Surface plasmon resonance immunosensor for bacteria detection

This work describes an approach for the development of two bacteria biosensors based on surface plasmon resonance (SPR) technique. The first biosensor was based on functionalized gold substrate and the second one on immobilized gold nanoparticles. For the first biosensor, the gold substrate was functionalized with acid-thiol using the self-assembled monolayer technique, while the second one was functionalized with gold nanoparticles immobilized on modified gold substrate. A polyclonal anti-Escherichia coli antibody was immobilized for specific (E. coli) and non-specific (Lactobacillus) bacteria detection. Detection limit with a good reproducibility of 10⁴ and 10³ cfu mL⁻¹ of E. coli bacteria has been obtained for the first biosensor and for the second one respectively. A refractive index variation below 5 × 10⁻³ due to bacteria adsorption is able to be detected. The refractive index of the multilayer structure and of the E. coli bacteria layer was estimated with a modeling software.     

Lectin sensitized anisotropic silver nanoparticles for detection of some bacteria

A method of bacteria detection by sensitized anisotropic silver nanoparticles is presented. Anisotropic silver nanoparticles with two bands of surface plasmon resonance (SPR) are prepared and sensitized with potato lectin. These nanoparticles are able to detect three bacterial species: Escherichia coli, Bacillus subtilis and Staphylococcus aureus. The interaction of these bacteria with such nanoparticles induces drastic changes in optical spectra of nanoparticles that are correlated with bacteria titer. The maximal sensitivity is observed for S. aureus (up to 1.5 × 10⁴ mL⁻¹).     

Optimization and evaluation of anticancer,antifungal, catalytic,and antibacterial activities: Biosynthesis of spherical-shaped gold nanoparticles using Pistacia vera hull extract (AuNPs@PV)

In the past years, use of plant sources for the biosynthesis of nanoparticles has become very important. Gold nanoparticles with unique biological properties are one of these materials which are being investigated extensively. In the present study, the aqueous extract of Pistacia vera hull was utilized to fabrication of gold nanoparticles (AuNPs@PV) in a facile, environmentally friendly, and affordable way. Then the anticancer, antifungal, antibacterial, and photocatalytic potentials of AuNPs@PV were also investigated. The results of various techniques applied, including XRD, UV–vis, TEM, FT-IR, EDS, and FESEM showed the biological reduction of Au³⁺ ions to Au⁰. Antibacterial studies were performed on a wide range of bacteria including seven strains of ATCC and seven strains of drug-resistant pathogens. According to the findings of this research, it seems that biosynthesized gold nanoparticles had good antibacterial activity against ATCC and drug-resistant strains of bacteria. The MIC values of E. coli, S. aureus, P. mirabilis, P. aeruginosa, E. faecalis, K. pneumonia, A. baumannii were 34.37, 4.2, 8.59, 4.29, 0.5, 34.37, and 8.59 μg/mL, respectively. The result of the antifungal investigation showed that two pathogenic fungi, Candida albicans (IFRC1873) and Candida albicans (IFRC1874) were susceptible to AuNPs@PV with MIC values of 550 and 137 μg/mL, respectively. Furthermore, AuNPs@PV revealed noteworthy anticancer efficacy against AGS-3 and MCF-7 cell lines with IC₅₀ values of 58.31 and 148.1 μg/mL, respectively. The results of the cytotoxicity effect of AuNPs@PV on BEAS-2B as a normal cell line indicated the selectivity of AuNPs@PV on cancerous cells. Furthermore, the fabricated AuNPs@PV under UV irradiation exhibited significant potential in the decolorization of methylene orange (MO) with a percent decolorization of 91.5 % after 20 min. Therefore, it can be concluded that biosynthesized gold nanoparticles as a photocatalyst, anti-bacterial, antifungal, and anti-cancer agents have potential applications in the fields of environment and biology.     

