Liquid chromatography methodologies for the determination of steroid hormones in aquatic environmental systems

Steroid hormones are a diverse group of natural and synthetic compounds. Their wide use in human and veterinary medicine results in their continual introduction into the environment. In recent years, environmental concern over steroids that act as endocrine disruptors has increased because of their adverse effects on organisms or their progeny. Moreover, as these compounds are not totally removed from sewage in wastewater treatment plants, they can reach the aquatic environment and persist due to their physicochemical characteristics.For this reason, a major trend in analytical chemistry is the development of rapid and efficient procedures for the extraction, determination and quantification of steroid hormones in environmental samples. Over the past few decades, the significant expansion of liquid chromatography technology utilizing mass spectrometry detection has led to applications with increased selectivity and sensitivity. Optimized extraction and microextraction techniques combined to these liquid chromatography techniques have lowered detection and quantification limits to the ng L⁻¹–μg L⁻¹ range, which is the concentration of steroid hormones in liquid, solid and biota samples.In this paper, the state-of-the-art techniques for the analysis of steroid hormones focused mainly in based liquid chromatography methods in liquid and aquatic solid and biota samples are reviewed. Handling, storage, extraction and detection methodologies are reviewed and compared for all families of steroid hormones.     

Extraction of male steroids and progesterone from water by vegetable oil gels and their determination by partial filling capillary micellar electrokinetic chromatography

Microemulsion gels were synthetized from macadamia, linseed, olive, walnut, rapeseed, sesame, and coconut oils and frying oil made from sunflower, palm, and rapeseed oils. The gels were similar as polyacrylamide–based gels with exception of replacing dodecyl sulfate with vegetable oils. The gels were modified with celluloses, cotton, or lignin to make the emulsions sustainable for water purification. They were used to compare sorption properties when they were used as solid‐phase adsorbents in isolation of steroids from water. Hydrophobicity features of the gels were compared by detecting adsorption and extraction efficiency of nonpolar androstenedione, testosterone, and progesterone, which exist in wastewater and drinking water. Quantification was done with partial filling–micellar electrokinetic chromatography with 29.5 mM sodium dodecyl sulfate–3.4 mM sodium taurocholate as the micelle and 20 mM ammonium acetate (pH 9.68) as the electrolyte. UV‐detection was used. Methanol was the best eluent for extraction of steroids from gels. The highest recoveries were from frying oil and rapeseed oil gels modified with celluloses. They also possessed the best floating properties on water surface. Lignin modified gels were too hydrophilic, when in touch with water they filled up with water. They also had the lowest capacity.     

New way to quantify multiple steroidal compounds in wastewater by comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry

The applicability of comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry to the screening of steroidal compounds in wastewater is demonstrated. Advanced software was utilized to identify unknown compounds in complex two-dimensional chromatograms exploiting retention indices and two different mass spectral databases. Response factors calculated as a function of the individual mass spectra of six commercial standards at different concentrations were used to develop a model allowing the quantitation of all steroidal compounds identified in the sample. The model, based on partial least squares regression equations, provided good accuracy (prediction error < 16%) in the quantitation of steroidal compounds, so offering a valuable alternative to conventional quantitation methods where reference compounds are required for the verification of analytical measurements. Special attention was paid to the development of an exhaustive sample preparation method for the separate analysis of conjugated and free steroids in both water phase and suspended solid particles. The method, including the exploitation of chemometrics, was successfully applied to the determination of steroidal compounds in effluent and influent waters collected at a local wastewater treatment plant.     

The preparation of high-capacity boronate affinity adsorbents by surface initiated reversible addition fragmentation chain transfer polymerization for the enrichment of ribonucleosides in serum

