Oximation reaction induced reduced graphene oxide gas sensor for formaldehyde detection

High-performance gas sensors can offer great potentials for monitoring and detection of volatile organic compounds (VOCs) in both domestic and industrial environment. In the present work, a new HCHO gas sensor was constructed with reduced graphene oxide (RGO) induced by the oximation reaction. The gas-sensing performance test results suggested that the RGO hydroxylamine hydrochloride (RGO/HA-HCl) sensor presented a high response of 75% at 16 ppm HCHO at room temperature, and a high selectivity for HCHO suffering little interference with high concentrations of volatile organic compounds, including methanol, ethanol, and methylbenzene, dichloromethane and water. Additionally, the RGO/HA-HCl sensor also showed a good long-term stability with RSD of 5.83% for a 15-day continuous sensing test, and the detection limit (DL) could reach 0.023 ppm under ambient conditions. Moreover, the mechanism for the high sensitivity and selectivity of formaldehyde was further established by in-situ gas chromatography mass spectrometry (GC–MS). This work would provide a reliable new HCHO gas sensor which could be used for monitoring and forewarning the emission of HCHO for a better protection and improvement of our environment.     

Graphene oxide and reduced graphene oxide as novel stationary phases via electrostatic assembly for open‐tubular capillary electrochromatography

We present here the application of graphene oxide (GO) and reduced graphene oxide (GOOH) sheet as novel stationary phases for open‐tubular CEC (OTCEC) separation based on electrostatic assembly. The inner walls of a bare capillary column was first modified by ionic assembly of poly (diallyldimethylammonium chloride) (PDDA), and then negatively charged GO or GOOH was easily assembled on a positively charged interior walls of the capillary by electrostatic force. Scanning Electron Microscope images showed that GO and GOOH can still maintain sheet‐layer‐like structure when coated onto the capillary via electrostatic assembly. The chromatographic properties of the GO and GOOH coated columns were evaluated via OTCEC separations of various kinds of analytes, including three acid nitrophenol isomers, three basic nitroaniline isomers, and four neutral PAHs. Efficient separations of all the analytes were achieved with optimized buffer pH and organic additive. The reproducibility and stability of the GO or GOOH coated columns were investigated. Our results indicate the capability of application GO or GOOH sheet in OTCEC separation, which can be coated on the inner wall of fused‐silica capillary via electrostatic assembly.     

Defluoridation in aqueous solution by a composite of reduced graphene oxide decorated with cuprous oxide via sonochemical

The World Health Organization (WHO) has recommended the fluoride level in drinking water (1.5 mg/L) and defluoridation of water is an essential to remove of fluoride from contaminated water. Hence, the effective and rapid adsorbent Cuprous oxide-reduced graphene oxide (Cu₂O-RGO) composite was developed to overwhelm this concern. Sonochemical approach was adopted for the synthesis of desirable composite which was further characterized by XRD, FTIR, SEM, and EDS. The optimized composite (30 mg) shown the significant adsorption capacity of 34 mg/g of F⁻ solution (pH = 9), 70% removal of F⁻ solution from real experiment and Freundlich model was fitted than Langmuir and Temkin isotherms. The experimental results corroborate that adsorbent is the most effective for removal of fluoride from its polluted water.     

Magnetic polyethyleneimine functionalized reduced graphene oxide as a novel magnetic solid-phase extraction adsorbent for the determination of polar acidic herbicides in rice