Expression of Codon-Optmized Phosphoenolpyruvate Carboxylase Gene from Glaciecola sp. HTCC2999 in Escherichia coli and its Application for C4 Chemical Production

We examined the expression of the phosphoenolpyruvate carboxylase (PEPC) gene from marine bacteria in Escherichia coli using codon optimization. The codon-optimized PEPC gene was expressed in the E. coli K-12 strain W3110. SDS-PAGE analysis revealed that the codon-optimized PEPC gene was only expressed in E. coli, and measurement of enzyme activity indicated the highest PEPC activity in the E. coli SGJS112 strain that contained the codon-optimized PEPC gene. In fermentation assays, the E. coli SGJS112 produced the highest yield of oxaloacetate using glucose as the source and produced a 20-times increase in the yield of malate compared to the control. We concluded that the codon optimization enabled E. coli to express the PEPC gene derived from the Glaciecola sp. HTCC2999. Also, the expressed protein exhibited an enzymatic activity similar to that of E. coli PEPC and increased the yield of oxaloacetate and malate in an E. coli system.     

Glucose biosensor based on gold nanoparticle-catalyzed luminol electrochemiluminescence on a three-dimensional sol–gel network

An electrochemiluminescent glucose biosensor was proposed based on gold nanoparticle-catalyzed luminol electrochemiluminescence (ECL). Gold nanoparticles were self-assembled onto silica sol–gel network, and then glucose oxidase was adsorbed on the surface of gold nanoparticles. The surface assembly process and the electrochemistry and ECL behaviors of the biosensor were investigated. The assembled gold nanoparticles could efficiently electrocatalyze luminol ECL. ECL intensity of the biosensor depended on scan rate, luminol concentration, and size of gold nanoparticles. The response of the ECL biosensor was linear over the range 1 μM to 5 mM with a detection limit of 0.2 μM glucose and showed satisfying reproducibility, stability and selectivity.     

Biosynthesis of silver nanoparticle using flowers of Calotropis gigantea (L.) W.T. Aiton and activity against pathogenic bacteria

Silver nanoparticles (AgNPs) from silver nitrate solution are carried out using the flower extract of Calotropis gigantea. Silver nanoparticles were characterized by UV–vis spectrophotometer, X-Ray diffractometer (XRD). Reduction of silver ions in the aqueous solution of silver during the reaction was observed by UV–vis spectroscopy. Crystalline nature of synthesized silver nanoparticles was studied by XRD pattern, refraction peak using the Scherrer’s equation. Antibacterial activity of the silver nanoparticles was performed by disc diffusion method against Bacillus subtilis, Pseudomonas putida and Escherichia coli. The antibacterial activity of synthesized silver nanoparticles by flower extract of C. gigantea was found against B. subtilis (10 mm). Synthesised AgNPs has the efficient antibacterial activity against Gram positive bacteria.     

Direct Conversion of Sugars and Organic Acids to Biobutanol by Non-growing Cells of Clostridium spp. Incubated in a Nitrogen-Free Medium

Several Clostridium spp. were incubated in a nitrogen-free medium (non-growth medium) containing only butyric acid as a sole precursor for performing butanol production by non-growing cells. Non-growing cells of Clostridium spp., especially Clostridium beijerinckii TISTR 1461, could convert butyric acid to butanol via their sole solventogenic activity. This activity was further enhanced in the presence of glucose as a co-substrate. In addition to glucose, other monosaccharides (i.e., galactose and xylose) and disaccharides (i.e., maltose, sucrose, and lactose) could also be used as a co-substrate with butyric acid. Among the organic acids tested (i.e., formic, acetic, propionic, and butyric acids), only butyric and acetic acids were converted to butanol. This study has shown that it is possible to use the non-growing cells of Clostridium spp. for direct conversion of sugars and organic acids to biobutanol. With this strategy, C. beijerinckii TISTR 1461 produced 12 g/L butanol from 15 g/L glucose and 10 g/L butyric acid with a high butanol yield of 0.68 C-mol/C-mol and a high butanol ratio of 88 %.     