Boronate affinity adsorption is uniquely selective for cis-diol-containing molecules. The preparation and application of boronate affinity materials has attracted much attention in recent years. In this work, a high-capacity boronate affinity adsorbent was prepared by surface-initiated reversible addition–fragmentation chain transfer polymerization (SI-RAFT). Commercial aminated poly(glycidyl methacrylate) (PGMA) microspheres were modified with the chain transfer agent (CTA) S-1-dodecyl-S-(α,α-dimethyl-α-acetic acid)trithiocarbonate (DDATC). Boronate-affinity adsorbents were then prepared via SI-RAFT polymerization employing 3-acrylamidophenylboronic acid (AAPBA) as the monomer. The Fourier transform infrared spectroscopy (FT-IR), nitrogen adsorption and desorption measurements have proven the successful grafting of AAPBA on PGMA microspheres surface. The boronate affinity adsorbents thus prepared possess much higher adsorption capacity (99.2 µmol/g of adenosine) and both faster adsorption and desorption speed towards ribonucleosides, the adsorption and desorption could be completed in 2 min. The high selectivity of the adsorbents to ribonucleosides was verified in the presence of a large excess of deoxynucleosides. The boronate affinity adsorbents were then employed for sample pretreatment before HPLC analysis of ribonucleosides in serum. The ribonucleosides were effectively enriched by boronate affinity dispersive solid-phase extraction (BA-DSPE), with high mass recoveries and good precision. The simultaneous determination of uridine and guanosine in calf serum was achieved by utilizing the standard addition method, their contents were determined to be 170 ± 11.6 ng/mL and 39.6 ± 4.4 ng/mL respectively. The results proved that the prepared boronate affinity materials could be applied for sample pretreatment of cis-diol containing molecules in biological samples.     

Trace analysis of antidepressants in environmental waters by molecularly imprinted polymer-based solid-phase extraction followed by ultra-performance liquid chromatography coupled to triple quadrupole mass spectrometry

This paper presents the development, optimization, and validation of an innovative method to analyze trace concentrations of seven selected psychoactive pharmaceuticals in environmental waters. Hereby, the solid-phase extraction (SPE) potential of molecularly imprinted polymers (MIPs) in terms of extraction recovery, breakthrough, precision, and selectivity is studied for the first time. Instrumental analysis by ultra-performance liquid chromatography coupled to triple quadrupole mass spectrometry allowed a rapid (run time = 7.5 min) and sensitive (instrumental detection limit ≤7 pg injected) quantification of the target analytes. A systematic optimization study revealed that, among the seven compounds of interest, mainly the selective serotonin reuptake inhibitors paroxetine, fluoxetine, and citalopram are selectively retained on the MIPs. Experiments performed in spiked river water, sewage treatment plant (STP) effluent and influent showed for these compounds extraction recoveries higher than 70%, breakthrough volumes up to 200 mL, method detection limits (MDL) as low as 0.5 ng/L, and good precision (exemplified by relative standard deviations better than 15%, n ≥ 3). Compared to the widely used hydrophilic–lipophilic balanced (HLB) polymers, the newly developed MIPs indicated to be more resistant toward matrix effects induced ion signal suppression particularly when dealing with relative dirty samples like STP influents. As a result of the better selectivity, the MDL obtained with the MIP-based SPE method was up to a factor of 7 lower compared to those obtained with a recently reported multi-residue HLB method. However, optimizing a HLB method in terms of selectivity, e.g., by introducing a stronger washing protocol, can significantly reduce its MDL up to values approximating those obtained with MIPs.     

Comparison of High Performance Liquid Chromatography Methods with Different Detectors for Determination of Steroid Hormones in Aqueous Matrices

This paper presents the development and comparison of procedures for the qualitative and quantitative determination of five estrogenic compounds (17-α-ethynylestradiol, estrone, estradiol, estriol, and progesterone) in drinking water and wastewater samples. Five extraction columns and two disks were tested for their efficiency. The C₁₈ columns were superior on the basis of cost for solid phase extraction of drinking water or sewage. However, the best recoveries were achieved using extraction disks. High-performance liquid chromatography with diode array, fluorescence, and tandem mass spectrometry detectors were compared for selectivity, repeatability, and linearity of response. Solid phase extraction with high-performance liquid chromatography and tandem mass spectrometry was the most sensitive, efficient, and precise for the determination of hormones in drinking water and wastewater. This method satisfied analytical validation criteria and was characterized by a low limit of detection at the pg-ng/L level. The study also considered challenges that emerged for steroidal hormone determination in aqueous samples.     

