Determination of fatty alcohol ethoxylates and alkylether sulfates by anionic exchange separation, derivatization with a cyclic anhydride and liquid chromatography

A method for the separation, characterization and determination of fatty alcohol ethoxylates (FAE) and alkylether sulfates (AES) in industrial and environmental samples is described. Separation of the two surfactant classes was achieved in a 50:50 methanol-water medium by retaining AES on a strong anionic exchanger (SAX) whereas most FAE were eluted. After washing the SAX cartridges to remove cations, the residual hydrophobic FAE were eluted by increasing methanol to 80%. Finally, AES were eluted using 80:20 and 95:5 methanol-concentrated aqueous HCl mixtures. Methanol and water were removed from the FAE and AES fractions, and the residues were dissolved in 1,4-dioxane. In this medium, esterification of FAE and transesterification of AES with a cyclic anhydride was performed. Phthalic and diphenic anhydrides were used to derivatizate the surfactants in industrial samples and seawater extracts, respectively. Separation of the derivatized oligomers was achieved by gradient elution on a C8 column with acetonitrile/water in the presence of 0.1% acetic acid. Good resolution between both the hydrocarbon series and the successive oligomers within the series was achieved. Cross-contamination of FAE with AES and vice versa was not observed. Using dodecyl alcohol as calibration standard, and correction of the peak areas of the derivatized oligomers by their respective UV-vis response factors, both FAE and AES were evaluated. After solid-phase extraction on C18, the proposed method was successfully applied to the characterization and determination of the two surfactant classes in industrial samples and in seawater.     

Characterization and quantitation of mixtures of alkyl ether sulfates and carboxylic acids by capillary electrophoresis with indirect photometric detection

The separation, characterization, and determination of mixtures of alkyl ether sulfates (AES) and fatty acids (C10-C16) in background electrolytes (BGEs) containing acetonitrile (ACN)-water mixtures is addressed. Due to inhibition of the ionization of the carboxylate groups, the migration time and the resolution between the fatty acids decreased when the water content of the BGE was reduced, but efficiency and resolution between the AES oligomers improved. The migration times increased and resolution improved by substituting 5% ACN by an equivalent amount of dioxane. A complete separation of the two surfactant classes, up to the AES oligomers with 8 ethylene oxide units (EOs) with respect to C10, with excellent resolution between the AES oligomers, while preserving a satisfactory resolution between the fatty acids, was achieved with a BGE containing 5 mM trimethoxybenzoic acid, 7 mM dipentylamine, 85% ACN, 5% dioxane, and 10% water. The two surfactant classes were increasingly resolved by further reducing the water content of the BGE. Thus, C2 (acetate) was resolved from the AES oligomers up to 7 EOs using 90% ACN and 5% dioxane, but the resolution between the heavier fatty acids was poor with this BGE. Identification of the AES oligomers was eased by the excellent regularity of the successive migration times; thus, within each AES subclass or series of oligomers with the same number of carbon atoms in the alkyl chain, the migration times decreased following a mild curve as the number of EOs increased. The way how the data obtained by indirect photometry (corrected peak areas that are proportional to the molar concentrations) should be managed to avoid systematic error when the calibration curve is constructed using an AES standard with an oligomer distribution different from that of the samples is discussed and equations are given. Decyl sulfate was successfully used as internal standard. The detection limits (S/N = 3) were of ca. 2 microM for individual AES oligomers.     

Rapid characterization of fatty alcohol ethoxylates by non-aqueous capillary electrophoresis

Fatty alcohol ethoxylates (FAE) (a mixture of nonionic surfactants) have been characterized using NACE with UV detection. Phenyl polyurethane derivatives of these compounds were previously obtained by reaction with phenyl isocyanate. The derivatization reaction only requires microwave irradiation for 30 s (600 W). Phenyl polyurethanes were separated and characterized using a BGE containing a mixture of ammonium nitrate (15 mM), acetic acid (1.5%) and 9:1 v/v methanol/ACN. After optimization of the instrumental conditions for the separation, phenyl polyurethane compounds (formed from the corresponding FAE) with ethylene oxide numbers (EON) of 6 (certified standard and industrial samples), 7 and 10 (both as industrial samples), and 5.5 (microemulsion phase) were successfully separated and characterized. The properties of these FAE nonionic surfactants are very important in the petroleum industry, which requires characterization of the quality of the purchased materials as well as the final products in the microemulsion-oil-water stream process. This analytical objective has been achieved by the proposed NACE methods, allowing FAE to be distinguished from 5.5 to 10 EON with errors below 4%, and shows advantages against to HPLC methods.     