Morphological and electrical characteristics of amino acid–AuNP nanostructured two-dimensional ensembles

The interaction between amino acids (l-cysteine, l-lysine) and gold nanoparticle layers deposited on ITO glasses was investigated. The citrate capped gold nanoparticles (AuNP) were first deposited as a thin layer onto silanized ITO and subsequently linked with an amino acid, due to strong affinity of thiol and amine groups to gold. The gold nanoparticles had an elliptical shape, with size varying between 7 and 14 nm, as indicated by TEM analysis. After deposition on ITO substrate, the nanoparticles self-assembled into large aggregates with poor contact between, as revealed by AFM. After linking l-cysteine or l-lysine to the surface of nanoparticles layer, a change in morphology occured. A better contact between the gold aggregates boundary developed, which improved the conducting properties of the nanostructured layer. The electrical resistance of the AuNPs layer, obtained from I–V measurements, was very high (2.8 × 10¹³ Ω) and slightly decreased after linking the NPs with amino acids.     

A combination of dispersive liquid–liquid microextraction and surface plasmon resonance sensing of gold nanoparticles for the determination of ziram pesticide

We have developed a reliable, fast, and highly sensitive analytical method utilizing dispersive liquid–liquid microextraction and gold nanoparticles probes for ziram (zinc bis(dimethyldithiocarbamate)) determination. The method is based on the in situ formation of gold nanoparticles in carbon tetrachloride as an organic phase. It was found that the trace levels of ziram influenced the formation of gold nanoparticles, leading to absorbance change of a sedimented phase. The results of the colorimetric ziram determination were in the concentration range of 0.12–2.52 ng/mL with a limit of detection of 0.06 ng/mL. The formation of the stable and dispersed gold nanoparticles in the organic phase provides a good precision for dispersive liquid–liquid microextraction method, resulting in the relative standard deviation of 3.8 and 1.2% for 0.56 and 1.58 ng/mL of ziram, respectively. This method has been successfully used for the ziram determination in samples of well and river water, soil, potato, carrot, wheat, and paddy soil.     

Bionanocomposite of Au decorated MnO2 via in situ green synthesis route and antimicrobial activity evaluation

Green synthesis gaining a significant importance for the preparation of nanoparticles (NPs) and NPs-based biocomposites gained much attention in biological applications. In the current study, gold (Au) nanoparticles were prepared via green approach using cinnamon extract. The Au nanocomposite (NC) was prepared with MnO₂ nanofiber mesh structure. The NC was characterized by XRD, SEM, FT-IR, EDX, UV–visible and DLS techniques. The MnO₂ nanofibers diameter was in 10–25 nm range, which was arranged in a mesh form and Au NPs was combined with nanofibers randomly. The MnO₂-Au NC antimicrobial activity was measured against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus strains. The antimicrobial activity of MnO₂-Au NC was highly promising against tested microorganisms in comparison to control (ciprofloxacin, a standard drug). The antimicrobial activity of MnO₂-Au NC was found in following order; > S. aureus > E. coli > P. aeruginosa with the zones inhibition of 22, 18 and 15 (mn), respectively. The MIC (minimum inhibitory concentration) values were 316, 342 and 231 (µg/mL) for E. coli, P. aeruginosa and S. aureus, respectively. In view of promising antimicrobial activity, the MnO₂-Au NC prepared via green approach could have potential applications in medical field and future study can be engrossed on the biocompatibility evaluation of MnO₂-Au NC using bioassays.     

