furthermore, the usefulness of this method was demonstrated in a purity test of a real synthetic drug sample. Figure Chiral separation of raltitrexed by CM-β-CD MEKC was optimized and applied to test the purity of a synthetic drug sample     

Separation of enantiomers by capillary electrophoresis-mass spectrometry employing a partial filling technique with a chiral crown ether

Enantiomer separations were performed by capillary electrophoresis-mass spectrometry (CE-MS) with (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid (18C6H4) as a chiral selector. In order to prevent the introduction of the nonvolatile chiral, selector, 18C6H4, into the nozzle of the CE-MS interface and/or the orifice plate, a partial filling technique was employed in this study. By the partial filling technique, the contamination caused by the nonvolatile chiral selector was avoided not only during the analysis but also during the washing of capillary with the separation solution prior to the run. Several racemic compounds having a primary amino group were successfully separated. Racemic 3-aminopyrrolidine and racemic alpha-amino-epsilon-caprolactam have no strong UV absorption, but such compounds were detected with a high sensitivity by MS detection. In this paper, the effects of the length of separation zone and those of the 18C6H4 concentration were described. As the length of the separation zone was longer or as the concentration of 18C6H4 was higher, the enantiomer resolution was enhanced more and more. However, the optimization of 18C6H4 concentration was practically enough to obtain the baseline separation.     

Enantioseparation of warfarin and its metabolites by capillary zone electrophoresis

A capillary zone electrophoresis (CZE) method with direct ultraviolet (UV)-absorbance detection is presented for the simultaneous enantiomeric separation of warfarin and its main metabolites, including warfarin alcohols, 4'-, 6-, and 7-hydroxywarfarin, using highly sulfated beta-cyclodextrin (HS-beta-CD) as the chiral selector. This chiral separation method was optimized in terms of the electrophoretic parameters, which included the concentration of HS-beta-CD used, the type and composition of organic modifier added to the background electrolyte (BGE) buffer, and the BGE buffer pH. Chiral separation of warfarin and its major metabolites was achieved with high resolution, selectivity, efficiency, repeatability, and reproducibility. This optimized chiral analysis of warfarin along with its metabolites was completed within a satisfactory electrophoresis time of 20 min.     

Optimization of background electrolyte composition for simultaneous contactless conductivity and fluorescence detection in capillary electrophoresis of biological samples

In this article, optimization of BGE for simultaneous separation of inorganic ions, organic acids, and glutathione using dual C⁴D‐LIF detection in capillary electrophoresis is presented. The optimized BGE consisted of 30 mM 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid, 15 mM 2‐amino‐2‐hydroxymethyl‐propane‐1,3‐diol, and 2 mM 18‐crown‐6 at pH 7.2 and allowed simultaneous separation of ten inorganic anions and cations, three organic acids and glutathione in 20 min. The samples were injected hydrodynamically from both capillary ends using the double‐opposite end injection principle. Sensitive detection of anions, cations, and organic acids with micromolar LODs using C⁴D and simultaneously glutathione with nanomolar LODs using LIF was achieved in a single run. The developed BGE may be useful in analyses of biological samples containing analytes with differing concentrations of several orders of magnitude that is not possible with single detection mode.     

A novel chiral ligand exchange capillary electrophoresis system with amino acid ionic liquid as ligand and its application in screening d-amino-acid oxidase inhibitors

A novel amino acid ionic liquid (AAIL) with l-ornithine (l-Orn) as anion was successfully synthesized, and subsequently applied as an available chiral ligand coordinated with Zn(ii) in a chiral ligand exchange capillary electrophoresis (CLE-CE) system for the enantioseparation of dansyl amino acids (Dns-d,l-AAs). The influence of key parameters, such as buffer pH, concentration ratio of Zn(ii) to ligand and complex concentration, was investigated in detail. Eleven pairs of Dns-d,l-AAs enantiomers were baseline separated and three pairs were partly separated under the optimum conditions. For exploring its potential application, the quantitative features of this proposed method were studied. Good linearity (r(2) = 0.999) and favorable repeatability (RSD ≤ 3.4%) were obtained by using Dns-d,l-Met as the test analyte. Finally, this method was employed to investigate the inhibition efficiency of d-amino acid oxidase (DAAO) inhibitors, which may pave a new way for the high-throughput screening of enzyme inhibitors and relevant drug discovery.