Assessment of copper(II) biosorption from aqueous solution by agricultural and industrial residues

In this study, newspaper scraps (NS) and maize spatha (MS) treated in turn by HNO₃ and MeOH were evaluated for the biosorption of Cu²⁺ ions, on the basis of batch experiments. The effects of several parameters were investigated, including contact time, solution pH, shaking speed, biosorbent dosage and ionic strength. Under optimal conditions, the maximum sorption capacities (Q_max) were (60.386 ± 0.006) and (44.90 ± 0.02) μmol Cu²⁺ per g of sorbent, respectively, for NS and MS chemically treated with HNO₃. The optimal parameters were pH: 5, contact time: 40 min and shaking speed: 100 rpm for NS, while for MS the same parameters were pH 5, 20 min and 150 rpm, respectively. It was found that Cu²⁺ biosorption is disfavored by an increase in ionic strength and by the presence of some interfering cations. The experimental data obtained with NS best matched the Langmuir’s sorption model (R² = 0.994) while the Temkin model best described biosorption on MS (R² = 0.987). The biosorption of Cu²⁺ on both materials followed pseudo-second order kinetics, and the desorption of Cu²⁺ ions was effective in 0.01 M HCl solution.     

Pharmacophore modeling, 3D-QSAR,docking, and molecular dynamics simulation on topoisomerase IV inhibitors of wild type Staphylococcus aureus

Staphylococcus aureus is a gram-positive bacterium. It is a foremost cause of skin and respiratory infections, endocarditis, osteomyelitis, Ritter’s disease, and bacteraemia. Topoisomerase enzyme is involved in preventing or correcting topological problems of overwinding or underwinding occurring in DNA before replication process. An exhaustive molecular modeling studies that includes pharmacophore modeling, ligand-based three-dimensional quantitative structure-activity relationship (3D-QSAR), molecular docking, molecular dynamics simulation, and ADME calculations were performed on isothiazoloquinolones derivatives which are reported as effective inhibitors against topoisomerase IV of wild type S. aureus. In pharmacophore modeling by using pharmacophore alignment and scoring engine (PHASE) a five-point model (AHHRR.3) was generated with existing compounds having statistical significant as correlation coefficient (R ² = 0.954), cross-validation coefficient (Q ² = 0.650), and F value of 130.5. Ligand-based 3D-QSAR study was applied using comparative molecular field analysis (CoMFA) with Q ² = 0.616, R ² = 0.989, and comparative molecular similarity indices analysis (CoMSIA) with Q ² = 0.510, R ² = 0.995. The predictive ability of this model was determined using a test set of molecules that gave acceptable predictive correlation (R ² Pred) values 0.55 and 0.56 for CoMFA and CoMSIA, respectively. Docking and molecular dynamic simulations were employed to position the inhibitors into protein active site to find out the most probable binding mode and most reliable conformations. Developed pharmacophore models and docking methods provide guidance to design enhanced activity molecules.

     

Theoretical investigation on homoleptic Yttrium tri-guanidinates

The electronic and molecular structures of the homoleptic Yttrium tris-guanidinates complexes Y[(NⁱPr)₂CNR₁R₂]₃, [R₁ = R₂ = Me, Et and iPr] have been investigated employing DFT calculations in order to understand the structures, bonding and energies of the interactions between Yttrium metal and guanidinate ligands. The effect of the substitution on nitrogen position of guanidinate in these complexes has been also investigated employing DFT and TDDFT calculations for six kinds of models obtained by alternative substitution of alkyl on nitrogen of the guanidinate ligands. The results reveal that the substitution position plays a crucial role in the geometric structure by affecting the torsion angle and the HOMO–LUMO transitions. The energy decomposition analysis indicates a majority of ionic bonding in all systems; the exception is in the M4 (Y[(N_YR)₂CN_CR₁R₂]₃; R = Et and R₁ = R₂ = H) which present a significant degree of covalency.     

Synthesis and crystal structure of the first chain-type nitridosilicates RE5Si3N9 (RE = La,Ce)

The novel branched chain-type nitridosilicates Ce₅Si₃N₉ and La₅Si₃N₉ have been synthesized in a radio-frequency furnace starting from the respective metals and silicon diimide Si(NH)₂ at 1625 °C for La₅Si₃N₉ and 1650 °C for Ce₅Si₃N₉, respectively. The structure of Ce₅Si₃N₉ has been determined by single-crystal X-ray diffraction (Ce₅Si₃N₉, Cmca (no. 64), a = 10.567(2) Å, b = 11.329(2) Å, c = 15.865(3) Å, V = 1899.3 Å³, Z = 8, R₁ = 0.0391, 1480 independent reflections, 90 refined parameters). The structure of isotypic La₅Si₃N₉ has been refined by the Rietveld method, starting from single-crystal data of Ce₅Si₃N₉ (La₅Si₃N₉, Cmca (no. 64), a = 10.647(4) Å, b = 11.414(4) Å, c = 16.030(5) Å, V = 1948.1 Å³, Z = 8, R_P = 0.0348, R_F² = 0.0533). Both compounds are built up of alternating Q²- and Q³-type corner sharing SiN₄ tetrahedra with additional corner sharing Q¹-units attached to the Q³-tetrahedra pointing alternately in opposing directions. These zipper-like chains are intertwined in both directions perpendicular to the chain itself to form a three-dimensionally interlocked structure with the rare-earth ions situated between the chains. Magnetic measurements resulted in a ferromagnetic ground state with a magnetic moment in agreement with Ce³⁺.