Combining biofunctional magnetic nanoparticles and ATP bioluminescence for rapid detection of Escherichia coli

A rapid, specific and sensitive method for assay of Escherichia coli (E. coli) using biofunctional magnetic nanoparticles (BMNPs) in combination with adenosine triphosphate (ATP) bioluminescence was proposed. The BMNPs were fabricated by immobilizing a specific anti-E. coli antibody on the surface of amine-functionalized magnetic nanoparticles (about 20 nm in diameter), and then was applied to capture the target bacteria E. coli from samples. The BMNPs exhibited high capture efficiency to E. coli. Transmission electron microscope (TEM) images showed that the BMNPs were bound to the surface of entire E. coli cells. The target bacteria became magnetic so that could be isolated easily from the sample solution by employing an external magnetic field. The concentration of E. coli captured by the BMNPs was then detected by an ATP bioluminescence method. The optimization of ATP measurement was carried out to improve the detection sensitivity. The proposed method was applied to detect the E. coli inoculated into pasteurized milk with low detection limit (20 cfu/mL) and short detection time (about 1 h).     

Characterization of a Heavy Metal Translocating P-Type ATPase Gene from an Environmental Heavy Metal Resistance Enterobacter sp. Isolate

Heavy metals are common contaminants found in polluted areas. We have identified a heavy metal translocating P-type ATPase gene (hmtp) via fosmid library and in vitro transposon mutagenesis from an Enterobacter sp. isolate. This gene is believed to participate in the bacterium’s heavy metal resistance traits. The complete gene was identified, cloned, and expressed in a suitable Escherichia coli host cell. E. coli W3110, RW3110 (zntA::Km), GG48 (ΔzitB::Cm zntA::Km), and GG51 (ΔzitB::Cm) were used to study the possible effects of this gene for heavy metal (cadmium and zinc in particular) resistance. Among the E. coli strains tested, RW3110 and GG48 showed more sensitivity to cadmium and zinc compared to the wild-type E. coli W3110 and strain GG51. Therefore, strains RW3110 and GG48 were chosen for the reference hosts for further evaluation of the gene’s effect. The results showed that expression of this heavy metal translocating P-type ATPase gene could increase the ability for zinc and cadmium resistance in the tested microorganisms.     

Biosynthesis,characterization, biological and photo catalytic investigations of Elsholtzia blanda and chitosan mediated copper oxide nanoparticles

Bio synthesis of nanoparticles using plant parts has gained considerable attention, given the fact that the method is green, environment friendly, cheaper, simple and involves no hazardous substances. The present study involves the green synthesis of copper oxide nanoparticles (CuO NPs) using chitosan and the aqueous leaf extract of Elsholtzia blanda, an aromatic medicinal herb. The synthesized E.blanda-chitosan mediated copper oxide nanoparticles (CPCE) and E. blanda mediated copper oxide nanoparticles (PCE) were subjected to different characterization techniques, Ultraviolet–visible (UV–Vis), Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Energy Dispersive X-ray Analysis (EDAX), High Resolution Transmission Electron Microscopy (HRTEM) and Selected Area Electron Diffraction (SAED). The absorbance peaks in UV–Vis spectroscopy at 286 nm and 278 nm for CPCE and PCE respectively indicated the formation of nanoparticles. TEM and SEM employed for studying the surface morphology showed rod-like and spherical morphology bearing average size of 47.71 nm for CPCE and 36.07 nm for PCE. The antibacterial activities of the prepared nanoparticles were tested against Enterococcus faecalis, Staphylococcus aureus, Escherichia coli and Salmonella typhi by agar well diffusion method. The results indicate that CuO NPs possess effective antibacterial potential against all tested bacteria with a maximum zone of inhibition of 18 mm for Enterococcus faecalis. Antioxidant studies revealed the highest DPPH scavenging activity of 89% at 25 μg/mL concentration of the nanoparticles. The percentage of the photo catalytic degradation of Congo red was found to be 95% after 10 h.     