Simultaneous extraction and determination of anionic surfactants in waters and sediments

A new method has been developed for the simultaneous determination of the most frequently used anionic surfactants - linear alkylbenzene sulfonates (LAS), alkyl ethoxysulfates (AES) and alkyl sulfates (AS) - in aqueous and sediment samples. Preconcentration and purification of water samples are carried out by means of solid-phase extraction (SPE). The efficiency of two different extraction methods for the analysis of sediments - Soxhlet extraction and pressurized liquid extraction (PLE) - has been compared. Identification and quantification of the target compounds is performed using a liquid chromatography - mass spectrometry (LC-MS) system equipped with an electrospray interface (ESI) in negative ion-mode. Homologue recoveries are 85-123% for SPE, 94-112% for Soxhlet extraction and 81-125% for PLE in the case of LAS, and 60-94% for SPE, 61-109% for Soxhlet extraction and 55-99% for PLE in the case of AES, whereas the limits of detection are 0.1-0.5 ngml(-1) in water and 1-5 ngg(-1) in sediment. This method has been applied to the determination of anionic surfactants in the Guadalete estuary (SW Spain), and LAS concentration levels from 538 to 1014 ngg(-1) in sediments and from 25.1 to 64.4 ngml(-1) in waters have been found. AES values from 168 to 536 ngg(-1) in sediments and from 4.5 to 11.9 ngml(-1) in waters are reported for the first time in European rivers.     

羧甲基淀粉与烷基二甲基苄基氯化铵的相互作用研究

通过电导法、荧光法、粒度法等方法研究了羧甲基淀粉与3种不同碳数烷基二甲基苄基氯化铵之间的相互作用。结果表明,羧甲基淀粉与长链烷基二甲基苄基氯化铵在小于单纯表面活性剂临界胶束浓度（cmc）1～2个数量级的浓度下发生复合,并产生沉淀。当表面活性剂烷基链增加且浓度增大时,表面活性剂长碳链间的疏水作用及与羧甲基淀粉间的疏水作用...     

Solution self-assembly of the sophorolipid biosurfactant and its mixture with anionic surfactant sodium dodecyl benzene sulfonate

The self-assembly in aqueous solution of the acidic (AS) and lactonic (LS) forms of the sophorolipid biosurfactant, their mixtures, and their mixtures with anionic surfactant sodium dodecyl benzene sulfonate, LAS, has been studied using predominantly small-angle neutron scattering, SANS, at relatively low surfactant concentrations of <30 mM. The more hydrophobic lactonic sophorolipid forms small unilamellar vesicles at low surfactant concentrations, in the concentration range of 0.2 to 3 mM, and transforms via a larger unilamellar vesicle structure at 7 mM to a disordered dilute phase of tubules at higher concentrations, 10 to 30 mM. In marked contrast, the acidic sophorolipid is predominantly in the form of small globular micelles in the concentration range of 0.5 to 30 mM, with a lower concentration of larger, more planar aggregates (lamellar or vesicular) in coexistence. In mixtures of AS and LS, over the same concentration range, the micellar structure associated with the AS sophorolipid dominates the mixed-phase behavior. In mixtures of anionic surfactant LAS with the AS sophorolipid, the globular micellar structure dominates over the entire composition and concentration range studied. In contrast, mixtures of LAS with the LS sophorolipid exhibit a rich evolution in phase behavior with solution composition and concentration. At low surfactant concentrations, the small unilamellar vesicle structure present for LS-rich solution compositions evolves into a globular micelle structure as the solution becomes richer in LAS. At higher surfactant concentrations, the disordered lamellar structure present for LS-rich compositions transforms to small vesicle/lamellar coexistence, to lamellar/micellar coexistence, to micellar/lamellar coexistence, and ultimately to a pure micellar phase as the solution becomes richer in LAS. The AS sophorolipid surfactant exhibits self-assembly properties similar to those of most other weakly ionic or nonionic surfactants that have relatively large headgroups. However, the more hydrophobic nature of the lactonic sophorolipid results in a more complex and unusual evolution in phase behavior with concentration and with concentration and composition when mixed with anionic surfactant LAS.     