A novel magnetic polyethyleneimine modified reduced graphene oxide (Fe₃O₄@PEI-RGO) had been fabricated based on a self-assemble approach between positive charged magnetic polyethyleneimine (Fe₃O₄@PEI) and negative charged GO sheets via electrostatic interaction followed by chemical reduction of GO to RGO. The as-prepared Fe₃O₄@PEI-RGO was characterized by transmission electron microscopy (TEM), Fourier transform infrared spectrometry (FT-IR), X-ray diffraction (XRD), thermal gravimetric analyzer (TGA), vibrating sample magnetometer (VSM) and zeta potential analysis, and then was successfully applied to determine four phenoxy acid herbicides and dicamba in rice coupled with high performance liquid chromatography (HPLC). As a surface modifier of RGO, PEI not only effectually affected the surface property of RGO (e.g. zeta potential), but also changed the polarity of RGO and offered anion exchange groups to polar acidic herbicides, which would directly influence the type of adsorbed analytes. Compared with Fe₃O₄@PEI, Fe₃O₄/RGO and Fe₃O₄@PEI-GO, the as-prepared Fe₃O₄@PEI-RGO, integrating the superiority of PEI and RGO, showed higher extraction efficiency for polar acidic herbicides. Besides, the adsorption mechanism was investigated as well. It turned out that electrostatic interaction and π-π interaction were considered to be two major driving force for the adsorption process. Response surface methodology (RSM), a multivariate experimental design technique, was used to optimize experimental parameters affecting the extraction efficiency in detail. Under the optimal conditions, a satisfactory performance was obtained. The calibration curves were linear over the concentration ranging from 2 to 300 ng g⁻¹ with correlation coefficients (r) between 0.9985 and 0.9994. The limits of detection (LODs) were in the range of 0.67–2 ng g⁻¹. The recoveries ranged from 87.41% to 102.52% with relative standard deviations (RSDs) less than 8.94%. Taken together, the proposed method was an efficient pretreatment and enrichment procedure and could be successfully applied for selective extraction and determination of polar acidic herbicides in complex matrices.     

Synthesis of iron oxide cubes/reduced graphene oxide composite and its enhanced lithium storage performance

Fe₃O₄ is considered as a promising electrode material for lithium-ion batteries(LIBs) due to its low cost and high theoretical capacity(928 mAh/g).Nevertheless,the huge volume expansion and poor conductivity seriously hamper its practical applications.In this study,we use a facile hydrothermal reaction together with a post heat treatment to construct the three-dimensional heterostructured composite(Fe₃O₄/rGO) inwhich reduced graphene oxide sheets wraped the Fe₃O₄ submicron cubes as the conductive network.The electric conduction and electrode kinetics of lithium ion insertion/extraction reaction of the composite is enhanced due to the assist of conductive rGO,and thus the Listorage performance is obviously improved.The composite exhibits a reversible charge capacity of772.1 mAh/g at the current density of 0.1 A/g,and the capacity retention reaches 70.3% after400 cycles at0.5 A/g,demonstrating obviously higher specific capacity and rate capability over the Fe₃O₄ submicron cubes without rGO,and much superior cycling stability to the parent Fe_2 O_3 submicron cubes without rGO.On the other hand,as a synergic conductive carbon support,the flexible rGO plays an important role in buffering the large volume change during the repeated discharge/charge cycling.     

The loading of polyoxometalates based compound on reduced graphene oxide,a composite material for electrical energy storage and tetracycline removal

A polyoxometalate based composite material (NiPW₁₂NP/FrGO) was synthesized successfully, in which the nanoparticle of a polyoxometalate compound (NiPW₁₂NP) distributes on carboxylate group functionalized reduced graphene oxide (FrGO) homogenously. There exist intensive chemical bonds between NiPW₁₂NP and FrGO, which guarantees the stability of this composite material. When employed as a cathode material, NiPW₁₂NP/FrGO exhibits high specific capacitance, remarkable rate capability and long-term stability. When the current density is 4 A g⁻¹, a specific capacitance as high as 437.6 F g⁻¹ is achieved by NiPW₁₂NP/FrGO. With NiPW₁₂NP/FrGO serving as cathode and MnO₂ acting as anode, a high performance asymmetric supercapacitor (ASC) is assembled, which possesses a high energy density of 12.96 W h·kg⁻¹ at 0.67 kW kg⁻¹. It also shows a good rate capability, when the current density increases from 4 to 12 A g⁻¹, its specific capacitances decreases from 115.2 to 90.9 F g⁻¹, with 78.9% capacitance retention. After 5000 cycles charge-discharge experiments, 94.3% of its capacitance can be maintained, which exhibits good stability. Furthermore, NiPW₁₂NP/FrGO composite material also shows excellent tetracycline adsorption ability with capacity 288.28 mg g⁻¹, the adsorption can be well described with Temkin model, which suggests electrostatic attraction dominates the adsorption process.     