Synthesis,characterization and antibacterial properties of a novel nanocomposite based on polyaniline/polyvinyl alcohol/Ag

In this study, a novel nanocomposite based on polyaniline/polyvinyl alcohol/Ag (PANI/PVA/Ag) has been successfully synthesized. The chemical reduction method was used to produce Ag nanoparticle colloidal solution from Ag⁺ ions. The polymerization of aniline occurred in situ for the preparation of polyaniline (PANI) in the presence of ammonium persulfate. With exposure to Ag nanoparticles on the PANI/PVA composite, a new nanocomposite was obtained. The morphology and particle size of the novel nanocomposite was studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) analyses. According to XRD analysis, the size of nanoparticles was found to be in the range of 10–17 nm. SEM images showed the favored shape of nanoparticles as triangle which is a benign shape for antibacterial analysis. The antibacterial activity of the obtained nanocomposite was also evaluated against Gram positive bacteria Staphylococcus aureus (Staph. aureus) and Gram negative Escherichia coli (E. coli) using the paper disk diffusion method. The antibacterial study showed that the PANI/PVA composite did not have a very good antibacterial activity but PANI/PVA/Ag nanocomposites were found to be effective against two bacteria.     

Antibacterial study of Eucalyptus grandis fabricated zinc oxide and magnesium doped zinc oxide nanoparticles and its characterization

Mg-doped zinc oxide and zinc oxide nanoparticles were prepared by using methanolic seed extract from the Eucalyptus grandis plant via a green approach. Phytoconstituents present in seed extract act as capping and stabilizing agents for the biosynthesis of nanoparticles. Doping of Mg to zinc oxide nanoparticles increases the bandgap energy, thus enhancing its chemical, physical and optical properties. Further, it was characterized by various techniques such as scanning electron microscopy giving morphological information about the wurtzite hexagonal structure of bio-synthesized nanoparticles. X-ray diffraction technique tells about the crystalline nature of particles and the average crystallite size for zinc oxide and doped zinc oxide nanoparticles. Mg as a dopant enhances the properties of nanoparticles, thus making it more efficiently applicable as an antibacterial agent against Escherichia coli, gram-negative bacteria.     

A highly sensitive detection platform based on surface-enhanced Raman scattering for Escherichia coli enumeration

A very sensitive and highly specific heterogeneous immunoassay system, based on surface-enhanced Raman scattering (SERS) and gold nanoparticles, was developed for the detection of bacteria and other pathogens. Two different types of gold nanoparticles (citrate-stabilized gold nanosphere and hexadecyltrimethylammonium bromide (CTAB)-stabilized gold nanorod particles) were examined and this immunoassay was applied for the detection of Escherichia coli. Raman labels were constructed by using these spherical and rod-shaped gold nanoparticles which were first coated with 5,5′-dithiobis(2-nitrobenzoic acid) (DTNB) and subsequently with a molecular recognizer. The working curve was obtained by plotting the intensity of the SERS signal of the symmetric NO₂ stretching of DTNB at 1,333 cm⁻¹ versus the concentration of the E. coli. The analytical performance of gold particles was evaluated via a sandwich immunoassay, and linear calibration graphs were obtained in the E. coli concentration range of 10¹–10⁵ cfu/mL with a 60-s accumulation time. The sensitivity of the Raman label fabricated with gold nanorods was more than three times higher than spherical gold nanoparticles. The selectivity of the developed sensor was examined with Enterobacter aerogenes and Enterobacter dissolvens, which did not produce any significant response. The usefulness of the developed immunoassay to detect E. coli in real water samples was also demonstrated.     

Gold nanoparticles as efficient antimicrobial agents for Escherichia coli and Salmonella typhi

Background

It is imperative to eliminate bacteria present in water in order to avoid problems in healthy. Escherichia coli and Salmonella typhi bacteria are two common pollutants and they are developing resistance to some of the most used bactericide. Therefore new biocide materials are being tested. Thus, gold nanoparticles are proposed to inhibit the growth of these two microorganisms.