Comparison of molecularly imprinted,mixed-mode and hydrophilic balance sorbents performance in the solid-phase extraction of amphetamine drugs from wastewater samples for liquid chromatography–tandem mass spectrometry determination

Recent studies have shown that amphetamines and other drugs of abuse residues occur in wastewater. Consequently, several methods have been developed for their determination by solid-phase extraction (SPE) and liquid chromatography–tandem mass spectrometry (LC–MS/MS). However, a major drawback of these methods is the lack of selectivity during SPE that results in reduced sensitivity, due to matrix effects, and in some cases in low precision and poor accuracy. In order to tackle this problem, three different SPE alternatives have been evaluated in this work for the determination of five amphetamines: common hydrophilic balance (Oasis HLB), mixed-mode (Oasis MCX) and molecularly imprinted polymers (MIPs) sorbents. Among them, Oasis HLB showed the worst performance, as three amphetamines (MDA, MDMA and MDEA) could not be determined because of interfering signals in the LC–MS/MS chromatogram, and amphetamine recoveries could not be corrected by the use of the deuterated analogue internal standard. Oasis MCX permitted the determination of all target analytes, but with still strong signal suppression: ca. 70% signal drop with wastewater samples, which could in this case be corrected by the internal standards providing acceptable trueness (overall recoveries: 101–137%), precision (RSD: 2.0–12%) and limits of detection (LOD: 1.5–4.4 ng/L). Alternatively, MIPs rendered cleaner extracts with less matrix effects (ca. 30% signal drop), and thus lower LODs (0.5–2.7 ng/L) and even better trueness (91–114% overall recovery) and precision (1.5–4.4%RSD). The final application of the method with MIP cartridges showed the presence of MDA and MDMA in the seven analysed wastewaters at the 4–20 ng/L level.     

Fabrication of polymer‐modified magnetic nanoparticle based adsorbents for the capture and release of quinolones by manipulating the metal–coordination interaction

Functional polymers with a metal–coordination interaction have been fabricated for sample pretreatment. Poly(N‐4‐vinyl‐benzyl iminodiacetic acid‐co‐methacrylic acid‐co‐styrene)‐modified magnetic nanoparticles were prepared and used as solid‐phase extraction adsorbents for the analysis of quinolones by tuning the metal–coordination interaction. In the construction of the polymer‐based adsorbents, functional monomer (N‐(4‐vinyl)‐benzyl iminodiacetic acid) and comonomers (methacrylic acid and styrene) were fabricated onto the magnetic nanoparticles by free radical polymerization. Factors affecting the performance of the adsorbents were investigated, and the results revealed that Fe³⁺ played a vital role in the formation of metal–coordination adsorbents. Compared with other compounds, the resultant adsorbents displayed good selectivity to quinolones due to the metal–coordination complex (N‐4‐vinyl‐benzyl iminodiacetic acid‐Fe³⁺‐quinolones). Interestingly, the captured quinolones could be rapidly released by manipulating the metal–coordination interaction with Cu²⁺. The linearity range for analysis of the test quinolones was 0.025–2.0 μg/mL (R² > 0.999), and the recovery varied from 80.0 to 100.7%. Further, the proposed adsorbents were combined with high‐performance liquid chromatography for the analysis of quinolones in real urine samples. The results demonstrated that the prepared adsorbents have good selectivity and sensitivity for quinolones, showing great potential for drug analysis in real samples.     

Study of the matrix effect on the determination of nonconjugated xenobiotics in human urine by high-performance liquid chromatography/tandem mass spectrometry

Factors affecting the sensitivity and selectivity of the determination of diuretics, anabolic steroids, central nervous system stimulants, and narcotics in the analysis of human urine extracts by high-performance liquid chromatography-tandem mass spectrometry with atmospheric pressure electrospray ionization and recording of positive ions were investigated. Mass spectra were obtained for all of the test compounds; the characteristic ions, retention times, detection limits, degree of ionization suppression by the matrix, the extraction of the analytes from human biological fluids were determined for all analytes; the selectivity and specificity of determination were evaluated.     