Reduced graphene oxide as a recyclable catalyst for dehydrogenation of hydrazo compounds

Reduced graphene oxide served as a reusable and efficient carbocatalyst for aerobic oxidative dehydrogenation of hydrazo compounds. Azo compounds were obtained in high yields under mild reaction conditions.     

Novel Ag2S nanoparticles on reduced graphene oxide sheets as a super-efficient catalyst for the reduction of 4-nitrophenol

Here,Ag_2S nanoparticles on reduced graphene oxide(Ag_2S NPs/RGO) nanocomposites with relatively good distribution are synthesized for the first time by conversing Ag NPs/RGO to Ag_2S NPs/RGO via a facile hydrothermal sulfurization method.As an noval catalyst for the reduction of 4-nitrophenol(4-NP),it only takes 5 min for Ag_2S NPs/RGO to reduce 98% of 4-NP,and the rate constant of the composites is almost 13 times higher than that of Ag NPs/RGO composites.The high catalytic activity of Ag_2S NPs/RGO can be attributed to the following three reasons:(1) Like metal complex catalysts,the Ag_2S NPs is also rich with metal center Ag(δ~+),with pendant base S(δ) close to it,and thus the Ag and basic S function as the electron-acceptor and proton-acceptor centers,respectively,which facilitates the catalyst reaction;(2)RGO features the high adsorption ability toward 4-NP which provides a high concentration of 4-NP near the Ag_2S NPs;and(3) electron transfer from RGO to Ag_2S NPs,facilitating the uptake of electrons by 4-NP molecules.     

Preparation of cobalt-tetraphenylporphyrin/reduced graphene oxide nanocomposite and its application on hydrogen peroxide biosensor

A novel cobalt-tetraphenylporphyrin/reduced graphene oxide (CoTPP/RGO) nanocomposite was prepared by a π–π stacking interaction and characterized by ultraviolet–visible absorption spectroscopy (UV–vis), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS). The CoTPP/RGO nanocomposite exhibited high electrocatalytic activity both for oxidation and reduction of H₂O₂. The current response was linear to H₂O₂ concentration with the concentration range from 1.0 × 10⁻⁷ to 2.4 × 10⁻³ mol L⁻¹ (R = 0.998) at the reductive potential of −0.20 V and from 1.0 × 10⁻⁷ to 4.6 × 10⁻⁴ mol L⁻¹ (R = 0.996) at the oxidative potential of +0.50 V. The H₂O₂ biosensor showed good anti-interfering ability towards oxidative interferences at the oxidative potential of +0.50 V and good anti-interfering ability towards reductive interferences at the reductive potential of −0.20 V.     

One-step fabrication of hydrophilic lignosulfonate-decorated reduced graphene oxide to enhance the pervaporation performance of calcium alginate membranes

In this study, a reduced graphene oxide (rGO)@sodium lignosulfonate (NaLS) composite material was fabtricated using a one-step method and then mixed with natural polysaccharide calcium alginate (CaAlg) to prepare the rGO@NaLS/CaAlg pervaporation membrane. The appearance and physical properties of the rGO@NaLS/CaAlg membrane were characterized by scanning electron microscopy and water contact angle. The swelling performance of the membrane and its dehydration performance to organic solvents were evaluated. The results indicate that the addition of rGO@NaLS can increase the hydrophilicity of the rGO@NaLS/CaAlg membrane and reduce its degree of swelling in the ethanol solution. The membrane incorporated with 6 wt% rGO@NaLS exhibits the best pervaporation performance, and ethanol can be purified to 99.8%.     