Comparison between evaporative light scattering detection and charged aerosol detection for the analysis of saikosaponins

Saikosaponins are triterpene saponins derived from the roots of Bupleurum falcatum L. (Umbelliferae), which has been traditionally used to treat fever, inflammation, liver diseases, and nephritis. It is difficult to analyze saikosaponins using HPLC-UV due to the lack of chromophores. Therefore, evaporative light scattering detection (ELSD) is used as a valuable alternative to UV detection. More recently, a charged aerosol detection (CAD) method has been developed to improve the sensitivity and reproducibility of ELSD. In this study, we compared CAD and ELSD methods in the simultaneous analysis of 10 saikosaponins, including saikosaponins-A, -B₁, -B₂, -B₃, -B₄, -C, -D, -G, -H and -I. A mixture of the 10 saikosaponins was injected into the Ascentis^® Express C18 column (100 mm × 4.6 mm, 2.7 μm) with gradient elution and detection with CAD and ELSD by splitting. We examined various factors that could affect the sensitivity of the detectors including various concentrations of additives, pH and flow rate of the mobile phase, purity of nitrogen gas and the CAD range. The sensitivity was determined based on the signal-to-noise ratio. The best sensitivity for CAD was achieved with 0.1 mM ammonium acetate at pH 4.0 in the mobile phase with a flow rate of 1.0 mL/min, and the CAD range at 100 pA, whereas that for ELSD was achieved with 0.01% acetic acid in the mobile phase with a flow rate at 0.8 mL/min. The purity of the nitrogen gas had only minor effects on the sensitivities of both detectors. Finally, the sensitivity for CAD was two to six times better than that of ELSD. Taken together, these results suggest that CAD provides a more sensitive analysis of the 10 saikosaponins than does ELSD.     

Sol–gel encapsulation of cresol red in presence of surfactants

Cresol Red (CR) pH indicator was encapsulated into silica network using the sol–gel process. Transparent monolithic disks of entrapped CR were obtained in the presence of cetyl trimethyl ammonium bromide (CTAB) or dodecyl dimethyl amino oxide (Genaminox LA,GLA) alkyl hydroxyethyl dimethyl ammonium chloride (HY, R = 12–14) and TX-100 surfactants. UV/VIS spectra showed that the encapsulated CR retains its structure in terms of its response to pH. At the neutral conditions it is found that the HY surfactant is considered as proton donor as favor the cationic form of the indicator, while CTAB surfactant favor the neutral, however GLA surfactant, the anionic form of CR is more favored because GLA has a zwitterionic head. The surfactant GLA with TEOS has shifted the equilibrium to the ionized form of CR due to the electrostatic interaction between the surfactant and the CR anion. Therefore their pH range is dependent on the nature of a surfactant used. It is found that the HY surfactant is more efficient as far as loading of CR is concern and it widened the working pH range.     

Synthesis of ZnO nanoparticles and its application in photocatalytic degradation of LABS by the trial-and-error and Taguchi methods

In the work ZnO nanoparticles were prepared by sol-gel method. The catalyst was characterized by X-ray powder diffractometer (XRD), scanning electron microscopy (SEM). The photocatalytic oxidation of anionic surfactant in detergent industries was studied using ZnO nanoparticles with diameter size 20 nm as catalyst on irradiation with UV light. Analysis of kinetic showed that the amount of surfactant photocatalytic degradation can be fitted with pseudo-first-order model and studied photochemical elimination of Linear alkyl benzene sulfonates by the trial-and-error and Taguchi methods. Our experimental design consisted of testing five factors, i.e. dosage of K₂S₂O₈, concentration of surfactant, amount of ZnO, irradiation time, and initial pH. The results showed that photocatalytic degradation of linear alkyl benzene sulfonates was strongly influenced by these parameters.     