Results

Gold nanoparticles were supported onto clinoptilolite, mordenite and faujasite zeolites. Content of gold in materials varied between 2.3 and 2.8 wt%. The size, dispersion and roughness of gold nanoparticles were highly dependent of the zeolite support. The faujasite support was the support where the 5 nm nanoparticles were highly dispersed. The efficiency of gold-zeolites as bactericides of Escherichia coli and Salmonella typhi was determined by the zeolite support.

Conclusions

Gold nanoparticles dispersed on zeolites eliminate Escherichia coli and Salmonella typhi at short times. The biocidal properties of gold nanoparticles are influenced by the type of support which, indeed, drives key parameters as the size and roughness of nanoparticles. The more actives materials were pointed out Au-faujasite. These materials contained particles sized 5 nm at surface and eliminate 90–95% of Escherichia coli and Salmonella typhi colonies.     

Physico-chemical characterization and anti-laryngeal cancer effects of the gold nanoparticles

Most recently, gold nanoparticles due to anticancer properties have been considered in medical science. So the aim of the study was green synthesis of gold nanoparticles using Ocimum basilicum extract and its anticancer activity. The prepared Au nanoparticles were characterized by advanced physicochemical techniques like Fourier Transformed Infrared spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray spectroscopy (EDX), X-ray Diffraction (XRD) and UV–vis spectroscopy study. It has been established that Au nanoparticles have a spherical shape with a mean diameter from 19 to 44 nm. In the cellular and molecular part of the recent study, the treated cells with Au nanoparticles were assessed by MTT assay for 48 h about the cytotoxicity and anti-human laryngeal cancer properties on normal (HUVEC) and cancer (HEp-2, TU212, KB, UM-SCC-5, UM-SCC-11A and UM-SCC-11B) cell lines. In the antioxidant test, the IC50 of Au nanoparticles and BHT against DPPH free radicals were 228 and 208 µg/mL, respectively. The IC50 of Au nanoparticles were 174, 231, 179, 143, 230, and 216 µg/mL against HEp-2, TU212, KB, UM-SCC-5, UM-SCC-11A and UM-SCC-11B cell lines, respectively. The viability of malignant cell lines reduced dose-dependently in the presence of Au nanoparticles. It appears that the anti-cancer effect of Au nanoparticles e to their antioxidant effects.     

电化学沉积法制备金（核）-铜（壳）纳米粒子阵列

以组装在有机分子自组装膜/金基底电极上的Au纳米粒子阵列为电化学沉积模板,制备了金(核)-铜 (壳)纳米粒子阵列.选用巯基十一胺（AUDT）和巯基癸烷（DT）混合自组装膜作为基底电极与Au纳米粒子的耦联层,可以在一定的电位下实现金属Cu在Au纳米粒子上的选择性沉积.将沉积电位控制在－0.03 V（vs SCE）时,沉积初期（t ≤ 15 s,沉积粒子粒径 ≤ 20 nm ）金(核)-铜 (壳)粒子具有良好的单分散性和近似球形,而且粒径实验值同计算值非常吻合.     

Electrochemical attachment of motile bacterial cells to gold

Selective attachment of Escherichia coli K-12 bacterial cells to charged gold surfaces was demonstrated. Electrostatic binding of E. coli K-12 bacterial cells to positively charged surfaces was observed starting at +750 mV. The binding of E. coli K-12 cells to positively charged gold surfaces is proposed to occur due to long-range electrostatic interactions between the negatively charged O-chain of lipopolysaccharide (LPS) molecules protruding the bacterial cell body and the electrode surface. Removing LPS alters the cellular surface charge and results in cellular attachment to negatively charged surfaces. Thus, applying an electrical potential allows for the direct, real time detection of live, dead or damaged bacterial cells. The attachment of E. coli K-12 bacterial cells to surfaces with an applied potential substantiates the hypothesis that an electrostatic interaction is responsible for the binding of bacterial cells to positively charged molecular assemblies on surfaces used for building bacterial microarrays.