硼掺杂还原态氧化石墨烯催化剂的制备及其蒽催化加氢性能的研究

制备了一系列硼掺杂的还原氧化态石墨烯催化剂并应用于蒽加氢反应。结果表明，随着催化剂处理温度的升高，催化剂中有序碳结构会发生变化，硼会取代材料骨架中的碳，进而影响蒽和氢气的吸附活化。经硼改性后，催化剂对蒽加氢反应表现出了很高的加氢活性，蒽的最高转化率可达97%，深度加氢产物八氢蒽的最高选择性可达19%。     

Recent progress in applications of graphene oxide for gas sensing: A review

This paper is a review of the recent progress on gas sensors using graphene oxide (GO). GO is not a new material but its unique features have recently been of interest for gas sensing applications, and not just as an intermediate for reduced graphene oxide (RGO). Graphene and RGO have been well known gas-sensing materials, but GO is also an attractive sensing material that has been well studied these last few years. The functional groups on GO nanosheets play important roles in adsorbing gas molecules, and the electric or optical properties of GO materials change with exposure to certain gases. Addition of metal nanoparticles and metal oxide nanocomposites is an effective way to make GO materials selective and sensitive to analyte gases. In this paper, several applications of GO based sensors are summarized for detection of water vapor, NO₂, H₂, NH₃, H₂S, and organic vapors. Also binding energies of gas molecules onto graphene and the oxygenous functional groups are summarized, and problems and possible solutions are discussed for the GO-based gas sensors.     

氧化石墨烯和石墨烯在催化领域中的应用研究进展

石墨烯具有独特的二维平面结构,其导电性能好,比表面积大,耐酸碱,耐高温.基于石墨烯的优异特性,本文作者从材料的合成和结构等方面对石墨烯基催化剂的研制及其催化性能进行了评述.介绍了石墨烯催化体系的类型和机理,对石墨烯催化中存在的问题进行了简单分析,并对石墨烯在催化领域的应用前景进行了展望.     

Ferrocene-functionalized graphene electrode for biosensing applications

A novel ferrocene-functionalized reduced graphene oxide (rGO)-based electrode is proposed. It was fabricated by the drop casting of ferrocene-functionalized graphene onto polyester substrate as the working electrode integrated within screen-printed reference and counter electrodes. The ferrocene-functionalized rGO has been fully characterized using FTIR, XPS, contact angle measurements, SEM and TEM microscopy, and cyclic voltammetry. The XPS and EDX analysis showed the presence of Fe element related to the introduced ferrocene groups, which is confirmed by a clear CV signal at ca. 0.25 V vs. Ag/AgCl (0.1 KCl). Mediated redox catalysis of H₂O₂ and bio-functionalization with glucose oxidase for glucose detection were achieved by the bioelectrode providing a proof for potential biosensing applications.     

钨酸铋/还原氧化石墨烯二氧化氮传感器的研制EI北大核心CSCD

The bismuth tungstate / reduced graphene oxide (Bi2 WO6 / rGO) composite material was synthesized by a simple and one-step hydrothermal method, and the nitrogen dioxide gas sensor was prepared based on this material. The crystal phase, morphology and microstructure of composite were studied by XRD, Raman spectra, SEM and TEM,respectively, which confirmed that composite of Bi2 WO6 and rGO was successfully synthesized, and Bi2 WO6 / rGO composite material with flower-like superstructure was obtained. The composite material was loaded on the interdigital electrode to prepare the nitrogen dioxide gas sensor, while the properties of gas sensor were systemically investigated by using homemade gas-sensing test device. The results indicated that the Bi2 WO6 / rGO composite gas sensor had higher selectivity, higher response value and better long-term stability. The response value of Bi2 WO6 / rGO composite gas sensor was 28. 35% towards 47. 03 mg / m3 NO2, which was 3. 5 times of pure rGO gas sensor. The response time was 55 s with the recovery time of 549 s and the detection limit of 62 μg / m3. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Nickel sulphide-reduced graphene oxide composites as counter electrode for dye-sensitized solar cells: Influence of nickel chloride concentration

Nickel sulphide-reduced graphene oxide (NiS-rGO) composite films have been prepared via modified Hummers’s method assisted with spin coating technique. The NiS-rGO samples were then employed as counter electrode in a dye-sensitized solar cell (DSSC). The main aim of this work is to investigate the relationship between the concentrations of NiCl₂ with the properties of NiS-rGO and performance parameters of the device. The dominant rGO and minor NiS phase exist in the composite. The morphology of the composite is white strips rGO and NiS agglomerate particle. The element of C, O, Ni and S present in the composite. The highest η of 1.04% and J_sc of 7.39 mA cm⁻² were obtained from the device with 0.06 M NiCl₂ resulted from the longest carrier lifetime. The photovoltaic parameters results reveal that NiS-rGO composite has potential to become as a free platinum counter electrode of DSSC.     