Determination,aerobic biodegradation and environmental occurrence of aliphatic alcohol polyethoxylate sulfates (AES)

A new analytical method was developed for the routine specific determination of the anionic surfactant Alcohol polyEthoxylate Sulfate (AES) in environmental aqueous samples. An enrichment/fractionation of the target analytes in water samples was performed by solid-phase extraction (SPE) on graphitized carbon black (GCB) (recoveries: 90–103%), followed by hydrolysis/derivatization with fluorescent reagents and separation/detection by reversed-phase high performance liquid chromatography coupled with fluorescence (HPLC-FLD). The developed procedure was applied to the study of the aerobic biodegradation of AES under laboratory conditions and to a ten-month monitoring of AES, as well as of linear alkylbenzene sulfonates (LAS), nonylphenol polyethoxylates (NPE) and alcohol polyethoxylates (AE) surfactants, in the Po river (Northern Italy). The residual concentrations found in the river waters were compared and used for a preliminary estimation of the annual average loads of monitored surfactants in the Adriatic Sea.     

Hydrophobic terminal group of surfactant initiating micellization as revealed by 1H NMR spectroscopy

The critical aggregation concentration (CAC) of four with three kinds of conventional surfactants, namely, two cationic surfactants [hexadecyltrimethyl ammonium bromide (CTAB) and tetradecyltrimethyl ammonium bromide (TTAB)], one anionic surfactant [sodium dodecyl sulfate (SDS)], and a nonionic surfactant [Triton X-100 (TX-100)], were determined by variation of ¹H chemical shifts with surfactant concentrations. Results show that the CAC values of protons at different positions of the same molecule are different, and those of the terminal methyl protons are the lowest, respectively, which suggests that the terminal groups of the alkyl chains aggregates first during micellization. Measurement of the transverse relaxation time (T₂) of different protons in SDS also show that the terminal methyl protons start to decrease with the increase in concentration first, which supports the above mentioned tendency.     

Identification and quantitation of trace impurities in fatty alcohol ethoxylates using HPLC and MALDI-TOF mass spectrometry

A two-step HPLC separation that combines isocratic and gradient elution has been developed for the analysis of trace impurities in fatty alcohol ethoxylates (FAEs). Quantitative estimates of the early eluting impurities were obtained from a calibration curve based on the responses of an evaporative light scattering detector (ELSD). Isocratic conditions were used to elute the impurities and gradient conditions for the main FAE components. In this manner, an acceptable compromise was obtained between resolution and analysis time. Fractions were collected and the impurities identified using MALDI-TOF mass spectrometry.     

Separation and determination of homologues of linear alkylbenzenesulfonates by nonaqueous capillary zone electrophoresis using alkylammonium salts in ethanol

The separation of linear alkylbenzene sulfonates (LAS) by nonaqueous capillary electrophoresis (NACE) using negative polarity, and a buffer containing acetic acid and an alkylamine in nonaqueous ethanol, has been investigated. Several primary, secondary, and tertiary alkylamines with alkyl chains of different length were compared. The solutes travelled against the electroosmotic flow (EOF), and at the same time were braked by association with the alkylamine molecules or with the alkylammonium ions. The best resolution between adjacent LAS homologues (R approximately 2.1), partial isomer resolution in two peaks, and at the same time an excellent repeatability, was obtained with a small dipentylamine excess over the acetic acid. When the buffer concentration increased, resolution between the homologues increased slightly (R approximately 2.4), and a different isomer group was partially separated. A background electrolyte (BGE) containing 10 mM acetic acid and 20 mM dipentylamine to separate and quantify the homologues within 25 min is recommended. The isomer peak profile with up to three peaks can be estimated using this buffer and another one with 80 mM acetic acid and 90 mM dipentylamine. The former BGE was used to determine LAS in liquid and powder laundry detergents. The detection limit for the determination of total LAS in these products was 2.5 microg mL(-1), and the peak area and migration time interday repeatabilities were below 4.3 and 2.8%, respectively.     

Comparative study on the interaction of DNA with three different kinds of surfactants and the formation of multilayer films

The interactions between double-stranded DNA (dsDNA) and three different kinds of surfactants, i.e., cationic, anionic, and nonionic surfactants, were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and UV-vis spectroscopy. Multilayer films composed of DNA and surfactants were prepared at gold electrode by electrostatic or hydrophobic interactions. It was found that the cationic surfactant, CTAB, can bind to DNA by electrostatic interaction, and the electron transfer resistance of CTAB-DNA complex film increases first and then decreases with CTAB concentration. The anionic surfactant, LAS, can bind to DNA but by hydrophobic interaction, and the electron transfer resistance of the complex film keeps decreasing with LAS concentration. Nonionic surfactants can also directly bind to DNA by hydrophobic interaction. All the three different kinds of surfactants can form multilayer films with DNA on the electrode surface. The chemical structure of DNA keeps unchanged during interacting with these surfactants. The binding modes of DNA with these three different kinds of surfactants were also deduced.     