Determination of organic priority pollutants and emerging compounds in wastewater and snow samples using multiresidue protocols on the basis of microextraction by packed sorbents coupled to large volume injection gas chromatography–mass spectrometry analysis

This paper describes the development and validation of a new procedure for the simultaneous determination of 41 multi-class priority and emerging organic pollutants in water samples using microextraction by packed sorbent (MEPS) followed by large volume injection–gas chromatography–mass spectrometry (LVI–GC–MS). Apart from method parameter optimization the influence of humic acids as matrix components on the extraction efficiency of MEPS procedure was also evaluated. The list of target compounds includes polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), phthalate esters (PEs), nonylphenols (NPs), bisphenol A (BPA) and selected steroid hormones. The performance of the new at-line microextraction-LVI–GC–MS protocol was compared to standard solid-phase extraction (SPE) and LVI–GC–MS analysis. LODs for 100 mL samples (SPE) ranged from 0.2 to 736 ng L⁻¹ were obtained. LODs for 800 μL of sample (MEPS) were between 0.2 and 266 ng L⁻¹. In the case of MEPS methodology even a sample volume of only 800 μL allowed to detect the target compounds. These results demonstrate the high sensitivity of both procedures which permitted to obtain good recoveries (>75%) for all cases. The precision of the methods, calculated as relative standard deviation (RSD) was below 21% for all compounds and both methodologies. Finally, the developed methods were applied to the determination of target analytes in various samples, including snow and wastewater.     

Feasibility of desorption atmospheric pressure photoionization and desorption electrospray ionization mass spectrometry to monitor urinary steroid metabolites during pregnancy

Steroids have important roles in the progress of pregnancy, and their study in maternal urine is a non-invasive method to monitor the steroid metabolome and its possible abnormalities. However, the current screening techniques of choice, namely immunoassays and gas and liquid chromatography–mass spectrometry, do not offer means for the rapid and non-targeted multi-analyte studies of large sample sets. In this study, we explore the feasibility of two ambient mass spectrometry methods in steroid fingerprinting. Urine samples from pregnant women were screened by desorption electrospray ionization (DESI) and desorption atmospheric pressure photoionization (DAPPI) Orbitrap high resolution mass spectrometry (HRMS). The urine samples were processed by solid phase extraction for the DESI measurements and by enzymatic hydrolysis and liquid–liquid-extraction for DAPPI. Consequently, steroid glucuronides and sulfates were detected by negative ion mode DESI–HRMS, and free steroids by positive ion mode DAPPI–HRMS. In DESI, signals of eleven steroid metabolite ions were found to increase as the pregnancy proceeded, and in DAPPI ten steroid ions showed at least an order of magnitude increase during pregnancy. In DESI, the increase was seen for ions corresponding to C18 and C21 steroid glucuronides, while DAPPI detected increased excretion of C19 and C21 steroids. Thus both techniques show promise for the steroid marker screening in pregnancy.     

A simple approach for the preparation of simazine molecularly imprinted nanofibers via self-polycondensation for selective solid-phase microextraction

A novel molecularly imprinted sol-gel material based on polysiloxane nanofiber was introduced as a solid-phase microextraction coating on a stainless steel wire for the extraction of simazine. The nanostructured molecularly imprinted fiber was prepared by a simple single step method at room temperature, using methyltriethoxysilane as the sol-gel precursor and simazine as the template molecule. The fiber was applied for the extraction of simazine in different water samples followed by gas chromatography and mass spectrometry detection. The extraction capacity of the molecularly imprinted fiber was 8 ng, and it had better extraction efficiency than the non-imprinted fiber and commercial fibers (PDMS and PA). The fiber had also a good selectivity for simazine and its analogous compounds. Important parameters affecting the extraction and desorption efficiency, such as salt concentration, stirring rate, pH of sample solution, extraction time and temperature, temperature and time of desorption, were investigated. The intra- and inter-day relative standard deviations were in the range of 4.3–7.6%. The fiber-to-fiber reproducibility was 7.7–8.5%. The method showed a good linearity (r²> 0.9980) in the range of 0.02–20 μg L⁻¹ with the detection limit of 0.005 μg L⁻¹. The relative recoveries were also in the range of 94–97% for different water samples.     