Facile synthesis of Fe3O4/reduced graphene oxide/polyvinyl pyrrolidone ternary composites and their enhanced microwave absorbing properties

In this paper, ternary nanocomposites of Fe₃O₄/reduced graphene oxide/polyvinyl pyrrolidone (Fe₃O₄/rGO/PVP) as a novel type of electromagnetic microwave absorbing materials were synthesized by a three-step chemical approach. First, Fe₃O₄ nanospheres were made by solvent thermal method. Successively, the Fe₃O₄ particles were assembled with rGO after having activated by para-aminobenzoic acid. PVP grafting and reduction of GO happened simultaneously in the third step. It is found that the electromagnetic absorption (EA) performance of synthesized ternary composites with suitable PVP amount had been significantly enhanced comparing to Fe₃O₄ and Fe₃O₄/rGO. Merely 15?wt% low loading in paraffin and thin as 2.8?mm can reach effective EA bandwidth (below ?10 Db) of 11.2?GHz, and the highest reflection loss reached ?67?dB at 10.7?GHz. It was demonstrated that these composites show an effective route to novel microwave absorbing material design.     

A novel lable-free electrochemical immunosensor for carcinoembryonic antigen based on gold nanoparticles-thionine-reduced graphene oxide nanocomposite film modified glassy carbon electrode

In this paper, gold nanoparticle-thionine-reduced graphene oxide (GNP-THi-GR) nanocomposites were prepared to design a label-free immunosensor for the sensitive detection of carcinoembryonic antigen (CEA). The nanocomposites with good biocompatibility, excellent redox electrochemical activity and large surface area were coated onto the glassy carbon electrode (GCE) surface and then CEA antibody (anti-CEA) was immobilized on the electrode to construct the immunosensor. The morphologies and electrochemistry of the formed nanocomposites were investigated by using scanning electron microscopy (SEM), ultraviolet-visible (UV-vis) spectrometry, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). CV and differential pulse voltammetry (DPV) studies demonstrated that the formation of antibody-antigen complexes decreased the peak current of THi in the GNP-THi-GR nanocomposites. The decreased currents were proportional to the CEA concentration in the range of 10-500 pg/mL with a detection limit of 4 pg/mL. The proposed method was simple, fast and inexpensive for the determination of CEA at very low levels.     

Electrochemical detection of selenium using glassy carbon electrode modified with reduced graphene oxide

In this work, a simple experimental procedure was reported for the electroanalytical determination of selenium (IV) using reduced graphene oxide (rGO) to modify glassy carbon electrode (GCE). The rGO was obtained by reduction of graphene oxide obtained via Hummer’s method. The synthesised rGO was characterised using X-ray diffraction, Raman spectroscopy, scanning electron microscope (SEM), energy-dispersive spectroscopy and transmission Electron microscopy (TEM). GCE was modified with rGO and the electrochemical properties of the bare and modified electrode were investigated using cyclic voltammetry and electrochemical impedance spectroscopy. The results obtained showed that the modified electrode exhibited more excellent electrochemical properties than the bare GCE. The optimum conditions for detection of selenium in water using square wave anodic stripping voltammetry were as follows: deposition potential ?500 mV, pH 1, pre-concentration time of 240 s and 0.1 M nitric acid was used as supporting electrolyte. The linear regression equation obtained was I (µA) = 0.8432C + 9.2359 and the detection limit was calculated to be 0.85 μg L^?1. However, Cu(II) and Cd(II) are the two cations that interfered in the analysis of selenium in water.

The sensor was also applied for real sample water analysis and the result obtained was affirmed with inductively coupled plasma optical emission spectroscopic method. It is believed that our proposed sensor hold promise for practical application.