Application of a xenon arc lamp as a light source for evaporative light scattering detection

The standard tungsten-halogen light source used in a commercial evaporative light scattering detector (ELSD) was replaced with a 180 W xenon arc lamp. The xenon arc lamp possesses a broader spectrum in the UV region than the halogen source. The influence of the UV transmittance of five selected solvents was studied with a size-exclusion chromatography column. This solvent parameter was not observed to influence the ELSD response between the two light source settings. With the solvents studied, better sensitivity was obtained with the xenon arc lamp than the halogen lamp. This high-energy source was applied to ceramide III analysis with an octadecyl-grafted silica column and methanol:tetrahydrofuran 97:3 as the mobile phase, and the sensitivity of the quantification of ceramide III increased 16-fold for injected amounts of 14∼140 ng. The molecular species in a sample of naturally occurring ceramides was analyzed using two C18 columns at 40 °C and gradient elution from 100% acetonitrile to 100% isopropanol in 30 min. The increased ELSD sensitivity achieved when using the xenon arc lamp allowed both the minor and major ceramide species to be observed, in contrast to the results achieved when the halogen lamp was used, where the increased photomultiplier voltage needed to observed the signals from the minor species caused the signals from the major ceramide species to occur above the detector response window.     

Development of a HPLC Method for Analysis of Linear Alkylbenzene Sulphonates and Detection by UV and FTIR Spectroscopy Using Thermospray Interface

 A reversed-phase high performance liquid chromatography (RP-HPLC) method, with acetic acid and sodium perchlorate phase modifiers, was developed to separate a mixture of linear alkylbenzene sulphonates (LAS), containing 10 to 13 carbon atoms. The effects of methanol-water compositions and concentrations of used modifiers were investigated and compared. The separation achieved with 50 mg L⁻¹ acetic acid was found satisfactory whereas a concentration of 10 g L⁻¹ sodium perchlorate was preferred. Chromatograms obtained with UV and Fourier transform infrared (FTIR) detection showed almost similar features and HPLC-FTIR interface spectra of LAS components exhibited excellent agreement of absorption features to those of standard FTIR spectrum and no thermal degradation was found to occur. Received May 20, 1998 Revision March 25, 1999.     

Determination of Anionic Surfactants in Water

The use of ternary complexes in the determination of anionic surfactants has been investigated and an analytical method using linear alkyl sulfonates as a test substance has been developed. The method involves the formation of the chloroform-extractable bisphenanthroline Cu(II)-linear alkyl sulfonate (LAS) complex and the subsequent equilibration of the extract with erythrosine to form the extractable bisphenanthroline Cu(II)-erythrosine complex. In the equilibration step erythrosine displaces LAS quantitatively, allowing the determination of the LAS originally present by measuring the absorbance of the extracted bisphenanthroline-Cu(II)-erythrosine complex. Results are reported of studies made to determine the optimum analytical conditions, the sensitivity, and the precision for the method described.     

Major lipid classes separation of buttermilk,and cows,goats and ewes milk by high performance liquid chromatography with an evaporative light scattering detector focused on the phospholipid fraction

An improved HPLC–ELSD method has been developed for the analysis of the lipid classes of buttermilk and milk from different species, focused in the phospholipids fraction without a prior fractionation step and in a single run. The total lipid profile analysis showed the major and minor lipid compounds as cholesterol esters, triacylglycerides, cholesterol, diacylglycerides, free fatty acids, monoacylglycerides, and also the polar compounds as glucosylceramide, lactosylceramide, phosphatidyl-ethanolamine, phosphatidylinositol, phosphatidylserine, phosphatidylcholine, sphingomyelin and lysophosphatidylcholine. The identification and quantification of the different compounds, using calibration curves made with individual standards and the low coefficients of variation obtained in the inter- and intra-assays showed the suitability of the developed method. In this study, we optimized and validated a quantitative HPLC–ELSD method at a concentration level suitable for routine analysis of the major lipid classes in milk and dairy products.     

新型农药丙酯草醚对微乳液体系相行为的影响

表面活性剂;微乳液;“鱼形”相图;丙酯草醚