Evaluation of two sample treatment methodologies for large-scale pesticide residue analysis in olive oil by fast liquid chromatography–electrospray mass spectrometry

In this study, a comprehensive evaluation of two simple sample treatment methodologies has been carried out for the development of large-scale multi-residue methods for pesticide testing in olive oil. The proposed methodologies are based on (a) liquid–liquid partitioning with acetonitrile followed by dispersive solid-phase extraction clean-up using graphitized carbon black, primary-secondary amine and C₁₈ sorbents; (b) liquid partitioning with acetonitrile saturated with petroleum ether followed by matrix solid-phase dispersion (MSPD) using aminopropyl as sorbent material and a Florisil cartridge for final clean-up in the elution step. To evaluate the proposed sample treatment methodologies, 105 representative multi-class pesticides were studied using fast liquid chromatography–electrospray time-of-flight mass spectrometry (LC–TOFMS). For validation purposes, recoveries studies were carried out at 10 and 100 μg kg⁻¹ levels, yielding recovery rates in the range 70–130% for 72% of analytes using liquid–liquid procedure and for 57% analytes using MSPD procedure. The LC–MS method provided good linearity, precision and accuracy. The limits of detection obtained were lower than 10 μg kg⁻¹ for more than 85% analytes using both sample treatment methodologies. In addition, minor matrix effects (i.e. signal suppression or enhancement ≤20%) were observed in ca. 70% of the studied compounds. Data obtained shows that both sample treatment methodologies proposed can be successfully applied for large-scale pesticide testing in olive oil samples, showing the ability to quickly detect trace amount of over one hundred target species with different physicochemical properties, without requiring expensive instrumentation for sample treatment step and involving relatively low amounts of solvent consumption and waste generation.     

Extraction and identification of matrine‐type alkaloids from Sophora moorcroftiana using double‐templated molecularly imprinted polymers with HPLC–MS/MS

Double‐templated molecularly imprinted polymers with specific recognition of three matrine‐type alkaloids were prepared using matrine and oxymatrine as the template molecules. An approach based on double‐templated molecularly imprinted solid‐phase extraction coupled with high‐performance liquid chromatography and tandem mass spectrometry was then developed to extract and purify matrine, oxymatrine, and sophocarpine from Sophora moorcroftiana in the Tibetan plateau herbs. The polymers were characterized by Fourier‐transform infrared spectroscopy and scanning electron microscopy. Their adsorption characteristics were evaluated using adsorption kinetics, isotherms, selectivity, and recycling experiments. This polymer exhibited excellent molecular recognition ability and good selectivity. The obtained polymers as adsorbent was further used for the determination of three matrine‐type alkaloids coupled to high‐performance liquid chromatography with tandem mass spectrometry, the recoveries of three matrines spiked at three concentration levels in samples were 73.25–98.42% (n = 5) with a relative standard deviation less than 6.82%. The limits of detection for the method were 9.23–15.42 μg/kg (S/N = 3). This proposed method was assessed to be an effective method for simultaneous extraction, isolation, and identification of matrine, oxymatrine, and sophocarpine from Sophora moorcroftiana.     

Molecularly imprinted spin column extraction coupled with high‐performance liquid chromatography for the selective and simple determination of trace nitrophenols in water samples

In this study, we developed a simple and selective spin column extraction technology utilizing hydrophilic molecularly imprinted polymers as the sorbents for extracting nitrophenol pollutants in water samples (the East Lake, the Yangtze River, and wastewater). The whole procedure was achieved by centrifugation of the spin column, and multiple samples were simultaneously processed with a low volume of solvent and without evaporation. Under the optimized condition, recoveries of nitrophenol compounds on the spin column packed with hydrophilic molecularly imprinted polymers ranged from 87.3 to 92.9% and an excellent purification effect was obtained. Compared with activated carbon, multi‐walled carbon nanotubes, LC‐C₁₈ sorbents, hydrophilic molecularly imprinted polymers exhibited a highly selective recognition ability for nitrophenol compounds and satisfactory sample extraction efficiency. Subsequently, the spin column extraction coupled with high‐performance liquid chromatography was established, which was found to be linear in the range of 2–1000 ng/mL for 2,4‐dinitropehnol and 2‐nitrophenol, and 6–1000 ng/mL for 4‐nitrophenol with correlation coefficients greater than 0.998. The detection limits ranged from 0.3–0.5 ng/mL. It is shown that the proposed method can be used for the determination of trace nitrophenol pollutants in complex samples, which is not only beneficial for water quality analysis but also for environmental risk assessment.     

Solid-phase microextraction of phthalate esters in water sample using different activated carbon-polymer monoliths as adsorbents

In this study, the application of different activated carbon-polymer (AC-polymer) monoliths as adsorbents for the solid-phase microextraction (SPME) of phthalate esters (PAEs) in water sample were investigated. The activated carbon (AC) was embedded in organic polymers, poly(butyl methacrylate-co-ethylene dimethacrylate) (poly(BMA-EDMA)) or poly(styrene-co-divinylbenzene) (poly(STY-DVB)), via a 5-min microwave-assisted or a 15-min water bath heating polymerization. Preliminary investigation on the performance of the native poly(BMA-EDMA) and poly(STY-DVB) demonstrated remarkable adsorption efficiencies for PAEs. However, due to the strong hydrophobic, π-π, and hydrogen bonding interactions between the analytes and polymers, low extraction recoveries were achieved. In contrast, the presence of AC in native polymers not only enhanced the adsorption efficiencies but also assisted the PAE desorption, especially for AC-poly(STY-DVB) with extraction recovery ranged of 76.2–99.3%. Under the optimized conditions, the extraction recoveries for intra-, inter-day and column-to-column were in the range of 76.5–100.8% (<3.7% RSDs), 77.2–97.6% (<5.6% RSDs) and 75.5–99.7% (<6.2% RSDs), respectively. The developed AC-poly(STY-DVB) monolithic column showed good mechanical stability, which can be reused for more than 30 extraction times without any significant loss in the extraction recoveries of PAEs. The AC-poly(STY-DVB) monolithic column was successfully applied in SPME of PAEs in water sample with extraction recovery ranged of 78.8%–104.6% (<5.5% RSDs).     

Enhanced binding capacity of boronate affinity adsorbent via surface modification of silica by combination of atom transfer radical polymerization and chain-end functionalization for high-efficiency enrichment of cis-diol molecules

Boronate affinity materials have been widely used for specific separation and preconcentration of cis-diol molecules, but most do not have sufficient capacity due to limited binding sites on the material surface. In this work, we prepared a phenylboronic acid-functionalized adsorbent with a high binding capacity via the combination of surface-initiated atom transfer radical polymerization (SI-ATRP) and chain-end functionalization. With this method, the terminal chlorides of the polymer chains were used fully, and the proposed adsorbent contains dense boronic acid polymers chain with boronic acid on the chain end. Consequently, the proposed adsorbent possesses excellent selectivity and a high binding capacity of 513.6 μmol g⁻¹ for catechol and 736.8 μmol g⁻¹ for fructose, which are much higher than those of other reported adsorbents. The dispersed solid-phase extraction (dSPE) based on the prepared adsorbent was used for extraction of three cis-diol drugs (i.e., epinephrine, isoprenaline and caffeic acid isopropyl ester) from plasma; the eluates were analyzed by HPLC-UV. The reduced amount of adsorbent (i.e., 2.0 mg) could still eliminate interferences efficiently and yielded a recovery range of 85.6–101.1% with relative standard deviations ranging from 2.5 to 9.7% (n = 5). The results indicated that the proposed strategy could serve as a promising alternative to increase the density of surface functional groups on the adsorbent; thus, the prepared adsorbent has the potential to effectively enrich cis-diol substances in real samples.     

Ion suppression in the determination of clenbuterol in urine by solid-phase extraction atmospheric pressure chemical ionisation ion-trap mass spectrometry

Ion suppression effects were observed during the determination of clenbuterol in urine with solid-phase extraction/multiple-stage ion-trap mass spectrometry (SPE/MS(3)), despite the use of atmospheric pressure chemical ionisation. During SPE, a polymeric stationary phase (polydivinylbenzene) was applied. Post-cartridge infusion of analyte to the SPE eluate after the extraction of blank urine was performed to obtain a profile of the suppression. Single and multiple-stage MS were performed to provide insight in the suppressing compounds. The ion suppression was mainly ascribed to two m/z values, but still no identification of the compounds was achieved from the multiple-stage MS data. No ionisable and non-ionisable complexes and/or precipitation of clenbuterol with matrix compounds were observed. A concentration dependence of the percentage of suppression was observed. Up to 70% of the signal was suppressed upon post-cartridge infusion of 0.22 microg/mL (at 5 microL/min) clenbuterol into the eluate, and this decreased to about 4% at infusion of 22 microg/mL clenbuterol. Molecularly imprinted polymers were used to enhance the selectivity of the extraction. Although matrix components were still present after extraction, no interference of these compounds with the analyte was observed. However, the bleeding of the imprint from the polymer (brombuterol) caused significant ion suppression.     

Synthesis of a molecularly imprinted polymer and its application for microextraction by packed sorbent for the determination of fluoroquinolone related compounds in water

Molecularly imprinted polymer (MIP) has been synthesized by precipitation polymerization using ciprofloxacin (CIP) as template for the analysis of fluoroquinolone antibiotics (FQs). This MIP material was packed as sorbent in a device for microextraction by packed sorbent (MEPS) combined with liquid chromatography–tandem mass spectrometry (LC–MS/MS) for the analysis of selected FQs drugs including CIP, norfloxacin (NOR) and ofloxacin (OFLO) in municipal wastewater samples. In comparison to the new MIP-MEPS procedure, the target compounds were also determined by solid-phase extraction (MISPE) using the new molecular imprinted polymer material to validate the new MIP-MEPS method. The ability of the MIP for molecular recognition of CIP, NOR and OFLO was proved in presence of structurally different environmental relevant substances such as quinolones (Qs), flumequine (FLU), di(methyl)phthalate (DMP), technical 4-nonylphenol (NP), caffeine, Galaxolide^®, Tonalid^®, di(butyl)phthalate (DBP), Triclosan, bisphenol-A (BPA), carbamazepine, di(ethylhexyl)phthalate (DEHP), estradiol and octocrylene. The analysis of wastewater samples revealed the high selectivity of the synthesized polymer which was able to recognize and retain the target analytes by both extraction methods, the offline SPE with MIP material and the semi-automated MEPS packed with MIP material.     

Two-step voltage dual electromembrane extraction: A new approach to simultaneous extraction of acidic and basic drugs

In the present work, acidic and basic drugs were simultaneously extracted by a novel method of high efficiency herein referred to as two-step voltage dual electromembrane extraction (TSV-DEME). Optimizing effective parameters such as composition of organic liquid membrane, pH values of donor and acceptor solutions, voltage and duration of each step, the method had its figures of merit investigated in pure water, human plasma, wastewater, and breast milk samples. Simultaneous extraction of acidic and basic drugs was done by applying potentials of 150 V and 400 V for 6 min and 19 min as the first and second steps, respectively. The model compounds were extracted from 4 mL of sample solution (pH = 6) into 20 μL of each acceptor solution (32 mM NaOH for acidic drugs and 32 mM HCL for basic drugs). 1-Octanol was immobilized within the pores of a porous hollow fiber of polypropylene, as the supported liquid membrane (SLM) for acidic drugs, and 2-ethyle hexanol, as the SLM for basic drugs. The proposed TSV-DEME technique provided good linearity with the resulting correlation coefficients ranging from 0.993 to 0.998 over a concentration range of 1–1000 ng mL⁻¹. The limit of detections of the drugs were found to range within 0.3–1.5 ng mL⁻¹, while the corresponding repeatability ranged from 7.7 to 15.5% (n = 4). The proposed method was further compared to simple dual electromembrane extraction (DEME), indicating significantly higher recoveries for TSV-DEME procedure (38.1–68%), as compared to those of simple DEME procedure (17.7–46%). Finally, the optimized TSV-DEME was applied to extract and quantify model compounds in breast milk, wastewater, and plasma samples.